SPL REPAIR TO BLDG NO P 20 JCOS MESS AND AFNET EQUIPMENT UNDER GE I GOS

Amount

Taking down the Chowkhats or frames not exc. 1.5 sqm each (without taking off shutters from the frames) complete all as specified and as directed

Taking down the Chowkhats or frames exc 1.5 sqm but n exc 4 sqm each (without taking off shutters from the frames) complete all as specified and as directed

S&F for Factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing in SSR Part II 2010 complete all as specified and as directed

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2010 complete all as specified and as directed

S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel fixed to Chowkats complete all as specified and directed

S&F Aluminium Handle 150 mm long cast type, anodised extruded fabricated type complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and directed.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each complete all as specified and as directed.

S&F for 5.5 mm thick sheet glass ordinary quality and glazed with oil putty or fixed with beads in square exc 0.5 Sqm in each pane omplete all as specified and as directed.

M&L for Preparation of new or untreated surfaces of wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over pink primer complete all as specified and as directed.

M&L for painting steel and iron surfaces of steel surfaces of any description, over 10cm in width or girth, not otherwise described, applying two coats of synthetic enamel paint over coat of red oxide primer including preparation of new surface complete all as specified and directed

S&F for mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work and fixed with wooden beading complete all as specified and as directed

S&F 40mm dia cub board knob brass polished fixed with nut screw and washer of brass polished complete all as specified and as directed.

S&F for ball catches with 8mm dia steel ball and brass body and striking plate incl letting in and fixed complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry, built in Cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed

M&L Brick work with modular fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed

M&L for taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of external wall of brick work or stone surfaces in cement Mortar in 1:4 and finished the surface even and smooth (without using extra cement) complete all as specified and directed.

M&L for rendering 10 mm thick internal wall on fair faces of brick work or concrete surfaces in cement Mortar in 1:6 and finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for rendering 5 mm thick on ceiling in cement mortar 1:3 finished even & smooth without using extra cement complete all as specified and directed

Supply only Liquid water proofing compound for external wall plastering (for 5 mm thick plastering) complete all as specified and directed

M&L for preparation of newly plastered surfaces of walls and applying two coats of distemper-oil-emulsion over a coat of primer including 3 mm thick wall care putty complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of distemper-oil-emulsion over a coat of primer including 3 mm thick wall care putty complete all as specified and as directed.

M&L for preparaion of newly plastered surfaces of walls and finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed.

M&L for complete removal of existing treatment and applying two coats of walls with distemper oil emulsion white or tinted over alkali resistant primer including 3 mm thick wall care putty complete all as specified and as directed.

M&L for complete removal of existing treatment on ceiling and applying two coats distemper oil emulsion white or tinted over alkali resistant primer including 3 mm thick wall care putty complete all as specified and as directed.

M&L for complete removal of existing treatment on wall including removal of vegetation and apply finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed.

M&L for light shade vitrified Ceramic tiles 10 mm thick (Square/rectangular) polished, area of each tiles exc 0.36 sqm but n exc 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed in CM 1:6 complete all as specified and directed.

M&L for light shade vitrified Ceramic tiles 10 mm thick (Square.rectangular) polished, area of each tiles exc 0.36 sqm but n exc 0.42 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backcoat in CM 1:4 complete all as specified and directed.

M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of cement mortar in 1:6 for laying floor finishes complete all as specified and as directed

M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick back coat of cement mortar in 1:4 complete all as specified and as directed

M&L for Coloured Glazed ceramic tiles in vertical surface of size 450X 350X 7 mm thick over 10 mm thick back coat of cement mortar in 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match over complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed

Dismantling of water tank Capacity exc 500 not exc 1000 Ltrs and removing to store complete all as specified and as directed

Hoisting and Fixing of rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 1000 ltrs hoisted and fixed in position specified in SSR Part I complete all as specified and as directed.

M&L for 40 mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) in sub base finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed

S&F for 20 mm bore, Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed

S&F for Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device

S&F in repairs vitreous china wash hand basin white flat back size 550x400mm excluding taps, waste chain and plug and porcelain stopper including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed.

S&F for pillar taps of size 15mm, chromium plated fancy type cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.

S&F in repairs PVC low level flushing cistern 10 litre capacity, valveless, symphonic action type with inlet, ball valve, float and handle incl bracket, PVC conection pipe and flush pipe of polyethylene of low or high density or PVC. 32 mm dia complete all as specified and directed

S&F for PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed

S&F in repairs Tubular towel rail, 20mm dia, D type, 60cm long Brass Chromium plated between flanges complete all as specified and as directed

S&F for Brass chromium plated shower rose 125 mm size fixing to steel pipe or union complete all as specified and as directed

M&L PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement including disconnection of old existing trap, and connected with existing water pipe complete all as specified and directed.

S&F for Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), including providing and fixing plugs, bedding urinal against wall in cement mortar :2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)

S&F for bib taps fancy type CP with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferule and fixed of size 15mm bore in repair complete all as specified and as directed.

S&F for 15 mm bore dia cast copper alloy fancy type, chromium plated stop valves, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed

S&F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed

S&F for 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed

S&F for 75 mm bore PVC (SWR) bends any radius complete all as specified and as directed

S&F for 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed

S&F for 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed

Taking up or down 25 to 32 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed

Supply and laying of 25mm of CPVC pipes SDR 11& Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. tranches complete all as specified and directed.

Supply and laying of 20mm of CPVC pipes SDR 11& Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. tranches complete all as specified and directed.

S&F for 25mm dia CPVC Brass thread elbow complete all as specified and as directed.

S&F for 20mm dia CPVC Brass thread elbow complete all as specified and as directed.

S&F for 25mm dia CPVC Brass thread Tee complete all as specified and as directed.

S&F for 20mm dia CPVC Brass thread Tee complete all as specified and as directed.

S&F for 25mm CPVC tank adopter complete all as specified and as directed.

S&F for 25mm CPVC ball valve complete all as specified and as directed.

M&L for cutting chases, pinning in brickwalls, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20 cm girth complete all as specified and as directed.

Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed

M&L for 75 mm thick Cement concrete type C-2, 1:3:6 (40mm graded aggregate) in plinth protection, finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed

M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade A complete all as specified and as directed

M&L for 100 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) in subbase of floor etc complete all as specified and as directed.

M&L for chequered cement concrete tiles 25cmX25cmX25mm thick, set, joined and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified and directed.

M&L for 25 mm thick Cement concrete type B-0 1:2:4 (12.5 mm graded aggregate) complete all as specified and as directed

M&L for Providing precast cement concrete manhole covers, Type B1 1:2:4 (20 mm graded aggregate) set in cement mortar 1:4 complete all as specified and as directed

S&F for PVC waste pipe of 32 mm size flexible and 1.2 mtr long, fitted to basin or sink complete all as specified and as directed.

S&F Parryware 15mm dia Angle stop cock with wall flange all as specified and directed. (Cat Part No G1807A1) complete all as specified and as directed.

S&F in repairs designer curtain rail with fixing Brackets complete all as specified and as directed.

S&F in repair health faucet cast copper alloy with push button & 1m long flexible steel pipe with PVC lining suitable for 15mm bore pipe complete all as specified and directed.

M&L Water proofing treatment on RCC roof etc. comprising with the following operation & as specified herein below:- (a) Taking down existing old tarfelt, bituminous compound, cement mortar including cleaning & removing debris to a distance exc 100 m n.exc.250m. (b) M&L for 15 mm thick cement mortar with WPC in 1:4 over PCC when concrete is green. (c) Preparing & cleaning of fully dried cement plastered surface. (d) Applying one coat of cold bituminous primer to the plastered surface @ 0.25 litres per sqm conforming IS-3384. (e) A layer of APP based polymeric membrane membrane 3mm thick (minimum) weighing 3.5 kg per sqm reinforced with polyster non woven fabric (weighing not less than 160 gms/sqm) shall be applied over bituminous primer as specified above. Application of polymeric membrane shall be by torch application. The over lap shall be minimum 100 mm on transverse direction and 100 mm in longitudinal direction. (f) One coat of aluminium paint over APP membrane @0.11Kg/Sqm. Note:- Prior to execution of the APP Membrane works, leak proof test shall be done by ponding water on roof slab to minimum depth of 25 mm. The entire roof slab shall be flooded with water for 48 hours. The necessary barrier shall be made to make feasible to stagnate water for 48 hours on roof slab.

