RENOVATION AND ALTERATION TO FLIGHT IN TEST SYSTEM AND INTEGRATION TSI P 113 AT ADE UNDER GE I RnD EAST BANGALORE

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings/roof treatment etc., not exc 15cm thickness (below or above ground level) and removal of debries to a distance not exceeding 100 Metre complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) as in floors/paving finishing the surface even and smooth without using extra cement concrete complete all as specified and directed.

M&L Vitrified ceramic tiles of size 10 mm thick light shade, area of each tile exceeding 0.36 sqm and not exceeding 0.42 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed

Ditto but as in skirting including 10 mm thick screed bed in CM 1:4 complete all as specified and directed

M&L Vitrified ceramic tiles of size 10 mm thick light shade, area of each tile exceeding 0.42 sqm and not exceeding 1 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed

Ditto but as in skirting including 10 mm thick screed bed in CM 1:4 complete all as specified and directed

M&L Vitrified ceramic tiles of size 10 mm thick dark shade, area of each tile exceeding 0.36 sqm and not exceeding 0.42 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed

Coloured Non Skid Joint less ceramic tiles (non-skid) of size 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed

Coloured glazed ceramic tiles of size 350mm x 250mm x 7mm/ 450mm x 350mm x 7mm thick, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10mm thick screeding bed in cement mortar 1:4 complete all as specified and directed including taking down old screed complete.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including snap grid of any type and cover fillets complete all as specified and directed

M & L anodised aluminium snap grid frame work for false ceiling all as specified

S&F, PVC false ceiling consisting of 600mm x 600mm x 5mm thick prelam embossed PVC sheet of density 600Kg/Cum used in panel inserts having fire resistant properties self exstinguishable suitably placed in false ceiling grid made of Aluminium / G.I./M.S. as per specification and drawing

Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified

Taking down chowkhats or frame n.exceeding 1.5 Sq. m each with shutter(s) (without taking off shutters from the frame) complete all as specified.

Taking down chowkhats or frame exceeding 1.5 but not exceeding 4 Sqm each with shutter(s) (without taking off shutters from the frame) complete all as specified.

Taking down shutters any description area exc.1 but not exc 2 sqm complete all as specified and directed.

Refixing shutter, in the same opening, of any description area exc.1 but not exc 2 sqm complete all as specified and directed.

S&F powder coated aluminium frame and/or shutter for doors and windows of any section and type, ventilators, partition/work station cubicles etc., with one or more rebates including joining cleat, rubber beading for fixing, star or suitable lock etc complete

Supply and fix for heat absorbing glass of 4 mm thick of any size complete all as specified

Supply and fix 4mm th figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane

S & F Aluminium anodised barrel tower bolts 150 mm length of extruded section

S & F Butt hinges,100mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21

S & F Aluminium handles, cast type anodised oval or 'D' type of size 100mm.

S&F 9 mm th Prelaminatd particle board, interior grade, prelaminated both sides with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

S/F venetian blinds, vertical type, 100 mm slot width of approved fabric and powder coated aluminium top railsetc complete all as specified, including dismantlilng old damaged one complete all as specified and as directed. Note: The colour, design and shade shall be as approved by GE.

S & F factory made pressed steel made out of mild steel black sheet of 1.25 mm thick of profile 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges (100 and 50mm), lock strike plate etc. Complete including one shop coat of priming and threshold of 12mm dia round bar 1 nos welded at bottom of frame, all as Specified.

35 mm thick 2nd class hard wood factory made plain framed panelled, door shutter (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed by EIC.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

Supplying and fixing FACTORY MADE SOLID PANEL PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete as per direction of Engr-in-Charge, manufacturer’s specification & drawing.

M&L for 18mm Prelaminatd particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

S&F, slip on hinges size 100mm & make ebco or its equivalent hydraulically closed type CP complete all as specified and directed to fix in CB shutter

M&L PVC lipping on edges with adhesiv to prelaminated particle board with matching colour to the prelam board to get aesthetic finish complete all as specified

M & L Solid PVC Wall Lining consisting of 5mm thick wood grain printed Printed colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing

M & L in repairs 2 mm th Linoleum, plain coloured, laid dry in floors including stretching, cutting and fitting with adhesive

Dismantling structural steel work including doors, gates, stairways but excluding framed truss etc.

Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

Taking down cement or cement lime plaster of any description from walls, including racking out joints hacking for key scrubbing down with water etc , complete all as specified.

M&L 15 mm thick external plaster in CM 1:4 on fair faces of walls, finishing the surfaces even and smooth w/o using extra cement.

M&L 10 mm thick internal plaster in CM 1:6 on other than fair faces of walls , finishing the surfaces even and smooth w/o using extra cement.

M&L 5 mm thick plaster in CM 1:3 , as in ceiling, finishing the surfaces even and smooth w/o using extra cement.

M&L for preparation of plastered or unplastered of un decorated surface of walls, chajja, balcony, facia etc by brooming down or steel wire brushing, scrapping down smoke soots, moulds, moss, efflorescent salts, treading oil and greasy spots, and applying two coat of oil Bound distemper paint over and including a coat of priming paint over 2 mm wall care putty including sand papering to obtain smooth finish complete all as specified and directed. Make: Royal in Asian or its equivalent in berger / Johnson / Nicholson.

Ditto but on old surfaces after and including complete removal of existing treatment of any type and condition complete all as directed by EIC

M & L two coat of synthetic enamel paint over old painted steel surfaces, over 10cm in width or girth, not otherwise described incl preparation of new or old previously un treated surfaces.

M & L two coat of synthetic enamel paint over new steel surfaces, over 10cm in width or girth, not otherwise described incl preparation of new or old previously un treated surfaces complete.

Material and labour for preparation of old wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparing new plastered ceiling surfaces and applying two coats of oil bound distemper over a coat primer complete all as specified.

Ditto but on old ceiling surfaces including complete removal of existing treatment complete all as directed.

M&L for preparing new plastered surfaces of wall and including two coat of exterior weather coat paint like Apex in asian paint or its equivalent over a coat of priming paint complete all as specified and directed

Material and labour for preparation of old wall surfaces by complete removal of existing treatment, preparing wall surfaces and applying two coats of exterior weather coat paint like Apex in asian paint or its equivalent over a coat of priming paint complete all as specified and directed

M & L PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in roof padding concrete as leveling course complete all as specified and directed

M & L for rendering 10 mm thick over roof concrete padding surface to obtain smooth finish in CM 1:3 and finishing the surface even and smooth without using extra cement with water proofing compound complete all as specified and directed

(a) M&L for mechanical cleaning of surface to make it free from any bituminous residue/dirt oil and Greece etc all as specified and directed by GE/Engr-in-charge. (b) M&L for cracks treatment by cutting open cracks and cleaning it from dirt/loose materials etc and filling with polyurethane based sealant with and including application of PU based primer all as direct by GE/Engr-in-charge. (c) M&L for applying water based polyurethane modified dispersion (single component, cold applied, non toxic, VOC complaint) in 03 coats including 01 coat of primer of same material after dilution of water at 50% or specific primer matching same material as per manufacturer specification and as directed by GE/EIC. A layer of geotextile grid of minimum 40gsm sandwich in between two PU layers as per manufacturer’s specification be provided.

Properties of Poly urethane based chemical shall confirm to following techincal parameters:- (i) Highly elastic (ii) UV resistance (iii) Adhesion to concrete >1N/Sqmm (iv) Tensile Strength- not less than 2.0 N/Sqmm for free film (v) Elongation- Not less than 300% (vi) Solid content by weight - not less than 60% (vii) Air/Water permeability BSEN 12390 at 5 bar -72 hours should be NIL and minimum dry film thickness of water proofing membrane must be 1.0mm (viii) Accelerated weathering (ASTM 453): Pass 1000 Hours. (ix) Reaction to fire - non inflammable.

S&F, Collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete

Taking down collapsible steel gates/shutters consisting of channel, pickers, pivoted flat bars, top and bottom runners for servicing and checking its function including fixing only new wheels, top and bottom channels, cleaning and greasing of wheels and channels etc., complete and fixing in its original position complete area exc 4.00 Sqm and n.exc 10 Sqm each.

Taking down or up steel tubing and connections and removing to store yard of size 15mm bore.

All as per item No. 60 above but of 20mm bore.

Steel water tubing medium grade 15mm bore galvanized with all fittings and fixed to walls and ceiling or laid in floors including cutting chases where required complete all as specified. Make: Tata / Jindal / Ravindra.

