PROVN OF SARVA DHARMA STHAL AT INF DIV AND EMP COY UNDER GE PANAGARH

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Surface dressing n.exc 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide and n exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and depth exc 1.5 m but n.exc 3.0m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Removing surplus excavated spoil/earth to a distance n.exc 50M and deposited where directed at a level n.exc 1.5 M above the starting point complete all as specified and directed.

Returning filling in soft /loose excavated soil including spreading leveling watering and well ramming in layers n.exc 25 CM complete all as specified and directed.

M&L for sand filling in floors or pavings, laid in layers n.exc 15 cm thick, spread, levelled and blinded with earth and rammed incl watering complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n.exc 15 cm thick, spread, levelled and blinded with earth and rammed incl watering complete all as specified and directed.

M&L for hardcore of broken stone or boulder of gauge exc 63mm but n.exc 75 mm deposited, spread & leveled in layers n.exc 15 cm thick watered & rammed to a true surface complete all as specified and directed. .

M&L for Plain Cement Concrete Type D2 14:8 (using 40 mm graded stone aggregate) as foundation and mass filling complete all as specified and directed.

M&L for M-25 (Design mix) using 20mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concert complete all as specified and directed.

M&L for M-25 (Design mix) using 20mm stone aggregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for M-25 (Design mix) using 20mm graded stone aggregate as in chajjas complete all as specified and directed.

M&L for M-25 (Design mix) using 20mm graded stone aggregate Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for M-25 (Design mix) using 20mm graded stone aggregate Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for M-25 (Design mix) using 20mm stone aggregate as in fins/fascia complete all as specified and directed.

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed. Make : L&T/ACC/Lafarge/Shyam Steel Pvt Ltd

M&L for brick work with fly ash bricks old size straight or curved on plan to any radius exc 6m mean radius in half brick thick walls build in CM (1:4) complete all as specified and directed. Make : L&T/ACC/Lafarge/Shyam Steel Pvt Ltd

M&L for 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in Damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surface of concrete complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for fair finished surface of concrete complete all as specified and directed.

Formwork to chullah hoods, chajjas, troughs and similar items including edges for fair finished surface of concretd complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc for fair finished surface of concrete complete all as specified and directed.

Formwork to fins, louvers, fascia for fair finished surface of concrete complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surface of concrete complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for TMT steel bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions)as in straight / semicircular shape with extruded built up standard tubular sections/ appropriate Z sections in plain / segmental shape and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, as per direction Engr-in-charge complete all as specified

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators as in straight / semi circular including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, in plain/segmental shape, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, friction hinges, locking arrangement etc complete as per architectural drawings and the directions of Engineer-in-charge complete all as specified. complete all as specified (either for openable/sliding shuttters) including all necessary fittings as directed

M&L for 25mm thick plain cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) to receive tiles complete all as specified and directed.

M&L for rendering 10mm thick in CM (1:3) on fair faces of concrete surfaces finished even and fair over roof slab complete all as specified and directed.

M&L for light shade vitrified Ceramic tiles 9 to10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floors set and jointed in neat cement slurry and pointed in coloured cement to match the shade using coloured tiles incl 15mm thick screed bed in CM (1:6) complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

M&L for light shade vitrified Ceramic tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in skirting set and jointed in neat cement slurry and pointed in coloured cement to match the shade using coloured tiles incl 10mm thick rendering/screed bed in CM (1:3) complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

M&L for joint free coloured non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.18 Sqm but not exc 0.38 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match the shade using coloured tiles incl 15mm thick screed bed in CM (1:6) complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

M&L for glazed ceramic tiles in vertical surface 450mmx 350mmx7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over cement screed bed 10mm thick in CM (1:3) complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

M&L for 75 mm thick, Cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate), as in sub base complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection finished even and smooth with out using extra cement complete all as specified and directed.

M&L for rendering 5mm thick in CM (1:4) finished even and smooth with out using extra cement over 10mm thick in CM 1:4 finished even and fair on brick or concrete surface walls, in two layers (10+5) using with integral water proofing compound (WPC will be measured and paid separately) complete all as specified and directed.

Forming square grooves in plaster n.exc 12mm deep and n.exc 15mm on face of walls in brick pattern all as directed Engineer-in-charge.

Supply only Liquid water proofing compound complete all as specified and directed. (Make : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)

M&L for 15mm thick in cement plaster CM (1:6) on brick or concrete surfaces finished even and smooth without using extra cement on wall complete all as specified and directed.

M&L for rendering 5 mm thick in CM (1:3) on ceiling finished even and smooth without using extra cement etc complete all as specified and directed.

M&L for 10mm thick in cement plaster CM (1:4) on brick or concrete surfaces finished even and fair with using water proofing compound complete all as specified and directed.

