12/EUDC-MAHA./2025-26

Amount

Safe Loading, carriage & unloading of following material from Central store and JE store to work site.

ST Pole 11 Mtr long

11/0.4KV 250 KVA T/F

11/0.4KV 400 KVA T/F

11/0.4KV 630 KVA T/F

LT XLPE AL Cable 3.5x400/1x630/400/240 sqmm

11KV XLPE Cable 3x185sqmm

ACSR Weasel Conductor.

11 KV Pin Insulator with pin

11KV Disc Insulator

11 KV O/D Jointing kit 3x120/185sqmm

11KV PIN (Polymer) Insulator

ABC Cable 3x120/95/50/25sqmm.

Safe Loading carriage & unloading of following material from Dump site to pit site.

Fabrication erection of substation type double pole on ST pole 11Mtr along with fixing of necessary clamp, accessories required of MS channel on top dropper with arrangement of fixing of 3 Nos pin insulator as per RESPO specification & direction of E/I.

Providing, fabrication and fixing of 11 KV DO Fuse Set.

Providing, fabrication and fixing of 11 TPMO Set.

Laying of 11 KV XLPE Cable 3x185 Sqmm in pukka road Single circuit by Drilling method. Only cable shall be supplied by the department.

Erection and commissioning of AB Conductor of size 3x120/95/50/25sqmm.

Laying of LT Cable 1x240/400 sqmm with suitable size of Al lug. All material provided by department. Except Alu. Lugs

Hoisting of LT Cable on pole, proper clamping on pole. only cable provided by department

Construction of T/F plinth of size 2x2x1.5 Mtr with first class bricks and masonry work in the ratio 1:4cement and course sand fiiling of structure completely as per norms with RCC Top 1:2:2 cement sand and course sand stone gritt with MS bar and MS chaanel for resting of T/F.All material provide by contractor except T/F.

Construction of Masonry type Distribution Pillar box with first class brick ballast cement, coarse sand, local sand, brick ballast and MS Round bar of 10 mm dia including supply and mounting of 04 nos. Straight MS Angle 50x50x6x750 mm-3 nos., Henely type tailless fuse units 500 Amps. 650 Volts 3 no. for incoming and other for outgoing, Copper bus bar 4 nos. 1000x50x6 mm with locking arrangement made of 18 SWG BP Sheet (All the material will be arranged by the contractor)

Rectangular wiremess pel fencing of 11/0.4 KV S/S shall be made as per site requirement not exceeding 3 meter height fabrication with 45x45x5 mm angle the frame should also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support the wiremesh. Rectangular welded type wire mess of size 50x25mm made of 12 S.W.G. wiremesh shall be welded all along the periphery of the frame as well as on horizontal runner to give extra strength of welding to wiremesh welded on the frame. Diagonal bracing of all the frame panel will be welded with Ms flat of size 25x3mm to support as per RESPO specification & direction of E/I. The vertical angles shall be grouted 1/6 of its length in ground with 1:2:2 ratio of cement, coarse sand & concrete provision of gate for entry should be provided with pad lock.

Painting of wiremesh fencing with 1 coat of red oxide and 2 coat of Green enamel paint.

Earthing of Pipe type with 60 feet deep boring and providing jindal make pipe "B" class 1.25" dia and GI strip 32x5 6mtr long attached with clamps and GI pipe

Stringing and sagging of 3 Phase 4 wire of 11 KV Line on ACSR weasel Conductor. Only conductor provided by department.

Proper Jumpering of LT Cable on O/H Line

Prepare proper space for construction of plinth

Cable route marker.

Supply and fixing of clamps.

Holding clamp

Crimping Al Lugs 240/400/630 sqmm

Stone pad 300x300x75mm

Alu Lug of long barrel off size

Copper L-Piece 50x225x10mm

Copper L-Piece 62x225x12mm

Danger board complete

Sundry Item

Clamp for LT Toff with Nut bolts.

11KV Disc Fitting

Providing fabrication and fixing of 11 KV DO Fuse set

Providing Fabrication and fixing of 11KV TPMO Set A B Switch with GI pipe and handle.

Grouting binding nuzzling of stay set 16x1800 complete including fixing of necessary clamps accessories All Material provided by contractor.

Ordinary earthing of pole by MS earth Rod 2500 mm long & GI strip of size 40x5 mm as per RESPO Schedule. Earth rod, GI strip, nut bolts shall be provided by the contractor.

Grouting of pole with the help of Cement, Course sand and brick ballast.

Painting of pole by two coat of red oxide and two of Al. Enamel paint. (All material arranged by the contractor)

Safe installation of 11/0.4 KV 250 KVA T/F its connection from 11KV line and LT Line Labour & T&P Provided by contractor.(All the material except transformer will be arranged by the contractor)

Making of 11KV XLPE cable O/D/S.Th. jointing kit

Installation & commissioning of 11/0.4 KV 400 KVA T/F including its connection from 11 KV line and LT line mounting of copper L-Piece providing and fixing of Al crimping Lugs, all material provide by department except nut bolt and copper L-Piece.(All the material except transformer will be arranged by the contractor)

Dismantling of existing 100/250/400 KVA T/F by Opening of all the HT/LT Connection and its safe carriage upto JE Dump store /ESC Daliganj.

Stringing and sagging of 11 KV Line on ACSR weasel Conductor. Only conductor provided by department.

Installation & commissioning of 11/0.4 KV 630 KVA T/F including its connection from 11 KV line and LT line mounting of copper L-Piece providing and fixing of Al crimping Lugs ,all material provide by department except nut bolt and copper L-Piece. (All the material except transformer will be arranged by the contractor)

Chemical type earthing 3 Mtr long backfill compound bentonite its connect by GI Strip 32x5 mm with DP Box and Wiremesh Fencing. All material provided by contractor

HARE KRISHNA ENERGY PROJECTS (BID ID -5525255)

M/S SHAIL ELECTRICALS (BID ID -5528982)