WELCOME MAINT UNDER SMART PERIODICALS JOINERY, PLUMBING AND OTHER CONNECTED REPAIR WORKS INCLUDING REPAIR AND MAINT OF INTERNAL WIRING AN FAN IN OFFICER MD ACCN AND REPAIR TO CLEANING OF SEWAGE LINES, BOUNDARY WALL, FENCING GATE IN SMQS AND OTHER

Amount

M&L preparation of old plastered surfaces of wall including cornices etc by brooming down or steel wire brushing scrapping down smoke soot moulds and efflorescent salt and trading and greasy spots and applying one coat of white wash of any tint by air less spray machine (Machanical means) complete all as specified and directed

All as per item No-1 here in before but one coat of white wash on ceiling complete all as specified and directed

M&L for preparation of old distempered surfaces of wall by washing rubbing down and sanding by mechanical vacume suction sanding machine of old distempered surface of wall including cornices etc and also 1mm thick wall putty by putty machine rubbing, sanding for smooth finish and applying one coat of primer as required and one coat of oil bound distemper (Oil emulsion any tint) any shade on wall by air less spray machine (Machanical means) all as directed. Make:- M/s Asian paint tractor synthetic distemper/ Nerolac beuty smooth finish/Berger beuty clean or equivalent.

M&L for preparation of old plastered surfaces of walls by washing, rubbing down and sanding by mechanical suction sanding machine of distemper and painted surfaces & applying two coats of distemper oil emulsion over a thin layer of wall care putty with putting machines, rubbing sanding for smooth finish any shade complete all as specified and directed Make:- M/s Asian paint tractor synthetic distemper/ Nerolac beuty smooth finish/Berger beuty clean or equivalent.

M&L for preparation of old painted surface of wood or wood based material of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enemel paint complete all as specified Make:- M/s Asian paints Gattu, Nerolac Hi-glass finish, Berger Butterfly or equivalent.

M&L for preparation of old painted steel surface of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed Make:- M/s Asian paints Gattu, Nerolac Hi-glass finish, Berger Butterfly or equivalent.

Preparing old wall surfaces and applying one coat of cement based paint including color pigment as directed by air less spray machine (Machanical means) (Make :- Berger Durocem extra, Asian Paints, Decora, Nerolac or equivalent).

Ditto complete all as per item No-07 here in before but applying two coats of cement base paint, complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls of any description over 10cm width or girth and applying one coats of weather coat any colour complete all as specified and directed (Make:- M/s Asian paints apex ultima/ Berger weather coat long life 10 Nerolac Excel everlast or equivalent).

Taking down cement plaster on brick walls etc including racking out joints, hacking for keys in scrubbing down and washing with water etc complete all as specified and directed

Demolition of brick work or stone/boulder masonary built in cement mortar including all quions, arches, pillers etc but excluding ashlar facings dressed stone work and pre-cast concrete articles complete all as specified and directed

Supply only Integral water proofing compound as specified and directed.

M&L for Brick work with old size fly ash bricks straight or curved on plan exc 6m nean radius and setting in cement mortar (1:6) complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work in cement mortar 1:6 and finished even and smooth without using extra cement Mechanical Means all as specified and directed (Note:- Below 10 Sqm Qty be excuted throuth conventional mathod).

M&L for 15mm thick rendering on other than fair faces of brick work in cement mortar 1:4, Mechanical Means all as specified and directed (Note:- Below 10 Sqm Qty be excuted throuth conventional mathod).

M&L preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed (Make :- Berger Durocem extra, Asian Paints, Decora, Nerolac or equivalent).

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil emulsion distemper Note: Primer and Emulsion to be carried out through air less spray machine (Mechanical Means) M/s Asian paint tractor synthetic distemper/ Nerolac beuty smooth finish/Berger beuty clean or equivalent.

M&L for 15mm thick rendering in patches on fair faces of brick work in cement mortar 1:6 and finished even and smooth without using extra cement area exceeding 1.00 Sqm but n.exc 2.00 Sqm each complete all as specified and directed

Ditto complete all as per item No- 18 here in before but area n.exc 1.00 Sqm each complete all as specified and directed

M&L for writing letters or figures (Block, Roman, Italic or Indian) n.exc 30cm high with thick paint, complete all as specified and directed.

M&L for writing stops, commas, short lines, dashes, hyphens, brackets, etc with thick paint, complete all as specified and directed

Hacking out old broken glass up to 9.50 m height (any thickness size, quality or description) from steel frames, glazed with putty or fixed with beads complete all as specified and directed

S&F 3mm thick plain sheet glass ordinary quality and glazing with oil putty upto 9.50M height in steel shutter in square n.exc 0.50 Sqm in each pane or any steel frame including glazing clips, complete all as specified and directed (Make:- Modi Guord/Saint-Gobin or equivalent).

S&F 3mm thick frosted glass panes and glazing with oil putty & pins/spring pins complete in squares n.exc 0.50 sqm each panes complete all as specified and directed (Make:- Modi Guord/Saint-Gobin or equivalent).

Dismantling of floor hearth and wall tiling incl mortar bedding removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

S&F for non-skid ceramic any coloured and pattern tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.18 sqm n.exc 0.38 sqm, in floor etc over 15mm thick screed bed in CM 1:6 and set and jointed in neat cement slurry and pointed in white cement with pigment to match the coloured cement to match the surface complete all as specified (Make:- M/s Kajaria/Orient Bell/Johnson or equivalent).

S&F for non-skid ceramic any coloured and pattern tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.18 sqm n.exc 0.38 sqm, in verticle surfaces as in skirting and dado set and jointing neat cement slurry, over 10mm thick rendering in cement mortar (1:4) and pointed, in white cement with pigment to match the colour of tiles complete all as specified and directed (Make:- M/s Kajaria/Orient Bell/Johnson or equivalent).

M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.06 Sqm but n. exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6, all as specified and directed (Make:- M/s Kajaria/Orient Bell/Johnson or equivalent).

M&L for glazed ceramic coloured/printed tiles (colour & shade as approved by GE) of size 300 x 450mmx 7-8mm thick in verticle surfaces as in skirting and dado set and jointing neat cement slurry, over 10mm thick rendering in cement mortar (1:4) and pointed, in white cement with pigment to match the colour of tiles complete all as specified and directed (Make:- M/s Kajaria/Orient Bell/Johnson or equivalent).

M&L granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window, cills, cooking plateforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

M&L coloured shade vitrified Ceramic tiles 10 mm thick (square/ rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed (Make:- M/s Somany/Orient Bell/Johnson or equivalent).

M&L coloured vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in wall skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified (Make:- M/s Somany/Orient Bell/Johnson or equivalent).

Refixing shutters of any description n exc 1 sqm each in same opening incl. taking down complete all as specified and directed

All as per item No 33 exc 1.0 Sqm but n. exc 2 Sqm each complete all as specified and directed

S&F in repair Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials where directed complete all as specified or directed

M&L for cement concrete 1:2:4 type B1 (20mm graded aggregate) 40mm thick as in flooring finished cement conc surface even and smooth without using extra cement complete all as specified

M&L for cement concrete (1:2:4) type B0 using (12.5mm graded aggregate) in roof for leveling course complete all as specified and directed

Taking up or down steel tubing and connections, 15mm bore and removing from site complete all as specified and directed.

Taking up or down steel tubing and connections, 20mm bore and removing from site complete all as specified and directed.

Supply and fixing 20 mm nominal outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes SDR 11, having thermal stability for hot & cold water supply, including all Plain CPVC SDR 11 fittings & brass threaded fittings on walls/ceiling or laying in floors,including fixing the pipe with clamps. This includes jointing of pipes & fittings with one step CPVC solvent cement, complete as per direction of Engineer in Charge (Make:- M/s Supreme/Fenolex/Plasto or equivalent).

