Special Repairs to building No P-29 (ORs (institute) and T-08 (Conferene Hall) at Armd Static Workshop P-09 Near Gas Agency (Autp Regt) and P-33 of Officer Tem accn of CHC Auto Regt ACCS in the area of AGE B/R II under GE (N) Ahmednagar

Amount

Dismantling boarding, any description, fixed in any position with nails etc complete all as specified and directed by Engineer-in-Charge

M&L for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing etc complete all as specified and directed by Engineer-in-Charge

M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing etc complete all as specified and directed by Engineer-in-Charge

Material and labour for false ceiling with Vinyle faced Arm-Gyp-FB, ceiling 600 x 600 x 9mm thick with washable metallized polyster foil backing with Vinyle covered edges, supporting sections shall be of suitable size from same makes embossed on sections and level adjuster duly suspended by 2 mm dia GI wire fixed to roof at 600mm centre to centre as per manufacturere's instructions / specification etc complete all as specified and directed by Engineer-in-Charge Make : Armstrong or equivalent in Saint Gobian / Lafarge

Dismantling of stone slab & tiles of any description in floor aprons laid, bedded & pointed in any mortar etc complete all as specified and directed by Engineer-in-Charge

Demolition of cement concrete(un-reinforced) in ground floor & paving n.exc 15 cm thick below or above ground level etc complete all as specified and directed by Engineer-in-Charge

M & L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base of floor 75mm thick etc complete all as specified and directed by Engineer-in-Charge

Material and labour for Non-skid ceramic tiles 8 to 10 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc. set and jointed in neat cement slurry and laid over and including. screedbed 15mm thick in cement and sand mortar (1:6) and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

Material and labour for coloured glazed ceramic tiles digitally printed premium designer series of size exc 0.11 Sqm and n'exc 0.18 Sqm , 7-10 mm thick as approved by GE as in dado/skirting or on vertical surfaces, over and including 10 mm thick backing coat in cement and sand mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

Material and labour for Double charge / vitrified tiles 10mm thick (square / rectangular) , area of each tile exc 0.60 Sqm and not exc 0.72 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over and including 15 cm thick screed bed in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

M&L for 60mm thick, interlocking paver block (set of 4) Rustic Versa Stone Pavers M-35 grade made up with 12.5 mm graded machanically crushed stone aggregate, factory made over and including 30 mm thick sand cushioning and joints filled with fine sand including levelling and sweeping etc complete all as specified and directed by Engineer-in-Charge

Demolation of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete block walling etc complete all as specified and directed by Engineer-in-Charge

M&L precast cement concrete solid block masonry (1:3:6) mix type C-1 using 20mm greaded stone aggregate exceeding 10cm width, built & set in cement and snad mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

Taking down cement plaster on brick/stone walls or ceiling including taking out joints hacking for keys, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge

Material and labour for rendering 15 mm thick on stone/brick / concrete surfaces in cement and sand mortar (1:4) surfaces finished even and fair etc complete all as specified and directed by Engineer-in-Charge

Material and labour for preparation of newly plastered surfaces and applying two coats of OBD over chalk whitening etc complete all as specified and as directed by Engineer-in-Charge

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc., to store and rubbish not exc. 50m built in Cement and sand morter etc complete all as specified and directed by Engineer-in-Charge

M&L for Forming jambs, etc., to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete new work built in Cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

M & L for Plastering 10 mm thick in cement and sand mortar (1:4) using 100% course sand on roof mixed with & including WPL @ 3% by weight of cement and finished the surfaces even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

Material and labour for providing water proofing treatment on roofs, as per manufecturer's instructions and as specified after taking down/out as existing treatment Note. (a) Cleaning the newly plastered surfaces with wire brushes and applying a coat of bituminous primer @ 0.30 ltrs/Sqm with roller and allow to dry. (b) Applying and laying torch APP polymer modified bituminous membrance 3 mm thick with non woven polyster matt as reinforced weighing not less than 3 Kg/Sqm by thermofusion process as per manufacturers specification including applying one coat of aluminium paint. Make : Super Thermolay of STP or equivalent in Texsa India Ltd / IWL Ltd / Tiki Tech

