CIVIL WORKS FOR RENOVATION OF TOILETS IN LIBRARY AND MISC CIVIL WORKS IN PRATIBHA AUDITORIUM SLRDC HAL Hyderabad Factory area.

Dismantling tile work in floors and dado laid in cement mortar including stacking material within 50 metres lead for thickness of tiles above 25 mm and up to 40 mm

Dismantling of RCC work manually by mechanical means including staking of steel bars and dispposal od unserviceable materilas within 50 meter lead as per direction of EIC

Providing PCC1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Removing the existing damaged door shutters / cup boards of various sizes and types carefully, including cleaning the site and removing the debris upto a lead of 500 M ,carrying the shutters/ any other useful material and depositing / stacking in the factory civil stores including cost of tools, labour, transportation etc., all as specified and directed by the EIC.

Removing existing damaged door frame and depositing the useful material in the factory stores including cleaning the site and removing the debris upto a lead of 100 M including cost of tools, labour, transportation etc., all as specified and directed by the EIC.

Brick work with non modular fly ash bricks WITH CM(1:6) conforming to IS:12894,class designation 10 average compressive strength in super structure above plinth level up to floor V level in :

Providing plastering by rendering 15 mm thick Cement mortar 1:6 (one part Cement : Six parts fine sand) over concrete / brick surfaces like ceiling, walls etc.,wherever required and finishing smooth and even, using trowel with all necessary scaffolding at all heights, etc., complete with rates including cost of all material, tools, labour, wastages etc., all as directed and approved by EIC.

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of size 600x600mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete

Providing & laying of 9mm thick ceramic tile dado/wall tiles of size 300mm x 450mm of (KAJARIA / NITCO / JHONSON / REGENCY) or equivalent make as approved by EIC laid over a bed of 15mm thick CM(1:4) base coat including pointing/fixing the jointing with joint fillersof matching color/shade of tiles including cost and conveyance of all materials and water to work site including cost of base coat, all operational, incidental, and labour charges such as mixing mortar, fixing in position, including lift charges, curing etc., complete for finished item of work in all floors.

Supplying and apply two coats of Wall painting with premium interior acrylic emulsion paint , having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture approved brand and manufacture, having low VOC (Volatile Organic Compound ) content., including applying additional coats wherever required to achieve even shade and colour.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading,transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and fixing Pre -laminated medium density fibre board exteriorgrade (Grade-I) IS:14587:1998 marked, to frame, backing or studdingwith screws etc. complete ( Frames, backing or studding to be paidseparately) Pre-laminated with decorative lamination on both side exteriorGrade - I MDF Board 12 mm thick confirming to IS:14587

Providing and fixing in position (at any ht.& level) two track glazed, Aluminium powder coated sliding windows with sections conforming to JINDAL catalogue including providing & fixing 4.80mm thick plain float glass of MODI / SAINT GOBAIN make with approved quality rubber / nylon gaskets, providing and fixing standard Aluminium 75mm handles, locking arrangement, necessary wheel / rollers etc.,. The windows shall be fabricated with Aluminium extrusions as described below of series B: a) Bottom member two track section 61.85 x 31.75 x 1.20 mm. b) Top & sides of two track section 61.85 x 31.75 x 1.30mm. c) Shutter top & bottom 40 x 18 x 1.29mm d) Shutter interlock 40x27x 1.29mm e) Shutter handle side 40 x 18 x 1.29mm complete with rates including cost of material ,tools, labour, transportation etc., all as directed and specified by EIC. [Gaps between wall / beam and Al. member shall be filled with slicon and made good].

