SPECIAL REPAIR OF TOILET, BATHROOM AND REWIRING IN BUILDING NO P-100/1, 2, 3, 4, 5, 6, 7, 8 AND 9, PROVISION OF ADDITIONAL TOILET FOR OPS ROOM AT BUILDING NO P-170 AT SUNJUWAN AND PROVISION OF ARBORICULTURE AT MIRAN SAHIB UNDER GE JAMMU

Amount

B/R Portion: - Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each and removing from site complete all as specified and as directed.

Taking down chowkhats or frames with shutters exceeding 1.5 Sqm and not exceeding 4 Sqm each (without taking off shutters from the frame) including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts and and removing from site complete all as specified and as directed.

Taking down chowkhats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frame) including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts and and removing from site complete all as specified and as directed.

Taking down door and refixing shutters after making necessary repair of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and as directed.

Material and labour for pressed steel frames made of 1.25 mm thick mild steel sheet of profile 125 X 60 mm for doors with one or more rebates including necessary lock strike plate, shock absorber, 20mm dia, 60mm long mild steel conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, holdfasts / lugs etc complete all as specified and as directed.

Material and labour for pressed steel frames made of 1.25 mm thick mild steel sheet of profile 105 X 60 mm for doors with one or more rebates including necessary lock strike plate, shock absorber, 20mm dia, 60mm long mild steel conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, holdfasts / lugs etc complete all as specified and as directed.

Material and labour for cement concrete (1:3:6) type C-0 (using 12.5 mm graded crushed stone aggregate) as in filling of chowkhats, hold fast, blocks etc including necessary form work complete all as specified and directed.

Supply and fixing 35mm thick second class hardwood plain framed panelled factory made shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces fitted to chowkhats complete all as specified and as directed.

Supply and fixing 35mm thick factory made second class hard wood glazed and skeleton shutters, open, rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR part-I section 8, clause 8.24(a) complete all as specified and as directed.

Supply and fixing factory made solid PVC moulded door shutter, with particle board core 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing complete all as specified and as directed.

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and directed.

Supply and fixing box type steel windows / ventilator comprised of tubular frame and shutters made out of 1.25 mm thick mild steel sheet tube factory made with double side shutters wire gauged shutter and glass glazed shutter (wire cloth and glass panes will be measured and paid separately) with side hung shutters with mild steel handles and mild steel peg stay dovetailed or welded including 02 No's mild steel tower bolts 150 mm long for each leaf and 08 mm square bar grill / guard bars at spacing as shown on drawing welded mild steel flat iron frame work, including other fittings, hinges, mild steel handles, tarred hold fasts, PCC blocks for hold fasts and AC opening if required including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and fixing mild steel powder coated colour decorative type drapery rod of 20mm dia approved pattern and design including decorative knobs (02 x No for each opening) and powder coated mild steel flat iron brackets fixed with steel screws and PVC rawl plugs / grips complete all as specified and as directed.

Supply and fixing galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

Supply and fixing 3mm thick sheet glass ordinary quality and glazing with oil putty in square pane complete all as specified and as directed.

Description all as per Ser item No 15.00 here-in-before but figured, pin head type and glazing with oil putty or wooden beads, in squares each pane complete all as specified and as directed.

Supply and fixing 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type), not less than 12mm dia and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy including necessary nuts and bolts complete all as specified and as directed.

Supply and fixing 200mm long aluminium anodised barrel tower bolts of extruded section (ISI marked) complete all as specified and as directed.

Supply and fixing 100mm long butt hinges, medium weight cold rolled mild steel (ISI marked) complete all as specified and as directed.

Supply and fixing 140mm size (overall length of cover plate) floor door stopper of aluminum alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Supply and fixing mild steel 300mm rat rail spring including roller plate complete all as specified and as directed.

Supply and fixing 150mm long aluminium handle extruded alloy, fabricated 'D' type anodised (ISI marked) complete all as specified and as directed.

Material and labour for preparation of new wooden surfaces of any description not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of pink wood primer complete all as specified and as directed.

Material and labour for preparation of old wooden or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

Dismantling boarding in any description, fixed in any position with nails etc complete all as specified and directed.

Supply and fixing in repairs prelaminated particle board, 18 / 19mm thick, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including fixing of teak wood beading on open edges of particle board complete all as specified and as directed.

Supply and fixing hasp and staple 100mm long, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Supply and fixing in repairs stainless steel plate rack 1.25mm thick of size 900 x 775 x 250mm including angle iron brackets and taking down of 19mm thick particle board shelf and removal from site complete all as specified and directed.

Taking down cement plaster / wall tiles from concrete / stone surfaces including racking out joints, hacking for key, scrubbing down with water etc and its removal from site complete all as specified and as directed.

Material and labour for rendering 15 mm thick in cement mortar (1:6) finished even and smooth without using extra cement (internal plaster) complete all as specified and as directed.

Material and labour for rendering 15 mm thick in cement mortar (1:4) finished even and smooth without using extra cement (external plaster) with water proofing compound complete all as specified and as directed. Note: - Water proofing compound shall be paid separately.

Material and labour for 10 mm thick plaster on ceiling in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for applying two coats of oil bound distemper on new surfaces including preparation of surfaces of walls including one coat of chalk whiting complete all as specified and directed.

Material and labour for preparation of old decorated surfaces of wall by brooming down and scrapping wherever necessary and applying one coat of oil bound distemper over a coat of wall putty whereever necessary complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces and applying three coats of white wash on ceilings complete all as specified and as directed.

Material and labour for preparation of old decorated surfaces of ceiling and applying two coats of white wash complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of wall, soffits / fascia etc and applying two coats of exterior emulsion paint over a coat of wall care putty complete all as specified and as directed.

Material and labour for preparation of old decorated surfaces of walls, soffits / fascia of chajja / roof slab etc and applying one coat of exterior emulsion paint over a coat of wall care putty complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparing plastered or unplastered new surfaces of walls and applying three coats of white wash complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Material and labour coloured non skid ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in cement mortar (1:6) complete all as specified and as directed.

Material and labour coloured glazed ceramic tiles in vertical surface 350 x 250 x 7mm / 450 x 350 x 7mm thick on vertical surfaces such as skirting, dados and risers to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces including 10mm thick rendering in cement mortar (1:4) complete all as specified and as directed. Note: - Design, shape and pattern of fixing of tiles shall be as directed by Engineer-in-Charge.

Material and labour machine cut kota stone 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rounding of open edge, rubbing and polishing complete (mirror face) as in floor, stair step over 20 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

Material and labour granite 20 mm thick (table rubbed and polished) as in platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with the shade of granite over and including 15mm thick screed in cement mortar (1:4) edges of slab to be rounded from all sides (including cutting and polishing) complete all as specified and as directed.

Taking down 15 mm bore galvanized steel water tubing with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Taking down 20 mm bore galvanized steel water tubing with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Supply and fixing 15 mm bore medium grade galvanized steel water tubing with all fittings fixed complete to walls and ceilings or laid on floors complete all as specified and as directed.

Supply and fixing 20 mm bore medium grade galvanized steel water tubing with all fittings fixed complete to walls and ceilings or laid on floors complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position of 15 mm bore of pipe (walls, ceiling or floor etc) complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position of 20 mm bore of pipe (walls, ceiling or floor etc) complete all as specified and as directed.

Supply and fixing in repair 15mm bore stop valves, cast copper alloy (ISI marked) screwed down, high pressure with crutch or butterfly handle, screwed both ends (externally threaded) for iron pipe or for unions complete all as specified and as directed.

Supply and fixing in repair 20mm bore stop valves, cast copper alloy (ISI marked) screwed down, high pressure with crutch or butterfly handle, screwed both ends (externally threaded) for iron pipe or for unions complete all as specified and as directed.

Supply and fixing in repair angle valves chromium plated screwed both ends for 15mm bore of iron pipe or for union and fixed complete all as specified and directed.