All as per item No. 62 above but of size of 20mm bore

Rotational moulded polythene water storage tanks double layer (cylinder each vertical with closed top) of capacity 1000 Itrs, hoisted and fixed in position as in repair iincluding disconnecting exixting tanks of any description all as specified

S&F in repairs Chromium plated bib cok 2 way double handle with flange. Make: Prayag cat part No. 7212 or equavalant.

S&F in repairs concussive push type stop valve cast copper fancy type 15mm screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe.

Vitreous china ware water closet Orissa pattern including 'P' or 'S' trap connecting to trap and to flushing pipe anti Syphonage pipe etc complete with foot rest, fixed as in repairs of size 580mm X 440mm (jointed with epoxy raison to glazed trap) including provision of lime concrete bedding complete

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white, (excluding fixing bolts, flushing cistern and flush pipe)

S&F in repair PVC low level flushing cistern of cap 10 ltrs including PVC flush pipe for squatting pan fixed to wall ISI marked completed with brackets and accessories and making good to disturbed portion complete matching with existing surface and making GI pipe connection low level complete.

S&F in repairs plastic water seat, white, closed pattern, with flat bottom and cover and mild steel chromium plated or aluminized hinging device.

S&F in repairs 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/20mm-210 gms/25mm-455gms/40mm-690 gms)

S&F in repairs Vitreous China Urinal, half stall type white (excluding flushing cistern, flush pipe and waste pipe)

S&F in repairs vitreous china urinal partition white of size 310x700 mm.

S&F in repairs vitreous china wash hand basin (Pedestal type) white flat back of size 550x400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands exclusive of waste pipe but including brass chromium plated waste coupling with long screwed sank and fly nuts.

Pillar tap fancy type cast copper alloy, with capstan head chromium plated, screwed down high pressure, with or without letter 'Hot' or cold with long screwed shanks and fly nut screwed for iron pipe of bore 15mm , complete all as specified and directed. (weight of pillar tap shall not be less than 665 gms).

S&F in repair 450mm long PVC connection with PTMT check nuts for 15mm bore pipes of approved quality.

S&F Brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges, fixed in repair.

S & F in repair toilet paper holder chromium plated fixed to wall with chromiuim plated brass screws

S & F in repair angle cock fancy type chromium plated 15mm bore complete all as specified. (Make : Prayag/ Parryware/ Jaquor)

S&F in repairs CP health Faucets (1m tube & Hook) Prayag cat part No. BEA-81 or eqlnt

Demolition of brick work built in cement mortar including all quions, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles.

Material and labour for brick work with sub class 'B' straight or curved on plan exc 6 m radius with old size bricks built in CM 1:4.

Provision of cable duct by cutting and making good to run cables complete

Cable duct covers modular type (HDPE) complete made to shape and fixed at site

Material and labour for Stainless Steel railing/posts of required size, fixed to sides of platform/ path/ stairways etc including suitable size steel bolt/ fastners/ fitting etc complete all as specified and directed.

Taking down carefully old unserviceable aluminium/ copper point wiring (light, fan,socket or power) complete with fittings such as switches, sockets, ceiling rose, light fittings etc and making good the distrubed surfaces to match with existing surfaces complete all as specified and directed.

Taking down old unserviceable DBs including MCCBs / MCBs complete issued under sch of credit and making good the distrubed surfaces to match with existing surfaces complete all as specified and directed.

Taking down old unserviceable sub main wiring of any type and size and making good the distrubed surfaces to match with existing surfaces complete all as specified and directed.

M&L for point wiring with single core copper conductor cable of size 1.5 Sq mm, PVC insulated, sheathed, multistranded FRLS type, 1100V grade conforming to IS-694 drawn through in and including non-metallic rigid PVC conduit 25 mm dia medium grade ISI marked and as per IS: 9537 (Part-3) with conduit acessories concealed in walls / floors / ceiling etc duly cutting chases / grooves and making good the distrubed surfaces to match with existing surfaces including GI modular flush boxes, modular white plate with frame of suitable sizes for mounting of modular switches, sockets and regulators etc and including 1.5 Sqmm PVC insulated, sheathed, copper conductor cable, FRLS type, 1100V grade green in colour as earth continuity conductor connecting to earth dolly complete all as specified and directed for One light point controlled by one, one way modular swith