Taking down carefully copper/aluminum point wiring (light, fan/exhaust fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders, brackets, bulk head fittings etc removing material to store for keeping in safe custody or for taking credit ( credit for above items should be made as per conditions separately ) and also making good disturbed surfaces of wall, floors etc all as specified and as directed by the Engineer-in-Charge.

M&L for One light point controlled by one, one way switch and point wiring with 1.5 Sqmm copper conductor (Multi-stranded) PVC insulated and unsheating FRLS electric cable 1100 volts cable and including concealed in PVC conduit 20 mm dia ISI marked or suitable size (as per conductor run) with all fittings/ accessories and including PVC insulated electric cable 1100 volts 1.5 Sqmm ( multi-stranded) copper conductor single core( Green colour) cable as continuous earth wire connected to common earth dolly by providing lugs including sunk in pressed steel terminal boxes of 1.6 mm thick concealed in wall (duly painted with two coats of black bituminous paint over a coat of red oxide primer in and out sides) with and including cutting holes for switches, sockets, regulators etc as per requirement including fixing with machine screw, washer etc for one light point/bell point etc controlled by one, one way switch complete and making good the disturbed surfaces with cement work/putty as per existing including colour/white wash/distemper to match with existing same all as specified and as directed by the Engineer-in-Charge. Make of wire : Finolex/Polycab /Havells

All as per item ser No 84 above but for one fan/exhaust fan point controlled by one, one way switch

All as per item ser No 84 above but for one 5 Amp socket point controlled by one way switch on same board.

All as per serial item No 84 above , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge.

S&F modular socket outlet 6A 2/3 pin combined 2 module complete all as specified and directed. Make : Havells/L&T/Crab tree

S&F modular switch 16A single pole one way complete all as specified and directed.

S&F modular socket outlet 6A/16A- 2/3 pin combined 2 module complete all as specified and directed.

S&F modular switch single pole 1 way 6A, complete all as specified and directed.

M&L for modular Bell push Switch single pole one way 6A/10Amps complete all as specified and directed.

M&L for call bell AC 230 volt single pole complete all as specified and directed.

M&L for modular fan regulator, 120, W-2 module complete all as specified and directed.

Supply and fix Ceiling rose 3 termianl complete all as specified and directed

S&F modular white cover plate with frame for module 3 incl modular metal flush box complete all as specified and as directed

All as per Item no 96 above but for 6 module complete all as specifed and as directed

All as per Item no 96 above but for 8module complete all as specifed and as directed

Supply and fixing for sub main wiring two single core PVC insulated and unsheathed cable with 6 Sqmm multi -strand copper conductor drawing in PVC casing caping with 6 Sqmm PVC copper conductor cable as in earth wire system ,including taking out old wiring complete all as directed. Note : two run 6sqmm and one run of earth wire 6sqmm and PVC conduit will be measured as one length.

Supply and fix Sheet metal enclosure for AD/DD DB’s suitable for MCBs of single pole and neutral 8 way (Double door) with 200 amp rated bus bar all as specified and directed. Make: L&T/Legrand

S&F Isolator RCBO (Residual current breaker with over current protection) 40A, 240 volts all as specified and directed by Engr-in-Charge.

S&F MCB SP up to 40 Amp, 240 volt all as directed.

Material and labour for PVC rectangular block of size 25 cmx20cmx5cm depth, closed recessed 3mm thick plastic laminated sheet complete all as specified

Energy efficient LED integrated batten suitable for indoor applications tube light fitting 1x20 Watt 4 FT complete, all as specified and directed.

S&F LED Bulk Head fitting 9 Watt complete all as specified and directed by the Engineer-in-charge.

Supply and fix LED Lamp pin type 9 watt all as specified and directed by the Engineer-In-charge.

material and labour for Lamp holder, PVC/Polycarbonatetype with back plate suitable for batten fittings including connections complete all as specified and directed.

S & F LED light fitting 1 x 10 Watt T5 Alumnium batten type, indoor decorative PC housing extruded T5 Al LED battens with extruded aluminium housing and integrated LED driver complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size incl taking down the old USNV complete all as specified and directed

Supply and fixing Ceiling Fan 1200 mm, sweep star rated with blade, down rod complete all as specified and directed.

