PROVISION OF YOGA MEDITATION CENTRE AT MILIT GIRINAGAR PUNE 25

Amount

B/R PORTION Excavating in trenchs not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for foundation, laying of pipes/cable etc in any type of soil and getting out complete all as specified and directed.

M&L for Plain cement concrete type D-2 (1:4:8) using 40 mm graded stone aggregate as in foundations complete all as specified and directed.

M & L for RCC M-25 design mix for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete all as specified and directed.

M & L for RCC M-25 design mix for columns, pillars, piers, struts & posts complete all as specified and directed.

M & L for RCC M-25 design mix for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M & L for RCC M-25 design mix for chajjas complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to battercomplete complete all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified and directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L for formwork to chullah hoods, chajjas, troughs and similar items including edges etc complete all as specified and directed.

M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 5mm dia and over upto and including 10mm dia, cut to length, bent to shape required, including cranking, in stirrups, spacers and binders, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated materials exc 250m but n.exc 500m and deposited where directed in soil complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410- W (Gde- E-250) quality- B complete all as specified and directed.

M&L for Two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces exc 10 cm width or girth etc complete all as specified and directed.

S&F of gyproc white water proofing gypsum moisture resistance boards rectangular for false ceiling 10 mm thickness moisture resistance < 5% total water absorption , acoustic waterproofing suspended ceiling system with prima fine fissured tile with semi concealed grid , the tile should have humidity in module sizeof 600x 600x10 mm with Bio block coating on the face of the tile, impact resistant and suitable for green bldg application, with recycled content of 63% including semi concealed grid system consisting of 15 mm white flange incorporating 6 mm central reveal in white/black colour with web height of 38 mm and load carring capacity of minimum 11.68 kg/sqm.Silhouette. main runner and cross tees to have mitred ends & birdmouth notches to provide mitred cruciform junction. The 'T' sections have galvanising of 120 gms/sqm and passed through 500 hrs of salt test. all as per manufacutrer's instructions Complete all as specified and as directed.

M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C-1 using 20 mm graded stone aggregate, exc. 10 cm in width and setting in CM 1:6, complete all as specified and directed.

M&L for rendering 15 mm thick in two layers (10+5) mm and, 5mm thick coat using WPC @3% by weight of cement over 10 mm thick on stone/brick masonary work/concrete surfaces in cement mortar 1:4 finished surfaces even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 10 mm thick on brick /stone masonry/concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified and directed

M & L for two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces over 3mm thick coat of wall care putty in two layers on new plaster surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for two coats of acrylic emulsion paint (lustar paint) internally over a coat of acrylic primer over 2mm thick coat of waterproof putty in two layers on new plaster surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for 100 mm thick Hardcore of gauge not exc. 63mm deposited, spread and levelled in layers not exc. 15cm thick watered and rammed to a true surface complete all as specified and directed.

Spreading and levelling in layers available soil under floors n exc. 25 cm thick well ramming including watering complete all as specified and directed.

M & L for 75mm thick plain cement concrete 1:4:8 type D-2(using 40mm graded stone aggregate) as in subbase to floor complete all as specified and directed.

M & L for 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in floor levelling course and in similar situations complete all as specified and directed.

M&L for full body colour Marble tiles glossy finish 9-10 mm thick (square/regtangular) polished ,600x600 mm stain proof and durable ad abrasion resistant with high flexural strength (area of each tiles not exc 0.36 sqm in floors) and joineted neat in cement slurry and pointed in white or colour cement to match with over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for full body colour Marble tiles glossy finish 9-10 mm thick (square/regtangular) polished , stain proof and durable ad abrasion resistant with high flexural strength area area of each tiles ( 600 mm X 1200 mm) or not exc 1.28 sqm in skirting/vertical surfaces etc. as per manufactureres specification confirm to IS 13630 and ISO 10545 and joineted neat in cement slurry and pointed in white or colour cement to match with over & including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M & L for granite 16-18mm thick black/red colour (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

S & F pressed steel frames of size 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, as per ISI mark, including PCC (1:3:6), type C-0,( using 12.5 mm graded stone aggregates) as in filling of pressed steel frames complete all as specified and as directed.

S & F aluminium powder coated three track sliding window with two glazed shutters, one 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make as specified. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

S&F anodised powder coated (thickness of powder coating not less than 50micron) aluminim window and ventilator shutters, fixed type without sash bar, aluminium section weight not less than 0.55kg/mtr including necessary joining cleats, glazing clips, rubber packing, screws etc complete all as specified and directed.

M&L for 4mm thick figured glass, pin head type and glazing with not exc 0.5Sqm in each pane to aluminium frame work for ventilators complete all as specified and directed.

S&F solid PVC coloured door frame of size 50 x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube as per specification and drawing complete all as specified and directed.

S&F factory made solid PVC moulded door shutter 28 to 30mm thick, with 2,4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on front face and 2mm plain colour PVC sheet on back face with particle board core complete all as specified and directed.

S & F Powder coated aluminium sections (minimum thickness of powder coating 50 micron) for Frames, shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed. Note: Shutter Shall be including handles, hinges, holdfasts, bolts all fittings and fixtures

S&F Door closer Aluminium (extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed.

S & F 100mm butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-12 complete all as specified and directed.

S&F 300 mm long Aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and as directed

S&F 140 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F 150mm brass handles, cast type, polished bright complete all as specified and directed.

S&F 200mm long decorative Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F Aluminium handles, cast type anodised 125 mm long of extruded section cast aluminium alloy complete all as specified and directed.

Supply, laying & testing CPVC pipes SDR 11, 20mm dia on walls/ceiling with all fittings complete all as specified & directed.

All as per item here in before but 15mm dia complete all as specified and directed.

M&L for cutting chases, pinning in stone, concrete block walls making good to facings where required and pointing in cement mortar 1:3 to concealed water tubing and making good complete all as specified and directed.

S&F Gun metal globe or gate valve ISI marked with iron wheel head screwed both ends for 20mm dia iron pipe, complete all as specified and directed.

Supply and fix Vitreous china coloured wash down water closet EWC cascade type ‘P’ trap/ S trap including seat cover and flushing cistern low level, valveless, symphonic action type with inlet ball valve, float and handle complete all as specified and as directed.

S&F Vitreous china Urinal, full stall type, white with waste pipe and CP brass spreader complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and union for discharge pipe including CP Urinal spreader for fixing with 15 mm dia pipe complete all as specified and directed.

S&F Counter top Wash hand basin, vitrous china, coloured flat back of size 540X360X150 mm including brass waste coupling, CP bottle trap 32mm size with 250mm & 190mm long wall connection pipe & wall flange, 15mm dia fancy type single lever tall body swan neck pillar tap chromium plated with 150mm extention body fixed spout without popup waste system with 600mm long braided hoses complete all as specified and directed.

S&F Chromium Plated Push type, auto closing concealed Urinal Flush valve with wall flange complete all as specified and as directed.

S&F Bib taps fancy type chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as dierected.

S&F fancy type, chromium plated angular stop cock fixed with wall flange for 15mm bore of pipe complete all as specified and as directed.

S&F stainless steel grating doom 125mm dia complete all as specified and directed.

S&F Chromium Plated Toilet Paper Holder complete all as specified and directed.

S&F soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed

S&F Hand shower (health faucet) (ABS Chromium plated) with 8mm dia, 1.2mtr long flexible tube and wall hook complete all as specified and as directed.

S&F 15mm dia bore, two way bib tap, long body, fancy type, brass chromium plated, with crutch handle, screwed down for UPVC/iron Pipe complete all as specified and directed.

S&F Brass chromium plated tubular towel rail 20mm dia complete all as specified and directed.

S&F Brass chromium plated bracket for towel rail complete all as specified and directed.

M&L for 100mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for PVC (SWR) waste and vent pipe 100mm bore in any length with rubber ring joint laid in floor or wall complete all as specified and directed.

M&L for PVC (SWR) waste and vent pipe 75mm bore in any length with rubber ring joint laid in floor or wall complete all as specified and directed.

S&F for Stack clamps for bore (any dia) of pipe out of 50 mm by 5 mm flat iron and 16mm dia round iron stays,100mm including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F PVC (SWR) bends of any radius 110mm bore complete all as specified and directed.

S&F PVC (SWR) bends of any radius 75mm bore complete all as specified and directed.

S&F 110mm dia PVC (SWR) vent cowl complete complete all as specified and directed.

S&F 75 mm dia PVC (SWR) vent cowl complete complete all as specified and directed.

S&F PVC (SWR) junction double ( single T) of size 110mm bore jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) reducer 110mm to 75mm bore jointing with solvent cement complete all as specified and directed.

S&F 1000 ltrs capacilty, Rotational moulded polythylene water storage tank ISI marked (cylindrical vertical with closed top) hoisted in position including ball brass valve 20 mm high pressure with polythene float and fly nut , inlet & outlet pipe complete all as specified and directed.

S&F RCC Hume pipe septic tank for 10 Users placed in position complete all as specified and directed.