Supply and fixing in repairs vitreous china squatting pan 'Orrissa' pattern, size 580 x 440 mm white, with integral foot rests complete including provision of lime concrete bedding, including connection to P or S trap, and to flushing pipe, anti-syphonage pipe, etc including making good to floors complete all as specified and directed.

Supply and fixing in repair PVC low level flushing cistern, 10 litre capacity, symphonic action type, white inlet valve, float, handle, including brackets, 15mm PVC connection 600mm long and 32mm dia PVC flushing pipe including fixing of long screws chromium plated complete all as specified and as directed.

Supply and fixing in repair wash hand basin 550 x 400mm vitreous china (white) with cantilever cast iron / angle iron brackets embedded in concrete block including brass chromium plated waste coupling 32mm bore waste pipe PVC 32mm bore complete all as specified and as directed.

Supply and fixing in repairs 15mm bore pillar cocks chromium plated, screwed for 15 mm bore of iron pipe or brass ferrule and fixed complete all as specified and as directed.

Supply and fixing stop valves cast copper alloy 15mm dia, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with capstan handle screwed both ends for iron pipes or for unions and fixed in repairs complete all as specified and directed.

Supply and fixing in repair chromium plated shower rose wih swivel joints brass chromium plated 125 mm size, including fixing to steel pipe or union complete all as specified and directed.

Supply and fixing in repairs chromium plated brass towel rail fancy type 600mm long fixed with chromium plated brass screws complete all as specified and as directed.

Supply and fixing rotational moulded polyethylene water storage tanks of capacity 500 litres (cylindrical vertical with closed top) hoisted and fixed in position including necessary check nuts and washer and 20 mm dia PTMT ball valve complete all as specified and directed.

Supply and fixing in repairs stainless steel sink with drainage board, made of 1.00mm thick sheet for kitchen or laboratory with plug, washers, waste pipe including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets, connecting union to pipe, overall size 915mm x 460mm, bowl size (410 x 330 x 160mm) complete all as specified and as directed.

Supply and fixing in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

Supply and fixing in repair bib taps, long body, fancy type chromium plated, screwed for 15mm bore of iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Dismantling of 75 mm and 100mm dia PVC / cast iron pipes, jointed in cement mortar or lead joints and taking out of trenches if required complete all as specified and as directed.

Supply and fixing PVC (SWR) pipe 100mm dia and vent pipe in any length with or without ears with cement joints laid in trenches or in floor or fixed to walls complete all as specified and as directed.

Supply and fixing PVC (SWR) pipe 75mm dia and vent pipe in any length with or without ears with cement joints laid in trenches or in floor or fixed to walls complete all as specified and as directed.

Supply and fixing PVC (SWR) pipe 50mm dia and vent pipe in any length with or without ears with cement joints laid in trenches or in floor or fixed to walls complete all as specified and as directed.

Supply and fixing 100mm bore sand cast iron pipe, waste and vent pipe in length with or without ears, with cement joints complete all as specified and as directed. Note: - Dismantling if required, rates are deemed to be included in the quoted rates.

Supply and fixing 75mm bore sand cast iron pipe, waste and vent pipe in length with or without ears, with cement joints complete all as specified and as directed. Note: - Dismantling if required, rates are deemed to be included in the quoted rates.

Material and labour cast iron bends (any radius), diminishing pieces or tapers of pipe 100mm bore complete all as specified and as directed.

Material and labour cast iron bends (any radius), diminishing pieces or tapers of pipe 75mm bore complete all as specified and as directed.

Material and labour PVC (SWR) bends (any radius), diminishing pieces or tapers of pipe 100mm bore complete all as specified and as directed.

Material and labour PVC (SWR) bends (any radius), diminishing pieces or tapers of pipe 75mm bore complete all as specified and as directed.

Supply and fixing in repair 100mm PVC (SWR) bends with access door, with (ordinary or inverted) spigot with parallel branches with single (Y) laid in trenches or fixed to walls complete all as specified and as directed.

Demolition of brick work built in cement mortar or cement lime mortar complete all as specified and as directed.

Material and labour for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar (1:4) complete all as specified and directed.

Material and labour for 100 mm thick PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection, concrete shall be laid in alternate bays not exceeding 3m in length, finished fair and even complete all as specified and as directed.

Material and labour for 15mm thick screed bed or bedding layer for laying floor finishes in cement mortar (1:6) complete all as specified and as directed.

Material and labour for chequered cement concrete tiles 20cm x 20cm x 25mm / 30cm x 30cm x 25mm thick, pre polished set, jointed and pointed in neat cement slurry with grey / color cement and pigment in floors complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and removing from site complete all as specified and as directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5m in depth and getting out in soft / loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soil complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Material and labour mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending, spirally to hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Material and labour for reinforced cement concrete (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) in foundation, including fafts, footing, foundation beams, plinth beams, bases for columns, etc basement slabs, under reamed piles and mass concrete, manhole cover slab etc complete all as specified and as directed.

Material and labour PVC (SWR) floor trap with steel grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 dia of outlet in 100mm complete all as specified and as directed.

Material and labour for PVC vent cowls for 75 mm bore of pipe complete all as specified and as directed.

Material and labour for PVC (SWR) floor trap 63mm dia for wash hand basin, including 40mm dia HDPE pipe upto the trap of bathroom and jointing with solvent with outlet pipes, stainless steel grating etc fixed in repairs complete all as specified and as directed.

Supply and fixing PVC (SWR) pipes, 110 mm bore, single socketed, in any length, with rubber joints, fixed to walls complete including fixing clamps etc with nut and bolts including taking down of pipe complete all as specified and as directed.

Supply and fixing PVC (SWR) bend / shoe, 110 mm bore, fixed to pipes complete including fixing clamps etc with nut and bolts complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and removing from site complete all as specified and as directed.

Material and labour for cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) 25mm thick in floors, roof etc complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

Material and labour for cement concrete (1:5:10) type E-2 (using 40 mm size coarse aggregate) as in mass filling, in sunken floor of toilets complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement sand mortar (1:4) mixed with and including liquid integral water proofing compound 0.20 litre per 50 kg bag of cement both on floor and wall after proper curing and drying and apply epoxy resins coating polymer modified cementation coating like brush bond of Fosroc Pidilite and Bostic as per manufacturer's instructions both on floor as well as on walls of sunken floors complete all as specified and as directed by Engineer-in-Charge.

Removing existing treatment from roof surfaces such as tiling, fungus moss, dust etc cleaning the RCC roof surface wire brushing complete all as specified and directed.

Material and labour for rendering 20 mm thick in cement mortar (1:4) on concrete surfaces (on roof slab) finished even and smooth without using extra cement, mixing liquid water proofing compound complete all as specified and as directed. Note: - Liquid water proofing compound shall be measured and paid separately.

Cleaning and removing loose / dirt materials from the roof surfaces and applying bitumen primer @ 0.30 litre / Sqm, providing and laying 3mm thick APP modified water proofing membrane weighing not less than 3.5 kg / Sqm reinforced with non woven polyster mat weighing not less than 160 gm / Sqm, having softening point not less than 800 N / Sq cm, tearing strength of 180 N, with minimum of 10 cm side laps and 15cm end laps, laying by application of torch and applying two coats of aluminium paint complete all as specified and directed.

Supply and fixing in repair chromium plated peg set 175mm to 250mm fixing with wall all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs soap shelf, PVC white / colour approximate size 450 x 125 x 40 mm as per sample complete all as specified and as directed.

Supply and fixing Vitreous china wash down water closet pan of size 360 X 725 X 735 mm of 300 mm 'S' Trap with multipurpose knob for washing and water flow adjustment, functional key for setting water and seat temperature dual wash function, self cleaning nozzle before every wash with antibacterial seat and wash nozzle and smart safety alarm complete all as specified and as directed.

Supply and fixing 10 litre capacity low level flushing cistern, with inlet float valve, moulded from virgin polypropylene single flush including provision of 32 mm dia PVC flush pipe and making connections complete all as specified and as directed.

Supply and fixing white ceramic wall mounted urinal with sensor type wall hung of shape and size 370 X 315 X 620 mm with all accessories, inlet holes 30 mm dia and waste outlet pipe of 30mm dia with vertical distance between the centre line of the top inlet and the centre line of the waste outlet holes 420mm complete all as specified and as directed.

Supply and fixing ceramic table top wash hand basin on table top and shape and size 480 X 470 X 190 mm fixed on granite including long shunk shown neck pillar tap complete all as specified and directed.

Material and labour for 15mm thick rendering in two coats on brick work or concrete surface in cement mortar (1:4) surface finished even and fair without using extra cement complete all as specified and as directed.

Material and labour for preparation of new surfaces and applying two coats of distempering walls with distemper oil emulsion paint over a coat of primer complete all as specified and as directed.

Cutting of openings in brick walls / RCC beams, demolition of floor, taking out existing floor trap / Nahani trap / 'P' or 'S' trap / bends, taking out lead joints, replacing the existing cast iron pipe 4" / 3" dia of shorter length with minimum 45 cm long cast iron pipe of 4" / 3" dia (as per site requirement) again providing lead joints falling inside floor / wall loosening the complete stack outside the building, thereby bringing the complete stack away from the wall ranging between 12 to 15 cms, providing new stacks / clamps of 50 X 3 mm (mild steel) and of required size complete all as specified and as directed by Engineer-in-Charge. (including all necessary scaffolding, lifting arrangement upto the height of four storeyed building).

Supply and fixing in repair cast iron 100 mm dia bore pipe, branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

Supply and fixing in repair cast iron 75 mm dia bore pipe, branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

Supply and fixing chromium plated grating doom 100 mm dia including embedding in tiles with white cement complete all as specified and as directed. (minimum weight 25 grams).

Supply and fixing Aluminium door shutter (Double or single leaf) with frame made out of aluminium section of size 83 X 44 X 1.5 mm in frame, style, top and bottom rail using section 114 X 44 X 1.5 mm including 5 mm thick float glass panes of modi fixed with heavy duty aluminium clips at top panel neoprin rubber gasket, angle cleats etc complete with heavy duty floor door closer, aluminium handle approved shape two numbers, aluminium tower bolt 200mm size 01 no, 4 lever lock of approved manufacturer, complete with cost of all materials, labour, T&P, wastage, including making good existing surface disturbed during taking of old chowkhat etc, sections size be vary as per availability but weight should not be less than 1.3 Kg / RM for frames and styles including powder coating of approved colour (Thickness of powder coating not less than 50 microns) complete all as specified and as directed.

Supply and fixing solar control film 25 micron reflective type sticked to glass panes as per manufactuer's instructions complete all as specified and as directed.

Supply and fixing mild steel peg set 45 cm long and 50mm wide with five aluminium hooks complete all as specified and as directed.

Supply and fixing towel rail 450 mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 170 grams) complete all as specified and as directed.

Supply and fixing glass shelf assembly fixed in toilets complete all as specified and as directed.

Supply and fixing rotational moulded polyethylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engineer-in-Charge.

Material and labour for 75mm thick cement concrete (1:4:8) type B-2 (using 40mm graded crushed stone aggregate) as in sub floors, sub bases, floors and paving etc complete all as specified and directed.

Material and labour slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exceeding 200 mm thick (Horizontal or sloping) fair finished surfaces complete all as specified and directed.

Surface excavation in any type of soil not exceeding 30cm in deep and averaging 15cm in deep and getting out all as specified and as directed by Engineer-in-Charge.

Supplying and stacking of good earth at site including royalty and carriage for all leads and lifts (earth measured in stacks will be reduced by 20% for payment) and good earth spreading and neatly levelling within a lead of 50m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or and manure before and after flooding trench with water (excluding the cost of imported sludge or manure) complete all as specified and as directed.

