Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹48,000
Closing Date
11 Aug 2026, 9:30 pmClosed
Visvesvaraya Technological University
Mr. Jayappa D
Construction of Toilets and Bathrooms at Meditation Centre at VTU Jnana Sangama Belagavi.
VTU/2026-27/OW/WORK_INDENT239
VTU/2026-27/OW/WORK_INDENT239
Open
Other Works
Two Tender Document System(Two Cover)
Visvesvaraya Technological University Belgaum
10 documents required · 10 mandatory
Mandating satisfactory completion as a prime contractor for at least one similar work to an extent of 50% of the cost of the work 9.60 Lakhs for Central/State Government /Quasi Government Department.
Achieved in at least two financial years an annual financial turnover of Rs 19.20 Lakhs
Class-III & above Registration Certificate.
GST registration Certificate
PAN Card copy
IT returns for last 5 years with Balance sheet of last 5 years
The contractor should visit the site of work and obtain the site visit letter duly signed by Resident Engineer, VTU, Belagavi and submit/upload through KPPP portal.
Name and Address of the Contractor for communication.
All other documents as mentioned in the bid document.
Bid capacity on letter head.
₹500
₹48,000
27 Jul 2026
27 Jul 2026
12 Aug 2026
10 Aug 2026
Construction of Toilets and Bathrooms at Meditation Centre at VTU Jnana Sangama Belagavi.
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...
Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour wit...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and constructing laterite size stone masonry in CM 1:6 using available Laterite Stone including cost and conveyance of materials (except Laterite), curing etc complete as per specification I...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing Brick work with common burnt clayNon Modularbricks of class designation 3.5 in super structure above plinth level inall shape sand sizes in Cement mortar 1:4 (1 cement : 4 coarse sand)includ...
Providing and fixing M.S.grills of required pattern in frames of windows etc.with M.S.flats, square or roundbars etc.including priming coat with approved steel primer all complete.Fixed to steel windo...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixinginpositionandapplying a priming coat of approved s...
Providing,fabricating and fixing Profiled Poly Urethane insulated Roof (PUF Sheet) having modular density 40kg/m square and size 1.06m width and 7.60m length sheets roof having external sheet of 0.5mm...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement : 4 fine sand) to brick masonry including rounding off corn...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement:6 fine sand) including rounding off corners wherever required smoothrendering, providing and removing scaffolding, including cost of mat...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mi...
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle gre...
Providing and laying Ceramic glazed floor tiles of size 300 x 300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, ...
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: Water thinnable cemen tprimer to give an even shade after thoroughly brooming the surface to remov...
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wallsurfaceto prepare the surface even and smooth complete as per speci...
Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two coat applied at1.67L/10m square over and including priming coat of exterior primer applied at 2.20 kg/10m square) wi...
Painting with Silicon & Acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: Two coats with paint of approved quality to give...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two coats on new work over an undercoat of suitableshade with ordinary paint of approve...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value58-60(Suspension...
Providing and fixing factory made Green certified, AntiTermite, UV resistant, high water absorbant single extruded WPC (WoodPolymerComposite) solid plain flush door shutter of required size comprising...
Providing and fixing door latch with necessary screws etc complete.Bright finished brass latch
Providing and fixing chromium plated brass handles of 100/125mm with necessary screws etc.complete.
Providing and fixing bright finished brass butt hinges with necessary screwsetc.complete: 125 x 85 x 5.5mm (heavy type)
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete: 200 x 10mm
Providing & fixing upvc ventilator with Exhaust Turbo speed fan with 5blades (300mmx 300mm & above sized fan) withcoppermotor having mounting arrangements as per direction of Engineer in chargeof work...
Providing & fixing of louvered ventilator made out of multi chambered UPVC (MatchingtoRAL-9016) sections and with minimum TiO2 (Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lead f...
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455 x 610 mm interna...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...
Providing and fixing Unplasticised PolyvinylChloride (uPVC) pipes,for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC...
Providing and fixing Unplasticised PolyvinylChloride (uPVC) pipes,for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25mm nominal bore
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approvedqualityandmake,includingpainting of fittings and brackets, cutting and making good the walls w...
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge
Providing and fixing Pillar cock with high neck with 265 mm Extended body made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy
Providing and fixing Angle cock light with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Providing and fixing Bidet spray made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class- Premium
Providing and fixing unplasticised PVC connection pipe with brass unions: 45 cm length 20 mm nominal bore
Providingand fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete-Class Economy
Providing and fixing C.P.brass bib cock of approved quality conforming to IS:8931
Providing and fixing Bibcock Two way with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy
Providing and fixing Soap dish wired with 200mm width made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy
Providing and fixing Towel rail 600mm length with hooks made of Stainless steelwith all concealed fitting arrangements & all necessary accesories complete - Class Economy
Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
GEYSERS, HEATERS & SOLAR WATER HEATERS Supplying 25 litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside Fiber...
Erection charges for fixing a upto 30 litres capacity wall mounting electric geysers using bolts, flat at one end nut and washers at the other end for through bolts and nuts and washers with 150x450x...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Clearing Grass and Removal of Rubbish & dumping to outside periphery by manual means.
Compacting Original Ground. Compacting original ground supporting embankment. Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankm...
Providing and laying 80mm thick factory made precast M30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential St...
Cast in Situ Cement Concrete M20 Kerb Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 15 grade foundation 150 mm thick, foundation having 5...
Electrical Works: Open System of wiring: Supplying heavy gauge PVC conduit pipe 25mm dia, 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing usi...
Supplying and fixing of 25 mm PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm .... etc. as required. Make: Mo...
Point wiring using Copper wire without switch.: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2 x 1.5 Sqmm (Phase&Neutral) & 1 x 1.0 sqmm (Ear...
Medium point above 3 Mtrs upto 6Mtrs from tapping point to out let via switch box
Long point above 6 Mtrs upto 10 Mtrs from tapping point to out let via switch box
Wiring for lighting/power circuit using one of FR PVC insulated 1100V grade, multistrand Copper conductor single core cable in open or concealed system of wiring with specified IS-694:1990 & confirm...
2.5 Sqmm Multi Strand copper wire
4.0 Sqmm Multi Strand copper wire
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Supplying and flush mounting powder coated/galvanized metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wal Make:...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing of modular switch/ Socket/ stepped electronic fan regulator/ dimmer/ telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 Make: Anchor Woods/Crabtree/...
6 Amps 3 way socket.
16 Amps one way switch
6/16 Amps Universal Socket
Supplying and fixing regular MCB distribution boards on wall/wood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 pha...
Supplying and fixing 32 amps TPN miniature circuit breaker on existing MCB distribution board using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit b...
Supplying of 2 feet - PVC Batten with integrated LED tube 9/10 W with high quality diffuser with Life of 25000 burning hours & 70 percentage lumen maintenance with CRI greater than 80. Power Input: 22...
Supplying of 4 feet - PVC Batten with integrated LED tube 20/22 W with high quality diffuser with Life of 25000 burning hours & 70 percent lumen maintenance with CRI greater than 80. Power Input: 220 ...
Supplying, installing testing and commissioning of new RO UV Water Purifier With following specification - water purifier should be able to purify by RO plus UV/ UF plus TDS methods tank to hold min...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Tender Documents.pdf
Tender Document • 13.74 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .