Loading
Loading…
Loading…
Tender Value
₹99,500
EMD Value
₹1,990
Closing Date
15 Sept 2026, 6:55 pm
Executive Engineer REW Pulwama
Executive Engineer REW Pulwama
FINDC2627102546 Construction of lane from house of Shabir Ah Wani to house of Ghulam Hassan Sheikh at Sheikh Mohlla Achan
2026_RDPR_320364_123
e- NIT No. 92/2026-27 Dated 10-08-2026
Open Tender
Civil Works
Percentage
Pulwama
Please refer Tender documents.
2 documents required · 2 mandatory
₹200
Executive Engineer REW Pulwama
₹1,990
10 Aug 2026
10 Aug 2026
16 Sept 2026
10 Aug 2026
15 Sept 2026
10 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Surface dressing of ground not exceeding 15cm in depth including removing of rack vegetation and inequalities & disposal of rubbish.Complete job. | 66.91 | cum | - | - |
| 2 | Providing and laying of dry stone Soling including carriage from 10 km | 6.06 | cum | - | - |
| 3 | Providing and laying in position cement concrete of specified grade including curing but
excluding the cost of centring and shuttering. All work upto plinth level with:
4.4.7 1:4:8 (1 cement : 4coarse sand : 8graded stone aggregate 40 mm nominal size) | 4.08 | cum | 1 | ₹4.08 |
| 4 | Chequerred precast cement concrete tiles 22mm thick in footpath and
courtyard, jointed with neat cement slurry mixed with pigment to match
the shade of the tiles, including rubbing, cleaning and curing complete,
on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . | 55.76 | Sqm | 1 | ₹55.7 |
| 5 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.
11.3.1 25mm thick with 12.5 mm nominal size stone aggregate. | 22.3 | sqm | - | - |
| 6 | carriage of sand and bajari from 15 kms i/c head load 100m | 5.55 | sqm | - | - |
| 7 | Manufacturing supplying and fixing of sign board of 2mm thick MS sheet support frame of M.S. angle iron of size 40x40x5mm and Photographs (as approved by Engineer in-charge) (To be paid as per actual) | 1 | LS | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.82 MB
BOQ_1064973.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].