Supplying and stacking of well decomposed cow dung / meegni manure at site of work including royalty and carriage with all leads and lifts (cost of dung manure measured in stacks will be reduced by 8% for payment) complete all as specified and as directed.

Removal of excavated soil to a distance exceeding 250m but not exceeding 500m and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed.

Digging holes in any type of soil and refilling the same with the excavated earth by removing of stone boulders and mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and dressing including removal of rubbish and dressing including removal of rubbish and surplus earth and boulders, if any with all leads and lifts (cost of manure, any with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) complete all as specified and as directed.

Holes for plantation of trees, 60cm dia and 75 cm deep.

Supply and plantation of good quality of doob grass with grassing with "Doob" grass in rows 5 cm apart in either direction including watering, fine dressing the ground and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing including supplying good earth if needed complete all as specified and as directed.

Supply and planting of below mentioned shrubs plants height 2' - 3' in poly bags (Peeple) including spreading of neem cake oil etc complete all as specified and directed.

Supply and planting of Fishtail Palm Tree height 4' - 8' including spreading of neem cake oil etc complete all as specified and directed.

Supply and planting of Ashoka Tree height 4' - 8' including spreading of neem cake oil etc complete all as specified and directed.

Supply and planting of Lemon Tree height 3' - 6' in poly bags including spreading of neem cake oil etc complete all as specified and directed.

Supply and planting of Kinno Tree height 3' - 6' in poly bags including spreading of neem cake oil etc complete all as specified and directed.

Supply and planting of Mango Tree height 3' - 6' in poly bags including spreading of neem cake oil etc complete all as specified and directed.

Supply and planting of Guava Tree height 3' - 6' in poly bags including spreading of neem cake oil etc complete all as specified and directed.

Water Supply works

Supply and laying tubes of size 25 mm bore, medium grade, galvanised, laid in trenches with and including all fittings such as tees, bends, unions, elbow reducers, clamps, etc complete all as specified and directed.

Supply and laying tubes of size 15mm bore, medium grade, galvanised, laid in trenches with and including all fittings such as tees, bends, unions, elbow reducers, clamps, etc complete all as specified and directed.

Supply and fixing 15 mm dia bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 25 mm stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for galvanised iron pipes or unions complete all as specified and directed.

NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engineer-in-Charge and GE. NOTE NO 3: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.

E/M Portion: - Taking down old unserviceable copper / aluminium point wiring concealed / batten (light, fan, socket or power) complete, including fixture and fittings such as switches, sockets, ceiling roses, bell push, bell electric, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and any type of switch board wooden / iron, round block etc, removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

Material and labour for point wiring for one light / fan / call bell point controlled by one 5 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 Sqmm copper conductor multistranded FRLS, PVC insulated (unsheathed) drawn into new concealed PVC rigid / steel conduit and into existing cast iron / pressed steel sunken / terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified and as directed. Notes: - (a) Wiring shall be done by using proper colour coding. (b) Earth wire shall be of green colour. (c) On RCC roof / ceiling PVC conduit shall be provided on surface with proper fixing clamps all as directed by Engineer-in-Charge.

Description all as per Ser Item No 144.00 here-in-before but for one 5 pin socket outlet 5 amps on the same board complete all as specified and as directed.

Description all as per Ser Item No 144.00 here-in-before but for one 5 pin socket outlet, 5 amps, independent complete all as specified and as directed.

Description all as per Ser Item No 144.00 here-in-before but for one 5 pin socket outlet, 15 Amps on independent board with cables 2.5 Sqmm size complete all as specified and as directed.

Supply and fixing in replacement for switch piano, flush type, single pole one way 5 Amp, 240 volts complete all as specified and as directed.

Supply and fixing in replacement stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required complete all as specified and as directed.

Supply and fixing in replacement switch socket outlet combined 5 pin, 5 amp flush type, 240 volts complete all as specified and as directed.

