Combined Package for establishing following 110/11kV S/S and Construction of associated lines in Belagavi District, Work A- 110/11kV GIS S at Sadashiv Nagar & laying of 110kV UG cable of 0.355km in Belagavi Taluk. Work-B at Muragod in Soundatti Taluk Work C at Kerur in Chikkodi Taluk. Work D- Karadaga in Nippani Taluk. Work E Pamaladinni in Gokak Taluk. Work F- Construction of 110kV line from Bhoj S/S to Boragaon S/S of 12.544km and 110kV TBs in Nippani Taluk

Station Supply with ASL

Power Transformer:

20 MVA, 110/33-11 kV Transformer, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC ONAN/ONAF with fan control cubicle, RTCC ...

Nitrogen Injection fire extinguishing system-supplying, erection & incluidng civil Engineering works, soak pit etc., of the fire lighting system for Power Transformer below 100 MVA per technical spec...

Fire detection system using smoke detectors heat detectors as per specification for GIS hall and control room: Addressable type

Metal encapsulated SF6 gas insulated Switchgear 40kA rating suitable for indoor installation of modular design

1) (i) 110KV Line (U.G. Cable) Module: with GIS surge arrestor. (2P+1F)=3Nos

Each module ...

ii) Local Control cubicle for 110KV Line (U.G. Cable) Module as per specification.

2) (i) 110kV Transformer Module (110/11kV - 20MVA) :

Each module comprising of following:

a) SF6 circuit breaker Complete with operating Mechanism, 1600A, 1Phase/3phase -1 No.

b) Disconnector:

ii) Local Control cubicle for Transformer Module (For 20MVA - 110KV Side) as per specification

3) (i) 110kV Bus Coupler module:

Each module comprising of following:

a) SF6 circuit breaker Complete with operating Mechanism, 1600A, 1Phase/3phase -1 No.

b) Disconnector:

b(i) 3 Phase, Single Pole...

3) (ii) Local Control cubicle for 110 KV Bus coupler & Bus PT Module as per specification

110 KV (1 module for each bus)

Each module comprising of following:

a) Disconnector:

a(i) 3 Phase, Single Pole, Group operated isolator switch complete with manual & motor driven opera...

5) Bus Maintenance earth switch 3 Phase, Single pole, Group operated maintenance earthing switch complete with manual operating mechanism.

i) 110 KV - 2 Nos(1 for each bus)

C)11 kV Isolators:

i) 11KV isolators, Double Break 400A, 25KA capacity with rigid bi-metallic terminal connectors suitable for coyote ACSR for Capacitor Bank

ii) 11 kV isolator, single break 400 A, 25 KA capacity with Roaster switch, with rigid bimetallic terminal connector suitable for coyote ACSR.

11kV Class, 25kA, NCT of ratio 1200-800/1-1-1A for REFR Protection (of similar rating and ratio as that of Incomer of 11kV Switchgear) with terminal connector suitable for 2 Nos. of Copper flats as p...

v) 9 kV, 10 KA with connector and clamp

Work-B: Additional 6nos for LV side of transformers

Capacitor Bank: Design, Engineering , supply, erection, testing & commissioning of 2.9 MVAR, 12.1KV Capacitor Bank, star connected, Double Bank with internal fuses, terminal connectors, with suitable ...

Relay & Protection Panel for Sub-station Automation System in 110 kV Sub-station complete as per technical specification

Note: 1. All the C&R Panels and associated panels shall be of one and the same ...

b) For 110 kV Line) - Type 1L (As per Annexure RPP4-Cable-SAS)

c) For 110 kV Panel for Bus Coupler - Type 1BC (As per Annexure RPP6-SAS)

d) 11kV Line & Capacitor Bank - Type 1L (Annexure RPP7-SAS (Provision for 2 line feeders to be made in one panel) (provision for 1 line & 1 Bus coupler to be made in one panel) (Provision for 2 CB to ...

e) Numerical differential cum distance relay

Note: The Numerical differential cum distance relays of same make provided at proposed Sadashivanagar end shall be provided, installed, interfaced, commis...

2) Sub-station Automation System

(As per Annexure - SAS of Relay & Protection Panels and Sub-station Automation specification)

a. The Accuracy class of metering core of CTs and also trivector me...

Total Weight of of Station structures , Mounting Structures , Lightning Mast & street lighting structure fabricated out of galvanized mild steel.

Note : Rate to be quoted on t basis

For detailed quant...

Total Weight of supply of Bolts & nuts of Station structures , Mounting Structures , Lightning Mast & street lighting.

Note : Rate to be quoted on t basis.

For detailed quantity break up refer technoc...

11 kV ODS and take off structure:

Supplying of Double pole structure with 9.5 Mts. RCC poles WL 300 Kgs for mounting 11 kV 400 A Roaster Isolators and 9 kV, 10 KA surge arrestor (3 No) complete set ...

BUS BAR FORMATION :

A) Terminal Connectors & Pad Clamps:

a) Terminal Connectors for Twin Drake ACSR. (At Tr. LV bushing).

b) Pad Clamps for Single Drake ACSR (for UG cable at Tr. Side).

c) Pad Clamps for Coyote ACSR (for 240Sqmm UG Cable at DP).

d) PG Clamp for Drake ACSR (for Tr. LV Bushing to cable jump).

e) PG Clamp for coyote (for LA jump on DP).

Auxiliary Transformer :

Supply of Station Auxiliary Transformer-copper winding with oil, outdoor type, 100 kVA, 11 kV/433 V, 3 Ph, Vector group Dyn 11 off load tap changer(5 taps) with step voltage ...

Supplying of DP structure with 9.5 mtr RCC poles, 11 kV 400 A double break isolators, 9 kV, 10 KA surge arrestor (3 No), H-Frame along with DOLO/HG fuse unit, LTprotection kit/LTD box, LT Trivector me...

LTAC Panel (Indoor):

LTAC Panel (Indoor), 415 V as per technical specification comprising of voltmeter and ammeter, 2 I/C ACB 200A + 4 O/G SFU 63A + 12 O/G SFU 32A + 1 B/C SFU 200A + 1DG C/O Switch 3...

AC Distribution box (outdoor) Single front type with 6 terminals 1200 x 1350 x 300 mm one I/C of 100 A MCCB 20 KA+ 6 O/G 16 A MCB +1 O/G of 100 A HRC Fuse panel 415 V outdoor type:

For Work-A : 750...

D.G. Set: Diesel Generating Set 3 Ph, 50 Hz, 415V, 0.8PF, 25KVA capacity D.G. Set

STATION BATTERY & BATTERY CHARGER :

a) Station Battery Set: 220V, 300AH Plante type Battery set consisting of 110No. cells per bank.

Battery Charger: 2 x 220 V, 300 AH (with 2 nos. of float and 2 nos. of float cum boost including control panels, change over arrangement etc., complete as per technical specification along with 2 sepa...

Power Cable from Auxiliary Transformers to LTAC Panel:

a) 1.1KV PVC insulated 240sq.mm Al. Cable, 3.5 core with glands / lugs / ferrules.

b) 1.1KV PVC insulated 70sq.mm Al. Cable, 3.5 core with glands / lugs / ferrules.

1.1 kV Grade PVC Insulated armoured copper control cables of sizes,with Lugs/Ferrules/Gland as per technical specifications.

i) 19C x 2.5 Sq.mm

ii) 10C x 2.5 Sq.mm

iii) 4C x 6 Sq.mm

iv) 4C x 2.5 Sq.mm

vii) 4C x 16 Sq.mm

viii) 4C x 4Sq.mm

ix) 2C x 70Sq.mm

11KV U.G. Cable with the required cable terminations at both ends as per specifications.

i) One run of 11kV, XLPE 95 sq.mm Al., 3 core cable -(to be run for Auxiliary Transformers from 11KV switch ...

ii) 11KV XLPE cable, 1000Sq. mm. Aluminium cable from 110/11KV transformers to 11KV Switchgear.

iii) 11KV XLPE cable, 240Sq. mm. Aluminium cable 3 Core to be run from 11KV Switchgear to 11kV Capacitor Bank and 11kV take off DP Structure.

Cable termination kits:

iv) Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable ( Indoor type )

v) Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable (Out door type)

vi)Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable ( Indoor type )

vii)Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable (Out door type)

viii)Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable ( Indoor type )

ix)Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable (Out door type)

FIRE FIGHTING EQUIPMENTS WITH NECESSARY MOUNTING STANDS:

i)Foam type extinguisher (Mechanical) 50 Ltr. capacity

ii) Foam type extinguisher (Mechanical) 9 Ltr. capacity

iii) Water type (gas pressure type) 9 Ltr. capacity

iv) Carbon di-oxide type 4.5 kg Capacity

v) Sand type G.I Buckets 15 Ltr. Capacity

vi)Steel stands for above to have 4 buckets to each stand.

vii) Dry chemical powder type - 6 kgs

Earth Resistance Tester

Welding machine (arc welding) 10KVA

Heavy Duty Drilling machine

Grounding Sticks

(Note: Grounding sticks extendable upto 18 ft : 3 nos. of each 6 ft Sticks of 3 phase R, Y, B (3 nos. of 1 set) rates considered)

Manila Rope 3/4"

Files of various Sizes

Portable Drilling Machine with stand (heavy duty)

Hand Drilling Machine

Steel Measuring tape 30 Mtrs

Steel Measuring tape 15 Mtrs

MISCELLANOUS ITEMS

i) Rubber mats 1000 mm x 1000 mm x 10 mm size

ii) First aid box.

iii) Shock treatment charts, hard board, liminated with coloured pictures & literature both in Kannada & English.

iv) Water filter / Water purifier : Wall mounting type (Aqua-guard type).

v) Sub-station name board duly painted.

vi) Fixograph of size 1.5m x 2.5m with English / Kannada alphabets.

vii) Brass cupboard lock 6 levers (best make of approved quality) 75 mm size

viii) Danger board(prohibited) with support structure including fixing in front of the gate

ix) Equipment name plates and earthing name plates including fixing at outdoor yard

Furniture for Control Room Staff and maintenance staff

i) Steel Almirahs 6 1/2 feet

ii) Steel Almirahs 6 1/2 feet with glass panel doors

iii) Officers tables

iv) Steel Slotted angle rack (big Size)

v) Steel Slotted angle rack (small Size)

vi) Steel dustbins

vii) Executive revolving chairs

viii) ‘S’ Type Arm Chairs

ix) Steel folding Chairs

STATION & YARD LIGHTING (OUTDOOR)/Lightning Protection: (To be designed, assessed & quoted by the bidder)

Fabricated structures of 5 meter height with peak with provision for lightning finials string...

ii) PVC Insulated Copper Control Cables : 1.1 KV PVC insulated Copper Control Cable with glands/Lugs/ Ferrules etc as per technical specification.

iii) Supply & Fixing of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injectio...

Station Erection with ASL

Power Transformer:

(i) 20 MVA, 110/33-11kV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC ONAN/ONAF with fan control cubicle, RTCC Panel, fi...

Erection, Testing and Commissioning of 110KV Line (U.G. Cable) GIS Module: with GIS surge arrestor (2P+1F)=3Nos

Note: For details of each GIS Module refer Station Supply Portion.

Erection, Testing and Commissioning of 110kV Transformer GIS Module (110/11kV -20MVA) = 2

Note: For details of each GIS Module refer Station Supply Portion in techno-commercial sheet.

Erection, Testing and Commissioning of 110kV Bus Coupler GIS module = 1

Note: For details of each GIS Module refer Station Supply Portion in techno-commercial sheet.

Erection, Testing and Commissioning of PT GIS module:110 KV (1 module for each bus) = 2

Note: For details of each GIS Module refer Station Supply Portion in techno-commercial sheet.

Bus Maintenance earth switch 3 Phase, Single pole, Group operated maintenance earthing switch complete with manual operating mechanism.

i) 110 KV - 2 Nos(1 for each bus)

B.11 kV Isolators:

i)11KV isolators, Double Break 400A, 25KA capacity with rigid bi-metallic terminal connectors suitable for coyote ACSR for Capacitor Bank

ii) 11 kV isolator, single break 400 A, 25 KA capacity with Roaster switch, with rigid bimetallic terminal connector suitable for coyote ACSR.

11kV Class, 25kA, NCT of ratio 1200-800/1-1-1A for REFR Protection (of similar rating and ratio as that of Incomer of 11kV Switchgear) with terminal connector suitable for 2 Nos of 75mmx6mm Copper fla...

SURGE ARRESTOR : (Porcelain housing) metal oxide, Gapless type with rigid bimetallic connectors suitable for Moose ACSR.

i) 9 kV, 10 KA with connector and clamp

Relay & Protection Panel for Sub-station Automation System in 110 kV Sub-station complete as per technical specification

Note: 1. All the C&R Panels and associated panels shall be of one and the same ...

b) For 110 kV Line) - Type 1L (As per Annexure RPP4-Cable-SAS)

c) For 110 kV Panel for Bus Coupler - Type 1BC (As per Annexure RPP6-SAS)

d) 11kV Line & Capacitor Bank - Type 1L (Annexure RPP7-SAS (Provision for 2 line feeders to be made in one panel) (provision for 1 line & 1 Bus coupler to be made in one panel) (Provision for 2 CB to ...

Erection of Station structures,Mounting Structure,Lightning Mast & street lighting including Bolts & nuts

Note : Rate to be quoted on t basis

for detailed quantity break up refer technocommercial shee...

11 kV ODS and take of structure

Erection of Double pole structure with 9.5 Mts. RCC poles WL 300 Kgs for mounting 11 kV 400 A Roaster Isolators and 9 kV, 10 KA surge arrestor (3 No) complete set .

BUS BAR FORMATION :

Formation of Main/CrossBus with Single Moose/Drake Conductor.

Note: The scope also includes installing insulator strings complete with necessary Hardwares and stringing of the co...

Auxiliary Transformer

Erection of Station Auxiliary Transformer-copper winding with oil, outdoor type, 100 kVA, 11 kV/433 V, 3 Ph, Vector group Dyn 11 off load tap changer(5 taps) with step voltag...

Erection of DP structure with 9.5 mtr RCC poles, 11 kV 400 A double break isolators, 9 kV, 10 KA surge arrestor (3 No), H-Frame along with DOLO/HG fuse unit, LTprotection kit/LTD box, LT Trivector met...

LTAC Panel (Indoor), 415 V as per technical

specification comprising of voltmeter and ammeter,

For Work-A: 2 I/C ACB 200A + 4 O/G SFU 63A + 12 O/G SFU 32A + 1 B/C SFU 200A + 1DG C/O Switch 300A etc.

AC Distribution box (outdoor) Single front type with 6 terminals 1200 x 1350 x 300 mm one I/C of 100 A MCCB 20 KA+ 6 O/G 16 A MCB +1 O/G of 100 A HRC Fuse panel 415 V outdoor type:

Work-A : 750x135...

STATION BATTERY & BATTERY CHARGER :

a) Station Battery Set: 220V, 300AH Plante type Battery set consisting of 110No. cells per bank.

Battery Charger: 2 x 220 V, 300 AH (with 2 nos. of float and 2 nos. of float cum boost including control panels, change over arrangement etc., complete as per technical specification along with 2 sepa...

Power Cable from Auxiliary Transformers to LTAC Panel:

a) 1.1KV PVC insulated 240sq.mm Al. Cable, 3.5 core with glands / lugs / ferrules.

b) 1.1KV PVC insulated 70sq.mm Al. Cable, 3.5 core with glands / lugs / ferrules.

1.1 kV Grade PVC Insulated armoured copper control cables of sizes,with Lugs/Ferrules/Gland as per technical specifications.

i) 19C x 2.5 Sq.mm

ii) 10C x 2.5 Sq.mm

iii) 4C x 6 Sq.mm

iv) 4C x 2.5 Sq.mm

vii) 4C x 16 Sq.mm

viii) 4C x 4Sq.mm

ix) 2C x 70Sq.mm

11kV Switchgear:

A) 11kV, 25kA, Metal Clad VCB Switchgear (1600A for Incomer and 1250A for feeders), outdoor type, each comprising of (2IC+1BC+12F+2CB+1AP) (Remote Announciation cum Control panel) wi...

11KV U.G. Cable with the required cable terminations at both ends as per specifications.

i) One run of 11kV, XLPE 95 sq.mm Al., 3 core cable - (to be run for Auxiliary Transformers from 11KV switch...

ii) 11KV XLPE cable, 1000Sq. mm. Aluminium cable from 110/11KV transformers to 11KV Switchgear.

iii) 11KV XLPE cable, 240Sq. mm. Aluminium cable 3 Core to be run from 11KV Switchgear to 11kV take off DP Structure.

iv) Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable ( Indoor type )

v) Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable (Out door type)

vi)Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable ( Indoor type )

vii)Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable (Out door type)

viii)Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable ( Indoor type )

ix)Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable (Out door type)

STATION & YARD LIGHTING (OUTDOOR):

PVC Insulated Copper Control Cables : 1.1 KV PVC insulated Copper Control Cable with glands/Lugs/ Ferrules etc as per technical specification

Earth Mat Formation:

Note for Work-A:

1. Sodium Bentonite treatment is to be provided to all CI pipe electrodes, earth mat conductors & Deep bore electrodes.

2. The BOM provided for CI pipe electrod...

c) Grounding of equipments with 75 x 12 mm G I flat and connecting equipments to the earth mat/ground pit including all connected works with all materials supplied by the contractor.

Providing 40mm dia, 1.075mtr. long Earthmat Spike of MS Rod including bending top 50/75mm etc and covering with sodium bentonite clay as per the drawing/standard specification and consolidation

Providing C.I. Pipe of 100mm ID 13mm thick 2.75 mtr. long with 2 part GI Flat 50x6mm clamp welded allround the pipe etc., including cost of excavation (all materials supplied by contractor)

Supplying and fixing 450mm dia x 450mm height 1.5" to 2" Hume pipe collars for earth pits.

Providing deep bore earthing: Sinking bore of 150mm clear dia using fast rig including fixing of 40mm dia MS rod, including jointing the pipes as per KPTCL standards & providing sodium bentonite treat...

b) 40mm dia M S rod

c) Bentonite clay (for 50Nos Deep Bore & 41Nos CI Pipes)

d) GI flats for joining two rods by welding to obtain continuos length (Including Material labour etc,. Complete)

Line Supply with ASL

Grand Total weight of Tower parts- High Tensile Steel

Note:1. Rate to be quoted on per tonne Basis

2. For detailed quantity break up refer technocommercial sheet.

Grand Total weight of Tower parts- Mild Steel

Note:1. Rate to be quoted on per tonne Basis.

2. For detailed quantity break up refer technocommercial sheet.

Grand Total weight of Bolts , Nuts& Washers

Note:1. Rate to be quoted on per tonne Basis.

2. For detailed quantity break up refer technocommercial sheet.

Tower accessories :

1) Number Plates

2) Danger Boards

3) Circuit plate

4) Phase plate (Set of 3 No.)

5) Earth bond 300 mm long

6) Earth bond 450 mm long

Conductor & Earth wire :

a. Lynx ACSR Conductor with 1.5% sag

c. Ground wire- 7/3.15mm

Note: in Work-A Ground wire is required For Anchor Tower drop

I) Insulator strings and clamps for Lynx ACSR conductor with Hardwares and Arcing Horns as per technical specifications

NOTE: All the Insulator strings and hardware fittings quoted by the bidder shall...

B. Suspension insulator strings consisting of any one of the following:

a.Suspension Insulator string consisting of 1X7nos. of 110kV, 90kN Disc insulators

I.Insulator Hardwares & Clamps suitable for Lynx ACSR Conductor as per Technical Specification:

i) Single Tension Clamp with hardware and arcing horn suitable for 1x8nos. of 110kV, 90kN insulator to...

ii)Double Tension Clamp with hardware and arcing horn suitable for 2x8nos. of 110kV, 90kN insulator to suit Lynx ACSR.

iii) Single Suspension Clamp with hardware and arcing horn suitable for 1x7nos. of 110kV, 90kN insulator to suit Lynx ACSR.

Accessories for Lynx ACSR Conductor :

b) Pre formed armour rods for Lynx ACSR Conductor

c) Repair sleeves for Lynx ACSR Conductor

d) P G Clamps for Lynx ACSR Conductor

e) Vibration dampers for Lynx ACSR Conductor

Hardware for Earthwire :

1) P G Clamps suitable for Ground conductor

Line Erection with ASL

Check Survey and Towers Spotting.

Check survey using their own equipment for 110kV Plain terrain

1.The survey covers the scope as defined in Technical Specifications & As per volume -VI of Com...

Conducting drone survey of transmission lines for collection of data along with Aerial inspection of EHV line corridor using LIDAR method for measurements ofvertical, horizontal & ground clearances of...

Stringing of ACSR Conductor without allowing the conductor to touch the ground and without damaging the conductor as per specifications:

Paving out conductor from anchor to anchor normally spaced at ...

c) Ground wire- 7/3.15mm- (For Anchor Tower drop)

Erection of Transmission Line Towers:

A) Assembling & Erection of towers including tightening of bolts & nuts including loading, unloading at stores & site as per specifications.

1.The Bidders ...

B) Sorting of tower parts (made of fabricated angle iron)

C) Setting up of stub templates & aligning dismantling & transportation of templates from one location to another

D) Tack welding of bolts & nuts

Tower accessories :

1) Number Plates

2) Danger Boards

3) Circuit plate

4) Phase plate (Set of 3 No.)

i) Supplying and fixing GI angle iron 45 x 45x5mm (1Mtr length) with cleats, bolts nuts as per specification and fixing above 0.5 mts length each at inner and outer surface of tower to facilitate run...

ii) Supplying and fixing Barbed wire as per specification

Grounding of towers including cost of 40 mm dia 2.5 mm thick,class 'C' G.I. Pipe of 3 metres length as per specification with 50 X 6 mm GI Flats 3 metre long, salt, charcoal, including excavation char...

Dismantling Portion:

Note : 1) The Released materials shall be transported to the nearest Major Works Stores of KPTCL.

2)The rates quoted for releasing/dismantling shall also include the charges for ...

b) Releasing & re-stringing of existing Lynx ACSR Conductor :

Work-A: Lynx ACSR Conductor = (1.182Kms x 6 = 7.092)

d) Releasing & re-stringing of Existing Ground Wire:

Work-A: 1.182Kms

UG Cable Supply with ASL

64/110 kV (Earthed), 1C X 630 Sq mm stranded,

annealed, copper conductor, compacted circular,

conductor screen, cross linked polyethylene (XLPE)

insulation, core screen, semi-conducting water

3.3KV, 1CX 240 Sq mm 31.5Ka/sec earth continuity cable (sheath bonding cable) as per technical specification including laying charges

Outdoor type cable end termination suitable for 110 kV, 1C X 630 Sq mm copper conductor lead sheathed XLPE insulated cable as per technical specification.

Indoor type cable termination (plug in dry type) suitable for GIS modules confirming to IEC 62271-209 for 110 kV, 630 Sq mm, copper conductor, XLPE insulated cable as per technical specification.

Single phase Link box outdoor structure mounting type, with SVL suitable for 110 kV, 1200/1000/630 Sq mm UG cable including 300 Sq mm sheath bonding cable as per the technical specification.

Three phase cross bonding Link box with SVL including 240 Sq mm sheath bonding cable and 240/240 Sq mm co-axial cable as per technical specification suitable for 110 kV & 66 kV, 1000/630/400/240 Sq mm...

SURGE ARRESTOR : (Porcelain housing) metal oxide, Gapless type with with surge counter and terminal connectors suitable for Drake ACSR as per technical specifications

i) 96 kV, 10 KA, SM type -class ...

Fire wedge Terminal connectors to connect cable end termination to the Lynx / Drake ACSR conductor heavy type complete.

Drake ACSR Conductor

OPGW cable & Accessories:

a.48Fibre (DWSM) fibre optic cable

b. Suspension Clamp assembly for 48 Fibre OPGW

c. Tension Assembly for Dead End for 48 Fibre OPGW

d. Tension Fitting assembly for 48 Fibre OPGW including all accessories for joint box (splicing location)

e. Tension assembly-Double Tension pass through for 48 Fibre OPGW

f. Tension fitting assembly on suspension Tower for 48 Fibre OPGW including all accessories for joint box (splicing) location

g. Vibration damper for 48 Fibre OPGW

h. Down lead clamp assembly for fibre OPGW

i. Joint Box for 48 Fibre OPGW

Indoor type rack mounted 25 nos of rack mounted LIU each of 48F (to be housed in FODP) with FCPC coupling & pigtails

Fibre Optic Approach Cable:

i. 48 Fibre (DWSM) -Including installation hardware set for 48 fibre approach cable

ii. Media converter

Underground Fibres optic cable and accessories

a) 48 Fibre Dual Window Mono Mode (DWSM) UG Optical

Fibre Cable as per drawings and specifications in cable trunch parallel to 110KV cable inside PLB p...

b) Polyvinyl Lubricated Bond (PLB)pipe.OD 40mm

c) Jointing box for OPGW to optical fibre cable : 48 F

d) Line interface unit for optical fibre cable : 48 F

UG Cable Erection with ASL

UG Cable Surveying: Detailed survey along the route alignment by using Modern Survey equipment like DGPS / Total stations / Digital theodolites /GPS including profiling by using computer aided techniq...

Laying including Testing & Commissioning :

EHT single core XLPE copper cable in trefoil, tapping, fixing pipes for drain and gate crossing as per drawings & specification in trench pipes, ducts by pul...

Handling and making of cables end termination for EHV single core XLPE copper cable.

Erection of Single phase earth link boxes (3 Nos.) on to the cable mounting structure connecting earth leads with all lugs, fixtures, clamps bolts and nuts complete.

Erection of Three phase earth link box at Joint bay with connecting earth leads, all lugs, fixtures, clamps bolts and nuts complete (for Straight/Cross Bonds)

Erection of Surge Arrestors on the 110 KV cable end termination structure using suitable clamps ,fixtures,lugs bolts and nuts complete.with insulation resistance test,leakage,current test,surge counte...

Grounding of Equipment with 50x6 mm G.I Flat and connecting equipment to the earthmat/ground pit with all formation works like bending twisting, drilling of holes and welding inclusive of all material...

Cast iron pipe electrode of 100mm internal dia 13mm thick 2.75mtr long: Grounding of equipment by providing cast iron pipe of 100mm I.D. 13mm thickness 2.75 mtr long with 2 part clamp out of G.I.fla...

OPGW cable & Accessories:

a) Installation of 48 Fibre OPGW Fibre optic cable along with associated hardware fittings, Vibration dampers and Joint box for offline condition (Inclusive of conductor offl...

b) Installation of 48 Fibre (DWSM) approach cable along with hardware set which includes clips, Ties, Cleats, PLB HDPE etc.

c) Installation of FODP Indoor type

d) Installation of Joint Box for 48 Fibre OPGW

Underground Fibre Optic cable & Accessories :

a) Laying of 48 Fibrer Window Mono Mode (DWSM) UG Optical

Fibre Cableas per drawings and specifications in cable trunch parallel to 110KV cable inside...

b) Handling and making normal straight joint clousers for 48 fiber dual window mono mode (DWMN) OFC with all consumable at site complete.

c) Handling and making terminal joint branch for 48 fiber dual window mono mode (DWMN) OFC with all consumable at site complete.

d) Laying of PLB HDPE pipe in trenches for 400kV & 220kV

UG Cable Mandatory Spares with ASL

Outdoor type cable end termination suitable for 110 kV, 1C X 630 Sq mm copper conductor lead sheathed XLPE insulated cable as per technical specification.

Indoor type cable termination (plug in dry type) suitable for GIS modules confirming to IEC 62271- 209 for 110 kV, 630 Sq mm, copper conductor, XLPE insulated cable as per technical specification.

Link Boxes, single phase out door structure mounting type, with SVL including earthing cable as per technical specification.

Line Civil with ASL

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant I...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Station Civil with ASL

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specification, including setting out, construction of shoring, strutting, cost of blasting materials, barr...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height....

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm,aggregate cement rat...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6 per cent bitumen by weight

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixi...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding,...

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (5 Liquid :7 Powder) to the RCC surface like Roof, bathroom...

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on ...

Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomin...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 ...

Providing and laying 5mm thick Self levelling Epoxy Flooring for Residential, Commercial, Sports & Industrial purpose made of reputed brand applied at 1L/m2 on existing Concrete substrate of 25Mpa or ...

Providing and fixing false flooring as per KPTCL specfication including cost of structural steel, fasle flooring materials, labour charges, etc., complete as per direction of engineer in charge of wor...

Providing and fixing modular cable cealing system as per KPTCL specfication including cost of materials, labour charges, etc., complete as per direction of engineer in charge of work.

Double Leaf doorset - Insulated Fire rated doorset (FD 120) - Staircase / exit pathway application / Refuge area. Providing and fixing of ISI marked fire doors as per IS 3614:2021, 120 minutes fire ra...

Design, fabrication, supply, erection, testing and commissioning of 5 Tonne capacity EOT crane consisting of double girder box type construction, rail mounted end carraiges with long and cros...

Supply, Installation, Testing and commissioning of factory built floor mounted chilled water double skin type horizontal/vertical air handling units made of 25mm thick panels consisting of pre plasti...

Supply, installation, testing and commissioning of Motorized (ON-OFF Type) duct mounted GI volume control damper with enthalpy sensor and necessary control wire (minimum 1.5 sqmm) for integration with...

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, suppo...

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, suppo...

Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.

Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized ...

Design, supplying, erecting testing and commissioning of-Passenger /Bed-cum-passenger hospital lift with speed of 1mtr per second ,variable voltagevariable frequency drive, with r without machine room...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with atest ammendments and conveying to work site including loading and unloading at both destinations and r...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete.

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Supplying and fixing Hold fasts.

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional c...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work...

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...

Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less ...

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:893.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with stan...

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia,

Providing and fixing 100 mm sand cast Iron grating for gully trap.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings rrangement of approved quality and colour, weigh...

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber b...

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangment and making necessary holes for inlet, outlet and ov...

Providing and fixing PTMT stop cock of approved quality and colour 20 mm nominal bore, 89 mm long, weighing not less than 88 g

Providing and fixing PTMT stop cock of approved quality and colour 15 mm nominal bore, 86 mm long, weighing not less than 88 g

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...

Providing and fixing double action hydraulic floor spring of approved brand manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door we...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing and fixing factory made UPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance plus or minus 1mm), with wall thickness 2.0 mm (plus or minus 0.2 mm), ...

30mm thick factory made polyvinyl chloride (PVC) door shutter made of a uPVC hollow section of size 60x30mm and wall thickness 2 mm (plus or minus 0.2 mm), with inbuilt decorative moulding edging on o...

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be...

Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5mm (heavy type)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...

Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...

Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incha...

Providing and fixing Rainy dual capacity self-cleaning roof top rain water harvesting filter or equivalent filter of FL-500 specification suitable for a catchment area of about 500Sqm.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse sand) proportion cut to required shape, pattern with paper joi...

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...

Providing and fixing ball bearing for rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.

Extra for providing Manually operated Bevel Gear Box for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions...

Extra for providing 2 HP Mild Steel Auto Reverse Shutter Gearbox for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as pe...

Providing & Fixing in position Acoustical wall panelling with Integral Densified Square/Butt edged Fully Perforated Eco Friendly Lightweight Calcium Silicate panels/tiles with fabricated galvanised mi...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...

Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi...

Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...

Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000 ; 3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per...

SUBMERSIBLE CABLE

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest a...

PRESSURE GAUGE :

Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 100 mm

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm

NON - RETURN VALVE :

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm

ix) Control Panel BOARD-A:

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, A...

POWER CAPACITOR:

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning...

Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16...

GALVANISED MILD STEEL TUBES:

Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one e...

Erection elctrification & Commissioning works of pumpsets :

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supp...

Erection of panel board & meter board Unit :

Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipmentsincluding provi...

Main connections:

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board un...

Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...

Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 25mm including the cost of materials, labour charges, required tools and plants etc., complete. W...

Providing and applying primer coat with SS1 grade Bitume Emulsion on prepared surface of granular base includin cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanical ...

Providing and applying tack coat with RS1 Bituminous Emulsionusing emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom.

Providing and laying Bituminous Macadam with 100 tph capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.3% by weight of mix, tran...

Providing and laying Bituminous Concrete with 100 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.2 per cent of mix and f...

Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the ...

Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...

Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...

Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 100 x 75 x 65 mm

Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 135 x 75 x 65 mm

Supplying PVC flexible conduit pipe ....mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using N...

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth ...

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without...

Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. O...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/ Stone/ C.C wall...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switch

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Two Way Switch

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Three Way socket

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped Fan Regulator Two Module

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch.

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 12933 6/16A Universal Socket.

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 16A-25A 2 pole

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50HzAC with latest micro controller based, digital read out of percentage leakage curr...

Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.

Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply.

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. - 15" Sweep (450mm)

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ba...

Supplying wall mounting fan suitable to operate at single-phase 230v AC supply. 400 mm Sweep

Supplying of .. TR Invertor type split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed inverter compressor with air cooled condenser, latest R41...

Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C.

Supplying and installation of insulated refrigerant copper tubing of 5/8" and 3/8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testing oil and gas...

Extra for Fabrication supply and fixing of Stand fabricated using slotted angle /L angle of size 6mm x 50mm for mounting out door/indoor A.C. unit/ Batteries.

Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @ ...

Supplying of recess mounting non integrated type LED down light 18W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clA, LED of Power/COB with CCT...

Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clA, Power LEDs with CCT 6500 degree ...

Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clA, Power LEDs with CCT 6500 degree ...

INDUSTRIAL HIGHBAY LUMINAIRE ( INTEGRAL TYPE) Industrial medium/high bay luminaire with integral type Control gear, copper wound ballast, visor glass assembly and including supply of lamps. 100W, 240...

Supply and fixing Battery operated portable fluoresent lamps

Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v input and load variation from no load to full load, with over load protection, spike suppression, operati...

Fixing all types and all capacities of fluorescent /falseceiling/ spot light/CFL/LED fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twintwisted PVC insulated wires, required No...

Fixing a ceiling/wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary le...

Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...

Supplying and fixing of LED Bulkhead of 10W with IP65 protection and IK08 impact resistance suitable for surface and wall mounting applications.

UG Cable Civil with ASL

Earth work excavation for laying of UG cable in open ground and beneath the road surface in different strata of soil by mechanical means including deposition of earth on back with all leads and lif...

Earth work excavation for laying of UG cable in open ground and beneath the road surface in different strata of soil by mechanical means including deposition of earth on back with all leads and lif...

Earth work excavation for laying of UG cable in open ground and beneath the road surface in different strata of soil by mechanical means including deposition of earth on back with all leads and lif...

Earth work excavation for laying of UG cable in open ground and beneath the road surface in different strata of soil by mechanical means including deposition of earth on back with all leads and lif...

Dismantling of Flexible pavements and disposal of dismantled materials and stacking serviceable and unserviceable materials

separately By Mechanical Means By Bituminous course

Dismantling of Flexible pavements and disposal of dismantled materials and stacking serviceable and unserviceable materials

separately By Mechanical Means Granular course

Providing M-Sand : Supplying and filling in plinth, foundations / UG cable work with approved M-sand including watering, ramming, consolidating and dressing. The rate includes the cost of material, la...

Supplying and Providing pre cast RCC Protection Covers using M20 grade Concrete, steel of approved size/shape (as per the approved drawings) to be laid in UG cable works. The rate includes the cost of...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5...

Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work

Providing and laying of warning tape / Caution tape / detector tape for HDPE pipes of 200 mm wide, 300 micron thick, blue in colour confoming to relevant ISS with latest amendments with appurtenances....

Supplying and Providing Pre cast Cable Route/ Joint marker using M15 grade Concrete, MS rods of approved size/shape (as per the approved drawings) to be laid in UG cable works. The rate includes the c...

HDD method for laying of 110 kV and 66 kV UG Cables: Installation of 3 rows of HDPE pipes PE 80 PN6 of 160 mm dia using Horizontal directional drilling technique (HDD method) including preparing and s...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage

of mixed Material to work site, spreading in uniform layers with motor grader on p...

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

Prime Coat over WMM/WBM: Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0...

Dense Graded Bituminous Macadam Grading - II for traffic less than 20 MSA: Providing and laying Dense Graded Bituminous Macadam with 120 TPH capacity HMP batch type using crushed aggregates of specifi...

Tack coat on Granular surface treated with primer Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface.

Bituminous Concrete Grading II for traffic less than 20 MSA : Providing and laying Bituminous Concrete with 120 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, pre...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height....

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm,aggregate cement rat...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6 per cent bitumen by weight

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixi...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding,...

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (5 Liquid :7 Powder) to the RCC surface like Roof, bathroom...

Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomin...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 ...

Providing and fixing modular cable cealing system as per KPTCL specfication including cost of materials, labour charges, etc., complete as per direction of engineer in charge of work.

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with atest ammendments and conveying to work site including loading and unloading at both destinations and r...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional c...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...

Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings rrangement of approved quality and colour, weigh...

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangment and making necessary holes for inlet, outlet and ov...

Providing and fixing PTMT stop cock of approved quality and colour 20 mm nominal bore, 89 mm long, weighing not less than 88 g

Providing and fixing PTMT stop cock of approved quality and colour 15 mm nominal bore, 86 mm long, weighing not less than 88 g

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...

Providing and fixing double action hydraulic floor spring of approved brand manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door we...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing and fixing factory made UPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance plus or minus 1mm), with wall thickness 2.0 mm (plus or minus 0.2 mm), ...

30mm thick factory made polyvinyl chloride (PVC) door shutter made of a uPVC hollow section of size 60x30mm and wall thickness 2 mm (plus or minus 0.2 mm), with inbuilt decorative moulding edging on o...

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be...

Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5mm (heavy type)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...

Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...

Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incha...

Providing and fixing Rainy dual capacity self-cleaning roof top rain water harvesting filter or equivalent filter of FL-500 specification suitable for a catchment area of about 500Sqm.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...

Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi...

Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...

Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000 ; 3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per...

SUBMERSIBLE CABLE

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest a...

PRESSURE GAUGE :

Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 100 mm

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm

NON - RETURN VALVE :

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm

ix) Control Panel BOARD-A:

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, A...

POWER CAPACITOR:

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning...

Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16...

GALVANISED MILD STEEL TUBES:

Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one e...

Erection elctrification & Commissioning works of pumpsets :

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supp...

Erection of panel board & meter board Unit :

Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipmentsincluding provi...

Main connections:

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board un...

Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the ...

Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...

Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...

Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 100 x 75 x 65 mm

Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 135 x 75 x 65 mm

Supplying PVC flexible conduit pipe ....mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using N...

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth ...

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without...

Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. O...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switch

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Two Way Switch

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Three Way socket

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped Fan Regulator Two Module

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch.

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 12933 6/16A Universal Socket.

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 16A-25A 2 pole

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50HzAC with latest micro controller based, digital read out of percentage leakage curr...

Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. - 15" Sweep (450mm)

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ba...

Supplying wall mounting fan suitable to operate at single-phase 230v AC supply. 400 mm Sweep

Supplying of recess mounting non integrated type LED down light 18W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clA, LED of Power/COB with CCT...

Fixing all types and all capacities of fluorescent /falseceiling/ spot light/CFL/LED fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twintwisted PVC insulated wires, required No...

Fixing a ceiling/wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary le...

Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.

Providng and fixing pillar cock with high neck with 265mm extended body made of stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class Economy

Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete....

Supplying And Fixing Metal Fan Box with Round Hook.

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying & fixing of Porcelain fuse channel with cutout on existing wooden/panel using necessary nuts, bolts and washers. 100 A

Supplying of on load change over switches 4 poles,AC-23A Duty,415V,50Hz,AC Supply. With all accessories. (SMEnclosure Sheet Metal Execution) 100 A

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 63A 4 pole

Supplying, fixing and wiring 0 to 1500amps CT operated AC analog type Ammeter With out CT

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63A three phase 4wire whole current class-1 Accuracy Energy Meter.

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Bell Push

Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws.

Extra for supplying 4 mm thick white plastic plate andcovering for junction boxes of size ...... mm conduit using necessary machine screws. 80/90 mm.

Extra for supplying 4 mm thick white plastic plate andcovering for junction boxes of size ...... mm conduit using necessary machine screws.110 mm.

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Pendant Holder.

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. And M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. And M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...

Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. - 12" Sweep (300mm)

Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 4ft - 36/40 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 8...

Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 2ft - 9/10 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. ...

Supplying and Fixing of ---- mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wa...

Extra length of GI pipe of class B 19mm dia for down rod.

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit. The pit shoul...

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

GI/Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm copper plate

GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 3 mm Copper strip

Wet Mix Macadam (Plant Mix Method): Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanica...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Providing and fixing Heat Resistant Terrace Tiles (300mm x 300mm x 20mm) with SRI (solar refractive index) greater than 78, solar reflection greater than 0.70 and initial emittance greater than 0.75 o...

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corner...

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming ...

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windo...

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...

Providing and fixing aluminium tubular handle bar 32 mm outer dia,3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.: Polyester powder coated minimum thic...

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10mm

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windo...

Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of appr...

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. compl...

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...

Providing and fixing sliding window lock, ISI marked, transparent or dyed to required colour or shade, with necessary screws etc. Complete (Market rate)

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without...

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without...

Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using...

Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/ Telephone Socket

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 32-40 A 4 pole

Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable 2Pair

Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgi...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

Supplying, fixing and wiring 0 to 600Volts 96x96mm AC Voltmeter on existing panel/wood board. )

Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired.

Supplying, fixing and wiring rotary selector switch suitable for Ammeter.

Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer class 0.5 accurecy with Tape Wound

Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulat...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS-13947 - 125Amps

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

Supply of round/square recess/surface mounted rolling type LED Down light withLED square or round down light ----W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewir...

Supplying and Fixing of ---- mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wa...

Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements...

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires.

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant I...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Mandatory Spares GIS with ASL

For GIS common spares, maintenance and Testing Tools:

a) SF6 Gas pressure relief devices of each type

b) Pressure gauges (of each type) along with coupling device, gas pressure transmitter

c) Rubber Gaskets "O" Rings and seals for SF6 gas

d) Molecular filter for SF6 gas

e) Density Monitors for SF6 gas

f) All types of control valves for SF6 gas

g) SF6 gas(10% of total gas requirement subject to min of 30Kgs.)

g) 110 kV Bushing for connection to GIS duct

SF6 CIRCUIT BREAKERS:-GIS

a) 110 KV, 1600A Circuit Breaker interrupting chamber complete with all necessary apparatus.

b) Rubber Gaskets "O" Rings and seals

c) Trip coils with resistor

d) Closing coils with resistor

e) Relays, Power contactors, push buttons, timers & MCB etc.,

f) Closing assembly/valve

g) Trip assembly / valve

h) Pressure switches

i) Auxiliary switch assembly

j) Operation Counter

k) Rupture disc/diaphragm

l) Windoscope / Observing window

m) i) 110KV,1600A circuit Breaker operating mechanism, complete with all necessary connecting apparatus.

n) All types of coupling for SF6 gas(1 no. each type)

DISCONEECTORS & E/SWITCH GIS:

a) 110KV, 1250A disconnecting & maintenance earthing switch internal parts, complete with all necessary gaskets, mounting hardware etc.,

b) Operating mechanism of 110KV, 1250A Disconnecting switch, complete with all necessary connecting apparatus.

c) 110kV, 1250A, single phase high speed fault making Earthing switch Internal parts complete with all neccesary gaskets mounting hardware etc.,

d) Operating mechanism of 110KV, 1250A, high speed fault making Earthing switch, complete with all neccesary gaskets connecting apparatus.

e) Limit switch & Aux. switches

CURRENT TRANSFORMER-GIS:

a) 110KV Complete CT (1 No of each rating)

VOLTAGE TRANSFORMER-GIS:

110KV single phase VT complete with all gaskets and mounting hardware. (1 No of each rating)

SURGE ARRESTOR-GIS:

96 KV Complete L.A. including with Surge counter & accessories. (1 No of each)

EMERGENCY DG SETS:

a) Set of filters (Lubeoil/fuel/Air ckt) 1 set

b) Solenoid coil assembly

c) Self starter assembly

d) Lub-oil pressure safety control

e) High water temp. safety control

SPARES FOR RELAY AND PROTECTION PANELS:

a) All type of Numerical relays (1 no. each type)

b) Trip circuit supervision relay

c) Self reset trip relay -1 no. (each type)

d) Hand reset trip relay -1 no. (each type)

e) Timer relay -1 no. (each type)

f) DC supervision relays

g) Flag relays- 1 no. (each type)

h) Auxiliary relays -1 no. (each type)

Mandatory spares for Sub-Station Automation system:

a) Bay control unit with configuration software

b) Ethernet Switch of each type

c) Optical cable of longest length

Testing and Maintenance for GIS:

a) SF6 Gas filling, Filtering/evacuating & storage plant

b) Portable Partial Discharge monitoring for GIS (minimum 6 channels)

c) SF6 gas leak Detector

d) SF6 Gas Analyser Kit

MANDATORY SPARES FOR POWER TRANSFORMER:

a) Oil collecting bottle

II) Terminal connector clamps:

i)Suitable for 110kV class bushing to suit single Drake ACSR

ii)Suitable for 11kV class bushing to suit 2 No 50x6mm Copper flat

i)    Drain valve (80mm to 200mm size)

ii)    Top/Bottom Filter Valve (50mm to 100mm size)

iii)    Top/Middle/Bottom Oil sampling valve with plug (15 to 25 mm)

iv)    Header pipe valve

v)    Gate/Butterfly valves of various sizes ranging from 50mm to 200mm

d) Prismatic Gauge

e) Starters, contactors, relays

f) Pressure Relief Device (PRD or PRV)

g) Oil Surge relay

h) Buchholz relay

i) Tap position Indicator

j) Fixed and moving contacts for diverter switch

k) Fixed and moving contacts for selector switch

l) WTI with 2 contacts, 15 meters capillary length with built in CCU RTD and external remote indicator, range 0-150 deg C with SCADA/SAS compatibility

m) OTI with 2 contacts, 15 meters capillary length with built in CCU RTD and external remote indicator range 0-150 deg C with SCADA/SAS compatibility

n) PT 100 sensor along with probe of suitable length

Power Transformer:

20 MVA, 110/33-11 kV Transformer, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC ONAN/ONAF with fan control cubicle, RTCC ...

Nitrogen Injection fire extinguishing system-supplying, erection & incluidng civil Engineering works, soak pit etc., of the fire lighting system for Power Transformer below 100 MVA per technical spec...

Circuit Breaker :

SF6 Gas circuit breaker with Semi-Pneumatic / Pneumatic operated / Spring type operating mechanism, including mounting Structures arrangements with rigid, bi-metallic terminal conn...

Circuit Breaker :

SF6 Gas circuit breaker with Semi-Pneumatic / Pneumatic operated / Spring type operating mechanism, including mounting Structures arrangements with rigid, bi-metallic terminal conn...

Isolators : Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators:

A. 110KV, 1250A, 40KA Class Do...

ii)Upright mounting type without Earth switch. .(Live point height 4600mm)

iii)Upright mounting type without earth switch. (Live point height 6350mm)

Note:Terminal connectors for Isolators shall be as follows:

Rigid type suitable for Moose ACSR-

Work-B:27 Nos, Work-E: 27no...

C)11 kV Isolators:

i) 11KV isolators, Double Break 400A, 25KA capacity with rigid bi-metallic terminal connectors suitable for coyote ACSR for Capacitor Bank

ii) 11 kV isolator, single break 400 A, 25 KA capacity with Roaster switch, with rigid bimetallic terminal connector suitable for coyote ACSR.

CURRENT TRANSFORMER : Current transformers including marshalling boxes, Single phase,oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose ACSR conductor as per technica...

CURRENT TRANSFORMER : Current transformers including marshalling boxes, Single phase,oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose ACSR conductor as per technica...

CURRENT TRANSFORMER : Current transformers including marshalling boxes, Single phase,oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose ACSR conductor as per technica...

11kV Class, 25kA, NCT of ratio 1200-800/1-1-1A for REFR Protection (of similar rating and ratio as that of Incomer of 11kV Switchgear) with terminal connector suitable for 2 Nos. of Copper flats as p...

VOLTAGE TRANSFORMER : Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose ACSR with marshalling box KIOSK as per technical specifications

110 kV class 1...

SURGE ARRESTOR : (Porcelain housing) metal oxide, Gapless type with rigid bimetallic connectors suitable for Moose ACSR as per technical specifications

i) 96 kV, 10 KA, SM type -For overhead Lines

ii) 96 kV, 10 KA, SM type-For Transformers

iii) 9 kV, 10 KA with connector and clamp

Work-B: Additional 6nos for LV side of transformers

Capacitor Bank: Design, Engineering , supply, erection, testing & commissioning of 2.9 MVAR, 12.1KV Capacitor Bank, star connected, Double Bank with internal fuses, terminal connectors, with suitable ...

Control and Relay Panel complete as per specifications:

Simplex type control and relay panels complete as per specifications.

1) All the C&R panels and associated panels shall be of one and sam...

Simplex type control and relay panels complete as per specifications.

ii) For 110kV Transmission line

Total Weight of of Station structures , Mounting Structures , Lightning Mast & street lighting structure fabricated out of galvanized mild steel.

Note : Rate to be quoted on t basis.

For detailed qua...

Total Weight of supply of Bolts & nuts of Station structures , Mounting Structures , Lightning Mast & street lighting.

Note : Rate to be quoted on t basis.