Supply and fix in repairs wash hand basin vitreous China white, flat back type of size 550 X 400 mm pedastal type including pedastal, pillar tap, CP waste chain pillar tap and plug and porcelain stopper, waste pipe, a pair of brackets,or errecting stand and PVC connection etc complete all as specified and directed by Engineer-in-Charge Make :- Cat Part No 10098 of Hindware or equivalent in Parryware / Cera / Jaquar

Supply and fix in repairs PVC valveless, syphonic action type, flushing cistern,low level wtih all accesories etc complete all as specified and directed by Engineer-in-Charge. Make :- Sleek essence series Of Hindware or Cat part No E8303 of Parryware or equivalent in Cera / Jaquar

S&F in repairs grating 100 mm dia of PTMT etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge. Make:- Cat part No MOR 1020 A (Orintal series) of MARC or equivalent in PLUMBER / ESS-ESS / Jaquar

Supply and fixing in repairs stop valve cast copper alloy, fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore etc complete all as specified and directed by Engineer-in-Charge Make:- Cat part No MOR 1320(Orintal series) of MARC or equivalent in PLUMBER / ESS-ESS / Jaquar

Taking down steel tubing and connections in repairs,15 mm bore etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No 27 (here-in-before) but 20mm

S&F of CPVC pipes SDR 11 including all fittings 16mm outer dia fixed to walls /ceiling or laid in trenches incl all necessary fittings etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No 29 (here-in-before) but 20mm dia etc

M&L for Complete removal of existing treatment and applying chalk whiting and two coats of OBD on walls etc complete all as specified and directed by Engineer-in-Charge

M&L for scraping, washing, rubbing down and stopping of distempered and painted surfaces on walls and applying 2 coats of cement paint on walls etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistren etc complete all as specified and directed by Engineer-in-Charge. Make :- Cat Part No C0117 Of Parryware or Cat Part No 20042 of Hindware or equivalent in Cera / Jaquar

Supply and fixed in repairs 110 mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No 34 (here-in-before) but 75 mm dia

Supply and fix in repairs 110 mm bore PVC (SWR) bend, any radius etc complete all as specified and directed by Engineer-in-Charge.

All as per Sl item No 36 (here-in-before) but 75 mm bore.

Supply and fix in repairs PVC (SWR) floor trap, 75 mm dia plain with grating including jointing with slovent cement etc complete all as specified and directed by Engineer-in-Charge

Material and labour 16-18mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in top table, top of WHB, kitchen slab/platform, steps, gate pillars, cills etc or on vertical surfaces including vertical projection, full round moulding the edge laid over screed bed 15mm thick in cement and sand mortar (1:4) jointing , pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite and rubbing polish to achieve mirror finish etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No 39 (here-in-before) but on vertical surfaces

M&L for Machine cut cudappa stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge

Material and labour for Double Charge / ultra charge vitrified tiles 10mm thick (square / rectangular) area of each tile exc 0.18 Sqm and not exc 0.36 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 cm screed bed in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

M&L for heavy duty paver tiles of size 60 cm x 60 cm of thickness 15 to 16 mm full body homogenous METEOR Series of Endura by johanson and stone 16 series of Somany or equivalent in Restile of approved colour, shade and pattern including laying tile with spacer of 3 to 5 mm thick and filling with polymer modified cementation grout (Make Fosroc / Dr Fixit /MAPEI) as per manufacture's instruction including 15 mm thick screed bed in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs vitreous china wash down water closet (Pedestal pattern) white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP aluminium hinges device complete connecting to 'P' or 'S' trap etc complete all as specified and directed by Engineer-in-Charge. Make:-Petite series Cat part No C0287(S)/88(P) Incl seat cover Cat part No E8309 of Parryware or equivalent in Hindware / Cera / Jaquar

Supply and fix in repairs wall mixture , wall mounted with bend and over head shower etc compete all as specified and directed by Engineer-in-Charge Cat Part No MSH 1141 (for mixer) ,MSR 1090 (Over head shower)and MSH 1260 (Shower arm) of MARC OR its equivalent in Plumber / ESS-ESS / Jaquar

