SPECIAL REPAIR TO SEWAGE LINE, SEPTIC TANK, SOAKAGE WELL AT JAIPUR MIL STATION UNDER GE (S) JAIPUR

Amount

Excavation in trenches, not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc not exceeding 10 sq m on plan and not exceeding 1.5 metre in depth and getting out in soft/loose soil.

Excavation in trenches, not exceeding 1.5 metre wide, exceeding 1.5 metre and not exceeding 3 metre in depth for wall foundation etc or for manholes etc not exceeding 10 Sqm area on plan and not exceeding 1.5 metre in depth and getting out in soft/loose soil.

Excavation in trenches, not exceeding 1.5 metre wide, exceeding 3 metre and not exceeding 4.5 metre in depth for wall foundation etc or for manholes etc not exceeding 10 Sqm area on plan and not exceeding 1.5 metre in depth and getting out in soft/loose soil.

Removing of excavated material (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.50metre above the starting point complete all as specified and directed

Removing excavated material exceeding 50 metres but not exceeding 100 metres and depositing where directed at a level n exc. 1.5 m above the starting point. etc complete as per specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm etc. complete as per specified and directed.

M&L for Cement concrete (1:4:8) type D2, using 40 mm graded aggregate in foundations, filling and mass concrete etc complete as per specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete as per specified and directed.

M&L for Brick work sub class B bricks straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:4) etc complete all as specified and directed.

M&L for Brick work sub class B bricks straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:4) etc complete all as specified and directed but except brick

Taking down cement plaster or cement lime plaster on PCC/stone surface/ brick surfaces/ceiling etc. including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls including mixed with WPC @ 3% by weight of cement finished even & smooth etc complete all as specified & directed.

M&L for rendering 15mm thick on stone masonry surfaces or surface other than fair faces of brick work on wall CM (1:4) on walls finished even and fair complete all as specified and directed.

Demolition Cement concrete (reinforced) concrete in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm th (Horizontal or sloping) Rough finished surface of concrete flat. etc complete all as specified & directed.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 10 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide complete all as specified & directed.

M&L for RCC (1:2:4) type B0, using 12.5 mm graded stone aggregate as in slab support on walls, landing, balconies, deck slabs and in shelves and the like complete all as specified & directed.

M&L Precast cement concrete(1:2:4) type B1, using 20 mm graded aggregate in landings cover slabs (for manholes etc.) chullah, hoods, chajjas, water troughs mangers, shelves and similar articles with plain faces with set in cement mortar 1:6. etc complete all as per specified and directed.

M&L for deformed or twisted Mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as per specified and directed.

Demolition of stone setting paving of any description of any thickness laid, bedded and pointed in any mortar complete all as per specified and directed.

M&L for 50 mm thick sand stone slabs in manhole cover, chajjas, shelves, cills, landings, cover stones, templates, etc, not exceeding 2m in length, punched dressed on face and along exposed edges, self-faced on other side and set and pointed in CM (1:4) complete all as per specified and directed.

Demolition Cement concrete (unreinforced ) concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) etc complete all as specified and directed.

M&L plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregates as in surface channels and drain and benching including finishing the top of benching even and smooth without using extra cement etc complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc complete all as per specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete ) set in cement mortar Internal dia of pipe 100 mm. etc complete all as specified & directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete ) set in cement mortar Internal dia of pipe 150 mm. etc complete all as specified & directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete ) set in cement mortar Internal dia of pipe 200 mm. etc complete all as specified & directed.

Supply and laying DWC pipes ( Double wall corrugated) of class SN-4, IS-16098 (Part-II) of size internal dia of 100 mm, laid in trenches and jointed complete with coupler, bends, tee, reducers etc complete all as specified & directed. Make: Ultra plus DWC PE pipe of Supreme/Corfit of Prince/D-Rex DWC of Astral.

Supply and laying DWC pipes ( Double wall corrugated) of class SN-4, IS-16098 (Part-II) of size internal dia of 150 mm, laid in trenches and jointed complete with coupler, bends, tee, reducers etc complete all as specified & directed. Make: Ultra plus DWC PE pipe of Supreme/Corfit of Prince/D-Rex DWC of Astral.

Supply and laying DWC pipes ( Double wall corrugated) of class SN-4, IS-16098 (Part-II) of size internal dia of 200 mm, laid in trenches and jointed complete with coupler, bends, tee, reducers etc complete all as specified & directed. Make: Ultra plus DWC PE pipe of Supreme/Corfit of Prince/D-Rex DWC of Astral.

S&F salt glazed stone ware gully traps square or rounded mouthed type ‘P’ or ‘S’ of size 150 x 150mm including excavation earth work and raising upto plinth protection with PCC 1:2:4 type B-1 and covered stone slab etc complete all as specified & directed.

M&L cutting into existing manholes for connecting new drains of 100 mm internal dia of pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4, type B-1 smooth finished, and reforming benching etc complete all as specified & directed.

M&L cutting into existing manholes for connecting new drains of 150 mm internal dai of pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4, type B-1 smooth finished, and reforming benching etc complete all as specified & directed.

M&L cutting into existing manholes for connecting new drains of 200 mm internal dai of pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4, type B-1 smooth finished, and reforming benching etc complete all as specified & directed.

M&L for 75 mm thick PCC (1:2:4) type B-1 using 40mm graded stone aggregate as in sub base complete all as specified & directed.

M&L chequered cement concrete tiles 20cm x 20cm x 20mm thick , set , jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 15mm thick screed bed in CM 1:6 complete all as specified & directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand etc complete all as specified and directed.

M&L for construction of soakage well of 3.0 meters dia and 4.0 meters deep including excavation, PCC, stone masonry, RCC complete all as specified as shown in Sketch ‘A’ attached to tender document Note: Contractor advises to see the sketch before the quoting the rate and unit rate are quoted accordingly and no misunderstanding shall be entertained.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

Schedule of Credit

Smita Constructions

UNIVERSAL INFRAPROJECT PVT LTD

M/S Mohan Lal Gupta