All as per Sl item No. 87 above, but One ceiling fan/Exhaust fan point controlled by one, one way modular switch

All as per Sl item No. 87 above, but One 3 pin 6 amps socket outlet point controlled by one modular switch on the same board with other switches

All as per Sl item No. 87 above, but One 3 pin 6 amps socket outlet point controlled by one modular switch on Independent board

All as per item No 87 above, but using 2.5 sqmm copper conductor cable, PVC insulated, sheathed, multistranded FRLS type cable, 1100 volts grade conforming to IS-694 alongwith 2.5 sq mm cable as earth continuity for 6pin 16 amps socket outlet point controlled by one modular switch on Independent board

Supply & fix modular switch 6 A, single pole, 1 way, 230 V, 1 module complete all as specified and directed

Supply & fix 3 Pin 6 A modular socket outlet, 230 V, 2 module complete all as specified and directed

Supply & fix modular switch 16 A, single pole, 1 way, 230 V, 1 module complete all as specified and directed

Supply & fix 6 Pin 16 A modular socket outlet, 230 V, (6A/16A) 2 in 1, 2 module complete all as specified and directed

Supply & fix ceiling rose surface bakelite three terminal complete all as specified and directed

S&F VTPN MCCB Distribution Board TP&N 6 Way, 415 Volts, Vertical type with epoxy powder coated with sheet steel enclosure Double Door, IP 43 protection with 200 Amps rated bus bar suitable for mounting MCCB as incomer and MCB TP/ SP as outgoings and making electric connections as required and all as specified and as directed.

S&F VTPN MCCB Distribution Board TP&N 8 Way, 415 Volts, Vertical type with epoxy powder coated with sheet steel enclosure Double Door, IP 43 protection with 200 Amps rated bus bar suitable for mounting MCCB as incomer and MCB TP/ SP as outgoings and making electric connections as required and all as specified and as directed.

S&F VTPN MCCB Distribution Board TP&N 12 Way, 415 Volts, Vertical type with epoxy powder coated with sheet steel enclosure Double Door, IP 43 protection with 200 Amps rated bus bar suitable for mounting MCCB as incomer and MCB TP/ SP as outgoings and making electric connections as required and all as specified and as directed.

Supply and Fixing MCCB 100Amps, 4P, 16 KA, 415 V, 50Hz, AC and making electric connections as required and all as specified and as directed.

Material and labour for Distribution board TP & N, 6 way, 415 V, epoxy powder coated with metal door, IP-43 protection fixed flush to wall and suitable for universal mounting with 200 A copper bus bar, neutral bar, standard DIN rail, earth bar and top and bottom removable gland plates with Knockouts complete all as specified and directed.

Material and labour for Distribution board SP & N, 4 way, 230 V, epoxy powder coated with metal door, IP-43 protection fixed flush to wall and suitable for universal mounting with 200 A copper bus bar, neutral bar, standard DIN rail, earth bar and top and bottom removable gland plates with Knockouts complete all as specified and directed.

Material and labour for Distribution board SP & N, 8 way, 230 V, epoxy powder coated with metal door, IP-43 protection fixed flush to wall and suitable for universal mounting with 200 A copper bus bar, neutral bar, standard DIN rail, earth bar and top and bottom removable gland plates with Knockouts complete all as specified and directed.

Material and labour for Distribution board SP & N, 12 way, 230 V, epoxy powder coated with metal door, IP-43 protection fixed flush to wall and suitable for universal mounting with 200 A copper bus bar, neutral bar, standard DIN rail, earth bar and top and bottom removable gland plates with Knockouts complete all as specified and directed.

Supply and fix MCB TP&N 63 A, 415 V,10 KA, C curve type complete all as specified and directed.

Supply and fix MCB SP&N 40 A, 230 V,10 KA, C curve type complete all as specified and directed.

Supply and fix MCB SP 6-32 A, 230 V,10 KA, C curve type complete all as specified and directed.