For detailed quantity break up refer techno ...

11 kV ODS and take off structure:

Supplying of Double pole structure with 9.5 Mts. RCC poles WL 300 Kgs for mounting 11 kV 400 A Roaster Isolators and 9 kV, 10 KA surge arrestor (3 No) complete set ...

BUS BAR FORMATION :

B)Rigid bus with taps & clamps:

i) Aluminium pipe conforming to 6340WP of IS - 5082 / 1969 (BS I600-Sch. 40) of following nominal diameter a) 75mm.

b) 63mm size connecting isolator to vertical tap

ii) Straight taps suitable for 63mm Aluminium tube (BS-1600) of 1750mm vertical height for vertical portion & cross bus on 110KV side with rounded off end.

iii) A) Post insulator clamps suitable for 75 mm Aluminium pipe & Post insulator solid core type - 110kV side

b)Expansion Type

iv) Corona Bell Suitable for Aluminium Pipe of size 75mm on 110 kV

v)End Cap for 63 mm

Post insulator Solid core Insulator 110 kV, 1 Unit/stack

C Type wedge connector suitable for Drake -Drake (Bus)

C Type wedge connector suitable for Moose - Panther (Line)

Note: Rate of Moose to Drake is considered

C Type wedge connector suitable for Moose -lynx Line

Note: Rate of Moose to Drake is considered

C Type wedge connector suitable for Drake - Panther (Line)

Note: Rate of Panther to Moose is considered

Post insulator clamp suitable for Moose ACSR and 110kV Solid core insulator.

Post insulator clamp suitable for Drake ACSR and 110kV Solid core insulator.

Auxiliary Transformer :

Supply of Station Auxiliary Transformer-copper winding with oil, outdoor type, 100 kVA, 11 kV/433 V, 3 Ph, Vector group Dyn 11 off load tap changer(5 taps) with step voltage ...

Supplying of DP structure with 9.5 mtr RCC poles, 11 kV 400 A double break isolators, 9 kV, 10 KA surge arrestor (3 No), H-Frame along with DOLO/HG fuse unit, LTprotection kit/LTD box, LT Trivector me...

LTAC Panel (Indoor), 415 V as per technical specification comprising of voltmeter and ammeter, 1 I/C MCCB 200A + 2 nos. 3 Phase 63A O/G SFU, + 2 nos. 3 Phase 32A O/G SFU 100A ,6 nos. 3 Phase 16A SFU e...

AC Distribution box (outdoor) Single front type with 6 terminals 1200 x 1350 x 300 mm one I/C of 100 A MCCB 20 KA+ 6 O/G 16 A MCB +1 O/G of 100 A HRC Fuse panel 415 V outdoor type:

For Work-A : 750...

b) 110V, 200AH Battery set (Plante/Grid/Nickel Cadmium Type)with accessories as per specification

Battery charger- suitable for 1 X 110 V, 200 AH, Battery set (Plante/Grid/Nickel Cadmium Type)15 A float and 30 A boost (with float and boost battery charger as per technical specification).

LT DC Distribution panel (Indoor) as per Technical specification comprising of Earth fault indicator, Indication circuit for AC main failure, 1 No 100A SFU for IC + 12 nos., 32A SFU for OG etc,. compl...

LT Power armoured UG cable as per specification:

a) 1.1 kV class 4 X 95 Sq mm L T Aluminium Cable with glands/lugs/ferrules.

1.1 kV Grade PVC Insulated armoured copper control cables of sizes,with Lugs/Ferrules/Gland as per technical specifications.

i) 19C x 2.5 Sq.mm

ii) 10C x 2.5 Sq.mm

iii) 4C x 6 Sq.mm

iv) 4C x 2.5 Sq.mm

v) 2C x 6 Sq.mm

vi) 2C x 2.5 Sq.mm

b) 1.1 kV class 4 X 25 Sq mm Copper Cable with glands/lugs/ferrules.

c) 1.1 kV class 4 X 10 Sq mm Copper Cable with glands/lugs/ferrules.

11KV U.G. Cable with the required cable terminations at both ends as per specifications.

i) One run of 11kV, XLPE 95 sq.mm Al., 3 core cable -(to be run for Auxiliary Transformers from 11KV switch ...

ii) 11KV XLPE cable, 1000Sq. mm. Aluminium cable from 110/11KV transformers to 11KV Switchgear.

iii) 11KV XLPE cable, 240Sq. mm. Aluminium cable 3 Core to be run from 11KV Switchgear to 11kV Capacitor Bank and 11kV take off DP Structure.

Cable termination kits:

iv) Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable ( Indoor type )

v) Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable (Out door type)

vi)Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable ( Indoor type )

vii)Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable (Out door type)

viii)Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable ( Indoor type )

ix)Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable (Out door type)

FIRE FIGHTING EQUIPMENTS WITH NECESSARY MOUNTING STANDS:

i)Foam type extinguisher (Mechanical) 50 Ltr. capacity

ii) Foam type extinguisher (Mechanical) 9 Ltr. capacity

iii) Water type (gas pressure type) 9 Ltr. capacity

iv) Carbon di-oxide type 4.5 kg Capacity

v) Sand type G.I Buckets 15 Ltr. Capacity

vi)Steel stands for above to have 4 buckets to each stand.

Maintenance Tools and Plant:

1) Portable (mobile) oil pumps (1/2 HP Air pump 500 to 1000 gallons)

2) Telescopic ladder Aluminium 6 Mtr. Height

3 )Ring spanner set

4) Tube spanner set

5) Pipe wrench 24 inch

6) Pipe wrench 18 inch.

7) Hydraulic crimping tools up to 1000 Sq.mm

8) Rubber hand gloves (15 kV tested)

9) Rechargeable 5W LED hand torch

10) Insulated cutting plier 12 inch size

11) Insulated cutting plier 8 inch size

12) Line live tester AC/DC 500 V

13) Screw driver 18"

14) Screw driver 12"

15) Hammer 8 lbs

16) Hammer 2 lbs

17) Chain pulley block 5 ton capacity

18) Hydraulic jack 5T capacity

19) Pipe derrick suitable for lifting 3 MT and lift of 6 Mtr. Height

21) Box spanners

22) Transil oil di-electric break down (with 2.5 mm gap 0-60 kV) Tester.

23) Insulation megger 2.5 - 5 kV

24) Insulation megger 500 V

25) SF-6 gas leak Detector

26)Multimeter electromechanical

27)Multimeter Electronic

29)DC Voltmeter range -5V to + 5V

30)Hydrometer syring suitable for vent holes

31)Specific gravity correction chart

32)Thermometer with wall mounting holder

33) Rubber appron

35) Protective goggle

36) Acid resisting jars (4 pint capacity)

37) Rubber shoes knee height

38) Glass funnel

39)Grounding sticks extendable upto 18 ft

40) Wall mounting type holder for hydrometer

MISCELLANOUS ITEMS

i) Rubber mats 1000 mm x 1000 mm x 10 mm size

ii) First aid box.

iii) Shock treatment charts, hard board, liminated with coloured pictures & literature both in Kannada & English.

iv) Water filter / Water purifier : Wall mounting type (Aqua-guard type).

v) Sub-station name board duly painted.

vi) Fixograph of size 1.5m x 2.5m with English / Kannada alphabets.

vii) Brass cupboard lock 6 levers (best make of approved quality) 75 mm size

viii) Danger board(prohibited) with support structure including fixing in front of the gate

ix) Equipment name plates and earthing name plates including fixing at outdoor yard

Furniture for Control Room Staff and maintenance staff

i) Steel Almirahs 6 1/2 feet

ii) Steel Almirahs 6 1/2 feet with glass panel doors

iii) Officers tables

iv) Steel Slotted angle rack (big Size)

v) Steel Slotted angle rack (small Size)

vi) Steel dustbins

vii) Executive revolving chairs

viii) ‘S’ Type Arm Chairs

ix) Steel folding Chairs

Equipments for establishing SCADA Communication :

i) Remote Terminal Unit (RTU)

ii) Data Concentrator Unit (DCU)

iii) 2 kVA online UPS (230 V AC 1 phase 50 Hz) with Battery set

iv) Multi Functional Transducer (MFT) 0.2S class

v) Opto Coupler (220 or 110V DC)

Cables -Supplying

i) Current Cables-Copper Core with c/s 4.0 sq.mm Multistrand 4 Core

ii) Voltage Cables-Copper Core with c/s 2.5 sq.mm Multistrand 4 Core

iii) Signal Cables-armoured Copper Core with c/s 0.5 sq.mm Multi strand 10 Core

iv) Control Cables- Copper Core with c/s 1.5 sq.mm Multi strand 10 Core

v) Supply Cables-Copper Core with c/s 4.0 sq.mm Multi strand 3 Core for AC input to UPS & UPS to RTU,conforming to KPTCL specifications.

vi)Supply Cables-Copper Core with c/s 32.0 sq.mm Multi strand for Battery conforming to KPTCL specifications.

