GE/U(N)-65/2020-21 REPAIR/MAINT OF INTERNAL ELECTRIFICATION IN CERTAIN MD ACCN AND OTM ACCN OF AMSD FHO AND CH(NC) UNDER GE (NORTH) UDHAMPUR

Amount

Taking down carefully the existing Copper/Aluminium point wiring of any size and type by disconnecting from the either terminals complete with switches, sockets, ceiling rose, regulators, bell etc by unscrewing and removing materials to store for keeping in safe custody for re-use or for taking credit and making good to disturb surface of walls, floors etc., complete all as specified and directed by Engr -in- charge. Note : (i) Old dismanteled wiring and accessories (other than reuse) will be contractors property and credit will be charged against schedule of credit.

Taking down carefully by unscrewing from boards / outlet boxes fittings and fixture such as, LED bulk head fitting, LED tube light fitting etc. for re use at site or carrying to the store (serviceable fitting shall be reuse) all as specified and as directed by engineer in charge.

Taking down Old Serviceable/unserviceable MCB DB and VTPN any type/size etc after disconnecting (serviceable DBs /MCBs shall be reuse), complete all as specified and directed by engineer in charge.

M&L for Point wiring for One light/fan/bell point controlled by one one way switch 5 Amp with 1.5 Sqmm single core multi standed copper conductor FRLS insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLS insulated drawn into and including concealed PVC rigid conduit of not less than 20mm dia , ISI marked terminated into annealed steel terminal boxes including 3.00 mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete making good the disturbed (white washing / colour washing / distembering) surfaces to match with existing specifications all as specified and directed by the Engr-in-charge. Note ;- Necessary wall cutting/chasing for conduit/fixture will be done through electrical cutter machine only.

All as per item Srl No. 04 herein before but for 3 pin socket outlet 5 Amp on same board, complete all as specified and directed by Engr -in-charge.

All as per item No. 04 above but for one 5 Amps socket outlet on independent board.

All as per item No. 04 above but wire size 2x2.5 Sqmm to controlled the 3 pin 5 / 15 Amps socket outlet on independent board and providing earth continuity wire using PVC insulated, FRLS 1100 volts grade un sheathed single core stranded copper conductor cable of size 2.5 Sqmm.

S&F Switch Piano flush type single pole 5 Amps One way, all as specified and directed by Engineer- in - Charge.

Fixing only serviceable Switch Piano, flush type, One way, single pole, 5 Amps, obtained from item no 02 as above complete all as directed by Engineer- in - Charge.

Fixing only serviceable Switch Piano, flush type, two way, single pole, 5 Amps, obtained from item No-02 as above complete all as directed by Engineer- in - Charge.

S&F Socket outlet Two in one, 3/5 Pin piano type 5 Amp flush type complete all as specified and directed by Engineer- in - Charge.

Fixing only serviceable Two in one, 3 Pin, 5 Amp flush type socket outlet obtained from item No-02 as above complete all as directed by Engineer- in - Charge.

S&F Switch Piano type single pole 16/20 Amps One way, complete all as specified and directed by Engineer- in - Charge.

Fixing only serviceable Switch Piano, flush type, One way, single pole, 15 Amps, obtained from Item No -02 as above complete all as directed by Engineer- in - Charge.

S&F Socket outlet Two in one, 3/5 Pin piano type 10 Amp and 20 Amp flush type complete all as specified and directed by Engineer- in - Charge.

Fixing only serviceable Two in one, 3 Pin, 5 and 15 Amps, flush type socket outlet obtained from item No-02 as above complete all as directed by Engineer- in - Charge.

S&F Ceiling rose, 3 terminal, PVC / polycarbonet, isolated body complete all as specified and directed by Engineer - in - Charge.

Fixing only serviceable Ceiling rose, 3 terminal, PVC / polycarbonet, isolated body obtained from item No-02 as above complete all as directed by Engineer - in - Charge.