Supply and fixing 25 mm nominal outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes SDR 11, having thermal stability for hot & cold water supply, including all Plain CPVC SDR 11 fittings & brass threaded fittings on walls/ceiling or laying in floors,including fixing the pipe with clamps. This includes jointing of pipes & fittings with one step CPVC solvent cement, complete as per direction of Engineer in Charge (Make:- M/s Supreme/Fenolex/Plasto or equivalent).

S&F for 18mm thick 650 density of PVC board of one side prelaminated or digital finished and other side plan white colour to make kitchen cabinet shutter/drawaer front shutters complete with and including all fittings as per specifications complete all as specified and directed. Make : Rajshree/Sintex/sunwin/ M/S Kumar Arch Tech Ltd, M/S H2O soultion complete all as specified and directed

S&F for 18mm thick 650 density of PVC board both side plain white colour fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete with and inculding all fittings as per specifications, complete all as specified and directed Make : Rajshree/Sintex/sunwin/ M/S Kumar Arch Tech Ltd, M/S H2O soultion complete all as specified and directed

Complete removal or existing treatment on wall/roof projections including facia cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean free from dust loose paint etc by skilled labour complete all as specified and directed.

Material & Labour for Old plaster surfaces of finishing walls with paint of required shade applying Two or more coats of 100% Premium acrylic emulsion paint of having VOC less than 50 gm/litre and UV resistace as per IS 15489:2004. Alkali & Fungal resistance, dirt resistance exterior paint of required shade (Company Depot tinted) with silicon additives @1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 ltr/ 10 sqm over including 1mm thick wall care putty over Old surfaces complete all as specified and directed. Note: Primer and Emulsion to be carried out through air less spray machine (Mechanical Means) Make:- Asian Paint Apex ultima/Berger weather coat long life 10/Nerolac Excel everlast

Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & getting out in soft/loose soil complete all as specified.

Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil complete all as specified.

Removing excavated soil not. exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified.

Demolition & breaking up drain pipes (Salt glazed ware, AC/PVC or Reinforced concrete) set in CM Internal dia of pipe 150 mm complete all as specified.

M&L for PCC (1:4:8) type D2 bedding to drain pipes of 150mm internal dia including packing under, & haunching against the sides of pipes after they are laid & tested, complete all as specified.

M&L for 150mm dia (Internal) Salt-glazed stoneware drain pipes grade 'A' laid in trenches on concret bed required slope jointed complete all as specified.

M&L for RCC class NP-2 pipe 150mm dia laid in trenches jointed, complete all as specified.

Cutting into existing manholes for connecting new drains pipes of 150mm dia making good to pipe & rendering, cutting out existing benching for & forming branch channel in cement concrete 1:2:4 type B-1 smooth finished,complete all as specified.

M&L for PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate complete all as specified.

M&L for preparation of newly plastered surface of wall and applying three coats of white wash of any tint complete all as specified and directed.

M&L PCC in lintels upto 1.5 m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed type B1 (1:2:4) using 20 mm graded aggregate complete all as specified.

Cleaning of manholes by Mechanical Means of any size depth n.exc 1.50m by taking out sludge and burrying the night soil in pits including excavation and earth work for pits complete all as specified.

Cleaning by Mechanical Means dewatering sludge water from septic tank/soak well through sewage suction truck/tanker of suitable capacity including removing all rubbish slushy water and disposed off out side MOD land complete all as specified and directed by Enge-in-charge. Note:- The size of sewge tanker/truck and depth of sludge in the each load and truck No shall be measured for arriving unit for payment purposes complete all as specified.

Cleaning by Mechanical Means dewatering sludge water from SWTs tank of dia 8.00 mtr to 10.00 mtr and depth 3.00 mtr to 4.50 mtr through diesel pumping set system and crew necessary for excavation burrying the night soil, removing all rubbish slushy water and eashing through fresh water and applying two coat of white washing (inner and outer side) and applying one coat of synthetic enamel paint on grill portion complete all as specified.