Supply and fix in repairs, shower rose with shower arm etc complete all as specified and directed by Engineer-in-Charge Make:- Cat part No MARC MSR1050 (Shower) and MOR 1260 (Shower arm) of MARC or equivalent in make Plumber / ESS-ESS / Jaquar

S&F in repair 20mm dia curtain rod powder coated with decorative bracket as per sample kept in sample room of GE (N) office) etc complete all as specified and directed by Engineer-in-Charge

Supply and fix tubular towel rail, brass chromium plated 20 mm dia `D' type, 60 cm long between flanges including a pair of brackets etc compete all as specified and directed by Engineer-in-Charge. Make:- Cat part No UO911 of PLUMBER or equivalent in MARC / ESS-ESS / Jaquar

Taking down chowkats or frames of size exc 1.5 Sqm but n exc 4.00 sqm with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge

S&F 35 mm thick 2nd class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial plywood. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated etc complete all as specified and directed by Engineer-in-Charge

Supply and fix pressed steel frames of size 105 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed by Engineer-in-Charge

Taking down chowkhats or frames of size n' exc 1.5 sq m Each with shutters (without taking off shutters from the frame) etc complete all as specified and directed by Engineer-in-Charge

S&F steel windows double shutter with side hung shutters incl box/projecting type hinges with steel handles and steel peg stay complete with guard bar and glazing bars dovetailed or welded at any height etc complete all as specified and directed by Engineer-in-Charge Note : Rate quoted is deemed include for scaffolding etc required, upto 7.50 m height.

Supply and fix in repairs rotational moulded polyethylene water storage tanks double layer ISI marked (cylindrical vertical with closed top) of 1000 litres capacity hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to irin pipe and connecting etc complete all as specified and directed by Engineer-in-Charge

S&F 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and directed by Engineer-in-Charge

Material and labour for filling in door frames plain cement concrete (1:2:4) type B0, using 12.5 mm graded stone aggregates etc complete all as specified and directed by Engineer-in-Charge

Supply and fix Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C-21 complete all as specified of size 100 mm etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium anodised barrel tower bolt of extruded section 200 mm long etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium anodised handles of extruded section 150 mm long etc complete all as specified and directed by Engineer-in-Charge

Material and labour for applying two coats of synthetic enamel paint over a coat of pink primer for new wooden surfaces of any description exc 10 cm width or girth including preparation of surfaces and smooth finish with roller etc complete all as specified and directed by Engineer-in-Charge

S&F 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) etc complete all as specified and directed by Engineer-in-Charge

S & F Mild steel 300 mm ordinary rat tail rod pattern springs, including roller plate etc complete all as specified and directed by Engineer-in-Charge

Supply and fix galvanised mild steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified and directed by Engineer-in-Charge

Material and labour for glazing with 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane at any height etc complete all as specified and directed by Engineer-in-Charge

Dismantling Single layer Mangolare pattern or similar tiles in roofing laid in cement and sand morter etc complete all as specified and directed by Engineer-in-Charge

M&L for Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar (1:3) or cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

M&L for PCC (1:2:4) type B0 (12.5 mm graded Stone aggregate) as in roof kerbs of mud stops, rounded or chamfered on edges etc complete all as specified and directed by Engineer-in-Charge

Dismantling Single layer Mangolare pattern or similar tiles in roofing laid dry etc complete all as specified and directed by Engineer-in-Charge

M&L for Roof tiles, Mangolare pattern, interlocking at side joints, laid dry etc complete all as specified and directed by Engineer-in-Charge

All as Sl item No 69 (here-in-before) but except tiles

M&L for applying 3mm thick wall care putty on wall / ceiling etc complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 m in depth and getting out in hard / dense soil etc complete all as specified and directed by Engineer-in-Charge.

Returnig, filling in including spreading, levelling, watering and well ramming in layers, n exc 25 cm thick in soil etc complete all as specified and directed by Engineer-in-Charge.

Removing exacavated soil to a distance n. exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point etc complete all as specified and directed by Engineer-in-Charge.

