Karnataka

Active

Works

Buildings

Construction of Gene Bank and Other Infrastructure Facilities at University of Horticulture Sciences, Bagalkot (Including Road Work)

University of Horticultural Sciences

University of Horticultural Sciences Bagalkote | BAGALKOT, Karnataka

Amount: ₹8.1 CrCloses: 3 Jul 2026

Tender Value

₹8.1 Cr

EMD Value

₹12.2 L

Closing Date

3 Jul 2026, 9:30 pm

Tender Inviting Organisation

Name

University of Horticultural Sciences

Work Description

Construction of Gene Bank and Other Infrastructure Facilities at University of Horticulture Sciences, Bagalkot (Including Road Work)

Tender Information

Tender ID

302883

Reference Number

UHS/2026-27/BD/WORK_INDENT21

Tender Type

Open

Product Category

Buildings

Location

University of Horticultural Sciences Bagalkote

Source Website

Subscribe to view

Documents Required

22 documents required · 22 mandatory

Technical Bid

RequiredCurrent certificate of the Registration in KPWD/CPWD.

RequiredPAN Card

RequiredIncome tax returns of preceding last three years i.e., 2022-23, 2023-24 and 2024-25.

RequiredGST Registration Certificate.

RequiredTo qualify for Award of this contract, i. Each Tenderer in its name should have in the last five years i.e., 2020-21, 2021-22, 2022-23, 2023-24 and 2024-25. A. Achieved in at least two financial years a minimum financial turnover, in all classes of civil engineering construction works only, of Rs. 16,28,70,826.00

RequiredB. Satisfactory completed at least 50 percent of contract value as prime contractor at least 1 similar nature work of single building work with water supply/sanitary & electrification works, in State Govt/Central Govt/Public Sector Undertaking/Municipal Corporations of State Govt/Central Govt shall be with RCC framed structure value not less than Rs. 4,07,17,707.00. This has to be supported by the certificate issued by the officer not below the rank of an Exe.Eng Ref. notification for details

RequiredC. I- Executed in any one year during 2020-21, to 2024-25 following minimum qty of works. For Building Work 1, Earthwork Excavation, Cum, 1893.00, 2, Cement concrete RCC/PCC, Cum, 628.40, 3, Solid block masonry/Bricks masonry, Cum, 156.30, 4, Steel reinforcement, Tonne, 51.52, 5, Flooring with Granite/vitrified/glazed tile/ceramic/kota, Sqm, 723.60, 6, Plastering, Sqm, 3314.00, 7, Providing and applying painting, Sqm, 2588.00, 8, Door Shutters, Sqm, 55.20, 9, Windows and ventilators, Sqm, 69.60,

RequiredC. II - Executed in any one year during 2020-21, to 2024-25 following minimum qty of works.For Road Work, 1, EW/ Embankment / subgrade Earthen shoulder, Cum, 6674.24, 2, GSB, Cum, 1363, 3, WBM/WMM, Cum, 515, 4, Steel reinforcement, Tonne, 22.16, 5, CC Pavement, Cum, 1273.68, 6, PCC/ RCC, Cum, 44.80, 7, BM/SDBC, Cum, 2112.00

RequiredThe agency shall submit the total value of Civil Engineering Construction works executed and payments received in the last five years i.e. 2020-21, 2021-22, 2022-23, 2023-24 and 2024-25 as per sub clause 1.2 of section 3 of standard bid document as per relevant table. Enclose the turnover certificate from chartered accountant with chartered accountant UDIN number.

RequiredEnclose the list of work performed as prime contractor In the same name on works of similar nature during the last 5 years i.e. for 2020-21, to 2024-25 as per sub clause table 1.3 of section 3 of standard bid document as per relevant table Project Name, Name of Employer, Description of work, Contract number, Value of contract Rs. Lakhs, Date of issue of work order, Specified period of completion, Actual date of completion, Remarks explaining reasons for delay in completion of work,

RequiredEach tenderer should further demonstrate liquid assets and / or availability of Credit facilities of Rs. 2,44,30,624.00 amount put to tender Credit lines / letter of credit / certificates from banks for meeting the fund requirement etc, shall be enclosed as per the format under KW manual section 1.10 of section-3 of standard bid document. The format / information shall be as per certificate mentioned in the standard bid document.

RequiredTo qualify for award of this contract, each Tenderer/agency in its name should have in the last five years i.e.2020-21 to 2024-25 achieved in at least two financial years, turnover equal to Rs. 16,28,70,826.00 for each individual work In all classes of civil engineering construction works. In support of this claim, he has to provide year wise turnover certificate of duly certified by the Chartered Accountant with CA UDIN number as per sub clause 3.2. a of section 2 of standard bid document.

RequiredThe agency shall submit Statement indicating I. Existing commitments and ongoing works The above statements should be furnished as per clauses 1.5 A of Section 3 of Qualification information of Standard Bid document as per the table. These documents shall be countersigned by engineer in-charge not below the rank of Executive Engineer

RequiredThe agency shall submit Statement indicating II. Works for which tenders are already submitted The above statements should be furnished as per clauses 1.5 B of Section 3 of Qualification information of Standard Bid document as per the table. These documents shall be countersigned by engineer in-charge not below the rank of Executive Engineer

RequiredThe tenderer has to furnish the details of Technical Personnel working/Associated with him.

RequiredThe tenderer shall furnish the signed information on litigations if any in which the tenderer is involved. Other party ies, Employer, Details of dispute, Amount involved, Remarks showing present status

RequiredEach Tenderer should further demonstrate Availability by owning/hiring of the required/ specified key & critical equipments for this work as per the table appended in tender notification sl.no. 14 in technical conditions here with by giving information about brief specification of the equipment as per 1.6 of clause 3.3 a in respect of this agreement copy should be enclosed for hiring please Ref. notification for more details

RequiredThe quantities of work executed as prime contractor in the same name during the last five years i.e. 2020-21, 2021-22, 2022-23, 2023-24 and 2024-25 as per sub clause 1.4 of section 3 of standard bid document, as per relevant table.

RequiredBid capacity - the bidder shall necessarily enclose duly filled and completed tender capacity in enclosed format.

RequiredThe proposed methodology and program of construction, backed with equipment planning and deployment, duly supported with broad calculations and quality control procedures proposed to be adopted, justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion as per milestones.

RequiredPF & ESI registration certificate and enclose PF & ESI updated return filing documents.

RequiredThe Bidder must meet the following mandatory technical requirements. The Bidder shall have successfully completed at least 1 work involving construction of a Gene Bank facility within last 5 years. If the Bidder does not meet the above criteria independently, they shall submit a legally binding Technical Collaboration MoU with a specialized firm that meets the experience criteria. Ref. notification sl.no. 19 in technical conditions for more details

Eligibility Criteria

Tenders from joint ventures are not acceptable.

Bidders must attend the pre-bid meeting to clarify issues and clear doubts. This includes questions about the scope of work, technical specifications, and terms & conditions.

In the case of the death of a contractor after executing the agreement / commencement of the work, his legal heir, if an eligible registered contractor and willing, can execute and complete the work at the accepted tender rates irrespective of the cost of the work.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka.

The bidder shall ensure credit of tender processing fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date of bid submission

In the event of total amount quoted is below the estimated cost, the tenderer has to deposit the difference amount in the form of F.D.R, at the time of agreement as additional S.D for the un-balanced amount.

The tenderer is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches.

EMD payments through e-payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The intending tenderer is instructed to note that they should abide by the detailed instructions and conditions contained in the standard tender documents of applicable works manual and further orders there on.

GST and other taxes will be deducted as per prevailing Government orders.

The responsibility of safe custody of mechanical / electrical equipments / materials, etc., shall be with the contractor until they are finally handed over to be department.

The cable trench and laying shall be executed as per ISS No.1255-1967 duly taking all necessary precaution.

All necessary drawings, paper works, etc., and any other formalities required to be observed shall be the responsibility of contractor.

Whenever executing, authority insist proof of having purchased the materials (used during executing the work) for verification the contractor shall produce the purchase bills.

It is the responsibility of contractor to observe all necessary formalities of electricity companies for charging the lines and taking over the infrastructure like breaker lines TCs by electricity companies satisfactorily duly acknowledging the inventory of materials used in the work.

The contractor is responsible for safety and security of all materials

GST will be paid separately.

The contractor shall guarantee all the materials supplied by him including erection, electrification work for trouble free top class performance and against manufacturing defects, for a period of one year from the date of satisfactory completion and commissioning. The contractor shall make his own arrangement for rectifying defects/replacement of defective materials immediately on receipt of intimation from executing authority and power supply shall be restored. Failure of which, action will be taken to get the work rectification through other agency at the cost and risk of the contractor.

The contractor shall not deviate/alter/execute excess quantities or additional items without the prior approval of the competent authority.

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the standard tender documents KW-4 of KPWD / if any amendments are issued by the GoK.

It is the responsibility of the contractor to pursue and obtain all necessary approvals.

After delivery at site, the materials will be inspected, if the materials do not conform to relevant ISS/ISI and technical specifications by the University, then such materials will be rejected. The contractor shall replace the rejected materials at his own cost.

The tenderer shall pass on to the department all the warranties, benefits etc., from the original equipment manufactures.

The Contractor shall be solely responsible, not withstanding any stipulation by Owner or Engineer, for initiating, maintaining and supervising all safety precautions and programs, in connection with the work, and shall comply with all laws, ordinances, codes, rules, regulations and lawful orders of any public authority having jurisdiction for the safety of persons or property or to protect them from damages, injury or loss during the entire contract period, including non-working hours. Contractor shall maintain first aid facilities at site. All critical injuries shall be reported promptly to Engineer with a copy of Contractors report covering each personal injury, requiring the attention of a physician.

The Contractor shall quote the rates without adding GST for either materials or works contract (Service). GST payable by the Contractor under this works contract will be paid to the contractor separately over and above the contractors bid amount. The increase if any in the GST shall not be paid in the extended period of contract for which the contactor alone is responsible for delay as determined by the Authority

The Contractor shall supervise and carry out the Works as per the approved shop drawings or part there of efficiently and with his best skill and attention. He shall be solely responsible for means, methods, techniques, procedures and sequences of construction. The Contractor shall coordinate all parts of the Works and shall be responsible to see that the finished work complies fully with the Contract Documents, and such other instructions and variation orders as the Engineer may issue during the progress of the Works.

Royalty on construction materials and other taxes will be deducted as per prevailing Govt. orders. As per Karnataka state government order LD/300/LET/2006 bangalore dated: 01.01.2007 and government letter No. PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund.

Conditional Tenders will not be accepted.

The Employer reserves the right to reject any or all Tenders without assigning any reason.

The bidders should submit the Bid capacity of his firm. The details of 1.5(A) & 1.5(B) as applicable should be submitted in the prescribed format & should be signed by the concerned by the competent authority. In case the bidder does not furnish the above details/suppresses the actual facts/ produces false facts, along with the Technical bid, the technical bid of such bidder shall be considered for rejection.

All the documents to be furnished are to be attested by the Gazetted officer or by Notary before uploading in the e- Procurement portal.

Third party inspection will be carried out as per KTPP Act.

Contractor shall pay minimum wages to labour working under him as per prevailing labour act and amended time to time.

All the tenderers shall get updated with corrigendum / addendum issued from time to time during the entire tender process.

Contractors are advised to contact the department about the documentation and for other information before uploading the tender. Insufficient documentation will result in rejection of tender.

Contractors should not sub contract the works awarded for them.

Tenders with sublet / sub contract work done certificates are not acceptable.

License from the labour department shall be produce before agreement and payment towards PF, EPF and other taxes shall be made by the agency only.

Periodical inspection of works shall be done by third party quality inspecting team.

Any other GST / taxes deductions will be deducted as per prevailing government orders.

The agency shall carry out the work in phases (wing wise) as per the priority of the users department with in stipulated time limit.

Contractor shall get the prior approval of the engineer in-charge before using following materials.

Flooring items like ceramic tiles / vitrified tiles / granite slabs / cobble stones. Wood works, hardware fixtures, sanitary / water supply and electrical fixtures.

All hardware shall be of powder coated aluminum of heavy section or as per tender specifications.

The successful tenderer has to deposit 5% of contract price as security deposit before execution of agreement in the form FDR drawn from any scheduled / Nationalized bank drawn in favour of Comptroller, UHS Bagalkot.

The agency shall use only ACC / Ultratech / Birla Super / JK / Coramandal or equivalent cements of 43 / 53 grade OPC.

The agency shall use only approved TMT steel shall be used steel make like Tata / Jsw / Vizag / Sail or equivalent.

Monthly progress report as per bar chart shall be submitted.

The agency should establish the laboratory at site of work for periodical testing of materials.

Materials like steel, cement, bitumen etc., required for the work shall be procured by the contractors themselves & should be got tested by the quality control authority, before use on the work.

Department will not supply any material.

As per G.O. No. LD 300/LET/2006 Dt: 18/01/2007 1% will be deducted from each and every bill as per labour welfare tax act.

All the works are to be carried out as per the standard specifications issued from time to time by BIS & as per the relevant IS codes.

The contractor should employ only registered labours as per Govt. Circular No. PWD/198/BMS/2009/ Dated: 24-06-2009.

Existing commitments work details (B-value) should be furnished duly an attested by the concerned Executive Engineer as per Standard Tender Documents.

The increase in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time.

All duties, taxes, and other levies payable by the contractor under the contract, or for any other cause, shall be included in the rates, prices and total Tender Price submitted by the Tenderer.

The Tenderer shall fill in rates and prices and line item total (both in figures and words) for all items of the Works described in the Bill of Quantities along with total tender price (both in figures and words). Items for which no rate or price is entered by the Tenderer will not be paid for by the Employer when executed and shall be deemed covered by the other rates and prices in the Bill of Quantities. Corrections, if any, shall be made by crossing out, initialing, dating and rewriting.

Tenders shall remain valid for a period not less than ninety days after the deadline date for tender submission specified in Clause 16. A tender valid for a shorter period shall be rejected by the Employer as non-responsive.

In exceptional circumstances, prior to expiry of the original time limit, the Employer may request that the Tenderers may extend the period of validity for a specified additional period. The request and the Tenderers responses shall be made in writing or by cable. A Tenderer may refuse the request without forfeiting his earnest money deposit. A Tenderer agreeing to the request will not be required or permitted to modify his tender, but will be required to extend the validity of his earnest money deposit for a period of the extension, and in compliance with Clause 13 in all respects. Governed by PWD General Conditions of Contract (GCC), adapted for institutional works.

Termination: UHS may terminate for Persistent delay, Substandard work, Breach of contract, EMD forfeited in case of abandonment.

If BG submitted while issuing fresh BG or extending any existing BG, claim period of a minimum one year from the date of expiry of validity period of BG is to be specified invariably.

Instruments having fixed validity issued as earnest money deposit for the tender shall be valid for 45 days beyond the validity of the tender.

Any deposits/fees required to be paid to KEB and / or local inspectorate in connection with the electrical works, would be reimbursed to the contractor on furnishing of relevant receipts towards the above.

On completion of the work, the contractor shall obtain and deliver to the employer a certificate of final inspection and approval as given by the local ESCOMs & local Electrical Inspectorate office.

The contractor shall also be responsible for submission and follow up of applications for power sanction.

The contractors scope drawings/schemes as required by the local inspectorate and getting the same approved by the electrical inspectorate.

On completion of work, the contractor shall obtain approval from the electrical inspector for the installation itself.

The defect liability period shall be 3 Years from the date of completion of work.

Contractor should compulsorily submit the material dispatch permit (MDP) obtained from the department of mines and geology for royalty materials. If the bill is submitted without attaching the MDP, the bill will be rejected as per Department of mines and geology circular dated: 07/11/2023

Any casualties/damages during execution of works will be responsibility of the agency. University will not take any responsibility in case of any death/injuries during the tender period.

Compliance with KTPP Act and Rules.

The contractor shall also abide by the other conditions as laid down in Bid document.

All the tenderers shall get updated with corrigendum / addendum issued from time to time during the entire tender process (https://kppp.karnataka.gov.in).

Technical Criteria

Past Experience

To qualify for Award of this contract, (i) Each Tenderer in its name should have in the last five years i.e., 2020-21, 2021-22, 2022-23, 2023-24 and 2024-25. b) Satisfactory completed (at least 50% of contract value) as prime contractor at least one similar nature work of (single building work only with water supply / sanitary / electrification works and construction of bituminous road/CC Road) in State Government /Central Government / Public Sector Undertaking / Municipal Corporations of State Government /Central Government shall be with RCC framed structure including Excavation, PCC works, RCC footings, RCC roof, RCC columns, Beam works and bituminous Road/CC Road value not less than Rs. 4,07,17,707.00. (Specifically requiring a minimum of Rs 1,96,06,474.00 for building work and Rs 2,11,11,233.00 for road work must be supported by a completion certificate) This has to be supported by the certificate issued by the officer not below the rank of an Executive Engineer.

Satisfactory Performance Certificate

To qualify for Award of this contract, (i) Each Tenderer in its name should have in the last five years i.e., 2020-21, 2021-22, 2022-23, 2023-24 and 2024-25. (C) Executed in any one year during 2020-21, 2021-22, 2022-23, 2023-24 and 2024-25 following minimum quantities of works. Sl. No, Description, Unit, Qty Required, For Building Work 1, Earthwork Excavation, Cum, 1893.00, 2, Cement concrete RCC / PCC, Cum, 628.40, 3, Solid block masonry / Bricks masonry, Cum, 156.30, 4, Steel reinforcement, Tonne, 51.52, 5, Flooring with Granite / vitrified / glazed tile / ceramic / kota (qty inclusive of all), Sqm, 723.60, 6, Plastering, Sqm, 3314.00, 7, Providing and applying painting, Sqm, 2588.00, 8, Door Shutters, Sqm, 55.20, 9, Aluminum/UPVC/Steel/WPC/Wooden Windows and ventilators, Sqm, 69.60, For Road Work, 1, EW/ Embankment / subgrade Earthen shoulder, Cum, 6674.24, 2, GSB, Cum, 1363, 3, WBM/WMM, Cum, 515, 4, Steel reinforcement, Tonne, 22.16, 5, CC Pavement, Cum, 1273.68, 6, PCC/ RCC, Cum, 44.80, 7, BM/SDBC, Cum, 2112.00

Satisfactory Performance Certificate

Enclose the list of work performed as prime contractor (In the same name) on works of similar nature during the last 5 years i.e. for 2020-21, 2021-22, 2022-23, 2023-24 and 2024-25 as per sub clause table 1.3 of section 3 of standard bid document (as per relevant table). Project Name, Name of Employer, Description of work, Contract number, Value of contract Rs. Lakhs, Date of issue of work order, Specified period of completion, Actual date of completion, Remarks explaining reasons for delay in completion of work,

Work Done Certificate

The quantities of work executed as prime contractor (in the same name) during the last five years i.e. 2020-21, 2021-22, 2022-23, 2023-24 and 2024-25 as per sub clause 1.4 of section 3 of standard bid document, as per relevant table.

Work Done Certificate

The Bidder must meet the following mandatory technical requirements: The Bidder shall have successfully completed at least one (01) work involving construction and commissioning of a Gene Bank, Seed Bank, or Ultra-Low Temperature (ULT) Cold Storage facility within the last Five (05) years. If the Bidder does not meet the above criteria independently, they shall submit a legally binding Technical Collaboration Agreement or MoU with a specialized firm that meets the experience criteria. The Technical Associate must provide a written undertaking to provide full technical support through the construction and the Defect Liability Period (DLP).