Cleaning by Mechanical Meansof sewage line 100mm dia including manholes by taking out all sludge/night soil burried in a pit to out side to distance not less than 100m and covering top of pit with earth layer 25mm thickness all as directed.

All as per item No-61 above but 150mm dia sewage pipe line complete all as specified.

Cleaning by Mechanical Meansof sewage line 100mm dia including manholes by mechenical means taking out all sludge/night soil burried in a pit to out side to distance not less than 100m and covering top of pit with earth layer 25mm thickness all as directed.

All as per item No-63 above but 150mm dia sewage pipe line complete all as specified.

Removal of blockages from Indian type, European type WC, Nahani/floor/gully traps or between manholes complete by rodding and flushing with watering complete to obtain smooth flow of sewage all as specified and directed.

Taking down/dismantling PVC pipes in any length of bore 75/110mm complete all as specified.

S&F PVC (SWR) pipes 110mm bore double socketed in any length with rubber ring joints fixed to walls complete all as specified

S&F PVC (SWR) pipes 110mm bore double socketed in any length with rubber ring joints fixed to walls complete all as specified

All as per item No-68 above but 75mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowls 75mm bore complete all as specified and directed.

S&F in repair 110mm PVC branch pipe singl (equal or un equal) ISI marked and oval access door complete all as specified and directed.

S&F in repair 110mm PVC SWR) bends ISI marked complete all as specified and directed.

S&F Stack clamps purpose made with flat iron and MS round iron stays, including bolts and nuts and securing ends of stays to wall or roof to fix 75/100mm bore CI pipes complete all as specified and directed.

S&F in repair 100mm bore cast iron bends (any radius) ISI marked diminishing pieces to tapers (larger bore measured) with or without ovel access door including cement joints complete all as specified and directed.

All as per item No-74 above but 75mm dia complete all as specified and directed.

S&F in repair 100mm bore cast iron branch pipe singl (equal or un equal) ISI marked ordinary or any inverted (spigot or socket type) or with parallel branches fitted with oval access floor complete all as specified and directed.

All as per item No-76 above but 75mm dia complete all as specified and directed.

S&F in repair 100mm bore cast iron cowl complete all as specified and directed.

S & F in repair fixing WC Orissa pattern of size 580x440 mm white and integral foot rest excluding flushing cistern, including low level incl flush pipe etc. complete as specified and directed Make Cera, hindware, parryware or equivalent.

S & F in repairs vitreous china wash basin, white flat back size 550x440 mm including waste pipe, brackets and cutting for and pinning in ends of brackets or errecting stand but excluding taps, chains and plug.

M & L for plastic water closet seat cover white closed pattern with flat bottom mild steel chromium plated or aluminium hinging device fixed in repair complete all as specified and directed

S & F virteous china wash down water closet pan pedestal pattern, white excluding flushing cistern and flush pipe complete all as specified.

Demolition of re-inforced cement concrete of any description and in any position complete all as specified

Mild steel 6 to 8 mm dia TMT bars as in re-inforcement cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all specified.

Pre-cast re-inforced cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate aas in manhole covers and set in cement mortar (1:4) including form work complete all as specified

Demolition of cement concrete in ground floor, (un-reinforced) paving n.exc 15 cm thick (below or above GL) complete all as specified and directed

M & L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed

M & L for cement concrete 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in channels and drainage for benching complete all as specified and directed

M & L for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement, including forms, moulds, mitered/stoped ends etc. complete all as specified and directed all as specified and directed.

Taking down existing PVC low level flushing cistern including bend, flush pipes etc and M & L for providing 10 ltrs capacity PCV low level flushing cistern including chromium plated brass inlet and outlet conncections, brackets, PVC flush pipe with bend 32 mm dia of suitable length incl making neccessary connections to water supply pipe line jointing to WC all as specified and directed

Taking down caefully switch board complete along with old MS rectangular sunk type box heavy/medium duty of size 8 to 12 module from the existing position along with switches sockets regulators etc by unscrewing from board by disconnecting electric connections without damaging existing circuit and conduit complete and reconnecting all connection after comletion of job with making good the disturbed surface to match the existing one all as specified and directed.