Supply and spread fine river sand in trenches as cushioning to underground cable on top and bottom of cable etc complete all as specified and directed by Engineer-in-Charge (measurement to be taken after punning down).

M&L for cable protection bricks common burnt clay sub class 'B' designation 75 for protection of UG cable laid in trenches etc complete all as specified and directed by Engineer-in-Charge..

Supply and Lay HDPE pipe 25 mm dia for protection of LT cables etc complete with all accessories etc complete all as specified and directed by Engineer-in-Charge.

Supply and laying of un-reinforced precast concrete cable cover, class LV, Type 1 with peak, size 250mm x 150mm x 40mm complete etc complete all as specified and directed by Engineer-in-Charge.

Taking down U/S Cable & Supply & testing in trenches or fixing on wall or pole XLPE insulated, armoured heavy duty electric cables with stranded aluminium conductor 1100 volts, cross sectional area of 6 Sqmm 2 core etc complete all as specified and directed by Engineer-in-Charge. (Note : Earthwork, PCC Cable covers and GI pipe shall be measured and paid seperately under appropriate item of this BOQ)

Supply and fix FRP junction box of size outside dimensions 333 x 233 x 120 mm of make sintex, Cat No GSJB-3020 including 20mm connector, MCB SP 6 Amps-01 No and fix on pole with and including MS clamps made out of 25 x 3mm MS flat iron, nut, bolts etc, etc complete all as specified and directed by Engineer-in-Charge.

S & F in replacement Acrown shaped post top lantern in soothing moon finish made up of Polycarbonate, suitable upto 27 W retrofit LED Lamp (B-22 base) with LED LAMP 20 W complete including mounting/ grouting /fixed at garden light with suitable mm dia GI pipe light grade with its connection with 2 core flexible copper conductor cable with suitable size complete all as specified and directed. Make Havells Ordering Code LHDC11126099 or its equivalent CAT part of make Wipro / Bajaj / Philips / Surya Roshni Ltd etc complete all as specified and directed by Engineer-in-Charge.

Taking down US pipe & Supply and laying in trenches/fixed on pole with necessary clamps, nut, bolts etc GI pipe 40 mm dia light grade including necessary fittings as protection to Cable etc complete all as specified and directed by Engineer-in-Charge.

Taking down carefully aluminium point wiring (light, fan, bell, socket, power point etc) with or without conduit, casing caping, along with all connected accessories such as ceiling rose, switches, sockets, switch boards, fan regulator etc complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 sq mm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable drawn through and including PVC Casing and capping ISI Marked with its accessories Flush mounting Plastic surface boxes (upto 18 module suitble for Mylinc series of Legrand including white plates with frame upto 18 module of make suitable for Mylinc Series) for fixing switches / socket / regulators etc including 1.5 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable as earth continuity conductor to common earth & connecting to earth dolly for the following, etc complete all as specified and directed by Engineer-in-Charge. Note : 1. Porper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, ceiling lights, bulkhead lights, bldg security light etc

One light point controlled by one, one way switch single pole

One fan point controlled by one, one way switch single pole

One 3 pin, 5 Amp socket out let on independent board.

One 3 pin, 5 Amp, socket out let on same board.

All as per Item No 84 (here-in-before) but 2.5 Sqmm Copper conductor cable for phase, neutral & earth for one 3 pin, 15 Amp, socket out let on independent board

M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 sq mm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable drawn through and including PVC Casing and capping ISI Marked with its accessories and provn of CI / pressed switch box, power coated with and including 3mm thick white bakelite plastic laminated top sheet cover and fixed with brass screws cup washer for fixing switches/socket/regulators etc with and including 1.5 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable as earth continuity conductor to common earth & connecting to earth dolly for the following, etc complete all as specified and directed by Engineer-in-Charge. Note : 1. Porper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, ceiling lights, bulkhead lights, bldg security light etc

One light point controlled by one, one way switch single pole

One fan point controlled by one, one way switch single pole

One 3 pin 5 Amps socket out let on independent board

One 3 pin 5 Amps socket out let on same board

One bell point controlled by one bell push on independent board

All as per Item No 90 (here-in-before) but 2.5 Sqmm Copper conductor cable for phase, Neutral & Earth for one 3 pin, 15 Amp socket out let on independent board

S&F Modular Switch, 6 Amp, one single pole, one way single pole , one Module. etc complete all as specified and directed by Engineer-in-Charge.