S&F Electric bell (Ding dong) AC 230/250 volts grade single pole ISI marked, complete all as specified and as directed by engineer in charge

S&F switch piano flush type for bell Push 5 Amps, complete all as specified and directed by Engineer- in - Charge.

S&F Electronic type fan regulator Stepped type, 240Volt flush type suitable for 1200/1400mm sweep ceiling fan, ISI marked complete all as specified and directed by Engineer- in - Charge.

Fixing only serviceable Stepped type, electronic fan regulator, flush type on the existing phenolic laminated sheet etc. as obtained from Item No-02 as above complete all as directed by Engineer- in - Charge.

Fixing only serviceable light fittings any type as obtained against item No 2 all as specified and directed by engineer incharge

Taking down fan, ceiling cable end, dismantling blades and kept in safe custody for refixing on same location all as specified and directed by engineer in charge.

Hanging /fixing only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan obtained from item no 24

M&L for earthing in repair complete with galvanized steel earth electrode 60cmX60cmx6 mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level ) with top edge of the plate not less than 1.5m below normal ground level connected to earth lead by means of bolts nuts and washers of GI steel and including earthing pit charcoal, common salt, GI 4.0mm dia lead wire 20mm GI medium grade watering pipe 15mm bore light grade protection pipe 5 Mtr length with wire mesh and funnel PCC pit in PCC 1:2:4 type B-1 using 20mm graded stone aggregate, angle iron frame and RCC cover and earth work complete all as shown in electrical plate No.3 of SSR -2009(Part-1).

M&L for earthing in repair complete with copper plate earth electrode 60cmX60cmx3.15 mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level ) with top edge of the plate not less than 1.5m below normal ground level connected to earth lead by means of bolts nuts and washers of GI steel and including earthing pit charcoal, common salt, 20x 3 mm copper strip, 20mm GI medium grade watering pipe 15mm bore light grade protection pipe 5 Mtr length with wire mesh and funnel PCC pit in PCC 1:2:4 type B-1 using 20mm graded stone aggregate, angle iron frame and RCC cover and earth work complete all as shown in electrical plate No.3 of SSR -2009(Part-1).

S&F in replacement ultra modern designed aechitectural 2x2 LED, 6500K, 40 watt luminaire which provides soft light and glare free symmetrical illumination (VENUS NEO), complete all as per the direction of Engr-in-Charge. Make -Make of LED -Wipro as per ordering code D414065 or equivalent model of Havells or CG or any MES approved make wrt above specifications.

M & L sub main wiring with two run single core 4 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 25 mm dia PVC concealed conduit medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc making good the disturbed (white washing / colour washing / distembering) surfaces to match with existing specifications complete all as directed. Note: (i) Two runs of 4sqmm and one run of 4 sqmm cable and one run of PVC conduit/ casing capping shall be measured as one RM. (ii) Necessary wall cutting/chasing for conduit/fixture will be done through electrical cutter machine only.

All as per item No. 29 herein before but with 6 sqmm pvc copper conductor cable through pvc conduit ISI marked with 6 sqmm copper conductor cable as earth contiunity conductor.

All as per item No. 29 herein before but with 10 sqmm pvc copper conductor cable through pvc conduit ISI marked with 10 sqmm copper conductor cable as earth contiunity conductor.

M & L sub main wiring with two run single core 4 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 25 mm dia PVC surface conduit/PVC casing caping medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed. Note: Two runs of 4sqmm and one run of 4 sqmm cable and one run of PVC conduit/ casing capping shall be measured as one RM

All as per item No.32 herein before but with 6 sqmm pvc copper conductor cable through pvc conduit ISI marked with 6 sqmm copper conductor cable as earth contiunity conductor.

All as per item No. 32 herein before but with10 sqmm pvc copper conductor cable through pvc conduit ISI marked with 10 sqmm copper conductor cable as earth contiunity conductor.