Supply and fixing exhaust fan 300 mm sweep, 1400 RPM with louver complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.3mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 Metres below normal ground level, connecting to the Galvanised iron earth lead wire 4mm dia, by means of bolts, nuts, check nuts and washers of galvanised iron and 4mm earth lead protected by provision of GI medium grade pipe 15mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt and charcoal filling, test point made out of 75x50x6mm phosphorous bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 3 of SSR-2009 Part-I and connecting to earth test point including testing on completion all as specified and directed by the Engineer-in-charge.

Supply and fixing for 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN1.6) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings of size 25 mm fixed complete to walls, ceilings or in floors etc.

Supply and fix PP-R Gate valves of size 25 MM outer dia (brass insert) as per requirement of the site complete all as specified and directed

Taking down and re-fixing, connecting existing electric meters, single phase all as specified and directed by Engr-in-Charge

S&F Electric water heater storage type(Geysers) of capacity 25 ltrs complete with fitting and fixtures five star rating metal body.

Supply and fixing along wall GI pipe 15 MM medium grade with all fittings such as socketts, nipplle, unions, elbows, reducers, tee pieces etc fixed along the wall with hooks etc what ever is required at site or all as specified and directed by Eng- in- Charge

Supply and fix angle Valve, stop, screwed,15 mm (1/2”) dia pipe but fancy type,chromium plated

M & L for cutting of exesting pipe size 20 mm bore for insertion of Tee, union socket and nipples for taking branch connection of 15 mm bore including threading all as required at site.

S& F Bib taps,cast copper alloy with crutch or butterfly handle,screwed down,screwed for iron pipe or for brass ferrural and fixed fancy type.

S& F CP connection for Geysers complete all as specified and as directed.

Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket of capacity complete with one single pole MCB of capacity 240 volts 20 amp complete all as specified and directed by Engr-in-charge.

Material and labour for point wiring with 2.5 Sqmm copper conductor (Multi-stranded) PVC insulated and unsheating FRLS electric cable 1100 volts cable and including PVC casing and caping of suitable size (as per conductor run) with all fittings/ accessories and including PVC insulated electric cable 1100 volts 2.5 Sqmm ( multi-stranded) copper conductor single core( Green colour) cable as continuous earth wire connected to common earth dolly by providing lugs including sunk in pressed steel terminal boxes of 1.6 mm thick concealed in wall (duly painted with two coats of black bituminous paint over a coat of red oxide primer in and out sides) with and including cutting holes for switches, sockets, regulators etc as per requirement including fixing with machine screw, washer etc and making good disturbed surfaces of wall and matching colour as per existing for one light point controlled by one, one way switch all as specified and as directed by the Engineer-in-Charge.

Material and labour for socket outlet 2 in 1, 3 pin, 5 Amp and 15 Amp flush type complete.

Supply and fixing for sub main wiring two single core PVC insulated and unsheathed cable with 4 Sqmm multi -strand copper conductor drawing in PVC casing caping with 4 Sqmm PVC copper conductor cable as in earth wire system ,including taking out old wiring complete all as directed.

Mild steel framed work such as grills,gratings,etc.with ends of bars shouldered and/or riveted or forged into spikes,framed guard bar,barred iron doors,ladder,framed balusters,ralling frame work etc and similar work conforming to Fe-410-O or Fe-310-O complete all as specified and as directed by Engr-in-charge.

S & Fix PVC conduit 40mm complete alongwith necessary fixing arrangement complete all as specified and directed.

M&L Chemical earthing with copper earth plate electrode of size 90cmX60cmX5.0mm thick burried directly in ground with top edge of the earth plate not less than 2.25mtr below ground level and connected to copper earth strip of 32X6mm as earth lead upto 7.5 mtr length fixed by means of nuts/bolts of brass and all joints to be brazed/riveted properly and connected to earth test point incl providing GI medium gradeof size 40mm for watering pipe/protection pipe for earth lead and incl 50mm thick layer of magnesium sulphate above the top of the layer of chacoal and salt altrnatiyely all around the plate as directed by Engr in charge all as shown in electrical plate No. 5 all as specified or indicated including testing on completion and making good the disturbed surfaces of wall floors etc with claiming no extra cost all as directed .