M&L for preparation ne surfaces of roof and applying two coats of Polyurethene (PU) acrylic based water proofing liquid compound (minimum 1.5 Ltr PU or manufacture instruction which are higher to be followed) over & including one coat of self priming primer @ one litre per ten sqm with reinforcing fabric sheet as per manufactures instruction to stop leakage/seepage from roof/wall complete all as specified and directed by the Engineer-in-Charge. Notes:- (i) As per description of theis item minimum two coats of Polyurethene (PU) acrylic based water proofing liquid compound over one coat of primer shall be carried out by as per manufacturer instruction. Please note no price adjustment shall be made, if as per manufacturer instructions more coats of Polyurethene(PU) acrylic based water proofing liquid compound & primer are required for roof treatment (ii) Quoted rate shall be deemed to be included for work in building/Structure of any height. (iii) Roof treatment to be carried out by authorised applicator.

M&L for three coats of white wash as in ceilings on newly plastered surfaces including preparation complete all as specified and directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; and similar work conforming to Fe.290.Gde-E-165 the grill shall be inserted in the wall surface including necessary drilling and grouting with cement etc complete all as specified and directed.

M&L for two coats of oil bound distemper over a coat of alkali resistant primer including preparion of new plastered surfaces of walls over a coat of 1.5 mm (minimum) thick wall care putty complete all as specified and directed. Make: Asian (Tractor)/Berger (Bison)/Shalimar (Premium Acrylic)

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar)

S&F pillar taps, cast copper alloy, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. Make : Hindware/Parryware/Jaquar

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F 20mm CPVC pipes SDR 11 & Plain/Brass CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified with all fittings plain/brass threaded complete all as specified and directed.

S&F in repairs 15mm CP angular stop cock with flange complete all as specified and directed. Make : Hindware/Parryware/Jaquar

S&F Sheet glass, 4.80 mm thick ordinary quality and glazing with oil putty in square or semicirculas exc 0.5 sq. m in each pane complete all as specified and directed.

S&F Sheet glass, 5.5 mm thick ordinary quality and glazing with oil putty in square / semicircular exc 0.5 sq. m in each pane complete all as specified and directed.

M&L for Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar 10mm thick (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types complete all as specified and directed.

M&L for Granite (of any type) tiles 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over screed bed in 20mm thick in CM (1:6) complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in Cement concrete in surface channels and drains complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in Sub base or base course finished even and fair complete all as specified and directed.

M&L for Machine pressed pre-polished coloured precast concrete interlocking paver block with grey cement and pigments any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) asin kerb stone including necessary form work complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for 15mm thick in CM (1:4) rendering on brick or concrete surfaces finished even and smooth with integral water proofing compound (WPC Measured and paid separately) on wall complete all as specified and directed.

Providing precast cement concrete louvres and jallies, 25mm thick (mea sured solid), including all mould- ings but excluding frame (Pre cast frame shall be measured separately and paid for under item set in CM (1:4) complete all as specified and directed.

E/M PORTION M&L for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectional area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)

All as per item No 67.00 above but 5 Amp socket on same board with other switches complete all as specified and directed.

All as per item No 67.00 above but One 3 pin 5 Amps socket out let points on independent board complete all as specified and directed.

M&L for point wiring for AC controlled by one, one way switch using 4 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including sheet metal modular box for suitable feame 2 to 8 module size and 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers & suitable lugs etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)

S&F switch modular type 6 Amp one way, one module, single phase, complete all as specified and directed. Make : Legrand/ABB/Anchor (woods)

S&F socket outlet 5 Amps, 5 pin, modular type, 2 module , single phase complete allas specified and as directed (for same board) Make : Legrand/ABB/Anchor (woods)

S&F switch socket combination 5 Amps, 5 pin, modular type, 3 module, single phase complete allas specified and as directed (for Independent board) Make : Legrand/ABB/Anchor (woods)

S&F switch socket combination 15/5 Amps,6 pin, modular type, 3 module, single phase complete allas specified and as directed (for Independent board) Make : Legrand/ABB/Anchor (woods)

S&F fan regulator modular step type 120 W 2 module suitable for 230 volt complete all as specified and as directed. Make : Legrand/ABB/Anchor (woods)

S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified and as directed.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) without remote complete all as specified and directed by the Engr-in-Charge. Make: Usha/Havells/Bajaj/CG

S&F ventilating metalic body exhaust fan 380/400 mm sweep 230 volt AC complete with louver and all accessories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing arrangement to wall connected with twin core twisted flexible copper conductor (23/.0076) of suitable size complete all as specified and as directed. Make: Bajaj/Havells/Usha/CG.