Work Done Certificate

Capabilities of Vendor

Current certificate of the Registration in KPWD/CPWD.

PWD Registration Certificate (Class I/II/III/IV)

Each tenderer should further demonstrate liquid assets and / or availability of Credit facilities of Rs. 2,44,30,624.00 amount put to tender (Credit lines / letter of credit / certificates from banks) for meeting the fund requirement etc, shall be enclosed as per the format under KW manual section 1.10 of section-3 of standard bid document. The format / information shall be as per certificate mentioned in the standard bid document.

Line of Credit

The agency shall submit Statement indicating I. Existing commitments and ongoing works The above statements should be furnished as per clauses 1.5 (A) of Section 3 of Qualification information of Standard Bid document (as per the table). These documents shall be countersigned by engineer in-charge not below the rank of Executive Engineer. A) Existing Commitments and on-going works: Description of work, Place and state, Contract No. & Date, Name and address of employer, Value of contract (Rs. Lakhs), Stipulated period of completion, Value of works remaining to be completed (Rs. Lakhs), Anticipated date of completion

Others -- Enclose Existing Commitments and on-going works

The agency shall submit Statement indicating - II. Works for which tenders are already submitted The above statements should be furnished as per clauses 1.5(B) of Section 3 of Qualification information of Standard Bid document (as per the table). These documents shall be countersigned by engineer in-charge not below the rank of Executive Engineer. B) Works for which tenders already submitted: Description of work, Place & State, Name and address of employer, Estimated value of works (Rs. Lakhs), Stipulated period of completion, Date when decision is expected, Remarks if any

Others -- Enclose Works for which tenders already submitted

The tenderer has to furnish the details of Technical Personnel working/Associated with him.

Others -- Enclose details of Technical Personnel working/Associated with him.

Each Tenderer should further demonstrate: Availability by owning/hiring of the required/specified key and critical equipments for this work as per the table appended here with by giving information about brief specification of the equipment as per 1.6 of clause 3.3 (a Availability by owning at least 50% of the required following key and critical equipments for this work (b) the remaining 50 % can be deployed on lease/hire for all works provided, the relevant documents (commitment agreements etc.,) for availability for this work are furnished) in respect of this agreement copy should be enclosed for hiring. Sl. No., Description of the Equipment, Owned, Hired, Total No.s, 1, Tipper / Lorry, 2, 2, 4, 2, Concrete Mixture, 1, 1, 2, 3, Pin Vibrator, 1, 1, 2, 4, Water tanker, 1, 1, 2, 5, MS plate centering material (with supports), 500 Sqm, 500 Sqm, 1000 Sqm, 6, Static road roller, 0, 1, 1, 7, Vibratory road roller, 1, 1, 2, 8, excavator, 1, 1, 2, 9, Mechanical Paver finisher, 1, 0,1,

Others -- Enclose Availability by owning/hiring of the required/specified key and critical equipments

The tenderer shall furnish the signed information on litigations (if any) in which the tenderer is involved. Other party (ies), Employer, Details of dispute, Amount involved, Remarks showing present status

Others -- Enclose signed information on litigations (if any) in which the tenderer is involved.

Bid capacity - the bidder shall necessarily enclose duly filled and completed tender capacity in enclosed format.

Others -- Enclose Bid capacity

The proposed methodology and program of construction, backed with equipment planning and deployment, duly supported with broad calculations and quality control procedures proposed to be adopted, justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion as per milestones.

Others -- Enclose proposed methodology and program of construction

PF & ESI registration certificate and enclose PF & ESI updated return filing documents.

Others -- PF & ESI registration certificate and enclose PF & ESI updated return filing documents.

Financial Status

PAN Card (Enclose PAN Card)

Others -- Pan Card

Income tax returns of preceding last three years i.e., 2022-23, 2023-24 and 2024-25.

ITR Filed Copy (Mentioning PAN)

GST Registration Certificate.

GST Registration

To qualify for Award of this contract, (i) Each Tenderer in its name should have in the last five years i.e., 2020-21, 2021-22, 2022-23, 2023-24 and 2024-25. a) Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs. 16,28,70,826.00

Audited CA Certificate of Annual Turnover

The agency shall submit the total value of Civil Engineering Construction works executed and payments received in the last five years i.e. 2020-21, 2021-22, 2022-23, 2023-24 and 2024-25 as per sub clause 1.2 of section 3 of standard bid document (as per relevant table). Enclose the turnover certificate from chartered accountant with chartered accountant UDIN number.

Audited CA Certificate of Annual Turnover

To qualify for award of this contract, each Tenderer / agency in its name should have in the last five years i.e. 2020-21, 2021-22, 2022-23, 2023-24 and 2024-25 achieved in at least two financial years, turnover equal to Rs. 16,28,70,826.00 for each individual work (In all classes of civil engineering construction works). In support of this claim, he has to provide year wise turnover certificate of duly certified by the Chartered Accountant with chartered accountant UDIN number as per sub clause 3.2. (a) of section 2 of standard bid document.

Audited CA Certificate of Annual Turnover

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹12.2 L

Important Dates

Last Activity

3 Jun 2026

Published

3 Jun 2026

Bid Opening

6 Jul 2026

Download Ends

19 Jun 2026

Pre-Bid Meeting

24 Jun 2026

BOQ Preview

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. By Manual Means In area of light jungle

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

•

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

•

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20 Percentage E.C. or Lindane 20 Percentage E.C. at 3.19 l per sqm including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications.

•

Concrete, Formwork & reinforcement Providing and laying in position Cement Concrete for levelling course for all works in foundation. The graniteor trapor basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates

•

Concrete, Formwork & reinforcement Providing and laying in position Cement Concrete for levelling course for all works in foundation. The graniteor trapor basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates Ground Floor

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates b) Terrace floor

•

Providing and laying in position Cement Concrete for all Foundation works. The graniteor trapor basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

•

Additionalities of Formwork for work for Isolated Footing at 8 Percentage

•

Additionalities of Formwork for Combined Footing at 3 Percentage

•

Additionalities of Formwork for Columns Upto Plinth Beam at 70 Percentage

•

Additionalities of Formwork for Plinth Beam at 50 Percentage

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The graniteor trapor basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates

•

Additionalities of Formwork for Wall at 10 Percentage

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The graniteor trapor basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Ground Floor

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Terrace Floor

•

Additionalities of Formwork for Columns at 70 Percentage-Ground Floor

•

Additionalities of Formwork for Columns at 70 Percentage-Terrace Floor

•

Additionalities of Formwork for Roof Beam, Lintel Beam at 60 Percentage-Ground Floor

•

Additionalities of Formwork for Roof Beam, Lintel Beam at 60 Percentage-Terrace Floor

•

Additionalities of Formwork for Roof Slab at 50 Percentage-Ground Floor

•

Additionalities of Formwork for Roof Slab at 50 Percentage-Terrace Floor

•

Additionalities of Formwork for Staircase at 50 PercentageGround Floor

•

Additionalities of Formwork for Chajja at 45 PercentageGround Floor

•

Supplying, fitting and placing TMT FE 550 or 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapingor welding joints, tying with binding wire or soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Ground Floor

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse san

•

Providing Flushor Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine san after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge.

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse san including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Ground Floor

•

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse san including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Ground Floor

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings or wooden frames with rawl plugs screws etc. Ground Floor

•

Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Ground Floor

•

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Ground Floor

•

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size – 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Ground Floor

•

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever require and fitting the same with necessary stainless steel nuts and bolts complete, ior c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Ground Floor

•

FULLY GLAZED PARTITION WITH TOUGHENED GLASS & ALUMINIUM CHANNELS Providing and fixing full height glass partition with 12mm thick clear toughened glass as per design fitted over aluminium channels bottom and at top as detailed. The partition frame work above false ceiling to be fitted firmly to the true ceiling with necessary anchor fasteners. All the edges of glass shall have pencil nosing and machine polished. The joints in glass shall be filled with colourless silicone sealant as per manufacturer specifications., including necessary scaffolding support etc. Make: Saint Gobain Series - SGG ET 725 SGUor Equivalent

•

Providing Teak wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. Ground Floor

•

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Ground Floor

•

Providing and fixing in position fully panelled Teak wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) Ground Floor

•

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991 from manufacturer complete as per spcification. 35 mm thick both side teak Ground Floor

•

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid dooror windowor Clerestory windows & other Framesor Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powderor rice huskor wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kgor m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 Nor mm2 , modulus of elasticity 900 Nor mm2 and resistance to spread of flame of Class A category with property of being termiteor borer proof, wateror moisture proof and fire retardant and fixed in position with M.S hold fastor lugsor SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) Size 62 x 100mm Ground Floor

•

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powderor rice huskor wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kgor m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 Nor mm2 , modulus of elasticity 850 Nor mm2 and resistance to spread of flame of Class A category with property of being termiteor borer proof, wateror moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) 30 mm thickness Ground Floor

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Ground Floor

•

Providing supply and fixing SS 304 Aldrop - 250mm x 16mm for door shutters including SS screws cost of materials, labour etc., complete as per specifications of architects details. Make: GODREJ or Equivalent

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Handles 200mm Ground Floor

•

Terrace Floor

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Door stopper 75mm Ground Floor

•

Terrace Floor

•

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90mm Ground Floor

•

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90mm Terrace Floor

•

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 200x10mm Ground Floor

•

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 200x10mm Terrace Floor

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Aldrop 16mm dia, 200mm Ground Floor

•

Providing and Fixing Holdfast of size 260mm x 25mm x 5mm

•

Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terraceor Chajjasor Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400 Percentage and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats at 1.6 kgor m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer at 150 gor m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. Terrace Floor

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine san including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Terrace Floor

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The graniteor trapor basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Terrace Floor

•

Polyurethane based water proofing for Retaining Wall Providing and laying water proofing treatment to the Retaining wall area with PU Elastomeric Single component liquid applied, cold applied, moisture cured high tensile elastomeric PU waterproofing membrane having elongation of more than 400 Percentage and having solid content of above 90 Percentage at 1.6kgor m2 in 2 coats to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer at 150 gor m2. The cost is inclusive of surface preparation, crack filling, repair of loose mortar etc. completely as per specification.

•

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse san laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cat Eye, River Pink or equivalent.

•

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse san laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. Ground Floor

•

Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. Ground Floor

•

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 Percentage and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse san, jointing with grey cement slurry at 3.3 kgor m2 including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm

•

Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed at 2 L per 50 kg of cement or as per direction of Engineer incharge.

•

Providing Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement :3 coarse san, finished with a floating coat of neat cement. 15 mm thick

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse san, Jointing with grey cement slurry at 3.3 kgor m2 including pointing the joints with white cement and matching pigment etc., complete. Ground Floor

•

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Ground Floor

•

Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. Ground Floor

•

Providing and fixing of clay tiles for cladding tiles of size 230x75x10mm thick on 12mm thick cement mortar 1:3 (1 cement : 3 coarse san & jointed with Adhesiveor cement slurry over rough plaster surface excluding cost of rough plastered surface and the surface is painted with red apex paint and black apex paint into the groves. The work includes cost of all materials, labour charges for all items of work, usage charges for equipment, etc., complete as per specification. Ground Floor

•

Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite, black granite in CM 1:3 (1 cement : 3 coarse san proportion cut to required shape, pattern with paper joints, finished with cement mortal using white cement and colour pigments to match the colour of slab making through jointing with sealant, making holes 25mmx12mm grooves in joints including cost of all materials, mortar, labour, curing etc., complete.

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine san including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Internal wall plastering Ground Floor

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse san and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse san finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. External Plastering Ground Floor

•

Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse san finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineerin- charge. Ceiling Plastering Ground Floor

•

Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gor m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. Plaster mesh 100mm wide Ground Floor

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Ground Floor

•

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 gramsor litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge. Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compoun content. With water thinnable cement primer on wall surface having VOC content less than 50 gramsor litre as per specifications and as per directions of Engineer in charge. Ground Floor

•

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work (Two coats applied at 1.43 Lor 10 m² over and including priming coat of exterior primer applied at 2.20 kgor 10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Ground Floor

•

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied at 0.90 ltror 10 m² over an under coat of primer applied at 0.75 ltror 10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Ground Floor

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Ground Floor

•

Providing and laying in position Cement Concrete for all Foundation works. The graniteor trapor basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (Rate is inclusive of Shuttering) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand

•

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Ground Floor

•

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 Percentage) total coated thickness with zinc coating 120 gor m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineerin- charge. The sheet shall be fixed using self drillingor self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontalor vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Ground Floor

•

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 Percentage) total coated thickness, Zinc coating 120 gor m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drillingor self tapping screws complete : Gutter (600 mm over all girth) Ground Floor

•

Concrete, Formwork & reinforcement Providing and laying in position Cement Concrete for levelling course for all works in foundation. The graniteor trapor basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates

•

Providing and laying in position Reinforced cement concrete for all Foundation works. The graniteor trapor basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

•

Addtionalities for Form Work for combined Footing at 8 Percentage

•

Addtionalities for Form Work for retaining wall at 10 Percentage

•

Addtionalities for Form Work for Slab at 50 Percentage

•

UGTor OHT (inside) waterproofing with Anti-microbial Coating Providing and Applying two component, water-based food grade epoxy resin coating on inside surface of Potable water tank having anti-algae, antifungal, Non-toxic, hygiene cum damp-proof coating Certified by CFTRI as per 21 CFR 175 – 300 of US – FDA, having mixing Ratio (Base: Hardener: Water) – 1:1:1 to be applied at 0.35 Kg per sqm in 2 coats. Ensure that this coating is applied over the protective plaster, and that Item No. 4 is completed across the entire surface prior to applying the protective plaster. The Waterproofing material shall have Specific Gravity: 1.2, Water vapor permeance: 244.48 g per sqm or 24 hrs, as per IS 7809 or Pt 2 or 1977, Adhesion strength: 2 Nor mm2 as per ASTM D 4541: 02. The finished cost to include surface preparation completely as per specification.

•

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine san to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.

•

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The graniteor trapor basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates

•

Supplying and fixing of heavy duty SFRC manhole cover with frame 560MM size for underground tank.Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixing the cover in C.C. 1:2:4 and C.M. 1:3 plastering 20 mm thick to all exposed faces, curing for 10 days with all lead and lift with appurtenances complete Heavy Duty

•

Providing and fixing of PVC Rungs footrest in under ground tanks or manhole using M20 concrete bed blocks for masonry walls or during construction for RCC surfaces, including cost of materials, labour, curing etc., complete as per specifications.

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The graniteor trapor basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates

•

Addtionalities for Form Work for Combined Footing at 3 Percentage

•

Addtionalities for Form Work for Wall at 10 Percentage

•

Addtionalities for Form Work for Roof Beam, Lintel Beam at 60 Percentage

•

Addtionalities for Form Work for Roof Slab at 50 Percentage

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse san including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.

•

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

•

Supplying, filling, spreading &leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineerin- charge.

•

Supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge.

•

Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation of 50 Percentage applied at 1.5 kgor m2 for internal side waterproofing in two layers with waiting period of 4-6 hrs per layer and food grade epoxy coating in two coats certified by CFTRI Mysuru, including surface preparation completely as per specification.

•

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welde FE 410 mild steel screwed and socketedor plain ended casing pipes of required dia, conforming to IS: 4270,of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia having minimum wall thickness 5.00 mm

•

Providing to work spot rolling, lowering and placing in position RCC perforated rings in the already excavated pit including loading and unloading at both the destinations with all lead and lift with appurtenances., complete. 1200 mmx1250 mm

•

Providing and laying 100mm thick pre-cast cover slabs over Road side drains or utility ducts or Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 550 at 6kgor m2, slabs jointed in CM 1:3 proportion and nicely finished Including providing holes in the Cover slabs wherever necessary for easy drainage of surface water including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete.

•

Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fineor mediumor coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineerin- charge.

•

CC PAVEMENT WORK Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. By Manual Means In area of light jungle

•

Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work

•

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2

•

Wet Mix Macadam (Plant Mix Metho Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paveror grader in sub-base or base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

•

Dry Lean Cement Concrete Sub-base Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 14:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 140 kgor m3 , optimum moisture content to be determined during trial length construction, concrete strength not to be less than 7 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a mechanical equipment, compacting with 8-10 t vibratory roller, finishing and curing.

•

Pavement Quality M30 grade Concrete (RM with OPC & GGBS laid using Paver Construction of M30 Grade un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with OPC at 270 kgor m3 and GGBS at 90 kgor m3, coarse and fine aggregate conforming to IS 383:2016, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design transported to site, laid with a paver finisher, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures, curing compound, steel channels, finishing to lines and grades as per drawing.

•

Providing S&S RCC SPUN or VIBRATED CAST PIPES (REINFORCE pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site, rolling and lowering into trenches, laying true to line and level including loading and unloading at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings conforming to IS: 5382 for S&S RCC pipes, with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete. (Contractor will make his own arrangements for procuring water for testing). Before the execution of the work, the contractor shall carry out the survey RCC NP3 Class pipe of 600 mm dia.

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The graniteor trapor basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates

•

Additionalities of Formwork for Wall at 10 Percentage

•

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads at 250 gor m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35:2015.The finished surface to be level, uniform and free from streaks and holes.

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps

•

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover,and cistern fittings, nuts, bolts and gasket etc complete.

•

Providing and fixing CP. Health faucet with flexible hose,CP Bibcock with 2 in 1 connectvity, wall flange, supporting hook with screws, fixing materials and sealant to all sides of wall flange complete. Make :

•

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931

•

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

•

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

•

Supplying , shifting to the place of installation and fixing testing and commissioning of stainless steel soap dish 150 x 150mm including cutting and setting in walls with cement joints and making good the wall. Make : JAQUAR Model No- ACN -1131N

•

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 510x1040 mm bowl depth 250 mm

•

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm Dia

•

Supply and delivery at site special moulded variety 75 mm dia PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments

•

Supply and delivery at site special moulded variety 75 mm dia PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments

•

Supply and delivery at site special moulded variety 75 mm dia PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments

•

Supply and delivery at site special moulded variety 110 mm dia PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments

•

Supply and delivery at site special moulded variety 110mm dia PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments

•

Supply and delivery at site special moulded variety 110 mm dia PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments

•

Providing & fixing, testing and commissioning u PVC multi inlet floor trap 75mm dia conforming to IS 13592 with required P C C support placed to required level as per site condition complete..

•

Supplying and fixing PVC `P' trap 110mm dia, of self cleansing design with or without vent arm complete including cutting and making good the walls and floors.

•

Providing & Fixing in position heavy duty C P grating 125mm dia, with frame of below mentioned sizes including jointing and fixing material complete.