Supply and fix Earthing copper strip 32 x 6 mm with porcelain /PVC insulator, saddled not exeeding 400mm spacing for roof conductor/down conductor with fixing screws or buried in ground or drawn in conduit /pipe/duct or fixed to poles or any other indicated situation for loop earthing etc. conductor conneting and jointing completly with Brazing/Welding the overlap portion of any size copper Strip together copper plate/ rod/GI strip etc. as per site requirment all as per specified and directed by Engr-in-Charge..

Material & labour for Earthing using Copper earth plate electrode of size 60cm X 60cm X3.15mm thick burried directly in ground vertically at a depth not less than 2.25 mtr below normal ground level with top edge of earth plate at a depth not less than 1.5 mtr below normal ground level, earth plate surrounded from all sides by 15 cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Copper strip of size 20x3mm by means of bolts, nuts, check nuts and washers made of copper/brass and provision of GI pipe medium grade 25 mm dia for protection of earthing lead and 20mm dia for watering arrangement including funnel, wire mesh, CI pit cover and PCC chamber pit with PCC 1:2:4 type B-2 (including necessary excavation and earth work disposal of surplus soil to a distance not exceeding 50 mtr all as specified and shown on plate No 5 of SSR Part-I 2009.

Supply and fixing copper strip 20 x 3mm fixed with porcelain saddles not exceeding 400mm spacing and fixing screws for roof condductors and down conductors above ground or fixed on wall, roof all as specified and as directed by Engineer-in-Charge.

Material and labour for test point terminal block made of gun metal or phosphorus bronze of size 75 x 75 x 25mm with drilled holes and screws including 3 x 2 Nos, 8mm dia, 25mm long hexagonal head screw of brass with nuts complete duly fitted, grouted on 02 Nos., MS flat 25 x 5mm, fabricated with suitable shape and size and fixing or 02 Nos porcelain saddles for mounting of terminal block complete all as specified and as indicated.

Supply and fixing Air terminal single pointed aluminum rod 12mm dia and 300mm long, mounted on 40mm bore light grade GI pipe, embedded in mass concrete all as specified and as directed. Note: PCC concrete and 40mm GI pipe shall be measured and paid under relevant item.

Supply and replacent GI pipe light grade with all fittings laid in trenches/walls of size 20 mm dia all as specified and directed by Engr-in-Charge

S&F Sheet metal enclosure for Acrylic door DB’s suitable for MCBs of triple pole and neutral 4 way double door type with 200 amp rated bus bar complete all as specified and directed.

S & F Isolater TPN 63 Amp 415 Volts complete all as specified and directed.

S & F Isolater TPN 40 Amp 415 Volts complete all as specified and directed.

Supply and laying and testing cable PVC insulated, armoured,heavy duty electric cable with aluminium conductor, 1100volts grade, cross-sectional area 25 sq. mm 4 core

Supply and laying and testing cable PVC insulated, armoured,heavy duty electric cable with aluminium conductor, 1100volts grade, cross-sectional area 35 sq. mm 4 core

Supply and fix 4 Pole MCCB 125 Amp, 50 Hz, 415 V with sheet metal enclosure of rupturing capacity 35 KA

Supply and fix ON LOAD change over switch 415V with sheet metal enclosures 4 pole of capacity 125 Amps.

Supply and fix Type 2 AC surge protction device (SPD) SPN all as specified.

Supply and fix Type 2 AC surge protction device (SPD) TPN with enclosure complete all as specified.

S&F Plastic enclosure without bus bar 2 way as required at site with fixing on wall/pole etc with binding/fixing material complete all as specified and directed.

Supply and fix in replacement of electronic adjustable cyclic timer Make : EAPL /L&T/Minilec.

Supply and replacement contactor 16 Amps capacity 2 NO + 2 NC, AC 3 phase 415 Volts, 50 HZ with enclosure.

Supply and fix Voltage stabilizer for automatic operation, three phase, naturally oil cooled, indoor type & designed for input variation between 300 V to 480 V with output voltage stabilized at 415 with accuracy ± 2.5% and speed of correction 8 Volts per second and of capacity 20 KVA

Supply and installation of isolation transformer single phase 240 Volts, of rating 1.0 KVA capacity, for complete line isolation, electrical noise filtering, common mode surge suppression to eliminate harmonic tripling, with Electrostatic shielding conforming to IS : 2026 including making necessary electrical connection.