S&F Modular Switch, 16 Amp, single pole, one Way, one Module. etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Socket Outlet 6 Amp,one way, single pole, 2/3 pin combined, two module etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Socket Outlet 6 Amp / 16 Amp - 2/3 pin combined two module etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Fan Regulator, Fan step regulator, 120W, - two module etc complete all as specified and directed by Engineer-in-Charge

S&F Switch Piano Flush type 230/250 Volt, 5 Amp, single pole, one way, etc complete all as specified and directed by Engineer-in-Charge

S&F bell push, switch flush type, 5 Amp etc complete all as specified and directed by Engineer-in-Charge

S&F bell, AC, 230 volts, single pole etc complete all as specified and directed by Engineer-in-Charge

S&F stepped type electronic fan Regulator flush type on the existing phenolic laminated sheet etc, as reqd single pole, 240 volts grade 100 watts heavy duty ,ISI marked etc complete all as specified and directed by Engineer-in-Charge

S&F switch socket combination multi purpose two in one, 6 pin 5 Amp, flush type ISI marked etc complete all as specified and directed by Engineer-in-Charge

S&F switch socket combination five in one, 5 Amp / 15 Amp, flush type, ISI marked etc complete all as specified and directed by Engineer-in-Charge

S&F ceiling rose surface bakelite 65mm x 50mm three terminal etc complete all as specified and directed by Engineer-in-Charge

S&F lamp holder PVC/Polycarbonate type with cord grip cap suitable for pendant fittings etc complete all as specified and directed by Engineer-in-Charge

S&F in replacement double door Sheet metal enclosures factory made DBs 8 way, (SPN DB's) 240 volts protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming As per IEC 61439-3, Suitable for Flush Mounting and Surface Mounting, With 100 A copper Busbar, With Neutral bar, Earthbar and Cable lies for Cable management, Fully shrouded, Neutral bars, Prefitted masking sheet etc complete all as specified and directed by Engineer-in-Charge

S&F in replacement double door Sheet metal enclosures factory made DBs 4 way, (TPN DB's) 415 volts protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming As per IEC 61439-3, Suitable for Flush Mounting and Surface Mounting, With 100 A copper Busbar, With Neutral bar, Earthbar and Cable lies for Cable management, Fully shrouded, Neutral bars, Prefitted masking sheet etc complete all as specified and directed by Engineer-in-Charge

S&F Isolators of the under mentioned type and rating and fixing in DBs etc complete all as specified and directed by Engineer-in-Charge (DBs measured and paid for separately under appropriate item of this BOQ) Note :- Make of the isolator should be the same as that of DB) for thre following :-

Supply & fixing MCB , SP, AC, 240 volts of 06 to 32 Amps, 10 KA Capacity, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge

Supply & fixing MCB, SPN, AC, 240 volts of 32-63 Amp, 10KA Capacity, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge

Supply & fixing MCB, TPN, AC, 415 volts of 40-63 Amp, 10KA Capacity, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge

S&F Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack LED Tube light fitiing 20 Watt with LED light source 6500 K with uniform light output, with all accessories including its connection with and including 2 core sheathed copper conductor cable of size 0.5 Sqmm with all accessories etc complete all as specified and directed by Engineer-in-Charge Make ; Havells E-LITE LED PRIDE PLUS NEO Cat No LHEXACP71N1W020) or its equivalent CAT part of make Philips / Wipro.