•

Providing and grouting sleeves made in beam/ slab to draw waste and soil lines at all floor level of the below mentioned sizes , including condcting water ponding test to ensure zero leakage with all leads and lifts complete Size : 150 mm dia

•

Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete,As per direction of engineer in charge Concealed work including cutting chases and good the walls etc. 20 mm dia pipe nominal OD pipes

•

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20mm nominal bore

•

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25mm nominal bore

•

Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete As per direction of engineer in charge (external work) 20 mm dia pipe nominal OD pipes

•

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20mm nominal bore

•

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 25mm nominal bore

•

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 32mm nominal bore

•

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 40mm nominal bore

•

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 50mm nominal bore

•

Providing and placing on terrace, polyethylene water storage tanks As per IS 12701 Marked with cover and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes But with out fittings and the base support for the tank

•

Supplying & fixing suction `Y'/ pot stainer with MS flange of suitable length fabricated from 16 gauge brass sheet with 3mm slots. 50 mm dia

•

Supply and delivery at site special moulded variety 75 mm dia PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments

•

Supply and delivery at site special moulded variety 75 mm dia PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments

•

Supply and delivery at site special moulded variety 75 mm dia PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments

•

Supply and delivery at site special moulded variety 110 mm dia PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments

•

Supply and delivery at site special moulded variety 110mm dia PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments

•

Supply and delivery at site special moulded variety 110 mm dia PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments

•

Supply and delivery at site special moulded variety 160 mm dia PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments

•

Supply and delivery at site special moulded variety 160mm dia PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments

•

Supply and delivery at site special moulded variety 160 mm dia PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments

•

Providing And fixing Square mouth stone ware gully trap SP-1 Complete With CI Grating Brick Masonry Chamber 100x100mm Size P trap With Non modular common burnt bricks of designation 3.5, with water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 KG, and frame to be not less than 2.70Kg as per the standard design

•

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay (non modular) bricks of class designation 3.5

•

DOMESTIC WATER TRANSFAR PUMP Supplying, installing, testing and commissioning of submersible / Mono blockelectrical driven pump 1set . (1 working & standby) domestic water pumps for pumping domestic water from U.G. sump to over head water tank, with all necessary arrangements to operate on 3HP 50 HZ, 440V AC supply fitted on a common base frame accessories to lift the pump during maintenance , necessary power connections, the supplier shall include the control panel and wiring from TPN switch to control panel and wiring upto pumps, the control panel comprising of O/L relays, single phase preventor,separate overload trip and relayset, ON/OFF/TRIP indicating lamps,start/stop push buttons, With liquid level controlers, etc., complete as complete. Duty of the Pump 4 cum per hour at 20 TO 25 m head Make : Kirloskar/ suguna/texmo/CRI two set industrial type electronic automatic liquid level controllers, with stainless steel probes / sensors.

•

Providing and fixing gun metal non- return valve of approved quality (screwed end) 32 mm nominal bore Vertical

•

Providing and fixing gun metal non- return valve of approved quality (screwed end) 40 mm nominal bore Vertical

•

Construction of brick masonry catch basin chamber chambers of internal clear dimension as mentioned below by using first class table moulded modular bricks 230 mm thick wall in cement mortor joints in 1:4, over CC 1:4:8 bed 150 mm thick including Supplying precast RCC perforated top slab in 1:2:4 Mix (1 cement: 2 coarse coarse sand: 8 graded stone aggregate), with angle iron frame, inside plastering15mm thick with CM 1:3 (1 cement::3 fine sand) finished very smooth with floating coat of neat cement & making benching and channelling in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 gradedstone aggregate) neatly finished complete as per standard design and as per drawing and specifications.Inside size of 600 x 600mm & depth not exceeding 600 x 600mm including Supplying 450 x 450mm RCC cover with MS L angle frame.

•

Supply and fixing 600mm long puddle flange consisting of 6mm thick welded MS plate, flanges of sutible size property fixed in walls of water tanks as per specifications and approved drawings of following diameters. 32mm dia

•

HT ELECTRICAL WORKS Supply of Running Single Circuit 11 kV, 3 Phase Power Line On 9 Mtr Supports with an Average Span Of 40 Mtr Using RABBIT ACSR Conductor RCC Pole - 9 Mtr Long, 145 Kg WL

•

Supply of Running Single Circuit 11 kV, 3 Phase Power Line On 9 Mtr Supports with an Average Span Of 40 Mtr Using RABBIT ACSR Conductor PSCC Pole - 9 Mtr Long, 200 Kg WL

•

11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL

•

11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for PSCC Pole - 9 Mtr Long, 200 Kg WL

•

DP Structure with RCC Pole - 9 Mtr Long, 145 Kg WL

•

11 kV, 5 KN Polymeric Pin Insulator (24 mm Dia FRP Rod)

•

11 kV, 45 KN Polymeric Insulator

•

Guy Set Complete with No. 15 Strain Insulator & Concreting materials

•

Rabbit ACSR Conductor with stringing

•

PG Clamps for Rabbit Conductor

•

Spiral Earth Electrode

•

EG Stirrups with GI wire lacing 2 nos

•

Caution/Danger Board

•

Anti Climbing Device (12 Mtr GI Barbed Wire)

•

Erection of Running Single Circuit 11 kV, 3 Phase Power Line On 9 Mtr Supports with an Average Span Of 40 Mtr Using RABBIT ACSR Conductor RCC Pole - 9 Mtr Long, 145 Kg WL

•

Erection of Running Single Circuit 11 kV, 3 Phase Power Line On 9 Mtr Supports with an Average Span Of 40 Mtr Using RABBIT ACSR Conductor PSCC Pole - 9 Mtr Long, 200 Kg WL

•

11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL

•

11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for PSCC Pole - 9 Mtr Long, 200 Kg WL

•

DP Structure with RCC Pole - 9 Mtr Long, 145 Kg WL

•

11 kV, 5 KN Polymeric Pin Insulator (24 mm Dia FRP Rod)

•

11 kV, 45 KN Polymeric Insulator

•

Guy Set Complete with No. 15 Strain Insulator & Concreting materials

•

Rabbit ACSR Conductor with stringing

•

PG Clamps for Rabbit Conductor

•

Spiral Earth Electrode

•

EG Stirrups with GI wire lacing 2 nos

•

Caution/Danger Board

•

Anti Climbing Device (12 Mtr GI Barbed Wire)

•

Erection of Base concreting 1:4:8, 650x650x150mm.

•

Pole conctreting 1:2:4, 650x650x1700mm

•

Providing coping for poles with 1:2:4 and as per actuals, 150mm around pole for an height of 300mm

•

PROPOSED DP STRUCTURE AT PROPOSED TRANSFORMER RCC D.P structure using 9 mtrs RCC Pole with WL 145 kg

•

11 kV, 45 KN Polymeric Insulator

•

NO 15 strain insulator

•

Caution danger board

•

11 kV 200 A Single Break GOS

•

H Frame for mounting GOS

•

Spiral earth electrode

•

DOLO Cut Out

•

11 kV, Solid Core HG Fuse Unit

•

Lightning Arrester 10 kV, 5 kA Polymeric Type with Ground disconnector

•

11 kV, 5 KN Polymeric Pin Insulator (24 mm Dia FRP Rod)

•

LABOUR CHARGES Errection of 9Mtrs Long RCC DP Structure

•

Fixing of Guy set with Break insulators, turn buckle and anchor rod

•

Fixing danger board

•

fixing of GOS including wiring (11 kV Single Break 200 Amps)

•

Errection of H Frame for mounting GOS

•

Fixing of Spiral earth electrode

•

Fixing of DOLO Cutouts

•

Providing concrete cement to poles with materials and labour cost including curing etc. Base concreting 1:4:8, 650x650x150mm.

•

b) Pole conctreting 1:2:4, 650x650x1700mm

•

c) Providing coping for poles with 1:2:4 and as per actuals, 150mm around pole for an height of 300mm

•

Supply and making of 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permitivity XLPE Terminations - INDOOR & OUTDOOR JOINTING KIT latest amendments. OUTDOOR TYPE 3Cx95 Sqmm

•

Supply of HT Cable 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975 3Cx95sqmm

•

Labour charges for laying of 11 KV class UG cable in the existing trench GI pipe / stoneware pipe / on wall / on pole as required. On wall / Structure. 3Cx95sqmm

•

Supply & installation of 11KV Load break switch panel.

•

Supply, erection, testing and commissioning of........ KVA 5Star rated aluminum/copper wound Distribution Transformer 11KV/433V with Off circuit Tap change over Switch , Buchholtz relay winding temperature indicator, oil temperature indicator, marshelling box with wiring, oil level indicator with +5% to -15% steps of 1.25%, HT and LT Cable box, stacked core with oil as per IS:1180 (part-1) : 2022 with all standard accessories as per latest IS standard no.2026/1977 and IS :335, technical spcification & ESCOM approved. a) 250KVA Aluminium Wound

•

Supply and fixing of LT Metering Cubicle at Low Tension for 50 KW to 150 KW having specification & design as per the prototype approval (Excluding Meter Cost & Modem Cost)

•

Chain link fencing - Providing chain link fencing 50mm size of 8 guage properly stretched between rectangular poles and fixed with suitable bolts & nuts, the free ends shall be welded to the pole and block pipe at top and bottom as required including cost of all materials, labour, lead and lifts, cutting, bending wherever necessary, wastage and lapping etc., complete as per the direction of the engineer incharge for work including two coats of approved quality paint over one coat of primer paint. Providing and laying in position plain cement concrete of mix 1:3:6 for poles. The rate shall included all rectangular poles, height 2.8 mtrs fixed at a distance of 2 mtrs welded together, etc. with chain link matching gate of 1.5 mtrs wide with hinged & locking arrangements.

•

Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete. Work shall be carried out as per the instructions of Engineerin-charge of works as per the standard procedure.

