PROVN OF TEMPORARY PARKING SHED AT COO COMPLEX, SHED AT STN ARMOURY, PCC PATH AND IRON GRILL DOOR AT VARIOUS LOCATIONS AT AF STN SONEGAON, NAGPUR

Amount

Excavation in post holes (or similar holes) in hard/ dense soil each hole n. exc. 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc. 25cm, watering and removing surplus soil to a distance n. exc. 50m and making good surfaces complete all as specified and directed.

Excavation in post holes (or similar holes) in soft/ loose soil each hole n. exc. 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc. 25cm, watering and removing surplus soil to a distance n. exc. 50m and making good surfaces complete all as specified and directed.

Excavation over areas in hard/dense soil not exc. 1.50m deep and getting out complete all as specified and directed.

Excavation over areas in soft/loose soil not exc. 1.50m deep and getting out complete all as specified and directed.

Removing excavated soil exceeding 250m and not exceeding 500m and depositing where directed complete all as specified and directed.

Removing excavated soil exceeding 1.5 Km and not exceeding 5 Km and depositing where directed complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M&L for hardcore of broken stone or boulders of gauge not exceeding 63mm,deposited, spread and levelled in layer not exceeding 15cm thick, watered and rammed to true surface complete all as specified and as directed.

M&L for providing PCC (1:2:4) type B-2 using 40mm graded stone aggregate as in foundation filling mass concrete complete all as specified and directed.

M&L for providing PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation filling mass concrete complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate set in CM 1:6 as in coping, kerbs, channels, water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc. complete all as specified and directed.

Fair cutting n exc 10 cm width or girth on exposed surfaces of brickwork such as in splays, chamfers, etc. including rubbed finish and waste complete all as specified and directed.

S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: clamps; hold fasts; and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S&F framed work such as grills, gratings etc., with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks & similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.

S&F rolled mild steel framed work as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates Fe 290 Gde-E-165 Quality B complete all as specified and directed.

S&F rolled mild steel framed work as Joist, channel, angle, or tee sections,fixed independently, without connecting plates, etc. Fe- 410 E-250 complete all as specified and directed.

S&F Fe 410-W (Gde-E- 250) quality-A Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

S&F 11mm to 15mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5cm long complete all as specified and directed.

S&F 16mm to 20mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5cm and not exc 30cm long complete all as specified and directed.

S & F 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed

M&L for Mild steel sheet of 1.25mm thick eaves gutters, galvanised class 3, half round of dia 100mm with rounded edges complete all as specified and as directed.

M&L for nozzle pieces (Out lets)made up of 1.25mm thick sheet of dia 100mm for eaves gutter complete all as specified and as directed.

S&f pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and no pigments over sand cushioning laid as per manufacturer's instructions complete all as specified and directed. (Note : - Sand shall be measured and paid seperately.)

M&L for sand filling under floors or in paver block including watering and consolidation complete all as specified and as directed.

M&L for 100mm thick PCC 1:4:8, type D2, using 40mm graded stone aggregate as in sub base of flooring/ path all as specified and as directed.

M&L for 100mm thick PCC 1:2:4, type B2, using 40mm graded stone aggregate as in sub base of flooring/ path all as specified and as directed.

M&L for 15mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces externally finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of chalk whiting primer complete all as specified and directed.

M &L for preparation new steel and iron surfaces not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of primer of red oxide complete all as specified and as directed.

M &L for preparation new steel and iron surfaces not otherwise described n.exc 10cm width or girth and applying two coats of synthetic enamel paints over one coat of primer of red oxide complete all as specified and as directed.

M &L for preparation of new Eaves gutter and pipes any description, n. exc 60 cm girth including holderbats, distance pieces, etc. (length measured over bends, branches etc.) and applying two coats of synthetic enamel paints over one coat of primer of red oxide complete all as specified and as directed.

M&L for Cast iron rainwater socketed pipes 100 mm dia with cement joints, without ears complete all as specified and as directed.

M&L for Bends or elbows, square, or obtuse of dia 100mm complete all as specified and as directed.

S&F 75mm dia UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc. complete all as specified and directed.

S&F UPVC (SWR) bend any radius suitable for 75mm dia pipes complete all as specified and directed.

karambir constructions (BID ID -3140814)

PURVA ENTERPRISES (BID ID -3147254)