S&F 42 Watt LED Panel 2X2 environmental friendly, new generation,aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for armstrong/Grid ceiling, complete with separate electronic driver ceiling light 42W including connecting up with and including twin core twisted flexible copper conductor cable with suitable size of 230V , 50 HZ etc complete all as specified and directed by Engineer-in-Charge Make: Havell's Cat No: (PLUTO NEO PANEL 2X2) PLUTONE02X2PLR42WLED857S or equivalent in make of Philips/ wipro

M&L Earthing complete with galvanized earth plate electrode 600x 600 x 6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5 m below ground level connected to galvenised earth lead wire of 4 mm dia by means of nuts, bolts, washes of galvanized iron or steel all as shown in electrical plate No 5 and testing on completion including adequate charcoal dust comman salt necessary excavation & earth work PCC(1:3:6) type C-1 using graded stone aggregates pit with precast RCC Cover slab, 40 mm thick in PCC(1:2:4) type B-0 using graded stone aggregates reinforced with 8 mm TMT bars @ 100 mm c/c both ways with funnel wire mesh and 20 mm dia GI pipe medium grade as watering pipe connected to earthing lpoint etc complete all as specified and directed by Engineer-in-Charge

S&F sub main wiring with two single core PVC insulated,unsheathed, FRLS stranded copper conductor cable 4 Sqmm with 4 Sqmm PVC insulated, unsheathed, FRLS stranded copper conductor cable as earth wire drawn through and including PVC Casing and capping ISI Marked with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified and directed by Engineer-in-Charge Note : 1. Porper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. Two run of 4 Sqmm cable i.e for one run for phase, one run for neutal with one run of 4 sq.mm cable for earth and one run of PVC Casing & caping shall be measured as one unit

S&F in replacement energy saving and environmental friendly long life LED street light 25 Watt (Bldg security light) made up of pressure die cast aluminium housing with mild power LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP65 protection and impact resistance of IK07 fixed on wall with GI pipe of suitable dia and all fixing accessories including connecting up with twin core twisted flexible copper conductor cable of suitable size of 230V , 50 HZ etc complete all as specified and directed by Engineer-in-Charge Make -Havell's Cat Part: (ENDURAPEARLSL25W MP) ENDURAPEARLSL25WLED757SASYTOPCMP or equivalent in make of Philips/ wipro

Supply and fix heavy duty exhaust fan , metalic body of 450 mm sweep 900 RPM single phase 230 volt 50 Hz electric driven including louvers and all fixing accessories etc complete all as specified and directed by Engineer-in-Charge Make/Model - Havell's Turbo Force SP or its equivalent Model of make Khaitan / USHA / Bajaj / Crompton / Orient / Almonard.

Supply Laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor laid in trenches, ducts, fixed on poles/walls with proper size saddles and clamp laid under roads/path/drain/culverts through GI pipe fixed & testing and commissioning of size 10 Sqmm, 4 core etc complete all as specified and directed by Engineer-in-Charge.

Taking Down U/S Change over & Supply and fix ON LOAD change over switch 415V in sheet metal enclosures 4 pole of Capacity 63 Amp etc complete all as specified and directed by Engineer-in-Charge

Supply, installation, testing and commissioning of Presence detector (Dueal Lens) with frequency Detection angle 360 Degree including making necessary addition/alteration in the existing ciruit and making holes in POP/ceiling and fixing the presence detector etc complete all as specified and directed by Engineer-in-Charge Make - Hager Cat No. EE810 or equivalent in Havells / Siemens

Supply and fix in replacement industrial type switch socket for Geyser with 20 Amp MCB etc complete all as specified and directed by Engineer-in-Charge

S & F Lumeno LED Bulb 10 Watt (cool day light) having colour temp 6500 K and lumen output 950 suitable for "B-22 type to fix on batten holder and wall light etc complete all as specified and directed by Engineer-in-Charge

Supply and fix heavy duty exhaust fan , metalic body of 300 mm sweep 900 RPM single phase 230 volt 50 Hz electric driven including louvers and all fixing accessories etc complete all as specified and directed by Engineer-in-ChargeMake/Model - Havell's Turbo Force SP or its equivalent Model of make Khaitan / USHA / Bajaj / Crompton / Orient / Almonard.

An amount of Rs 72,617.50 shall be deducted from BOQ on account of schedule of credit

Ms. M.D. Auty

M/s Meher Construction

OM SAI ASSOCIATES