S&F Switch socket combination piano type 5 pin 5 Amps flush type fixed in replacement, complete all as specified and directed by Engineer- in - Charge.

S&F Switch socket combination piano type 6 pin 16 Amps flush type fixed in replacement, complete all as specified and directed by Engineer- in - Charge.

S&F Switch socket combination Box type 5 pin 5 Amps flush type fixed in replacement, complete all as specified and directed by Engineer- in - Charge.

S&F Switch socket combination Box type 6 pin 16 Amps flush type fixed in replacement, complete all as specified and directed by Engineer- in - Charge.

Fixing only serviceable MCB DB of any type and capacity obtained from Item No 03 complete all as specified and directed by engineer incharge.

Supply and fix in repair sheet metal enclosure double door single pole and neutral 240 Volts for DB's when MCBs to be used 8 way with 200 amp rated bus bar with IP-43 protection complete all as specified and directed by engineer incharge..

All as per srl item No 40 above but 4 way, complete all as specified and directed by the Engr-in-Charge.

All as per srl item No 40 above but 12 way, complete all as specified and directed by the Engr-in-Charge.

Supply and fix in repair sheet metal enclosure VTPN 4 way 415 volt 250 Amp rated bus bar double door type,mechanical impact strength IK09 with suitable for mounting MCCB for incomer and MCBs for outing without MCCB and MCB, IP-54 protection grade fixed flush to wall complete including cable connections should be provide with necessary reducer lugs complete all as directed by Engr-in-Charge.

All as per srl item No 43 above but 6 way, complete all as specified and directed by the Engr-in-Charge.

All as per srl item No 43 above but 8 way, complete all as specified and directed by the Engr-in-Charge.

S & F and connecting with necessary copper lugs DPX3 thermal magnetic type MCCB 4 pole,100 Amp, 415 volt, with breaking capacity 16 KA including making necessary arrangement all as specified and directed by the Engr-in-Charge. Make Legrand Cat part No.420015 or equivalent to shnieder or any MES approved make wrt above specifications.

S & F and connecting with necessary copper lugs DPX3 thermal magnetic type MCCB 4 pole,160 Amp, 415 volt, with breaking capacity 16 KA including making necessary arrangement all as specified and directed by the Engr-in-Charge. Make Legrand Cat part No.420017 or equivalent to shnieder or any MES approved make wrt above specifications.

S & F and connecting with necessary copper lugs DPX3 thermal magnetic type MCCB 4 pole,200 Amp, 415 volt, with breaking capacity 25 KA including making necessary arrangement all as specified and directed by the Engr-in-Charge. Make Legrand Cat part No.420218 or equivalent to shnieder or any MES approved make wrt above specifications.

S & F and connecting with necessary copper lugs DPX3 thermal magnetic type MCCB 4 pole,250 Amp, 415 volt, with breaking capacity 25 KA including making necessary arrangement all as specified and directed by the Engr-in-Charge. Make Legrand Cat part No.420219 or equivalent to shnieder or any MES approved make wrt above specifications.

S&F connection and testing 'C' series SPN MCB 40 to 63 Amp 240V, 50Hz, 10kA for lighting and other domesitc loads incl necessary copper lugs etc all as specified and as directed by engineer incharge.

Supply and fixing, connection and testing 'C' series MCB SP6-32 Amps all as per the direction of Engr-in-Charge.

Supply and fixing connection and testing 'C' series MCB SP 40 Amps all as per the direction of Engr-in-Charge.

S&F in repair LED garnet 18 W NR lamp,4 pin type, 6500K, as per sample complete all as per the direction of Engr-in-Charge.

S&F in repair LED T8 retrofit tube rod lamp 20W, 6500K, linear lamp with PC housing for optimum light output, Specially designed diffuser to avoid direct view of LED all as per the direction of Engr-in-Charge.

Fixing only serviceable MCB SPN/SP any capacity obtained from item no 03 as above all as specified and as directed by engineer in charge.