Supply and fixing in replacement switch socket outlet combined 2 in 1, 3 pin, 5 amp and 15 amp flush type, 240 volts complete all as specified and as directed.

Material and labour in replacement for lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

Material and labour in replacement self ballast LED retrofit lamp with PVC body and PC diffuser 9 watt 230 Volt 6500K complete all as specified and as directed.

Supply and fixing ceiling rose 3 terminal surface type complete all as specified and as directed.

Supply and fixing in replacement LED lights fitting 1 x 20 W, 220 V, AC decorative box type complete with LED tube rod 20 watts driver, holder and power factor > 0.95, 100 Lumen / Watt, 6500 K cool day type conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete (4' ft long) with LED rod 20 watt, 230 Volts 50 Hz complete all as specified and as directed.

Material and labour for replacement distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and as directed by Engineer-in-Charge. Note: - Distribution board and MCB's should be of same make.

Supply and fixing in replacement 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 Amp, in the MCB distribution board complete with connection, testing and commissioning all as specified and as directed.

Supply and fixing SPN 40 to 63 Amp rating 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB distribution board complete with connection, testing and commissioning all as specified and as directed.

Dismantling and taking down old unserviceable street / security lights and material and labour for new LED street light fittings of 30 watt system wattage and high pressure die cast aluminium housing with sealed toughened glass cover, TIP - 66 protection suitable for pole mounting SMD LED array with lense, cool white 6500 K, LED efficacy >120 lm/W and system efficacy 110 lm/W, 240 Volts AC, 50 Hz, CRI>70% operating voltage range 160 V-270 V, Power factor>0.95, working temperature range - 20º C to 60º C, built in surge protection more than 10 KV with facility of power supply shall be removed without removing light fitting from pole including making proper connection complete including cutting, welding, drilling holes, nut bolts, washer complete all as specified and as directed by Engineer-in-Charge.

Material and labour in replacement for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 6 Sqmm for phase and neutral and one run of 4.0 Sqmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the new rigid PVC concealed conduit fixed on wall. Two runs of cable for phase / neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and as directed. Note: - Wiring shall be done in proper colour coding.

Material and labour for earthing complete with galvanised mild steel earth plate electrode of size 600 x 600 x 6mm thick buried directly in ground earth (in vertical) earth pit not less than 2.25 metre deep below normal ground level with top edge of the earth plate not less than 1.5 metre below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC (1:2:4) type B-1 pre-cast RCC cover slab using reinforcement with suitable handle made of round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specified and as directed.

Supply and fixing in replacement plug top 15 Amps complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

Supply and fixing TPN distribution board 125 suitable for accomodating TPN miniature circuit breaker (MCB) 4 pole of following poles and current carrying capacity in the distribution board complete with connection, testing and commissioning all as specified and as directed.

Supply and fixing 415 V, 10 KA 'B' curve TPN 40 to 100 Amp miniature circuit breaker (MCB) 4 poles and current carrying capacity in the distribution board complete with connection, testing and commissioning all as specified and as directed.

Disconnecting and taking out defective service cable any size and any type from roof, pole, pipe, floor, wall etc complete all as specified and as directed.

Supply and laying, connecting and testing XLPE underground cable insulated and overall sheathed with aluminium conductor heavy duty 1100 volts grade 10 Sqmm 2.0 core laid in trenches / on poles / road crossing or passing through existing / new pipe under road crossing, clamping on wall etc complete all as specified and as directed. Note: - (i) Earth work, sand, bricks, removing, returning filling, Aluminium thimbles / lugs will be paid separately. (ii) Cost of laying electrical cable through new / existing pipe under road, buildings, railway tracks, highways are included in the quoted rates. (iii) All equipments, machinery or tools if required for laying electrical cable through new / existing pipes are provided by the contractor without any extra cost.