Taking down caefully switch board complete along with old MS rectangular sunk type box heavy/medium duty of size 4 to 6 module from the existing position along with switches sockets regulators etc by unscrewing from board by disconnecting electric connections without damaging existing circuit and conduit complete and reconnecting all connection after comletion of job with making good the disturbed surface to match the existing one all as specified and directed.

Taking down caefully switch board complete along with old MS rectangular sunk type box heavy/medium duty of size 1 to 4 module from the existing position along with switches sockets regulators etc by unscrewing from board by disconnecting electric connections without damaging existing circuit and conduit complete and reconnecting all connection after comletion of job with making good the disturbed surface to match the existing one all as specified and directed.

M&L for modular metal flush boxes and white cover plate with frame of size 6/8 module for mounting modular type switches /socket/fan/ regulator etc Make - Goldmedal/cabtree(havells)/L&T or equivalent

M&L for modular metal flush boxes and white cover plate with frame of size 4 module for mounting modular type switches /socket/fan/ regulator etc.Make - Goldmedal/cabtree(havells)/L&T or equivalent

M&L for modular metal flush boxes and white cover plate with frame of size 3 module for mounting modular type switches /socket/fan/ regulator etc.Make - Goldmedal/cabtree(havells)/L&T or equivalent

M&L for modular metal flush boxes and white cover plate with frame of size 1/2 module for mounting modular type switches /socket/fan/ regulator etc.Make - Goldmedal/cabtree(havells)/L&T or equivalent

Supply and fix in repair modular switch 1 way 6A 1 module type all as directed .Make - Goldmedal/cabtree(havells)/L&T or equivalent

Supply and fix in repair modular switch 1 way 16A 1 module type all as directed. Make - Goldmedal/cabtree(havells)/L&T or equivalent

Supply and fix in repair modular Socket 6A 3 pin combined 2 module all as directed.Make - Goldmedal/cabtree(havells)/L&T or equivalent

Supply and fix in repair modular Socket 16A - 3/5 pin combined 2 module all as directed.Make - Goldmedal/cabtree(havells)/L&T or equivalent

Supply and fix in reapir Modular step type regulator 1 module type all as directed.Make - Goldmedal/cabtree(havells)/L&T or equivalent

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including fitting and fixture and such as as switches, sockets ceiling rose,pendent holders,regulators,light fittings any type removing materials to store in safe custody or for credite etc, and making good the disturbed surface of walls and floors etc as directed.

M & L for point wiring with two single core PVC insulated & PVC unsheathed FRLS-H multistranded copper conductor cable of size 1.5 sqmm 1100 volt grade in and including making good the disturbed surface of wall with colour washing /distempering the surface to match the existing one in non metallic rigid PVC conduit medium grade 2 mm thick medium 20/25 mm dia with all accessories mounting all the surface of wall/ceiling/roof/etc with suitable size of 1 to 8 module metal flush boxes and including modular front cover plate & back plate for mounting modular type switches /socket/fan/ regulator etc including provision of one single core PVC insulated and unsheathed multi stranded copper cable of size 1.5 sqmm 1100 volt grade as earth continuty conductor connected to common earth dolly switch board complete all as specified and directed.Make-Polycab/Finolex/RR kabels/Plaza or equivalent Note:- surface Conduit shall be laid in celing portion only.

All as per item No 104 but one bell point controlled by one 5 Amp bell push complete

All as per item No 105 but point wiring for One 5 Amp socket point controlled by one 5 Amp switch on same board with cable 1.5 sqmm.

All as per item No 106 but point wiring for One 5 Amp socket point controlled by one 5 Amp switch independent board with cable 1.5 sqmm.

All as per item No.107 here-in-before but with two single core PVC insulated & PVC unsheathed FRLS-H copper conductor cable of size 2.5 Sqmm 1100 volts grade and one single core PVC insulated &PVC sheathed multistarnded copper conductor cable of size 2.5 Sqmm 1100 Volts grade as earth continuity conductor including PVC surface / concealed conduict of size 20 to 25 mm with all accessories for 3 pin 15 Amps socket point on independent board complete all as specified and as directed. Make of Cable :- Plaza/Finolex/Polycab/RR or equivalent. Make of PVC conduit :- AKG/ Plaza/ Jindal / Finolex

S&F ceiling Rose, surface, bakelite 65 x50 mm three terminals, AC, 230 Volts complete all as directed.

M&L in repair for submain wiring with two run of single core PVC insulated unsheathed multi stranded copper conductor cable of size 4 Sqmm 1100 volts grade and one run of PVC insulated unsheathed multi standed FRLS-H copper conductor cable of size 4 Sqmm 1100 volts grade as earth continuity conductor drawn through in and including rigid non metallic PVC concealed / surface conduit of suitable size on roof/wall/ceiling including making good the disturbed surfaces of wall etc including taking out old unserviceable burnt/damaged sub main wiring from its existing position complete all as directed by Engr-in-Charge (Note : Two run of single core cable and one run of earth wire will be measured as one length and conduit and its accessories is deemed to be included in the unit rate). Make of Cable :- Plaza/Finolex/Polycab/RR or equivalent. Make of PVC conduit :- AKG/ Plaza/ Jindal / Finolex

M&L in repair for submain wiring with two run of single core PVC insulated unsheathed multi stranded copper FRLS-H conductor cable of size 6 Sqmm 1100 volts grade and one run of PVC insulated unsheathed multi standed copper conductor cable of size 6 Sqmm 1100 volts grade as earth continuity conductor drawn through in and including rigid non metallic PVC concealed / surface conduit of suitable size on roof/wall/ceiling including making good the disturbed surfaces of wall etc including taking out old unserviceable burnt/damaged sub main wiring from its existing position complete all as directed by Engr-in-Charge (Note : Two run of single core cable and one run of earth wire will be measured as one length and conduit and its accessories is deemed to be included in the unit rate). Make of Cable :- Plaza/Finolex/Polycab/RR or equivalent. Make of PVC conduit :- AKG/ Plaza/ Jindal / Finolex

M&L in repair for Submain wiring with 2 single core PVC insulated FRLS-H multistrand copper conductor cable of size 10 Sqmm drawn into and including non metallic heavy duty rigid PVC conduit not less than 25 mm size ISI marked ivory colour (Pressfit or similar brand ) with all conduit fittings / accessories and 1 run single core 10 Sq mm FRLS-H multistrand copper conductor cable as continuous earth wire complete. (Note for submain wiring: 2 run of single core cable and 1 run of earth wire will be measured as one length). Make of Cable :- Plaza/Finolex/Polycab/RR or equivalent. Make of PVC conduit :- AKG/ Plaza/ Jindal / Finolex

Taking down old unserviceable main switches/DB’s up to 100 Amps capacity fixed in wall and making good of all disturbed surfaces as per existing .

S&F sheet metal enclosure for DB’s when MCB to be used single pole and neutral double door, 4 way, AC,240 volt with 200 Amp bus bar rating complete all as directed. Make :- Legrand /indoasian/L&T or equivalent

S&F sheet metal enclosure for DB’s when MCB to be used single pole and neutral double door, 8 way, AC,240 volt with 200 amp bus bar rating complete all as directed.Make :- Legrand /indoasian/L&T or equivalent

S&F sheet metal enclosure for DB’s when MCB to be used single pole and neutral double door, 12 way, AC,240 volt with 200 Amp bus bar rating complete all as directed Make :- Legrand /indoasian/L&T or equivalent

S&F sheet metal enclosure double door (MCB DB) three phase and neutral with 200 Amps rated bus bar TPN, 4 way verticall type, with provision of MCB incommer, AC, 415 Volt complete all as specified & directed.Make :- Legrand /indoasian/L&T or equivalent

S&F sheet metal enclosure double door (MCCB DB) three phase and neutral with 200 Amps rated bus bar VTPN, 4 way vertical type, with provision of MCCB incommer, AC, 415 Volt complete all as specified & directed.Make :- Legrand /indoasian/L&T or equivalent