S&F Modular fan step regulator 120W 02 module including taking down unserviceble one all as specified and as directed by engineer in charge.

S&F Modular switch 01 way 06A, 01 module including taking down unserviceble one all as specified and as directed by engineer in charge.

S&F Modular switch 01 way 16A, 01 module including taking down unserviceble one all as specified and as directed by engineer in charge.

S&F Modular bell push flush type 6A, 01 module including taking down unserviceble one all as specified and as directed by engineer in charge.

S&F Modular socket, 6A-2/3 pin, 02 module including taking down unserviceble one all as specified and as directed by engineer in charge.

S&F Modular socket, 6A/16A-2/3 pin, 02 module including taking down unserviceble one all as specified and as directed by engineer in charge.

S&F Slim linear LED lighting fixture 4/5W watt LED batten, with full base of extruded poly carbonate isolated driver, complete making all connection from ceiling rose to fittings including testing complete all as per the direction of Engr-in-Charge. Make of LED -Syska Cat No:SSK-SQ0401/Wipro Cat No : D530565/C&S Cat No: LTTBIF5WLED/W/ Havells: Cat No: LHEXBXPNIN1W005 or any MES approved make wrt above specifications.

S&F Slim linear LED lighting fixture 20 Watt LED batten, P.F greater than 0.9, input voltage range from 90 Volts to 280Volts with full base of polycarbonate extruded section acting as a heat sink with closed back isolated driver complete making all connection using 1.5sqmm copper conductor multistranded PVC insulated 2 core flexible cable with from ceiling rose to fitting complete all as specified and as directed by engineer in charge.Make Make : Syska Cat No: SSK-SQ2001/Havells Cat No: LHEXBXPNIN1W020/ or equivallent to Wipro or any MES approved make wrt above specifications.

Supply and fixing LED Bulk head (6500K) fitting of 09/10 Watt surface mounting type extruded aluminium body with diffuser complete with testing all as specified and directed by engineer in charge. Make Syska Cat No: SSK-BH-9W /Wipro Cat No : DA11265/Crompton :Cat No: LBHE-10-DL /Havells: Cat No: RUGBYNEONFT10WLED860SSYMTOPC or any MES approved make wrt above specifications.

S&F decorative ultra slim linear polycarbonate Extruded LED lighting fixture 10/12 Watt LED of input voltage AC 220V-240V, 50 Hz with colour tempetrature 6500K more than 1080 lumens of IP 20 complete making all connection using 1.5 sqmm copper conductor multistranded PVC insulated twin core flexible cable from ceilingrose to fitting complete all as per directed by Engr-in-charge. Make Syska Cat No: SSK-SQ1201 Wipro Cat No : D531065/Havells: Cat No: LUMILINEPLUSBS10WLED865SPCSS/ Philips Cat No : BN 021 LED10S- 6500 PSU GR S1 or any MES approved make wrt above specifications.

Supply and fixing LED street light fitting 25W new generation energy saving & environmental friendly long life versatile pressure die-cost aluminium IP66 with acrylic with heat resistant toughened glass, corrosion resislant complete making all connection with MCB SPN alongwith MCB Box enclosura, GI tubing light grade 25mm dia lenght 1.2 mtr, clamp, bolts, nuts and washers complete with testing all as specified and directed by engineer in charge

S&F for MCB TPN 63 Amp, 415 Volts- C curve of 10kA complete all as specified and directed by engineer in charge

S&F Plug and socket DBs, single pole and neutral enclosure with a two pin earth plug and socket with one single DP20 Amps, 240 volts MCB complete all as specified and directed by engineer in charge

M&L for cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed conduit wiring, etc, and making good, cutting not exc 10 cm girth all as specified and directed by engineer in charge.

RANBIR ENTERPRISES

MAHAJAN TRADING CO

M/S BHARAT LIGHT ELECRIC.CO

SINGH CONST CO