•

Supplying of two buckets standalong with buckets

•

Supplying of HAND GLOVES

•

Supplying of first aid box

•

Supplying of SAFETY MASK

•

Supplying of FIRST AID CHART with lamination

•

Supplying and installation of RUBBER MAT 1mtx1mt-10mm Thick

•

LT ELECTRICAL WORKS PVC CONDUITS & ITS ACCESSORIES Open conduit System Supplying heavy gauge PVC conduit pipe ……dia....mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesives paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 19/20 mm dia 2mm thick

•

Supplying heavy gauge PVC conduit pipe ……dia....mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesives paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 25mm dia 2mm thick

•

Concealed conduit System Supplying heavy gauge PVC conduit pipe ……mm dia ......mm thick confirming to IS 2509 with suitable size bends, metals/PVC junction boxes, adhesives paste etc., and running before concreting the slab . The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 19/20 mm dia 2mm thick

•

Supplying heavy gauge PVC conduit pipe ……mm dia ......mm thick confirming to IS 2509 with suitable size bends, metals/PVC junction boxes, adhesives paste etc., and running before concreting the slab . The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 19/20 mm dia 2mm thick 25mm dia 2mm thick

•

Supplying heavy gauge PVC conduit pipe……dia.....mm thick with suitable size bends, metal junction boxes, adhesive paste etc. By groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18SWG GI fish wire run throughout the conduit wherever necessary 19/20 mm dia 2mm thick

•

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 200x200x65 mm

•

Supplying and fixing PVC/metal conduit deep junction box. 19/20mm deep junction box

•

Supplying and fixing PVC/metal conduit deep junction box. 25mm deep junction box

•

Supplying and fixing PVC/metal conduit deep junction box. 32mm deep junction box

•

Extra for Groove cutting in brick wall/cc floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing the wall upto wall surface complete. upto 50mm conduit in CC Floor

•

Supplying PVC flexible conduit pipe….mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm..using NF screws and on either end of the pipe terminated completely. 25 mm

•

Supplying and fixing Metal fan box with round hook.

•

Point wiring using copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm (Phase & Neutral) & 1 x1.0Sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS 694: and latest amendments) with out control switch shall be fixed on the existing plastic sheet / gland box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. (For Light, fan point) Short point up to 3Mtr from tapping point to out let via switch box

•

Point wiring using copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm (Phase & Neutral) & 1 x1.0Sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS 694: and latest amendments) with out control switch shall be fixed on the existing plastic sheet / gland box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. (For Light, fan point) Medium point above 3Mtr up to 6Mtrs from tapping point to out let via switch box

•

Point wiring using copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm (Phase & Neutral) & 1 x1.0Sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS 694: and latest amendments) with out control switch shall be fixed on the existing plastic sheet / gland box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. (For Light, fan point) Long point above 6Mtr up to 10Mtr from tapping point to out let via switch box

•

Point wiring using copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm (Phase & Neutral) & 1 x1.0Sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS 694: and latest amendments) with out control switch shall be fixed on the existing plastic sheet / gland box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. (For Light, fan point) Two outlet in a row, above 3Mtr up to 6Mtr from tapping point to out let via switch box

•

Point wiring using copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm (Phase & Neutral) & 1 x1.0Sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS 694: and latest amendments) with out control switch shall be fixed on the existing plastic sheet / gland box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. (For Light, fan point) Three outlet in a row, above 6Mtr up to 10Mtr from tapping point to out let via switches box

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS-694: confirming to latest amendments. The cost should inlcude Crimping lugs and termination. 1.0 sqmm

•

Supplying and Drawing flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor confirming to table 3 class 5 of IS:8130-1984 and (virgin) PVC insulation and sheathed suitable for working voltage upto 1100volts as per IS-694:1990. The cost should inlcude Crimping lugs and termination. 3Cx1.5Sqmm

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-2 Way

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/ metal PVC box. 1 to 2 Module

•

Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293 6 Amps one way

•

Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293 6 Amps Two way

•

Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293 6Amps 3pin socket.

•

Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293 Stepped fan regulator Two module

•

Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293 32A,DP,Switch

•

Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293 16Amps one way switch

•

Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293 6/16Amps universal socket

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Batten holder

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Bell push

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Bell Buzzer

•

CONTROL SWITCH GEARS & ACCESSORIES Supplying push button operated, direct online starter with an antiweld silver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic thermal overload relay help in anticorrosion treated sheet steel or iron clad enclosure and fixing the same to suitable capacity wires for 400/440 volts 3 phase motor/single phase motor upto 5 HP.

•

Supplying and fixing regular MCB distributionpanel confirming to IS 8828 , on wall/wood board/ flush mounting using required clamps, bolts, nuts etc.. With provision for fixing of suitable type capacity ELMCB / MCb's as an incomer for 3 phase double door with necessary bus bar completely wired to use on 440volts 3 phase 4 wired powder coated painting etc.. complete with provision for fixing of single/three phase suitable capacity ELMCB/MCb's as outgoings confirming to IS8828 . 4 way

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 5-32Amps SP

•

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts ,nuts etc., with provision for fixing suitable type capacity MCB'S single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS Enclosure Double Door 4 Way SP & N

•

Supplying, fixing and wiring Residual current circuit breaker (RCC240/450V upto 300mA sensitivity on existing wood/ panel board. 32-40Amps 2 pole

•

Supplying, fixing and wiring Residual current circuit breaker (RCC240/450V upto 300mA sensitivity on existing wood/ panel board. 32-40Amps 4 pole

•

Supplying, fixing and wiring Residual current circuit breaker (RCC240/450V upto 300mA sensitivity on existing wood/ panel board. 63Amps 4 pole

•

Supply and Installation / Fixing / Provision of Pole box with HRC Fuse / MCB provision and suitable connector / terminal for 3 Ph/ 1 Ph connections with Loop-In & Loop- Out terminals for 10 mm2 /25 mm2 3.5 C AI/Ar/Cu/Ar Cable and branch out 2.5 mm2 2 core AI/Cu PVC Insulated cable, enclosed in a Thermoplastic, Polystyrene enclosure, which should be shock proof, safe, IP65(Weather Proof), rust proof, dust proof, water proof having Internally Embedded Gasket with provision for cable entry through IP65 Thermoplastic, polyamide glands and/or grommets 200 mm x 200 mm x 98 mm

•

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron ….and M.S. flat with bolts, washers etc… and painted with 2 coats of red oxide and then two coats of approved paint. 40x40x6

•

Supplying and fixing of metal Socket set of 2 pole and earth plugs and socket for incorporating SP and TP MCB (without MCB). The entire Plug and Socket shall be mounted in athermoplastic / powder coated metal box & wired completely. SP & N 20Amps

•

EARTHING AND L.T. U.G. CABLES Supplying fixing and wiring earth electrode for grounding of DG Sets etc. using 40mm dia 2.9mm thick 2.5mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts.

•

Supplying and running of GI / Copper strips for grounding connections, using necessary fixing materials as required. GI strip 25x3mm

•

Supplying and running of GI / Copper strips for grounding connections, using necessary fixing materials as required. GI strip 25x6mm

•

Supplying and running of GI / Copper strips for grounding connections, using necessary fixing materials as required. CU strip 25x3mm

•

Supplying and running of GI / Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm GI Plate

•

Supplying and running of GI / Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm CU Plate

•

Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc.. 8 SWG GI wire.

•

Supplying, Fixing & proper termination of vertical Air-termination using Gunmetal ball with finials of 5 spikes mounted on 2 mtrs long copper rod, mounted at the highest point of the building, with base plates, connection with horizontal conductor, necessary civil works, etc.

•

Supply & fixing Test Link as per specification & drgs. and grouted to wall at 1200 mm. above ground level complete with all fixing accessories, clamps, screws etc, enclosed in M.S box.

•

Supplying & Fixing Chemical earthing for grounding, conduits, IC cut outs & other equipments backfill compound which is non-corrosive, thermally conductive, potential to permissible limits, superior fault conduction capacity, non toxic, weather resistance & capable of achieving ohmic value less than one ohm. Using 10 ft copper bonded rod with backfill compound

•

Supplying of 1.1KV LT UG Aluminium cable XLPE insulated, PVC extruded inner sheathed, armourd UG LT cable as per the IS - 1554 (part-1) or IS-7098 part-1, Armoring strip thickness in average + 5% and resistivity 14 Ohms/Kms (Max) as per IS -3975. 2 core 10 sq.mm

•

Labour charges for laying of 1.1 KV class UG cable in the existing trench GI pipe / stoneware pipe / on wall / on pole as required. On wall / Structure. 2.5 sqmm to 25 sqmm

•

Labour charges for laying of 1.1 KV class UG cable in the existing trench GI pipe / stoneware pipe / on wall / on pole as required. On wall / Structure. 35 sqmm to 95 sqmm

•

Labour charges for laying of 1.1 KV class UG cable in the existing trench GI pipe / stoneware pipe / on wall / on pole as required. On wall / Structure. 120 sqmm to 240 sqmm

•

Supplying and fixing of heavy duty cable glands suitable for UG cable of1.1 KV class (metal only) 25mm

•

Supplying and fixing of heavy duty cable glands suitable for UG cable of1.1 KV class (metal only) 32mm

•

Supplying and fixing of heavy duty cable glands suitable for UG cable of1.1 KV class (metal only) 40mm

•

Aluminium End Terminal (Lug) 1.5 to 10 sq.mm

•

Aluminium End Terminal (Lug) 16 sq.mm

•

Supplying and termination of Heavy Duty Copper Terminal long barrel. 25 sq.mm Long barrel

•

Supplying and termination of Heavy Duty Copper Terminal long barrel. 50 sq.mm Long barrel

•

Supplying and termination of Heavy Duty Copper Terminal long barrel. 120 sq.mm Long barrel

•

Supplying and fixing 2mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required. 150x50mm

•

Supplying and fixing 2mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required. 300x50mm

•

Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards and Lighting, Using sight Rails and Sign Boards at every 100 Mtr wherever necessary as directed. In soil ( Hard )

•

Providing and filling sand in excavated trench to cover already laid UG cable to a depth of 150mm all-round the cable.

•

FIRE EXTINGUISHERS - Supply & Providing 4.5Kg C02 Gas Type aluminium body Squeeze grip Fire Extinugisher, Trolley Mounted, Easy Weight Management, Used Unused Mechanism, Squeeze Grip, Gross Weight 11.16Kg. empty Weight 6.66Kg. Can Height 860MM Diameter 140MM, Discharge Time less than10 Sees, Controllable discharge mechanism, Applicable on Class 8&C Fire, 8 Rating 138, Can Constuction : Cold Impact Extrusion, Valve Construction : Forging & Machining, Internal Coating of Can : Not Applicable, External coating of Can : Spray Painting, Aluminium metal ISO & PESO Approved, 3 Year Warranty. including cost of materials, labour, usage charges of machinery complete as per specifications. complete.