M&L for Construction of soakage wells including excavation & earthwork in any type of soil, foundation in PCC 1:3:6 type C2 walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM (1:3) RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC filled with brick bats of size 1.2 M dia X 3 M effective depth complete all as specified and directed.

S & F for reinforced concrete pipes,bore of pipe 150 mm class NP2, laid and jointed complete with collars complete all as specified and directed.

M&L for concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C-2 for 150mm size of drain pipe complete all as specified and directed.

S&F factory made 50mm thick, 600 x 600 mm manhole cover medium duty with additional frame finished the surface even and fair including reinforcement as per manufacturer's design and set in CM 1:4 and handles of any description and in any position complete all as specified and directed.

M & L for Plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in surface channels of manholes & like fair seven finished using extra cement complete all as specified and directed.

E/M PORTION M&L Point wiring complete with 1.5 sqmm single core PVC insulated and unsheathed cable 1100 volts, FRLS grade with multistranded copper conductor ISI marked drawn through heavy duty PVC conduit fixed in walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm stranded copper conductor cable as earth continuity conductor and connected to common earth dolly including concealed modular flush boxes including Modular box , modular cover plates with frame mounting for housing the switches, socket outlets etc, complete all as specified and directed. (a) One light point/fan/exhaust fan/ Bell point controlled by one way switch.

(b) One 3 pin switch socket outlet point 5 Amps on independent board.

(c) One 3 pin switch socket outlet point 5 Amps on same board with other switch.

All as per item above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 3 core X 4 sqmm size complete all as specified and directed.

S & Fix modular switch 1 way 6A, 1 module complete all as specified and directed.

S & Fix modular switch1 way 16A, 1 module complete all as specified and directed.

S & Fix modular socket out let 6A 2/3 on combined 2 module complete all as specified and directed.

S & Fix modular socket out let 6A/16A-2/3 pin combined 2 module complete all as specified and directed.

S & Fix Ceiling rose surface backlite 65x50mm 3 terminals complete all as specified and directed.

S & Fix 2 x 2 Ultra modern recess mounting 36 watts luminair with high performance LEDs, suitable for mounting with Armstrong/Grid ceiling complete all as specified and directed.

S & Fix Batten for LED tube light fitting 10 W complete accessories complete all as specified and directed.

Supply & Fix ceiling fan (after assembling the same) with the existing fan hook/box, 1200 mm (48") sweep, Min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor(BLDC) and connecting up complete with and including three core copper conductor flexible cord of 0.5 Sqmm cross sectional area, of required length including fan rod less than 16mm dia from ceiling rose to procelain connector block of the fan, complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including complete with complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed.

S & Fix sheet metal enclosure distribution board SPN, 8 ways 240 volts, with 100 amps rated bus bar, with IP 43 protection and double door, suitable for mounting MCBs complete all as specified and directed.

S & Fix of MCB single pole and neutral, 240 volts, 6 to 40 Amp, rupturing capacity 10 KA, ‘C’ series complete all as specified and directed.

S & Fix of MCB single pole and neutral, 240 volts, 63 Ampere, rupturing capacity 10 KA, ‘C’ series complete all as specified and directed.

S & Fix of MCB single pole, 240 volts, 6 to 40 Amp, rupturing capacity 10 KA, ‘C’ series complete all as specified and directed.

M & L for submain wiring alongwith earth wire with the sizes of 2x4 sq mm and 1x4 sq mm as earth wire FRLS PVC insulated copper conductor single core cable , multistranded Concealed including suitable size of PVC conduit with its all accessories complete all as specified and directed.

S & F LED street light 30 W building security light pressure die cast aluminium housing LED street light lumaniries with IP 66 and complete accessories complete all as specified and directed.

S & Fix Metal plug and socket DB's with MCB 20A SP for AC complete all as specified and directed.

Supply, laying and testing cable LT XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size :- (a) 70 sq mm 3.5 core

(b) 50 sq mm 3.5 core

(c) 16.0 sq mm 2 core

Supply Laying double wall corrugated pipe (DWC) of HDPE ISI Mark for enclosing cable below ground / road surface, to a required depth, including suitable size couplers for jointing of pipe complete all as specified and directed :- (a) 40 mm bore

(b) 25 mm bore

Supply & fixing GI tubing (ISI Marked), light grade for cable protection with all necessary fittings as required, laid in trenches, under road/floors or on electric poles complete all as specified and directed of size :- (a) 40 mm bore

(b) 25 mm bore

Supply Fabricate, install, connect, test and commission Outdoor type dust & Vermin proof LT electrical panel board, 1100 volts, 50 Hz AC supply, fully compartmentalised (CPRI approved) for cable chamber and busbar chambers with adequate space made out of 3 mm thick CRCA sheet for load bearing like all over body, front and back cover with hinges and aldrops with DC locks CRCA poweder coated and 2.0 mm thick MS Sheet for non load bearing and portions, complete with one coat of powder coating including suitable angle iron/ flat iron frame work/ supports bottom 50x50x6 mm MS channel as base and chamber for metering equipment complete suitable for mounting following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated and connection wirings with FRLS copper conductor complete mounted on PCC pillars foundation, arrangements for bus bar trunking system, cable connection using new lugs complete with danger notice all as specified and comprising of the followings:-Note: (i) Existing cables which removed from old panel board will be fixed with new lugs during fixing in new panel board (as if required) (ii) Getting of approval for Panel board drawing from Engr-in-Charge is necessary before fabrication. (iii) All swith gears should be fixed with 06 mm thick Fibre sheet :- In comming :- (a) LED/Neon indicator bulb in RYB Colour - 1 Set. (b) 4 No aluminium Bus bar 600 amps with chamber (c) Digital Multi function meter for showing Amps (upto 300 Amps) and Voltage (upto 500 voltage) with suitable CT and PT (d) MCCB 4 Pole, 415 V, 160 Amps 36 KA - 01 Nos Out going:- (e) MCCB 4 Pole, 415 V, , 100 Amps 36 KA - 02 Nos (f) MCCB 4 Pole, 415 V, , 63 Amps 25 KA - 04 Nos (f) suitable cable gland for cable

Supply Fabricate, install, connect, test and commission Outdoor type dust & Vermin proof LT electrical panel board, 1100 volts, 50 Hz AC supply, fully compartmentalised (CPRI approved) for cable chamber and busbar 200 Amps 4 Nos, chambers with adequate space made out of 3 mm thick CRCA sheet for load bearing like all over body, front and back cover with hinges and aldrops with DC locks CRCA poweder coated and 2.0 mm thick MS Sheet for non load bearing and portions, complete with one coat of powder coating including suitable angle iron/ flat iron frame work/ supports bottom 50x50x6 mm MS channel as base and chamber for metering equipment complete suitable for mounting following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated and connection wirings with FRLS copper conductor complete mounted on PCC pillars foundation, arrangements for bus bar trunking system, cable connection using new lugs complete with danger notice all as specified (ii) Getting of approval for Panel board drawing from Engr-in-Charge is necessary before fabrication. (iii) All swith gears should be fixed with 06 mm thick Fibre sheet (f) suitable cable gland for cable complete all as specified and directed.

Material and Labour for Earthing complete with with 600 mm x 60 mm x 6.15 mm thick, galvanized steel earth plate electrode buried vertically in ground (not less than 2.25 meters deep below normal ground level),with top edge of earth plate not less than 1.5 meter below ground level connected to and including G.I strip of size 25mm x 4 mm by means of bolts/nuts/check nuts and washers of galvanized steel, GI Strip encased in and including 40 mm bore GI light grade protection pipe starting from top edge of the earth plate laid in ground/floors fixed on wall. GI strip to be connected with LT Panel with provision of charcoal dust & common salt all around the earth plate 15 cm layers including necessary excavation and earth work in any type of soil/strata, provision of concrete earth pit using PCC 1:3:6 type C-2 including RCC cover using PCC 1:2:4 type B1 20 mm dia GI light grade with wire mesh and tunel for watering arrangement, complete all as shown on electrical plate No. 3 of SSR Part I includig testing after completion of earth complete all as specified. Note : GI strip & pipe up to 7.5m length is included in quoted rate.

Supply laying & testing tubes, Galvanised,"medium " grade, with all fittings and fixed to walls, ceiling or laying in floors, all as specified for following size:- (a) 25 mm bore pipe

(b) 20 mm bore pipe

(c ) 15 mm bore pipe

Supply and fixing of Gun metal gate valves ISI marked with iron wheel head, screwed both ends for iron pipes complete, size of GM gate valve 25mm complete all as specified and directed.

All as per item here in above but size of GM gate valve 15mm complete all as specified and directed.

Sky Vision Construction (BID ID -3200670)

M/S OMSAI ENTERPRISES (BID ID -3194731)

Mehta and Co. (BID ID -3195147)

M/S Divyani Aadhar Patil (BID ID -3201186)

sagar construction (BID ID -3195224)

J.G.Goel (BID ID -3195200)

Samyak Engineers (BID ID -3195292)