MISC B/R REPAIR WORK PLASTERING, FLOORING, SANITARY WORK ETC IN RA LINES OF SOUTH AREA UNDER GE NASIRABAD

Amount

Taking down cement plastering of any description on brick / stone/ concrete wall / ceiling surfaces of any description incl racking out joints hacking for key, scrubbing down with water etc, complete all as specified and directed by Engr-in-Charge.

M&L for rendering in cement mortar (1:6), 15mm thick on other than fair faces of stone masonary surfaces finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.

M&L 5mm thick rendering in cement mortar in CM (1:3) on ceiling finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.

M&L 15mm thick rendering in cement mortar (1:4) mixed with water proofing compound @3% by weight of cement on fair faces of brick work or concrete surfaces, finished even and smooth complete all as specified and directed by Engr-in-Charge. Note:- WPC measured and paid separately.

M&L for rough cast plaster mix with crusted stone (6-10mm), sand and cement in the ratio 1: 1.5: 1, over 15mm thick rendering in CM 1:4 on stone / brick masonary wall surfaces complete all as specified and directed by Engr-in-Charge.

Dismantling loose /disintegrated portion of RCC Chajjas, bend shelves, beams balconies and similar work at any position or any height and dobbing out with PCC 1:1:5:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished required shape including applying anti corrosive paint on exposed surfaces of reinforcement and provision of necessary supporting form work and including 10mm thick plastering in CM 1:4, finished fair and even, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered surface of wall and apply two coats of oil bound distemper over a coat of 1mm average thick wall care putty, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered ceiling surfaces and applying two coats of white wash complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of primer, complete all as specified and directed by Engr-in-Charge.

M & L for newly rough cast plastered surfaces of wall and applying two coats of weather proof acrylic emulsion paint over a coat of primer, complete all as specified and directed by Engr-in-Charge. MAKE :- ASIAN/APEX/BERGER (Weather coat all guard)

Dismantling floor, hearth or wall tiles, including cement mortar, removing serviceable tiles from site & rubbish off the premises, complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (unreinforeced) in ground floors and pavings n. exc 15cm thickness (below or above ground level), complete all as specified and directed by Engr-in-Charge.

M&L 25mm thick PCC (1:2:4) type B0 using 12.5mm graded stone aggregate as in floors complete all as specified and directed by Engr-in-Charge.

M&L non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6, complete all as specified and directed by Engr-in-Charge.

M&L non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.18 Sqm but not exc 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.

All as per item No.15.00 above but in skirting over 10mm thick screeding in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.

M&L glazed ceramic coloured tiles 7 to 8 mm thick in vertical surfaces area of each tile of exc. 0.11 Sqm and but not exc. 0.18 Sqm set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed plaster in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for 18mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window -cills, cooking platforms and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl rounding of edge laid over 15mm thick screed bed in CM (1:6) including rounding of edges of stone slabs one edge, complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters (without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts, complete all as specified and directed by Engr-in-Charge.

Taking down shutters of any description exc 1.0sqm and n. exc 2.00 sqm each shutter complete all as specified and directed by Engr-in-Charge.

M&L for taking down shutters of any description exc 1.00 sqm but n. exc 2.00 sqm of each shutter and refixing in the same opening after necessary resecuring or easing & adjusting etc complete all as specified and directed by Engr-in-Charge.

S & F Flush shutters 30mm thick, solid core construction, with block board core and plywood face panels commercial type on both side and both facesis covered with approved pattern with Decorative coloured laminate type 1 of 0.9 mm thick and all around side faces covered with 10mm thick 1st class hard wood liping duly polished complete all as specified and directed by Engr-in-Charge.

S&F solid PVC moulded door frame of size 50mm x 47mm made out of 5mm prelam coloured PVC sheet uses instead of plain colour PVC sheet & edges will be painted to match with prelam sheet as reinforced with MS square tube and fixing in opening as specification & drawing complete all as specified and directed by Engr-in-Charge.

S&F factory made solid PVC moulded door shutter with wood free EPS, 28to30mm thick, (styles) with 2,4 or 6 raised panel design with 2mm thick moulded Prelam (Nut Brown Colour )PVC sheet on the front face & 2mm Prelam (Nut Brown colour ) PVC sheet on back face, and fixing in the frame at site as per specification and drawings on page 161 of SSR (Part -II) 2010 complete all as specified and directed by Engr-in-Charge.

S&F mild steel framed work such as grills, grating cooler stands, etc, with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed by Engr-in-Charge.

