SPECIAL REPAIRS TO INTERNAL ROAD FROM EXIT GATE TO BLDG NO. A/O/23 OF CARIAPPA COLONY AT PMS UNDER GE PANAGARH

Amount

Excavating over areas, n.exc 1.5 m deep and getting out in Soft/loose soil complete all as specified and directed.

Removing excavated material n. exc 50m and depositing where directed at a level n.exc 1.5m above the starting point, complete all as specified and directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area n. exc 400 sqm and depth exc 50mm and n. exc 100mm deep complete all as specified and as directed.

M & L for Rolling and consolidating formation surfaces in filling by power roller exc 8 tones & n exc 12 tone capacity to required gradient and camber complete all as specified and as directed by Engr-in-Charge.

M&L for Shingle filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled, and blinded with earth and rammed including watering complete all as specified and as directed.

M&L for 150mm thick Soling (or sub base) with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified and as directed.

M&L for 10cm thick (compacted thickness) WBM with Granite, trap on basalt aggregates of grading 1 (90 to 40mm size), spread, rolled and consolidated to gradient and camber required complete all as specified and as directed.

M&L for Preparing unsurfaced water bound macadam by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and as directed.

M&L for Applying evenly a priming/tack coat with bituminous primer (VG-10) at 10 kg per 10 sq metre complete all as specified and as directed.

M & L for Preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and as directed.

M&L for Applying evenly a priming/tack coat with bituminous primer (VG-10) at 5 kg per 10 sq metre (Bifurcation of rate 5Kg/X Sqm complete all as specified and as directed.

M&L for Premix bituminous, macadam of binder content of 4% by wt of total mix (VG-30) laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) laid with mecanical paver complete all as specified and as directed.

M & L for applying 25mm thick mastic asphalt consisting of an intermate homogeneous mixture on mineral filler, well graded fine and coarse aggregate industrial grade 85/25 bitumen as per IS 73 of 2006 cooked at 170 degree to 200 degree centigrade laid hot trowelled and floated by means of wooden float bitumen mastic after spreading and while still hot in plastic condition shall spread over with bituminous precoated fine aggregate of size 20mm @ 0.005 Cum per 10 Sqm mixed with 0.17 Kg per Sqm of industrial bitumen grade 85/25 for antistaciding including all material, labour, tools and plants complete all as specified and as directed.

Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and as directed.

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufacturer instructions complete all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block with mixture of grey cement and pigments any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and as directed.

M&L for 100mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in sub base for receiving floor finish complete all as specified and as directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as specified and as directed.

Schedule of Credit

ANIMA ENTERPRISE

M/s Ajeet Kumar Singh

Sabitri Jhunu Enterprise