S&F submain two single core 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable PVC insulated unsheathed 1100 volts grade drawing in and suitable size PVC conduit (ISI Marked) concealed including 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 volts grade earth wire complete all as specified and directed. (Note: (i) Three runs cable and PVC conduit will be measured as a single unit. (ii) Quoted rate shall be included for necessary chasing, cutting and making good as per existing specification)

S&F submen two single core 6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable PVC insulated unsheathed 1100 volts grade drawing in and suitable size PVC conduit (ISI Marked) concealed including 6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 volts grade earth wire complete all as specified and directed. (Note: (i) Three runs cable and PVC conduit will be measured as a single unit. (ii) Quoted rate shall be included for necessary chasing, cutting and making good as per existing specification)

S&F recessed mounted round LED down light fitting 12 watt, 230 volts, made of aluminium PDC with high lumen package , high efficient including concealed metalic bos with all accessories complete all as specified and as directed by Engr-in-charge. Make : CG/ Havells/ Jaguar/Bajaj/Philips

S&F Orbit LED cylinderical light fitting 20 watt, 5700K, indoor type, white colour, beam angle 36º with driver including necessary connection complete all as specified and directed by the Engr-in-Charge. Make : CG/ Havells/ Jaguar/Bajaj/Philips

S&F wall mounted decorative type LED light fitting 1 x 9 watt with LED bulb 9 watt complete all as specified and directed by the Engr-in-Charge. Make : CG/ Havells/ Jaguar/Bajaj/Philips

S&F LED batten mirror light fitting 1 x 10 watt box type, Polycarbonate, cool day light, 6500K,1000 lumens with accessories complete all as specified and directed by the Engr-in-Charge . Make : CG/ Havells/ Jaguar/Bajaj/Philips

S&F LED post Top lantern IP-65 20 watt elegantly designed spon aluminium and high grade aluminium heat sink for efficient thermal management, sturdiness including all accessories for connection complete all as specified and as directed by the Engr-in-charge. Make : CG/ Havells/ Jaguar/Bajaj/Philips

S&F epoxy powder coated sheet metal enclosure for TPN DBs, 415 volts 4 ways, double door with mounting fitted with bus bar, DIN channel , neutral link and incoming contact, IP-43 complete all as specified and as directed. (Note: Quoted rate deemed to be including for suitable brass bolts, nuts, washers & cable lugs) Make : ABB/Legrand/Hager/Schneider

S&F epoxy powder coated sheet metal enclosure for DBs, single door, Single pole and neutral, 8 ways, with mounting fitted with 200 Amps rated bus bar, DIN channel , neutral link and incoming contact complete all as directed. (Note: Quoted rate deemed to be including for suitable brass bolts, nuts, washers & cable lugs) Make : ABB/Legrand/Hager/Schneider

S&F epoxy powder coated sheet metal enclosure for DBs, single door, Single pole and neutral, 4 ways, with mounting fitted with 200 Amps rated bus bar, DIN channel , neutral link and incoming contact complete all as directed. (Note: Quoted rate deemed to be including for suitable brass bolts, nuts, washers & cable lugs) Make : ABB/Legrand/Hager/Schneider

S&F MCB TPN 63 Amps, 'C' series 10kA, 415 Volts and to be housed in DBs complete including necessary connection including suitable cable lugs complete all as specified and directed. Make : ABB/Legrand/Hager/Schneider

S&F MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessary connection including suitable cable lugs complete all as specified and directed. Make : ABB/Legrand/Hager/Schneider

S&F MCB SP 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessary connection including suitable cable lugs complete all as specified and directed. Make : ABB/Legrand/Hager/Schneider

M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI strip 25 x 4 mm as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 32 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion.

Supply, laying, connecting, testing and commissioning of LT under ground cable XLPE insulated, armored heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 35 sqmm 3½ core complete all as specified and directed Note: Excavation,sand cushioning,brick will be measured and paid separtely.

M&L for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed . Note : Punned thickness 18 cm shall only be considered for payment

Supply and lay in trenches fly ash bricks, for cable protection all as specified and directed by the Engr-in-Charge.

S&F Pipes galvanized, 50 mm bore “light grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement or complete all as specified and directed. Make:Bansal/Jindal

S&F Pipes galvanized, 25mm bore “Medium grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement or complete all as specified and directed. Make:Bansal/Jindal

S&F gun metal, gate valve, 25 mm dia with iron wheel head, screwed both ends for iron pipe and fix complete all as specified and directed.

S&F capacity 1000 Ltrs rotational moulded polyethylene water storage tanks (Cylindrical, vertical with closed top minimum three layer) confirming to relevent IS complete including provision of all inlet outlet overflow and drain pipe fitting complete all as specified and directed by Engr-in-Charge Make : Prayag/Vectus/Sintex

S&F of high pressure PTMT float valve with epoxy coated alluminium rod and high density polythelene ball screwed for iron pipe 25 mm dia with fly nut complete all as specified and directed. Make : Vectus/Prayag

M&L for cutting existing steel tubing for alternation or addition of size 40 to 50 mm dia GI pipe complete all as specified and directed.

subash chander bahl

HAZRA ENTERPRISE

M/S Ali Trading Co

S.D.ENTERPRISE

NATIONAL CONSTRUCTION CO

ANIMA ENTERPRISE