Taking down old u/s steel window / ventilator and S & F Steel window/ventilator factory made, out of MS hollow section 79mm x 39mmx1.6mm thick frame with double shutter (glazed & wiregauged shutters) made out of Z section using flush butt welding and tennon riveting all as per IS 1038/83, dobby hinges shall be provided to both shutters, Locking arrangements as per sample approval by GE, provided with knob, 10mm MS square bars in grill, Z section handle 100mm size and 150mm long hook & eye welded to frame and shutter, four Nos lugs welded to frame inculding necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fast and making good in PCC 1:2:4 type B-1, and plaster with finishes to match the existing surfaces, including synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed by Engr-in-Charge. Note : Wire mesh and sheet glass shall be measured & paid separately under respective items.

Hacking out old broken glass (any size, quality or description) from metal frames, glazing with putting or beads and S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm.m in each pane, complete all as specified and directed by Engr-in-Charge.

Hacking out old broken glass (any size, quality or description) from metal frames, glazing with putting or beads and S&F 3mm thick figured glass panes, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm.m in each pane, complete all as specified and directed by Engr-in-Charge.

S&F 3mm thick glass, ordinary quality, 3mm thick fixed with oil putty size of glass not exc 0.50 sqm in each pane, complete all as specified and directed by Engr-in-Charge.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in square n. exc 0.50 Sqm in each pane, complete all as specified and directed by Engr-in-Charge.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed tinned or stainless steel wire staple complete all as specified and directed by Engr-in-Charge.

S&F in repair of stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed tinned or stainless steel wire staple complete all as specified and directed by Engr-in-Charge.

Dismantling boards (wooden, fiber, pulp, insulation etc.) any thickness, including cover fillets etc complete all as specified and directed by Engr-in-Charge.

S & F in repairs 18/19mm thick MDF board one side laminated decorative type with decorative face veneer on one face fixed complete, including teak wood lipping 19 x 6mm thick fixed with nails in shelves, partition and palmet boxes, shelves, almirah book cases, toilet boxes, racks, cup board shutter and similar works complete all as specified and directed by Engr-in-Charge.

S&F in continous (Piano) hinges, mild steel, bright finish, width of flaps (when open) 30mm complete all as specified and directed by Engr-in-Charge.

S&F 300mm long Stainless steel sliding door bolt with hasp and staple (bolt type) and fixing clips, complete all as specified and directed by Engr-in-Charge.

S&F in repairs Stainless steel butt hinges, ISI marked of size 100mm, complete all as specified and directed by Engr-in-Charge.

S&F 150mm long stainless steel barrel tower bolts complete all as specified and directed by Engr-in-Charge.

S&F 150mm long Stainless steel pull handles, complete all as specified and directed by Engr-in-Charge.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed by Engr-in-Charge.

S&F 150mm long extrueded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engr-in-Charge.

S&F 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge and anodised ISI marked and fixed, complete all as specified and directed by Engr-in-Charge.

S&F in repair floor door stopper over all length of cover plate 100mm of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floors etc complete all as specified and directed by Engr-in-Charge.

S&F in repair Mild steel 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engr-in-Charge.

S&F in repair hasp and staple of size 100mm aluminium safety type including bolt to hinge plate and fixing screw etc complete all as specified and directed by Engr-in-Charge.

S&F in repairs, 25mm dia stainless steel curtain rod heavy duty with a pair of decorative Curtain Finials/ knob & heavy Curtain Support Bracket for rod made of stainless steel, etc. complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete of any description from sunken floor (ground or Ist floor) and removing and depositing materials exc 50 mtrs depositing level n exc. 1.5 m aove the starting point complete all as specified and directed by Engr-in-Charge.

M&L for mass concrete filling using PCC (1:5:10) type E2 in sunken floor complete all as specified and directed by Engr-in-Charge.

M&L for 20mm thick cement plaster in CM 1:4 mixed with water proofing compound @ 3% and applying water proofing treatment on sunken portion with acrylic based polymer modified cementitious composit compound as specified and approved & cement slurry two layers, Ist layer @ 0.488 Kg/Sqm mixed with composit compound @ 0.253 Kg/Sqm & the second layer slurry @ 0.242 kg/Sqm mixed 0.126 Kg of compound complete with min 4 hours allowed to air cure between these layers and applying 200 u polyfilm with adhesive, complete all as specified and directed by Engr-in-Charge.

M&L PCC (1:3:6) type C-1 using 20mm graded stone aggregate, 75 mm thick as in plinth protection finished fair & even in alternative bays n. exc 2M in length and joints filled with butmen mastic 1:3 (1 Bitumen : 3 Sand) complete all as specified and directed by Engr-in-Charge.