M&L for sub main wiring with 4 runs of 16 sq mm of single core copper conductor cable PVC insulated, sheathed, multistranded FRLS type, 1100V grade conforming to IS-694 drawn through in and including non-metallic rigid PVC conduit not less than 25 mm dia medium grade ISI marked and as per IS: 9537 (Part-3) with conduit accessories concealed in walls / floors / ceiling etc duly cutting chases / grooves and making good the disturubed surfaces to match with existing surfaces including 2 run of 16 Sq mm single core copper conductor cable, PVC insulated, sheathed, multistranded FRLS type, 1100V grade green in colour as earth continuity conductor and connecting to earth dolly complete all as specified and directed Note: 6 runs of 16 Sq mm in PVC conduits will be measured and paid as one unit.

M&L for sub main wiring with 4 runs of 10 sq mm of single core copper conductor cable PVC insulated, sheathed, multistranded FRLS type, 1100V grade conforming to IS-694 drawn through in and including non-metallic rigid PVC conduit not less than 25 mm dia medium grade ISI marked and as per IS: 9537 (Part-3) with conduit accessories concealed in walls / floors / ceiling etc duly cutting chases / grooves and making good the disturubed surfaces to match with existing surfaces including 2 runs of 10 Sq mm single core copper conductor cable, PVC insulated, sheathed, multistranded FRLS type, 1100V grade green in colour as earth continuity conductor and connecting to earth dolly complete all as specified and directed Note: 6 runs of 10 Sq mm in PVC conduits will be measured and paid as one unit.

M&L for sub main wiring with 2 runs of 6 sq mm of single core copper conductor cable PVC insulated, sheathed, multistranded FRLS type, 1100V grade conforming to IS-694 drawn through in and including non-metallic rigid PVC conduit not less than 25 mm dia medium grade ISI marked and as per IS: 9537 (Part-3) with conduit accessories concealed in walls / floors / ceiling etc duly cutting chases / grooves and making good the disturubed surfaces to match with existing surfaces including 1 run of 6 Sq mm single core copper conductor cable, PVC insulated, sheathed, multistranded FRLS type, 1100V grade green in colour as earth continuity conductor and connecting to earth dolly complete all as specified and directed Note: 3 runs of 6 Sq mm in PVC conduits will be measured and paid as one unit.

M&L for sub main wiring with 2 runs of 4 sq mm of single core copper conductor cable PVC insulated, sheathed, multistranded FRLS type, 1100V grade conforming to IS-694 drawn through in and including non-metallic rigid PVC conduit not less than 25 mm dia medium grade ISI marked and as per IS: 9537 (Part-3) with conduit accessories concealed in walls / floors / ceiling etc duly cutting chases / grooves and making good the disturubed surfaces to match with existing surfaces including 1 run of 4 Sq mm single core copper conductor cable, PVC insulated, sheathed, multistranded FRLS type, 1100V grade green in colour as earth continuity conductor and connecting to earth dolly complete all as specified and directed Note: 3 runs of 4 Sq mm in PVC conduits will be measured and paid as one unit.

Taking down ceiling fan 1200/1400 mm sweep and dismantling the fan for carrying out servicing, greasing including replacing rubber reel, clamps, cottor pin and other minor parts etc, cleaning and filling cavities with filler and painting of ceiling fans with one coat of synthetic enamel paint by spraying and refixing the same and making electric connection with proper cable complete all as specified and directed.

Taking down old existing wall mounted air circulator fan of any size and dismantling the fan for carrying out servicing, greasing including replacing minor parts cleaning and filling cavities with filler and painting of wall fans with one coat of synthetic enamel paint by spraying and refixing the same and making electric connection with proper cable complete all as specified and directed.

Taking down old existing exhaust fan of any size and dismantling the fan for carrying out servicing, greasing including replacing minor parts cleaning and filling cavities with filler and painting of exhaustl fans with one coat of synthetic enamel paint by spraying and refixing the same and making electric connection with proper cable complete all as specified and directed.

M&L for Earthing complete with copper earth plate of size 600 x 600 x 3.15 mm buried directly in ground vertically to a depth not less than 2.25 m deep below GL with the top edge of the plate at a depth not less than 1.5m from below normal GL connected to and including copper strip 20 x 3 mm as earthing lead by means of nuts, bolts, washers, check nuts and connected to earthing test point all as shown in electric plate No. 3 of SSR Part-I of 2010 and as specified or indicated and testing on completion including excavation / earthwork in any type of strat PCC (1:3:6) type C1 earthing chamber, precast slab 50mm thick in cement concrete (1:2:4) type B1 (reinforced with welded steel wire fabric (XPM) weight not less than 4 Kgs of 40mm bore light grade and lugs with and lugs, including copper strip with GI protection pipe of 40mm light grade 7.5m long etc complete all as specified and directed Note: Rate quated shall deemed to include cost of excavation in any type of statra, RFR and removal upto 50 metre, PCC Pit, funnel and RCC cover plate, GI pipe etc.

