PROVN OF 03 X CULVERTS WITH HANDRAILS FOR WATER CROSSING AT JFC AREA AT NDA KHADAKWASLA

M&L excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and as directed.

M&L excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard rock (Manjara and similler Rock)complete all as specified and as directed.

M&L Cement concrete 1:4:8 type D2(40mm graded aggregate) in as foundations, filling and mass, concrete complete all as specified and as directed.

M&L stone walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, in retaining walls, abutment for culvert and similar works built in CM 1:4 complete all as specified and as directed.

M & L RCC Design mix M-30 (20 mm aggregates) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M & L RCC Design mix M-30 (20 mm aggregates) Fins, fascias, louvres, parapets, and railings exc 60cm in height, newels, balustrade, and the like complete all as specified and as directed.

MS TMT bars 10mm dia and over cut to length, bent to shape required, including cranking bending spirally, binding with and including mild steel wire annealed not less than 0.9mm dia complete all as specified and as directed.

M&L Formwork in Rough finished flat concrete faces of Soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work , not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

M&L Formwork in Rough finished flat concrete faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses,Box culvert etc.; vertical or to batter complete all as specified and as directed.

M& L Boulder pitching, laid dry, hand packed tightly extra over hammer dressed facings, with maximum depression on face from straight edge held against the dressed surface and grouted with cement and sand mortar 1:6 complete all as specified and as directed.

M&L Flush pointing to squared rubble masonry, coursed or uncoursed or brought upto course in CM(1:4) etc.complete all as specified and directed

M&L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:3:6) type C1(20 mm graded aggregate) and setting in CM 1:6 complete all as specified and as directed.

M&L for 15mm thick External cement plaster in CM 1:4 on brick work/concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for preparion of new plastered surfaces of walls and applying of two coats of Cement base paint over a coat of alkali resistant primimimg paint complete all as specified and as directed.

M& L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M & L surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in Soft/loose soil complete all as specified and as directed.

M&L broken stone hardcore of gauge, n exc 63mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rolled/ rammed to true surfaces complete all as specified and as directed.

M&L for 100mm thick PCC type D2 , 1:4:8(40mm graded aggregate) in floor including finishing cement concrete even and smooth without using extra cement complete all as specified and as directed.

M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.

M/L 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid in floors ,as in weep hole complete all as specified and as directed.

M & L Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and as directed.

M & L Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade A (sika,Choksey or Approved make) complete all as specified and as directed.

M & L Cement Concrete type B2 ,1:2:4 (40mm graded aggregate) in surface channels and drains complete all as specified and as directed.

M&L cement concrete type B0, 1:2:4 (12.5 mm aggregate) in plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

Removal of excavated material exc 1.50 Km. & n exc 5 km & depositing out side of MOD Land complete all as specified and as directed. (Note: Gate pass to be enclosed with RAR)

M & L Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and as directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.