S & F in repairs Squatting pattern Water closet, Orissa pattern of vitreous chinna Size 580x440mm wide with integral foot rest etc complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous china wash down water closet pedestal pattern pan white with trap including connection to existing out joint pipe, flushing pipe or Cistern, antisyphonage pipe, including making, etc complete including making good to floor etc complete all as specified and directed by Engr-in-Charge.

S&F in repair wash basins vitreous china, white /coloured flat back size 550 x400mm fixed including bracket complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC low level flushing cistern syphonic action type white with inlet ball valve, handle including brackets 10 ltrs capacity etc complete all as specified and directed by Engr-in-Charge.

S&F in repair CP brass shower rose with or without swivel joints 100mm size including fixing to steel pipe or union complete all as specified and directed by Engr-in-Charge.

S & F in repairs PVC connections 15mm size with PTMT nuts and bolts of length 450mm etc complete all as specified and directed by Engr-in-Charge.

S&F in repair Basin Mixer cast copper alloy, fancy type chromium plated screwed down high, pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed to 15mm bore of pipe complete all as specified and directed by Engr-in-Charge. Make : Prayag, Cat No 7250. Prima, Cat No PDL-5216.

S&F in repair angle valves 15mm bore , cast copper alloy chromium plated fancy type, screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed by Engr-in-Charge.

S&F in repair 25mm bore Gun Metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair 32mm dia PTMT waste pipe suitable for WHB or Sinks etc complete all as specified and directed by Engr-in-Charge.

S & F in repairs grating round 140mm dia stainless steel fixed to Floor trap/Nahni trap with CM 1:6 etc complete all as specified and directed by Engr-in-Charge.

S&F in repair bib tap standard of PTMT 15mm bore of any colour screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair stainless steel sinks with draining board made of 1mm thick sheet with over all size 915mm x 460mm and bowl size 410mmx330x160mm for kitchen or laboratory with pluge washers and waste, including bedding in cement mortar on to dwarf walls or including fixing centilever bracket and connecting uinon to waste pipe complete all as specified and directed by Engr-in-Charge.

S&F in repairs stainless steel plate rack of size 914 x 609 mm or equivalent in jayna/Nirali as approved by GE complete all as specified and directed by Engr-in-Charge.

S & F in repairs waste coupling CP 32mm dia for glazed ware basins etc with long screwed shanks and fly nuts flanged etc complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15mm bore cast copper alloy chromium plated bib tap fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC (SWR) floor trap plain with grating incl jointing with solvent cement of 75mm dia, complete all as specified and directed by Engr-in-Charge.

S&F in repair tubular towel rail, chromium plated brass 20mm dia 'D' type 60CM long between flanges complete all as specified and directed by Engr-in-Charge.

S&F in repairs for Toilet fittings Health faucet complete all as specified and directed by Engr-in-Charge. Make : Jaquar or equivalent

S&F in repairs PVC cabinet of size 450 mm x 600 mm with mirror of good quality with shelves in bath fixed complete to walls complete all as directed by Engineer-in-Charge Make : Prayag or equivent.

Taking down old unserviceable 15mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed by Engr-in-Charge.

Taking down old unserviceable 20mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed by Engr-in-Charge.

Taking down old unserviceable 25mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed by Engr-in-Charge.

S&F 15mm bore, water tubing, medium grade, galvanised with all fittings and fixed to walls, ceiling or laid in floors / trenches complete all as specified and directed by Engr-in-Charge.

S&F 20mm bore, water tubing, medium grade, galvanised with all fittings and fixed to walls, ceiling or laid in floors / trenches complete all as specified and directed by Engr-in-Charge.

S&F 25mm bore, water tubing, medium grade, galvanised with all fittings and fixed to walls, ceiling or laid in floors / trenches complete all as specified and directed by Engr-in-Charge.

Refixing old 15mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors trenches including necessary cleaning, cutting, screwing complete all as specified and directed by Engr-in-Charge.

Refixing old 20mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors trenches including necessary cleaning, cutting, screwing complete all as specified and directed by Engr-in-Charge.

Refixing old 25mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors trenches including necessary cleaning, cutting, screwing complete all as specified and directed by Engr-in-Charge.

Taking down the existing material and S&F Mild Steel handle right or left suitable for Mild Steel window duly painted with two coats of stove enamelled paint etc. complete all as directed by Engr-in Charge.