•

FIXING CHARGES Fixing charges of Post top/gate/garden fitting/LED on the existing CI/GI or any other pipe using required size of reducer, wiring using suitable wires.

•

FIXING CHARGES: Fixing all types and all capacities fluorescent /false ceiling/spot light/CFL/LED fittings indoor on the wall / ceiling / rafters / girders using 23 / 0.00076 " twin twisted PVC insulated wires, required nos of round blocks and clamps. On wall / ceiling / Rafters / Girders

•

Using 2 Mtr long 19mm 18SWG enamelled braised conduit of two nos. rod pendent with ball socket with check nuts all nickel painted.

•

Extra length of GI pipe of class b 19mm dia for down rod.

•

Fixing a ceiling/wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing a 5 amps ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring.

•

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire.

•

LIGHT FIXTURES AND FANS Supplying and fixing of LED Bulkhead of 10W with IP65 protection and IK 08 impact resistance suitable for surface and wall mounting applications.

•

Supplying of 2' feet - LED PVC Square Batten …W with high quality diffuser with life of 25000 burning hours & 70% lumen maintenance with CRI greater than 8. Power Input : 220-240V @ 50 Hz & power factor . 0.9 along with CE approved drivers. 2 years warranty against any manufacturing defect working under standard electrical condition. Led light fitting 2' - 9 / 10 watts

•

Supplying of Surface / recess mounting non integrated type LED down light …W luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, LED of Power / COB with CCT 6500 degree K, CRI greater than70%. efficacy greater than100 lumen per watt, 120degree beam spread, lifegreater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF greater than 0.95, power loss should less than 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit THD Less then 20%, Life as per LM 79, The operating input voltage should be between 130 to 275 volts, BIS Approved and tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 5-6W

•

Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, CRIgreater than 70%. efficacy greater than 100 lumen per W, 120degree beam spread, lifegreater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF greater than 0.95, power loss should less than 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. LED MODULAR DOWN LIGHT 2'x2' 36W

•

FANS Supplying exhaust fan of 1440RPM heavy duty with bracket blades complete for lighting duty suitable to operate on 230V 50Hz, AC supply.. 12" sweep (300mm)

•

Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment, Rated voltage 220 V/ 50 Hz, Rated power input 48 W +/- 10 %, Rated current As per IS:374/79, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value greater than or equal to 4.2 CMM / Watt, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201 , as per IS specification, Motor wdg. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 Volts, Insulation resistance Shall not be less than Two Mega Ohms (2 M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, watt& current , Air Delivery & Fan Speed as per IS:374/1979 with latest amendment, 2 year manufacturer Warranty.. 5 STAR 48" Sweep 5 Star (1200mm)

•

Supplying wall mounting fan suitable to operate at single phase 230v AC supply. 400mm Sweep

•

Supply of LED Street light with pressure die cast aluminum housing body with optimal heat sink for better thermal dissipation. Diffuser with injection moulded & is made of polycarbonate material with high transmission index, delivering supirior light output. Rated life burning Hrs 50000 hr @ lumen maintainence of 70%. CCT greater than 5500K, IP 66 optical and electrical compartment and impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains current should not be greater than 0.1A to 0.7A & surge protection - min 4KV along with over voltage/overload, short circuit/ mis wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal voltage driver to operate wide range from 100v to 270V 50/60Hz application. Overload & short circuit protection ensures reliable operation in spite of problem in output side. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to enxsure ease of maintainence at the sight site location with minimized minimal tools. LED Light fixture with .........W system power consumption. LEd efficiency greater than 130ml/w at 1w and fixture efficiency greater than 75ml/w with CRI greater than 75. luminaire Manufacturer should have inhouse facility accredited by NABL/CPRI & any government certified agency & design & development facility certified by ISO 9001:2008. Housing with supplier word mark/name shall be engraved / embassing on the die cast housing / body part. 2 years warranty against any manufacturing defect working under standard electrical condition as mentioined above should be given by LED source manufacture. Suitable for B1/B2 roads as per IS 1944 Part 1 & Part II. LED Street light 70W

•

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT greater than 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ....... W System Power consumption. LED Efficiencygreater than 1301m/w, nominal CRI greater than75. Luminaire manufacturer should have in- house facility accredited by NABL / CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark / name shall be Engraved / Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Floodlight 200W

•

Spply of LED Bollard light fitting of … W with pressure die cast aluminium housing body fir optimal theraml dissipation. Lamp compartment comprising of anti glare clear diffuser with injection moulded polycarbonate / clear glass material, delivering superior light output. Rated life burning Hrs 50000 hr @ Lumen Maintainance of 70%, CCT greater than 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power factor greater than 0.9 with mains, surge protection- Min 5KV along with Over voltage / Over load, Short circuit / miss - wiring protection. Universal voltage Driver to operate wide voltage range from 100V to 270V 50/60HZ application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS.UL approved MCPCB, wtih 2 years warranty against any manufacturing defect working under standard electrical condition. 8-15W 1000mm Height

•

Fabricating, supplying and erection of… Mtrs long hot dip Galvanized Conical Pole with BSEN 10025 grade S355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, bakellite sheet and MCb's as per IS specifications suitable to withstand the wind speed of 47m/sec for ...Mtrs pole single section and single joint welded as per IS 9595/IS 10178AWS having dimensions bottom ...mm, top ...mm with 3mm thick, suitable base plate and 4 Nos of ....long j bolts along with template and the pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTN-A123 and 153 etc... (Including foundation) as per drawing appended. 7meters - Top 75mm and Bottom 145mm dia.

•

Supplying and fixing of Hot Dip Galvanized M.S Bracket suitable for out door luminairs and mounted on octoganal pole using necessary bolts, nuts etc…. Complete Single Arm Bracket with 1000mm Standard 40/50MM dia.

•

LT PANEL WORKS: Design, manufacture, supplying, fixing in position, testing and commissioning of following MV switchgear panels made up of 14G, suitable for 415 V, 3 phase, 4 wire, 50 Hz power distribution system. The incoming and outgoing feeders shall be accommodated in a modular multitier arrangement and shall be interlocked to avoid paralleling, adequate size cable alley, painting, earthing, numbering, danger plate etc. as required as per specifications and drawings. The panels should be with all items as per SLD and Specification. Fabricating supplying and mounting MS box made out … SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint and Powder coating. etc., complete. 14SWG

•

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron… and M S flat …….. With bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 50x50x6mm

•

Supply of on load change over switches 4 poles, AC-23A duty, 415v, 50Hz, AC supply. (Open Execution) 200Amps

•

Supply and fixing Moulded Case Circuit Breaker (MCCover the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of overload and short circuit with thermal magnetic/micro processor releases and earth fault as per IS-13947. (Icu=Ics). In 4P MCCB, all poles should have protection for short -circuit/over load. For Microprocessor MCCBS Facility for segregating priority and Non -Priority load must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. THREE POLE 63-100Amps 25kA

•

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220V AC, 50Hz 12/24V DC.

•

Supplying, fixing and wiring 3 phase Digit Digital Ammeter/Voltmeter

•

Supplying, fixing and wiring 50/5A to 400/5A 5VA burden current transformer class 0.5 accuracy with Tape wound

•

Supplying of multi function Meter digital three line back light LCD type display of voltage, Current, frequency, Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required wit communication Port and class 0.5s accuracy.

•

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50Hz AC with latest microcontroller based, digital read out of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail / flush mounting panel board.

•

Supplying …….amps rated 3 phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M S flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 100Amps 5x30x6mm Aluminum Strips.

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60899 6-32 Amps SP

•

Supply and fixing of 4 pole contactor with No/NC contacts on existing wood/ panel board using necessary bolts, nitsm washers and wiring etc, complete with AC-3 rating and as per IS- 13947 25Amps

•

Supply and fixing of 4 pole contactor with No/NC contacts on existing wood/ panel board using necessary bolts, nitsm washers and wiring etc, complete with AC-3 rating and as per IS- 13947 40Amps

•

Supplying, fixing and wiring heavy duty low voltage capacitors confirming to IS 2834. 3 phase, 400/440 volts grade, for power factor improvement of rotating machinery.

•

Supplying, erecting, testing and commissioning of ON-LINE UPS System suitable for operation on 230V Input and 230V, Output, 50Hz, A/C supply with Isolation Transformer all accessories complete and excluding batteries and wiring complete. 5 KVA ONLINE UPS

•

Supplying installation testing and commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. sealed maintenance free batteries. (2HOURS BACKUP FOR ABOVE UPS) 80 AH Capacity

•

Supplying, erection, testing & commissioning of AMF Panel for ..... kVA DG Set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, aluminium bus bar with the accommadation for ……amps 4 pole contactor for alternator with thermal O/L relay,....Amps 4 pole contactor for mains, MCCB / ACB for short circuit protection, Microprocessor based AMF module with supply failure timer, Restoration timer, 3 impulse automatic engine start/stop logic, Mains/generator voltage, ....capacity bypass switch and frequency sensing, PCC 1301 controller with water temperature/Lube oil pressure/engine speed, Voltage/ampere/Frequency/KVA, Running-hour count, No of starts, Fault indication, over/under speed, fails to start, low oil pressure, high engine temperature, under/over voltage, over current, earth fault relay, with indications for mains on, load on mains, battery charger on push buttons AMF module by pass mode, Battery charger unit with inbuilt Auto/Manual and Flat/Boost facility.The complete set shall have sufficient safety and adhere to NEC, NBC 2016, IEC, CPWD specifications, PCB norms and KSGEI Acts and Rules. 125 KVA

•

Laboratory Table Providing and fixing 4 meter LengthLaboratory Table with frame of approved make consisting of MS Powder coated necessary frame work with Epoxy coated CRCA material storage cabins with hinges and handles for opening. The table top provided with polished granite and storage tray at the intermediate and along the length of table for keeping materials including cost of material, fixtures, labour, complete as per specifications, drawings and as directed by Engineer in charge

•

Laboratory Chair Providing and Supplying Laboratory chair of approved make consists of Polypropelene seat material and MS Powder coated frame Complete including cost of material, transportation, Etc.