Material and labour for point wiring for one light / fan / call bell point controlled by one 5 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 Sqmm copper conductor multistranded FRLS, PVC insulated (unsheathed) drawn into and including new concealed PVC rigid / 1.8 mm wall thickness ISI marked including pressed steel with existing colour terminated boxes of modular metal flush boxes of any way i.e. (1 to 8 way as per site requirement) for mounting switches, sockets, fan regulators etccomplete all as specified and as directed for the following: - Notes: - (a) Suitable modular white cover sheets with frame as specified to be provided in replacement to mild steel / galvanised sunken boxes and measured and paid separately as per relevant item. (b) Wiring shall be done by using proper colour coding. (c) Earth wire shall be of green colour. (c) On RCC roof / ceiling PVC conduit shall be provided on surface with proper fixing clamps all as directed by Engineer-in-Charge.

Description all as per Ser Item No 168.00 here-in-before but for one 5 pin socket outlet 5 amps on the same board complete all as specified and as directed.

Description all as per Ser Item No 168.00 here-in-before but for one 5 pin socket outlet, 5 amps, independent board complete all as specified and as directed by Engineer-in-Charge.

Description all as per Ser Item No 168.00 here-in-before but for one 6 pin socket outlet, 15 Amps on independent board with cables 2.5 Sqmm size complete all as specified and as directed.

Supply and fixing modular switch 1 way 6 A, 1 module, 240 Volts ISI marked complete all as specified and as directed.

Supply and fixing modular switch 1 way 16 A, 1 module, 240 Volts ISI marked complete all as specified and as directed.

Supply and fixing socket, 6 A - 2/3 pin combined 2 module, 240 Volts ISI marked complete all as specified and as directed.

Supply and fixing socket, 6 A / 16 A - 2/3 pin combined 2 module, 240 Volts ISI marked complete all as specified and as directed.

Supply and fixing modular white cover plate with frame 3 module, 240 volts, ISI marked complete all as specified and as directed.

Supply and fixing modular white cover plate with frame 6 module, 240 volts, ISI marked complete all as specified and as directed.

Supply and fixing exhaust fan made of study engineering plastic complete with louvers shutter, voltage 230 V, 50 Hz, 1200 RPM, copper winding of sweep 250 m complete all as specified and as directed.

Supply and fixing metal body water heater storage type geyser 25 litre capacity, conforming to ISI, single phase with working voltage 240 Volts, 50 Hz complete all as specified and as directed. Notes: - (a) The house for heating element and thermostat are separate. (b) Rates are deemed to be included in the cost for fixing of 4 numbers rawl plug of suitable size (4" to 6") nuts and bolts, grouting work in RCC / Brick wall.

Supply and fixing gun metal or gate valves with iron head, screwed both ends for iron pipe and fixed complete size of 15mm dia complete all as specified and as directed.

Material and labour PVC connection pipe heavy duty ISI marked (Hot and Cold) of 15 mm size with PTMT nuts of length 350-450 mm from galvanised iron pipe to Geyser input and output complete all as specified and as directed.

Supply and fixing NRV metal electric water heater pressure relief check safety valve for 15 mm dia pipe complete all as specified and as directed by Engineer-in-Charge.

Material and labour for replacement distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 4 way 240 volts double door complete all as specified and as directed by Engineer-in-Charge. Note: - Distribution board and MCB's should be of same make.

Supply and fixing LED light fittings 20 W LED 230 Volts 50 Hz, 4 feet long made out with opal diffuser for glare free and smooth light distribution 6500 K cool day type conforming to ISI including LED tube light connecting up with two core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing in replacement LED light fitting mirror type with high output diffuser 2 feet, 10 watt, 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing LED light fitting mirror type with high output diffuser, 2 feet, 9 watt 220 V AC including connecting up with two core flexible copper conductor cable of suitable size complete all as specified and as directed.

M/S TRIKUTA BUILDERS

M/S A TO Z ENGINEERS

BALVINDER SINGH AND SONS

M/S VED PAUL MAHAJAN

Bidder Name

M/S VED PAUL MAHAJAN

M/S TRIKUTA BUILDERS

M/S RAVINDER SINGH

BALVINDER SINGH AND SONS

M/S A TO Z ENGINEERS