REPAIR TO FOOT PATH INTERLOCKING TILES CHEQUERED TILES KERB STONE BERMS AND ROAD PAINTINGETC UNDER AGE BR I OF GE EAST AGRA

Amount

Demolition of cement concrete (unreinforced) in any position and any description including removing the same at location directed by Engr-in-charge complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L for glossy finished chequered cement concrete tiles 400 x 400 x 25 mm thick set jointed and pointed in neat coment slurry in floors with grey/colour cement and no pigment including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg) 25 mm thick for Sub base flooring complete all as specified & directed.

Material and labour for 40 mm thick cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in floor , surface finished even & smooth with using extra cement complete all as specified and directed.

Supply only 38mm wide and 3mm thick glass dividing strip as in laid in floor complete all as specified and directed

Material and labour for 50 mm thick cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in path / plinth protection , surface finished even & smooth without using extra cement including forming construction (dummy) joints 12 mm wide & filled with mixture of hot bitumen & sand in the ratio of 1:3 laid in interval of not exc 3 m including change of direction etc complete all as specified and directed.

M&L for preparation of road surface and applying thermoplastic reflective paint for marking of minimum 2.5 mm thick single coat as a centre line or edge line etc, road marking of 150/100 mm width using "HOT MARK" thermo plastic paint (Hot application) white / yello by indigenous modern propelled road marking machine as directed including all ingredients such as binder, glass beads, titanium dioxide, calcuim carbonate, inter filler etc, thermoplastic requirement for glass beads shall be confiming to BS-6086 of MOST/OSCAR specification including spraying of glass beads etc complete all as per manufacturer's instructions and as directed by Engineer in charge.

M&L for PCC 1:2:4 type B1 using 20mm graded aggregate as in precast kerb stones of sizes as directed, including embedding in the ground to depth as indicated and tamping ground around kerb stones and also for removing surplus spoil to a distance not exc 100 Mtr etc.complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 (using 40 mm graded granite stone aggregate) as in sub base to receive interlocking tile complete all as specified and directed.

M&L for 60 mm thick precast rubber moulded, machine pressed, glossy finished , interlocking tile, with grey cement and no pigment, M-35 designation (compressive strength) any shape and size conforming to IS 15658-2006 laid over compacted dry sand cushion (Yamuna sand) incl sides of paver blocks grouted with and including PCC 1:2:4 type B-0 using 12.50mm graded crushed stone aggregate to make straight line complete all as specified and directed. Note- Sand cushioning shall be measured and paid separately) Make : M/S Star Tiles, M/S Mayur Tiles, M/S Mehtab tiles .

All as per item No 11.00 but except interlocking tile complete all as specified and directed. Note- Sand cushioning shall be measured and paid separately)

M&L for 80 mm thick precast rubber moulded, machine pressed, glossy finished , interlocking tile, with grey cement and no pigment, M-35 designation (compressive strength) any shape and size conforming to IS 15658-2006 laid over compacted dry sand cushion (Yamuna sand) incl sides of paver blocks grouted with and including PCC 1:2:4 type B-0 using 12.50mm graded crushed stone aggregate to make straight line complete all as specified and directed. Note- Sand cushioning shall be measured and paid separately) Make : M/S Star Tiles, M/S Mayur Tiles, M/S Mehtab tiles .

M&L for sand cusioning for laying under floor complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint (Ordinary tint) over a coat of primer including preparation of new or previously untreated concrete surfaces of any description, not otherwise described exc. 10 cm width or girth complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint (Ordinary tint) including preparation of old concrete surfaces of any description, not otherwise described exc. 10 cm width or girth complete all as specified and directed.

Balaji Associates

Mahendra Enterprises

N.K. ENTERPRISES

M/s D AND R CONSTRUCTION AND SUPPIERS

SHRI SAINATH ENGINEERS

Messars Maa Devi Construction Co.