•

Conference Table Providing and fixing conference table consisting of 19 mm double thick Ply table top edge bounded with 6 mm thick CORIAN top finish at top area and at sides with 45mm depth corian finish, 19 mm double thick Ply with edge bonded End table with 2 mm Acrylic laminate finish on Exposed area of table at both side, Vertical supports underneath the top table (for Inside compartments) with 19 mm thick ply and 0.8mm thick laminate Finish. LED Cove lighting for table length. Each individual provided with mic arrangements (Audio Visual works) on table top with hidden wiring. Hardware- Minifix assembly and screw leg., as per specifications, drawings and as directed by instructions Main chair table dimensions: 1.8m X 1.0m X 0.75m Sub chair Table dimensions- 2 sides- 4.5m X 0.75m X 0.75m Make: Approved

•

EXECUTIVE CABIN TABLE Providing, Supplying and Placing of Senate Executive Table consisting of Main Desk:2000mmL X 800mmD X780mmH PLB MDF Table top with Side tableor Storage unit:1010mmL X 500mmD X 652mm H.The Main Table top is 50mm thick Pre-laminate MDF board finished with 2mm PVC Edge Banding, supported on MS Powder Coated Brackets and cross beams,25mm thick pre‐laminated MDF gable end or Main table desk is Supported on Side storage unit and other side 3 drawer Pdestal, Pedestal Configuaration and usign Laminate board. Modesty panel is 18mm Thick pre-laminated MDF of 450mm H. The Wire Management system consists of 1 No. of 450mm Aluminium Flip Up and provision to mount swicthes and sockets on metal cable Dump and vertebra considered for wire uptake from floor to cable dump & Side Storage : (Open Shelf + Openable Shutter) is made out of 18mm thick pre-laminated MDF boards. The shelves are made out of 18mm(MDF), which are adjustable in height. The shutters are made out of 18mm(MDF), and fitted by hinges. Finger groove handles, locking unit and levelers are considered. The rate is inclusive of material, labour, fixtures, installations and complete as per specification and directions of engineer in charge Make: Featherlite or Equivalent

•

Officers Tables Providing and installing Cabin Table consisting of 25mm thick Pre laminate particle board table top with 2mm PVC edge lipping on all exposed edges with MS powder coated end support legs, 450mm Ht Modesty Panel with 18mm thk pre lam board with 2mm PVC edge lipping, Wire Management with 65mm Dia Wire Manager Grommetor Flip up with 150mm height dump for apple adapter, complete as per specifications, drawings and as directed by Engineer in charge Main Table size : 1800mmL X 900mmW X750mmH Side Table size: 900mmL X 450mmW X 750mmH Make:Featherlite(Edge)

•

EXECUTIVE CHAIR Supplying High Back Mesh Chair with Dynaflex Back Support to Provide Dual Frame Flexibility & Multilock Mechanism having size of 660mm(L)x660mm(W)x1255mm(H) with Fabric Upholstered Cushion Seat, IS 20D Mesh back, height adjustable headrest and cushion arms, Multilock Mechanism, Dynaflex System, Nylon Base, with Pnuematic height adjustable system with wheel rollers complete as per specification. Make: Featherlite Liberate or Equivalent

•

CABIN CHAIR Supplying High Back Mesh chair of size 660mm(L)x660mm(W)x1050mm(H) with cushion seat and mesh back with Height adjustable arm rests and chrome plated metal base with Pnuematic height adjustable system with wheel rollers complete as per specification. Make: Featherlite Astro or Equivalent

•

MEDIUM BACK CHAIR Supplying Medium Back Mesh Chair with Adjustable Arms of size 585mm(L)x585mm(W)x1015mm(H) with One Way Height Adjustable Arms with soft PU Padding, AN 70 Mesh for Breathability Fabric Upholstered Cushion Seat, Adjustable Tension Knob, Ergonomic Design, Nylon Base and Castors, Pnuematic height adjustable system with wheel rollers complete as per specification. Make: Featherlite Comet or Equivalent

•

COMPUTER TABLE Providing and supplying of approved make Computer table Made of Superior 25MM & 18MM PreLaminated Particle Board with simple look and elegant design. One Drawer & Cupboard offers ample storage for keeping files, books, documents. Designated space for CPU and Keyboard, Superior Lock provided for Secure storage, Functional Table offering a simple and practical work surface for multi-functional uses, PreLaminated Particle Board Top of 25MM & 18MM with 2MM Edge banding on all sides, Bush under the leg avoid scratches to your floor Complete as per Specification and approved Design

•

Cupboard Providing and fixing storage unit made out of 19mm thick Approved commercial ply for shutters, sides, bottom, Compartments and Drawers finished with Acrylic laminate (Approved make and shade) of 2 mm thick at external surface and 0.8 mm thick at internal surface of storage unit. 6mm thick Commercial ply back for Wall side. Shutters and Drawers provided with approved aluminium channels, SS handles, Soft closing Hinges, Lock arrangements, etc., complete the rate includes cost of all materials, labour charges, complete as per specification. Breadth-1.2m X Depth - 0.6m X 2.1 m Height

•

Providing and Supplying approved make Stand Fan consists of matt finish material with plastic blades with adjustable height and Anti rust body complete as per specification

•

Providing and Supplying All-in-One 35W Desktop consists of i3 14100T (4 cores, up to 4.4GHz) operating system - Windows 11 Pro, Integrated Graphics memory of 8 GB: 1 x 8 GB, DDR5, up to 4800 MTor s, non-ECC, hard drive 256GB SSD TLC, 35W N-1 CPU, Non-touch, FHD HDR Camera, 23.8", Non-Touch FHD 100Hz Display Make: Dell Pro 24 All-in-One QC24251,

•

Printer with Xerox Providing and Supplying Approved make Printer with Xerox consists of Print, copy, scan, fax Print speed up to 25 ppm (black) and 20 ppm (color) USB, Apple AirPrint™, Ethernet, Wi-Fi, Duty cycle (monthly, A4) Up to 30,000 pages Recommended monthly page volume, Up to 2000 Target user and print volume, Prints up to 2,000 pagesor month, For teams up to 5 users, 2 standard Paper trays, colour Prints, Wireless; Automatic document feeder; Two-sided printing; Two-sided scanning; Fax; Front USB flash drive port; Touchscreen; Smart Advance Scan Complete as per Specification

•

Providing and Supplying approved make bar coding machine and Software as per instructions of engineer in charge

•

Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work

•

Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead

•

Granular Sub-Base Plant Mix Method Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 For Grading -I Material

•

Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kgor m2 using mechanical means.

•

Bituminous Macadam Grading - I for traffic less than 20 MSA Providing and laying Bituminous Macadam with 40or 60 tph capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 at 3.3 Percentage by weight of mix, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction

•

Providing and laying Semi Dense Bituminous Concrete with 40or 60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 at 5 Percentage by weight of mix and filler, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per MoRTH V revision.

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The graniteor trapor basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates

•

Additionalities of Formwork for Wall at 10 Percentage

•

Providing and constructing "WIRE CUT BRICK MACHINEHOLE CHAMBERS" using Portlandor Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15M alround the chamber. Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster thickness shall be 20mm. Slope inside to be 1:6 in the concrete towards central drain and finished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mm and down size. Providing and fixing SFRC Machinehole frame and cover (Heavy Duty) conforming to IS:12592 with latest amendment, in CC 1:2:4. Providing and fixing footsteps made of 12mm dia. steel bars (Fe-500) with 3mm thick plastic encapsulation (IS-10910). The footsteps shall be fixed 30cms apart and on CC block embeded to masonry wall. The whole works include watering, curing, barricading, danger lighting, pouring tar over MH frame and cover, cost of tar, shoring, strutting, de-watering, engraving Machinehole number with flow direction on the inner conical surface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc. for 1.2mm dia: Constructing Brick Masonry Circular Machinehole 1.2 m internal dia. , 1.5M depth & SFRC cover & frame

•

Concrete, Formwork and reinforcement Providing and laying in position Cement Concrete for levelling course for all works in foundation. The graniteor trapor basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m height. The graniteor trapor basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead and lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

•

Additionalities of Formwork for Drainage at 35 Percentage

•

Providing 150mm dia core cutting on concrete wall to drain out water including cost of equipments, labour and complete as per instructions

•

Kerb Stones Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. 600 x 300 x 150 mm Kerb Stone

•

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

•

TOTAL AMOUNT

•

Provision towards SR Variation at 3% on Part-A (on Civil works and Road Works)

•

Provision towards DPR Preperation / Architectural Fees @ 1.36% of A

•

Provision towards PMC charges / Third Party Inspection at 1%

•

SUB TOTAL (A+B+C+D)

•

Add GST @ 18% on Estimated amount (18% on E)

•

Miscellaneous / Round up

•

TOTAL AMOUNT (E+F+G)

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

MDP.pdf

Others - MDP Circular • 2.15 MB

TN-258.doc

Others - Tender Notification • 0.13 MB

gene bank - uhs bagalkote-15-11-25.pdf

Others - Drawing • 4.39 MB

Gene Bank_UHS_Bagalakot Estimate - UPLOAD.xlsx

Others - Estimate • 0.74 MB

KW 4 Gene Bank and Other Infrastructure Facilities at UHSB.docx

Others - KW-4 • 0.24 MB

Ready to Participate?

Download all tender documents and submit your bid

Construction of Gene Bank and Other Infrastructure Facilities at University of Horticulture Sciences, Bagalkot (Including Road Work)

Market Intelligence

Tender Inviting Organisation

Work Description

Tender Information

Documents Required

Eligibility Criteria

Technical Criteria

Fee & Financial Details

Important Dates

BOQ Preview

Documents

NIT Documents

Ready to Participate?