M & L for copper earth continuity main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit of size 20 x 3 mm all as specified and directed.

S&F Single pole and neutral enclosure with two pin and earth plug and socket including MCB SP 20 A, 10 KA, C curve type complete all as specified and directed.

S&F Triple pole and neutral enclosure with two pin and earth plug and socket including MCB TP 32 A, 10 KA, C curve type complete all as specified and directed.

S&F Triple pole and neutral enclosure with two pin and earth plug and socket including MCB TP 63 A, 10 KA, C curve type complete all as specified and directed.

Supply and fixing Recess mounted full panel LED luminaire 36 watt fitting of size 2' x2' with white powder coated housing and frame in CRCA sheet, high efficiency LED grade diffuser, electronic driver duly pre-wired upto terminal block, CRI>80, Colour temperature-5700K, IP20, 50000 burning hours as per L70 Criteria, Ambient temperature-0 to 50DegC, Driver Efficiency>85%, THD<10%, Powerfactor>0.95, Surge protection in CM-3KV, Multistage isolated Constant current-Constant voltage operated driver with range 150-270V AC and Safety extra low voltage safe level<60V DC as per IEC Standard and making connections etc as required complete all as specified and directed.

S&F, LED light fitting 20 Watt, 6500K, 2000 Lumens surface / ceiling mounted batten fitting with polycarbonate body enviormental friendly with better asthetic finish for soft light duly wired upto terminal block complete all as specified and directed.

S&F, Suspended type LED light fitting 24 Watt, Uniquely clean, high liminance level suitable for indoor lighting with fixing arrangement all as specified and directed.

S&F, On-Load change over switch 63 A, 4 pole, 415V, 50 Hz, AC in sheet metal enclosure and necessary fixing arrangement and making connections by providing lugs etc complete all as specified and directed.

S&F modular type starter power unit of capacity 20 Amps 230 Volts AC 50 Hz suitable for 4 module type for controlling air conditioner complete with modular accessories and making electric connection complete all as specified and directed.

S&F UPVC trunking system of size 80 x 50 mm complete with all accessories and fixing arrangements complete all as specified and directed.

S&F flexible cover of full width suitable for 80 x 50 mm UPVC trunking UPVC trunking system complete with all accessories and fixing arrangements complete all as specified and directed.

S&F power console comprising of 5 Nos 16 Amps modular switches and 6 pin 16 Amps modular socket outlets complete with necessary modular plates, boxes duly assembled in polycarbonate box and 1 MCB SP 20 Amps and indication lamp and making internal wiring including fixing arrangements on pedastal made out of GI frame of suitable size complete all as specified and directed.

Supply, installation, testing & commissioning of Fire Alarm Control Panel complying with BS EN 54 single loop panel of capacity from 99 detectors and 99 modules upto 200 detector and modules including battery backup facility by providing battery 12 volts, 7 Ah including taking down old unserviceable item complete all as specified and directed.

S&F, detectors complying with and type certified to EN-45 addressable type multi sensor detectors with heat and smoke combination including taking down old unserviceable item complete all as specified and directed.

S&F, addressable manual call point resettable type including taking down old unserviceable item complete all as specified and directed.

S&F, addressable sounder including taking down old unserviceable item complete all as specified and directed.

S&F, control module including taking down old unserviceable item complete all as specified and directed.

S&F, response indicator for detectors which are placed in above false ceiling including taking down old unserviceable item complete all as specified and directed.

Supply, installation, testing and commissioning of Fire Alarm control cable with PVC insulated, sheathed cable galvanised steel strip or wire armoured, electric control cables (heavy duty) with stranded copper conductor cable of size 1.5 sqmm, 2 core 1100 volts grade red in colour and shall be fixed on wall surface by providing GI saddles, clamps etc, including taking down old unserviceable item complete all as specified and directed.

Sai Ram Builders

Lucky Enterprises