Providing, manufacturing and erecting Partly glazed and partly panneled single / Double leaf Aluminium door using standard anodized powder coated sections of JINDAL, HINDALCO make as detailed below all of approved make.(Including necessaryews,fasteners,cleats,rods etc.Specification for each shutter :-a) Bottom members -97.30 x 44.45x 2.15mm b) Top members - 47.62x44.45x1.95mm c) Side member - 47.62 x 44.45 x 1.82mm d) Middle member - 49.91 x 44.45 x 1.60mm; Door member of SL NO19566 of JINDAL e) 12mm thick pre laminated twin finish exterior grade of Novapan MFPB (PTX) - Superior grade or TESA / ASIS / ARCHIDPLY or any other particle board having ISI Mark or 12mm thick both side finished MDF boards f) Glass - 5.00mm thick plain float glass of MODI / SAINTGOBAIN make g) Rubber gaskets - Good quality of approved make h) Glazing clips - Weight of 0.097Kg/RM. I) Aluminium hinges 125mm long - 3Nos j) Aluminium handle 150mm long - 2 Nos. k) Concealed lock of make godrej/sheel 4 lever l) Aluminium tower bolts 200mm long - 2 Nos. m)Miscellaneous -Al. cleats, screws ,Door sealant, etc

Supplying and Fixing 18mm thick mat finished / polished Granite slabs for staircase of required size of approved quality, colour, texture and finish, jointed with cement slurry and pointed with cement mixed with pigment to match the colour, laid over a screed of Cement Mortar 1:6 (One cement : Six coarse sand), 25mm minimum thick including wastages,curing complete with rates including cost of all material,labour,tools,transportation etc., complete all as approved, specified and directed by Engineer In Charge.

Providing and fixing 15mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Providing and fixing 20mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Providing and fixing 25mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Supply and Fixing of ISI marked flush door shutter of 30mm thick of approved make single shutter with hard wood solid block board type Core having cross bands and hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides Cost includes cost of material, transport , fixing charges all taxes etc. complete for finished item of work

Supplying and fixing 1mm thick decorative laminated sheet of Formica /Decolite / Green Lam / Royal touch or equivalent make (confirming to IS) of approved colour, shade, pattern & surface finish, fixed on the existing plywood surface of wall panelling,cupboard shutters on one face and cupboard sides etc., wherever required using synthetic adhesive of Fevicol make or equivalent, including cost of all materials, labour, wastages etc., complete in all respects and as directed and specified by EIC.

Providing and fixing Aluminum body hydraulic Door Closer of designated type B of Everite / Hardwin/ Universal make conforming to IS 3564 to the doors with necessary screws etc. complete as specified and directed by EIC.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Supplying and fixing 40 mm dia CPVC rigid Pipe ISI mark with necessay elbows and bends etc suitable for drainage lines of approved quality including fixing, jointing, embedding in the wall etc., complete, with rates including cost of material, (MR) etc.,all as approved, specified and directed by EIC.

Supplying 150X150 mm SWG gully trap with CI cover along with suitable CI frame complete with rates including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.

Providing and fixing factory made PVC doors frame of size 50x47mm with a wall thickness of 5mm made …etc all as specified and as directed by EIC

Providing and fixing factory made PVC doors shutter consisting of frame made out of MS tube of 19 guage …etc all as specified and as directed by EIC

Supplying & Fixing 5 mm thick beviled edges with sideless with SS/CP screws/ studs etc looking mirrors of size 600X450MM complete, with rates including cost of material, labour charge tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.

Supplying and fixing of 20mm dia gun metal gate valves of below mentioned dia, of ZOLOTO / LEADER make or equivalent approved make & quality complying to IS, having screwed ends including fixing to the pipe lines with teflon tape etc., complete, with rates including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.

Supplying and fixing of 25mm dia gun metal gate valves of below mentioned dia, of ZOLOTO / LEADER make or equivalent approved make & quality complying to IS, having screwed ends including fixing to the pipe lines with teflon tape etc., complete, with rates including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.

Supplying and fixing of Table top wash basin with battery based scensor operated pillar cock etc ..all as specified and as directed by EIC

Supplying and fixing health faucet of JACQUAR make of Cat 563 or equivalent approved make complete, with rates including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.

Supply and fixing of paper holder with flap of PARRYWARE/ HINDWARE/JAGUAR/ESSESS make with all necessary connections complete as directed and specified by EIC.

Providing and fixing Glass urinal partition , nuts, screws etc., complete including cutting and making good the walls, and floors, where required complete with rates including cost of material, labour charges, tools, lifts, leads etc., all as approved, specified and directed by EIC.

Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete Kiln seasoned and chemically treated hollock wood

Supplying and fixing 100mm x 75mm diameter CI Nahani trap of approved quality & make including finishing in CM 1:4 all as directed, approved and specified by EIC, complete with rates including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.

Supplying and fixing of 15mm dia CP long/short body bibcock of "JAQUAR/ESSESS" or equivalent make etc all as directed, approved and specified by EIC, complete with rates including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.

Supplying and fixing of towel ring of "JAQUAR/ESSESS" or equivalent makeetc all as directed, approved and specified by EIC, complete with rates including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.

Supplying and fixing of 15mm dia CP 2 in 1 bibcock of "JAQUAR/ESSESS" or equivalent make etc all as directed, approved and specified by EIC, complete with rates including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.

Supplying and fixing of 15mm dia CP Angle cock "JAQUAR/ESSESS" or equivalent makeetc all as directed, approved and specified by EIC, complete with rates including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.

Providing and fixing white vitreous china infrared sensor operated urinal along with with providing and fixing electric sensor also including providing fxing with ,CP waste coupling ,Spreader, brackets, HB elbow, bottel trap, with necessary screws etc., complete including cutting and making good the walls, and floors, where required complete with rates including cost of material, labour charges, tools, lifts, leads etc., all as approved, specified and directed by EIC.urinals

Supplying and fixing hanad dryer of make Viking or equivalent including with all necessary fittings etc complete with rates including cost of material ,tools, labour, transportation etc., all as directed and specified by EIC.

Supplying and fixing SS grab bar/rail of 24" length and 32-40mm dial with all required acessaries and fitting etc complete with rates including cost of material ,tools, labour, transportation etc., all as directed and specified by EIC.

Supplying and fixing Alumnium ventillator having lowers with necessary screws etc., complete including cutting and making good the walls, using pinheaded glass for lowers with rates including cost of material, labour charges, tools, lifts, leads etc., all as approved, specified and directed by EIC.urinals

Supplying and fixing stainless steel railing of pipe 1-2" dia pipes including cutting grinding starigthining with required fittings as per site requirments and as directed by EIC

Providing and fixing false ceiling at all heights with integral densified With 15 mm thick tegular/butt edged with perforation plain/designer light weight calcium silicate Anti-Microbial Bio-Safe coated false ceiling tiles Confirming to JIS-Z2801 and ASTM G-21 calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mmthick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to formgrid module of size 600 x 600 mm, suspended from ceiling singgalvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws. The workshall be carried out as per specifications, drawing and as per directionsof the Engineer-inCharge.

Providing and fixing in wall lining flat pressed three layer (medium density) particle board of 12mm thick or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed arrangement and screws etc. complete :

Providing & Fixing 1.00mm thick decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.

Dismantling wooden boardings in lining of walls and partitions,of thickness 10 mm to 25 mm excluding supporting members but including stacking within 50 metres lead.

HAL/SLRDC/CE/T/26-27/2

HAL/SLRDC/CE/T/26-27/2

CIVIL WORKS FOR RENOVATION OF TOILETS IN LIBRARY AND MISC CIVIL WORKS IN PRATIBHA AUDITORIUM,SLRDC HAL FACTORY AREA.

Description

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

GST NO.:

PAN No.:

Contact details

Please Enter Contact person Name

Pls Enter Mobile No

Average annual financial turn over during the last 3 years, ending financial year 2025 [ should not be less than 30% of Amount put to tender]. Turnover for 3 years are compulsory.

TURN OVER IN Rupees

Pls Enter Turn over in Rs. for all the 3 years

ESI & PF Nos with proof (If any)

Related Document to be Uploaded to e-Procurement Portal

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender submission.

Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs

Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

80% (One Work)

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please enter Details for Work No 1

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No II

work done

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No III

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

Pls Enter Details for Person holding Power of Attorney

DECLARATION I

Pls Accept The Delarication

DECLARATION II

Pls Accept the Delaration II