S&F MCB single pole, 6 to 32 Amps, 240 Volts 50 HZ, 10 KA breaking capacity complete all as directed.Make :- Legrand /indoasian/L&T or equivalent

S&F MCB single pole, 32 to 40 Amps, 240 Volts 50 HZ, 10 KA breaking capacity complete all as directed Make :- Legrand /indoasian/L&T or equivalent

S&F MCB DP 40 to 63 Amps 240 Volts, 50 Hz, 10 KA breaking capacity complete all as directed. Make :- Legrand /indoasian/L&T or equivalent

S&F MCB Four Pole 40 to 63 Amps 415 Volts, 50 Hz, 10 KA breaking capacity complete all as directed Make :- Legrand /indoasian/L&T or equivalent

S&F MCB Four Pole 100 Amps 415 Volts, 50 Hz, 10 KA breaking capacity complete all as directed. Make :- Legrand /indoasian/L&T or equivalent

Supply only LED tube RETRO LED 16 to 22 watt of size 4 ft long complete all as specified & approved by EIC.Make :- Havells cat part No-photon ultra 2.01213T8SSTL18WLED865SPC/Philips/ Bajaj cat part No-T8-112432/ or equivalent

M&L for painting of ceiling fan, exhaust fan,with synthetic enamelled paint by spray painting machine including filling cavities with filler one coat after cleaning all dust etc including writing of MES No complete all as specified and directed.

M&L for rewinding of ceiling fan of size 1200 mm sweep with super enamelled copper winding wire of existing gauge, reassembling the same complete including taking down cleaning and replacement of split pin rubber reel, clamp, check nuts, flexible cord of size 3 core of suitable size including leathe work of shaft complete and refixing the same after repair all as directed

M&L for rewinding of exhaust fan of size upto 300/350 mm sweep with super enamelled copper winding wire of appropriate gauge for any make or model,reassembling and testing including taking down cleaning and replacement of split pin rubber reel, clamp, check nuts, flexible cord of size 3 core of suitable size complete and refixing the same after repair all as directed

M&L for rewinding of exhaust fan of size upto 450 mm sweep with super enamelled copper winding wire of appropriate gauge for any make or model,reassembling and testing including taking down cleaning and replacement of split pin rubber reel, clamp, check nuts, flexible cord of size 3 core of suitable size complete and refixing the same after repair all as directed

Supply & replacement ball bearing No 6201/6202 for ceiling fan/exhaust fan including taking out old & UNSV complete all as specified and approved by EIC. Make- SKF/NBC or equivalent

Supply & replacement of Gun metal bush for ceiling fan/Pedestal an/Air circulator/wall fan etc including dismantling complete all as specified and approved by EIC.

Supply and fix in repair fan blade set suitable for 1200 mm sweep fan with accessories complete all as specified & directed.

M&L for exhaust fan louvers made out of mild steel suitable for exhaust fan of size 300mm sweep including taking down old complete all as specified and approved by EIC.

Supply and fix in repiar capacitor 2.5 mfd complete all as specified and approved by EIC. Make- EPCOS/Havells/M-CAP or equivalent .

Supply and fixing ceiling fan complete with blade down rod and accessories 230 V,1400 mm sweep air delivery 245 cfm complete with brusheless direct current motors all s specified and directed Make-Havells/Philips/Bajaj or equivalent

Supply & fix exhaust fan made of sturdy engineering plastic complete with louvers shutter volt 230 V 50 Hz RPM 1200 copper winding of sweep 200 mm.Havells/Philips/Bajaj or equivalent

M/s A S Associates (BID ID -3159712)

PANKAJ AND BROTHERS (BID ID -3159659)

Tecj Nirmaan (BID ID -3159669)

M/s RAAJSHREE INFRA (BID ID -3150197)

Industrial Traders (BID ID -3160316)

M/S PRATAP BUILDERS (BID ID -3159796)