Supply and installation of isolation transformer three phase 415Volts, of rating 20 KVA capacity, for complete line isolation, electrical noise filtering, common mode surge suppression to eliminate harmonic tripling, with Electrostatic shielding conforming to IS : 2026 including making necessary electrical connection.

Supply and install hi wall split unit indoor /outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better in door air quailty with minium 5 star and EER 3.2 of capacity 1.5 ton including connecting and testing complete allas specified and as directed by Engr-in-charge.

Supply,Install,testing and commissioning of Intelligent analouge Addressable single loop quick start Fire Alarm Control panel complying with BS EN 54 of capacity from 99 detectors & 99 modules up to 200 detectors and modules.

Supply,Installing,teasting and commissioning factory made and tested CPRI approved LT panel board out door type weather vermin proof mounted on platform with angle iron leg of size 50x50x6mm thick suitable for 440 volts,3phase 4 wire 50HZ AC supply system conforming to IS -5039, made of 3mm thick CRCA sheet with Bottom ''C'' Channel 75 mm with cable chamber size of panel 800x800x450 mm and aluminium bus bar 1.5 times of rated current of Incoming MCCB with heat shrink insulation and mounting insulators,angle iron frame work of size 50x50x6 mm thick,ventilation arrangement,powder coated paint of approved colour over a coat of red oxideprimer complete all as specified and directed including the following:- MCCB 4 ploe 40 Amps,25 KA 415 Volts-01No (Incoming),MCCB 4 pole 32Amps,25KA,415Volts-01(Out going),Star delta starter control with pressure switch NO/NC Contactors -01 Nos,Indicator lamp R,Y,B LED type-01 Set,MCB SP 6-32 Amps-03Nos for control wiring protection,Digital type Ammeter with suitable rating CTs-01 Nos and voltmeter digital type-01 Nos.

Supply,Install,testing and commissioning of Addressable type multisensor detector with heat and smoke combination certified to EN 45 photoelectricoptical with base with self built inteligence as per IS11360.

Supply,install, teating and commissioning of Intiligent Analouge Addressable manual call pointresettable type.

Supply and itall fire alarm sounders/sirens electronic typehorizontal single stage continous normal opration for atleast 50 minutes with sound level 65 db to 120db measured at 1.5 mtr with sound output variation of +5 db for 500mtr range

Supply,laying and connecting up with fire alarm control panel to all type detcetors, manual call points wiyh 2X0.75 sqmm multi standard copper cable.

S&F rigid non metalic PVC conduit 20 mm dia including all tees,elbows,reducers and fixing accessories such as couplers pipe hooks etc complete for alarm system

Supply & fix busbar box, installation, testing and commissioning of factory fabricated prewired bus bar, cubical type IP 65 of suitable size out door, double door, dust and vermin proof, CPRI approved made out of 50x50x6mm angle iron frame/legs and 3.15 mm thick CRCA sheet with openable shutters on both sides (front & rear), powder coated externally and internally, having locking arangement mounted on four legs 90 cm high (30 cm below ground level and 60 cm above ground level),Panel embedded in PCC (1:2:4 ) type B2 of suitable size with clear working space all around the bus bar complete all as specified & directed by the Engr-in-Charge to accommodate the following accessories :- (a) MCCB 4 Pole 125 Amp 25 KA - 1 Nos (Make : C&S/Schneider/Indoasian) (b) Copper bus bar 200 A for three phase and neutral duly insulated with sleeves of colour RYB with necessary holes for looping the circuit for outgoing circuit. (Note : (i) Incoming and outgoing cable shall be fixed with appropriate size of copper thimble. (ii) Apron shall be provided at bottom for protection of cable to avoid entry of vermins, reptiles. (iii) Entries of all sizes of cables in panel should be done through adequate size of metallic cable glands. (iv) Indicator Lamp-03 Nos

M/s Ats Electricals (BID ID -3162626)

HARAGOURI SUPPLIERS (BID ID -3162664)

M/s MAA BHAIRABI ENTERPRISES (BID ID -3162681)