Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.3 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹7.4 L+₹15,488 (2.12%)Rejected-Finance | L2 | Rejected-Finance Highest Rate Quoted |
Tender Value
₹9 L
EMD Value
₹9,000
Closing Date
29 Jul 2024, 3:00 pmClosed
Executive Officer
Ettimadai town panchayat office
Construction of Septic Tank to the toilet at Ward No.02 Poongagoundenpudur Community Toilet in Ettimadai Town panchayat.
2024_DTP_466001_1
ROC No 252/2023 Dated 22.07.2024
Open Tender
Civil Works
Works
180 days
Ettimadai town panchayat Coimbatore District
As Per Norms
3 documents required · 3 mandatory
₹0
₹9,000
13 Sept 2024
25 Jul 2024
29 Jul 2024
25 Jul 2024
29 Jul 2024
25 Jul 2024
25 Jul 2024 - 29 Jul 2024
Amount
Earth work excavation for foundation in all types of soils and sub soils including soft disintegrated rock and soft rock to the full depth as may be directed except in hard rock requiring blasting, including necessary string, strutting, shuttering, bailing or pumping out sub soil water, removal of slush wherever necessary and also including refilling the sides of foundations with excavated soil in lavers of 15 cm. thick, well rammed and consolidated depositing the surplus earth within the compound in places shown by the departmental officers with all leads and lifts and clearing and leveling the site etc. complete complying with the standard specifications, drawings and as directed by departmental Engineers.
Brick Masonry (one or more bricks thick) in cement mortar 1:5 (one cement and five Crushed Stone sand(M.Sand)) of the following proportions in foundations, basement and superstructure walls using country bricks of size 22cm x 11cm x 5 cm having crushing strength of not less than 70 kg. per square centimeter) complying with standard specifications and drawings and as directed by departmental Engineers.
Plastering in Cement Mortar 1:3 Mix (one Cement, Three sand ) 20mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications
Supplying and erecting in the position of centering for sides and soffits including necessary supports and strutting upto 3.00 m high for plain surfaces with all cross bracings using mild steel sheet of 90 mm x 60 cm and or suitable size stiffened with welded-mild steel angle of size 2mmx25mmx3 mm for boarding laid over silver oax (country wood) joists of size 10 x cm x 6.5 cm spaced at about 90 cm centre to centre and supported by casurina props 10 mm to 13 cm dia spaced at about 75 cm center to center etc. complete complying with standard specifications and as directed the departmental office for RCC slabs, rectangular beams, Tee or Ell beams, Lintels bed blocks, staircase waist slab and landing slab, landing beams canopy etc.
Supplying, Fabricating and placing in position mild steel or deformed steel bars for all reinforced cement concrete items of work including cost of steel transporting straightening cutting, bending, cranking binding welding etc. Including cost of binding wire MS.chairs laps to fix the reinforcement in all positions, all labour and materials complete complying with standard specifications and drawings and as directed by the departmental Engineers.
Supplying and laying reinforced cement concrete of mix 1:1.5:3 (one cement one & half Crushed Stone sand(M.Sand) and three aggregate) using machine crushed hard broken granite stone jelly 20 mm gauge for RCC works in all types of foundation footings rafts, columns floor, beams, slabs of all shapes (excluding cost of providing centering and fabrication of reinforcements which shall be measured and paid under separate items but including curing etc. and including fixing fan clamps or hooks, after laying of Electrical conduct pipes, junction boxes wherever required etc. complete complying with standard specifications and drawings and as directed by departmental Engineers.
Supply of thousand ltr. capacity PVC water tank including cost and conveyance Complete complying with standard specifications and as directed by the departmental Engineers.
Conducting Geophysical Survey Charges including all other charges.
Drilling of 150mm vertical bores in Hard rock areas to the required depth as directed by the TOWN PANCHAYAT Officers including labour charges for inserting casing pipes, assembling in the drilled holes, including welding the joint if necessary grouting the casing pipes etc., and including transportation charges for the rig and supporting vehicles from one place to another. 0 - 150 M
Supply and Delivery Of unplasticised plain PVC 150mm dia casing pipes of the following diameter in 3 metres length with screwed and socket ends and centering guides for every 15 metre length of pipes as per IS 12818/2010 and as amended from time to time to suit deepbore well upto 80m depth (CS) for delivery at site of work with IS marking including loading, unloading freight, transit insurance etc., complete.
Supply and delivery of 7.5HP (50LPMX225 HEAD) THREE PHASE SUBMERSIBLE PUMPSET SUITABLE FOR 15OMM DIA BOREWELL AS PER IS 8034/2002 WithOUT PANEL BOARD Supply and delivery of clear water vertical wet type submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 with latest amendments and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainlesss steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/difuser With ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor asper IS9283 suitable for operation in AC 3 phase 415v+/- 10%,50 HZ +/- 5%
Supply and Delivery of 4 sq.mm PVC Insulated and Sheathed 3 core flat type copper cable confirming to IS 694/1990 including loading and unloading charges etc., complete.
Supply and fixing 50mm of G.I. ( 'B' Class ) pipe including all charges
100 Amps Porcelain fuse unit (500 V) including all charges
5 KVR Capacitor including all charges
63 Amps TPN metal clad switch with rewirable fuse units.including all charges
Supply and fixing of 65 mm GM NRV .including all charges
Labour Charges for erection 7.5 HP Submersible pumpset in borewell/open well including fixing and jointng submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth Values erection clamps pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter,Ammeter,three pilot (indicating ) lamps capcitor single phasing preventor, Water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days
Supply and run of 4x6 sq.mm (84/0.30) PVC insulated SC unsheathed CU.Conductor of 1100 V Grade on 7/20 GI bearer wire for Service connection main.(SD 68)
Supply and run of 4x6 sq.mm (84/0.30) PVC insulated SC unsheathed CU.Conductor of 1100 V Grade in 32mm dia GI pipe (Class ;B') Suitably bent at both ends with Necessary angle iron up right and end supports for main. (SD 73)
Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc. complete. complying with std. specifications.SS 20 B ( for pipe line work )
Supply of 90 mm PVC Pipe, 6 KSC/cm2(3 " pipe) of ISI standard specification inculding all charge extra, complete.
Laying of 90 mm PVC Pipe, 6 KSC/cm2(3 " pipe) Pvc Pipes and specials as per standard specification inculding all labour charges extra.
Refilling the Excavated earth including well Consolidation including cost and conveyance complete complying with standard specifications and as directed by the departmental Engineers.
Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding locking arrangements and labour charges etc.,
DIVYA BUILDERS (BID ID -1095310)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .