GE863/EWS-T-33 OF 2020-21

Amount

Dismantling of plain or corrugated steel sheeting, pre-painted galvalume aluminium zinc coated any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floor aprons etc. laid bedded and pointed in any mortor complete all as specified and directed.

Taking down chowkats or frames not exc 1.5 sqm each with shutter (without taking off shutter from the frame) and removing complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm but not exceeding 4 sqm each but with shutter (without taking off shutter from the frame) and removing to store complete all as specified and directed.

Taking down Shutters of any description exc 2 sq. m each complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq. M each complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and directed.

Dismantling water tanks of capacity exc 250 & n exc 500 litres and removing to store complete all as specified and directed.

Dismantling water tanks of capacity exc 500 & n exc 1000 litres and removing to store complete all as specified and directed.

S & F for 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed.

ditto- All as per item no 11 above but except sheeting (any thickness).

S & F 0.63mm thick Plain Galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) complete all as specified and directed.

S & F for 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and directed.

S & F for Pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of any colour (as approved) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

ditto- All as per item no 15 above but except sheeting (any thickness).

M & L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality) complete all as specified and directed.

M & L for preparation of new painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint (first quality) over a coat of red oxide primer complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.

M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 but EXCEPT STONE complete all as specified and directed.

M & L for providing precast cement concrete Type C1 1:3:6 using 20mm graded stone aggregate and set in cement mortar 1:6 as bond stone complete all as specified and directed.

M & L for providing cement concrete Type C1 1:3:6 using 20mm graded stone aggregate as in coping complete all as specified and directed.

M & L for rendering 15mm thick on stone walling in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floor, including rough finished without using extra cement complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in floor, including rough finished without using extra cement complete all as specified and directed.

M& L for 50mm thick cement concrete type C2, 1:3:6 (using 40mm graded stone aggregate) as in plinth protection finishing fair and even complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B0 using 12.50mm graded stone aggregate as in floor, including rough finished without using extra cement complete all as specified and directed.

M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.06 Sqm but not exc 0.11Sqm as in floor laid over and including 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cment to match colour tiles complete all as specified and directed.

M & L for Glazed ceramic tiles (200x200mm) x 7mm thick, in floors etc. over and including 15 mm thick screed bed in cm (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L 12 mm thick Ply wood, grade BWR, type BB fixed with screws to timber frame work as in ceiling etc complete all as specified and directed.

M & L 6 mm thick Ply wood, grade BWR, type BB fixed with screws to timber frame work as in ceiling etc complete all as specified and directed.

M & L 6 mm thick Ply wood, grade BWR, type BB fixed with screws to timber frame work as in partitions/ shutters, wall etc complete all as specified and directed.

S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S & F 35mm thick Second class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkat complete all as specified and directed.

S & F 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars) chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and directed.

S&F powder coated aluminium door shutters aluminium section weighing 0.55Kg/m including necessary jointing cleats, glazing clips rubber neoprene packing, handles 2 nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed.

S&F powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55Kg/m including necessary jointing cleats, glazing clips rubber packing, anodised aluminium snap beading screws etc complete all as specified and directed.

S & F Galvanized mild steel wire cloth, 0.63 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.

S&F plain sheet glass/pin headded glass of 3 mm thick in Squares not exceeding 0.50 Sqm in each pane with oil putty and clips complete all as specified and directed.

M&L for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed.

M&L for cutting holes in stone walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 exceeding Half brick wall and not exceeding one brick wall complete all as specified and directed.

M & L for preparation surface of wood and wood based material and treated with tar or coal tar black paint, treating ends of posts, backs of chowkats, etc., area tarred exc 0.1 sqm but n exc 0.5 sqm each complete all as specified and directed.

M & L for preparation surface of wood and wood based material and treated with tar or coal tar black paint, treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area n exc 0.1 sqm each, complete all as specified and directed.

M & L for providing cement concrete type C1 1:3:6 using 20mm graded stone aggregate as in Hold fast block complete all as specified and directed.

S&F Aluminium barrel tower bolt of 100mm long stove enamelled black with bright bolt complete all as specified and directed.

S&F Aluminium barrel tower bolt of 75 mm long stove enamelled black with bright bolt complete all as specified and directed.

S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of truded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S & F 75 mm long extruded mild steel anodised Butt hinges with galvanized mild steel and fix complete all as specified and directed.

S & F 100 mm long extruded mild steel anodised Butt hinges with galvanized mild steel and fix complete all as specified and directed.

S&F 100mm long Aluminium alloy Butt hinges with galvanised mild steel pin, anodise and fixed, type B-21 complete all as specified and directed.

S&F Aluminium alloy pressed handle oval type stove enamelled black of 125mm long fixed with screw to shutter complete all as specified and directed.

S&F Aluminium alloy pressed handle oval type stove enamelled black of 75 mm long fixed with screw to shutter complete all as specified and directed.

S&F in repair aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

S & F 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed complete all as specified and directed.

S & F 300mm MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store all as specified and directed.

S & F 15mm bore Steel tubing 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors

ditto- All as per item no 60 above but fixing only

S & F 20 mm bore Steel tubing 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

ditto- All as per item no 62 above but fixing only.

S & F 500Ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S & F 1000Ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S & F in repair 15mm Stop valves Fancy type CP, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repair 20 mm Stop valves Fancy type CP, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S & F in repairs bib taps 15mm dia fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repairs 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F in repairs 15mm dia brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S & F in repairs vitreous china wash basin, white flat back, size 550 X 400 mm excluding taps, chain and plug and porcelain stopper but including brackets, waste coupling, waste pipe etc complete all as specified and directed.

S & F in repairs vitreous China Water closet squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti-syphonage pipe, provision of lime concrete bedding etc complete all as specified and directed.

S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed.

S & F in repairs PVC valveless, syphonic action type, flushing cistern of 10 ltrs capacity, high or low level, white, with inlet, ball valve, float and handle including brackets, and connections to flush pipes of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed.

S & F in repairs Vitreous China Half stall type urinals, white, with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe complete all as specified and directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

S & F in repair chromium plated brass Soap dish fixed with chromium plated brass screws embedded in the wall complete all as specified and directed.

S & F in repairs 20 mm dia Aluminium anodised tubular towel rail, D type, 60cm long between flanges complete all as specified and directed.

S & F cast iron floor trap 75mm out let dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass, shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S & F in repairs stainless steel sink with drainage board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Net Contract Sum will be after deducting Sch Of Credit of Rs. 53520.00

M/S Shamsher Negi Dewa