S&F in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with clamp, complete all as specified and directed by Engr-in-Charge.

S&F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with clamp complete all as specified and directed by Engr-in-Charge.

S & F in repairs 75mm bore PVC(SWR) bends with oval access door of any radius complete all as specified and directed by Engr-in-Charge.

S & F in repairs 110mm bore PVC(SWR) bends with oval access door of any radius complete all as specified and directed by Engr-in-Charge.

S & F in repairs 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified and directed by Engr-in-Charge.

S & F in repairs 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engr-in-Charge.

M&L for prepartion of new or previously untreated wood and wood based surfaces of any description not otherwise described over 10cm width girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed by Engr-in-Charge.

S&F in repair 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 grams) complete all as specified and directed by Engr-in-Charge.

Dismantling of exisiting unserviceable RCC / PVC water tank of Capacity not exceeding 500 litre each and S&F in repair rotational moulded polyethylene water storage tanks of 500 Ltrs capacity (cylindrical vertical with closed top), Triple layer,hoisted and fixed in position complete all as specified and directed by Engr-in-Charge. Make: Sytex, Polycon

Dismantling of exisiting unserviceable RCC / PVC water tank of Capacity not exceeding 1000 litre each and S&F in repair rotational moulded polyethylene water storage tanks of 1000 Ltrs capacity (cylindrical vertical with closed top), Triple layer,hoisted and fixed in position complete all as specified and directed by Engr-in-Charge. Make: Syntex, Polycon

M&L 75mm thick cement concrete type D-2 1:4:8 (40mm graded stone aggregate ) as in floors / pavings complete all as specified and directed by Engr-in-Charge.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment coloured, reflective type of approved quality complete all as specified and directed by Engr-in-Charge.

M&L for sand filling under floor in foundations inclding watering and consolidation complete all as specified and directed by Engr-in-Charge.

M & L for providing precast cement concrete 1:3:6 Type c1 using 20mm graded aggregate as in kerbs stone (100mm thick) or mud stops, rounded or chamfered on edges complete fixed in position & set in CM (1:4) incl necessary excavation required & removal of spoil to a distance exc 50 m all as specified and as directed by the Engineer-in-Charge.

Demolition of brick or stone Masonary built in cement mortar etc complete all as specified and directed by Engr-in-Charge.

M&L for walling Random rubble masonary uncoursed well bonded bedded and solidly hearted and built in cement mortar 1:6 etc complete all as specified and directed by Engr-in-Charge.

All as per item No. 99.00 here in before but except stone complete all as specified and directed by Engr-in-Charge.

M&L for old size brick work with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for brick work with flyash bricks, straight or curved on plan exc 6M mean radius built in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.

M & L for complete removal of existing treatment of old plastered surfaces of wall and applying two coats of oil bound distemper having VOC content lessthan 50 gms /Ltr of approved manufacturer of required shade and colour, over a coat of primer over & including 1mm thick finished coat of white wall care white putty (JK/Birla), complete all as specified and directed by Engr-in-Charge.

S & F in repair magnet door catcher 30mm size of approved quality & suitable for cupboard shutter & cabinet complete all as specified and directed by Engr-in-Charge.

S&F in repairs to existing butt hinges/single action spring hinges/ double action spring hinges/projecting type hinges/box type hinges by welding the same or new to existing door frame/mild steel window frame complete all as specified and directed by Engr-in-Charge. NOTE: Above quoted rate is inclusive of taking down/refixing of shutters if required at site. No extra shall be admissible on this account

S&F in repair Deco door seal size 1.5" width door bottom sealing strip draft Excluder stopper with aluminium plate & nylon bristles for weather stripping complete all as specified and directed by Engr-in-Charge.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-Charge.

M&L RCC, type B-1 (1:2:4) using 20mm graded aggregate in, slab supported on wall, walls beams and columns in floors, roof landings, Chajjas and platform etc. including form work, complete all as specified and directed by Engr-in-Charge.

M&L for precast cement concrete 1:2:4 type B-1(using 20mm graded aggregate) as in cover slabs, shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for TMT bars 10 mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending, spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engr-in-Charge.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc, complete all as specified and directed by Engr-in-Charge.

M & L for PCC 1:2:4 Type B1 using 20 mm graded aggregate as in surface channels and drains & coping, edging rounded or chamfered type etc complete all as specified and as directed by the Engineer-in-Charge.

TANISHQ ENTERPRISES

M/S SHIVA TRADERS

TARA CHAND JI GOMA CONSTRUCTIONS CO.

ASHISH SHARMA