Note : Satellite Communication required will be arranged by SLDC.

STATION & YARD LIGHTING (OUTDOOR)/Lightning Protection: (To be designed, assessed & quoted by the bidder)

Fabricated structures of 5 meter height with peak with provision for lightning finials string...

ii) PVC Insulated Copper Control Cables : 1.1 KV PVC insulated Copper Control Cable with glands/Lugs/ Ferrules etc as per technical specification.

iii) Supply & Fixing of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injectio...

Station Erection

Note: For detailed quantity break up of each item refer techno commercial sheets.

Power Transformer:

(i) 20 MVA, 110/33-11kV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transform...

Circuit Breaker :

SF6 Gas circuit breaker with Semi-Pneumatic / Pneumatic operated / Spring type operating mechanism, including mounting Structures arrangements with rigid, bi-metallic terminal conn...

Circuit Breaker :

SF6 Gas circuit breaker with Semi-Pneumatic / Pneumatic operated / Spring type operating mechanism, including mounting Structures arrangements with rigid, bi-metallic terminal conn...

Isolators : Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators:

A. 110KV, 1250A, 40KA Class D...

ii) Upright mounting type without Earth switch(Live point height 4600mm)

iii) Upright mounting type without earth switch. (Live point height 6350mm)

B.11 kV Isolators:

i)11KV isolators, Double Break 400A, 25KA capacity with rigid bi-metallic terminal connectors suitable for coyote ACSR for Capacitor Bank

ii) 11 kV isolator, single break 400 A, 25 KA capacity with Roaster switch, with rigid bimetallic terminal connector suitable for coyote ACSR.

CURRENT TRANSFORMER : Current transformers including marshalling boxes, Single phase,oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose ACSR conductor

i) 110 kV class...

ii) 110KV Class, 40KA, CT of ratio 600-400/1-1-1 A for Tr. Lines.

Core - 1 : Vk-1100 V, Rct 5 ohm at 500/1A, Accuracy class PS-Dist/Dif

Core- 2 : 10 VA, Accuracy class 0.2s- Metering

ii) 110KV Class, 40KA, CT of ratio 400-200/1-1-1 A for Tr. Lines.

Core - 1 : Vk-1100 V, Rct 5 ohm at 500/1A, Accuracy class PS-Dist/Dif

Core- 2 : 10 VA, Accuracy class 0.2s- Metering

11kV Class, 25kA, NCT of ratio 1200-800/1-1-1A for REFR Protection (of similar rating and ratio as that of Incomer of 11kV Switchgear) with terminal connector suitable for 2 Nos of 75mmx6mm Copper fla...

VOLTAGE TRANSFORMER : Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose ACSR with marshalling box KIOSK as per technical specifications

110 kV class 1...

SURGE ARRESTOR : (Porcelain housing) metal oxide, Gapless type with rigid bimetallic connectors suitable for Moose ACSR.

i) 96 kV, 10 KA, SM type -For overhead Lines

ii) 96 kV, 10 KA, SM type-For Transformers

iii) 9 kV, 10 KA with connector and clamp

Control and Relay Panel complete as per specifications:

Simplex type control and relay panels complete as per specifications.

1) All the C&R panels and associated panels shall be of one and sam...

Simplex type control and relay panels complete as per specifications.

ii) For 110kV Transmission line

Erection of Station structures,Mounting Structure,Lightning Mast & street lighting including Bolts & nuts

Note : Rate to be quoted on t basis.

For detailed quantity break up refer techno commercial sh...

11 kV ODS and take of structure

Erection of Double pole structure with 9.5 Mts. RCC poles WL 300 Kgs for mounting 11 kV 400 A Roaster Isolators and 9 kV, 10 KA surge arrestor (3 No) complete set .

BUS BAR FORMATION :

Formation of Main/CrossBus with Single Moose/Drake Conductor.

Note: The scope also includes installing insulator strings complete with necessary Hardwares and stringing of the co...

Erection of Tubular bus including fixing of clamp, connector jumper, corona ring etc, Complete as per instruction of Engineer in Charge

i) Aluminium pipe conforming to 6340WP of IS - 5082 / 1969 (BS I...

b) 63mm size connecting isolator to vertical tap

Post insulator Solid core Insulator 110 kV, 1 Unit/stack

Auxiliary Transformer

Erection of Station Auxiliary Transformer-copper winding with oil, outdoor type, 100 kVA, 11 kV/433 V, 3 Ph, Vector group Dyn 11 off load tap changer(5 taps) with step voltag...

Erection of DP structure with 9.5 mtr RCC poles, 11 kV 400 A double break isolators, 9 kV, 10 KA surge arrestor (3 No), H-Frame along with DOLO/HG fuse unit, LTprotection kit/LTD box, LT Trivector met...

LTAC Panel (Indoor), 415 V as per technical

specification comprising of voltmeter and ammeter,

For Work-A: 2 I/C ACB 200A + 4 O/G SFU 63A + 12 O/G SFU 32A + 1 B/C SFU 200A + 1DG C/O Switch 300A etc.

AC Distribution box (outdoor) Single front type with 6 terminals 1200 x 1350 x 300 mm one I/C of 100 A MCCB 20 KA+ 6 O/G 16 A MCB +1 O/G of 100 A HRC Fuse panel 415 V outdoor type:

Work-A : 750x135...

b) 110V, 200AH Battery set (Plante/Grid/Nickel Cadmium Type)with accessories as per specification

Battery charger- suitable for 1 X 110 V, 200 AH, Battery set (Plante/Grid/Nickel Cadmium Type)15 A float and 30 A boost (with float and boost battery charger as per technical specification).

LT DC Distribution panel (Indoor) as per Technical specification comprising of Earth fault indicator, Indication circuit for AC main failure, 1 No 100A SFU for IC + 12 nos., 32A SFU for OG etc,. compl...

LT Power armoured UG cable as per specification:

a) 1.1 kV class 4 X 95 Sq mm L T Aluminium Cable with glands/lugs/ferrules.

1.1 kV Grade PVC Insulated armoured copper control cables of sizes,with Lugs/Ferrules/Gland as per technical specifications.

i) 19C x 2.5 Sq.mm

ii) 10C x 2.5 Sq.mm

iii) 4C x 6 Sq.mm

iv) 4C x 2.5 Sq.mm

v) 2C x 6 Sq.mm

vi) 2C x 2.5 Sq.mm

b) 1.1 kV class 4 X 25 Sq mm Copper Cable with glands/lugs/ferrules.

c) 1.1 kV class 4 X 10 Sq mm Copper Cable with glands/lugs/ferrules.

11kV Switchgear

B) 11kV, 25kA, Metal Clad VCB Switchgear (1600A for Incomer and 1250A for feeders), outdoor type, each comprising of 2IC+12F+1BC+4CB+1AP (Remote Announciation cum Control panel) with ...

11KV U.G. Cable with the required cable terminations at both ends as per specifications.

i) One run of 11kV, XLPE 95 sq.mm Al., 3 core cable - (to be run for Auxiliary Transformers from 11KV switch...

ii) 11KV XLPE cable, 1000Sq. mm. Aluminium cable from 110/11KV transformers to 11KV Switchgear.

iii) 11KV XLPE cable, 240Sq. mm. Aluminium cable 3 Core to be run from 11KV Switchgear to 11kV take off DP Structure.

iv) Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable ( Indoor type )

v) Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable (Out door type)

vi)Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable ( Indoor type )

vii)Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable (Out door type)

viii)Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable ( Indoor type )

ix)Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable (Out door type)

Equipments for establishing SCADA Communication :

i) Remote Terminal Unit (RTU)

ii) Data Concentrator Unit (DCU)

iii) 2 kVA online UPS (230 V AC 1 phase 50 Hz) with Battery set

iv) Multi Functional Transducer (MFT) 0.2S class

v) Opto Coupler (220 or 110V DC)

vi) Integration of RTU, DCU and UPS with field equipments

Cables -Laying

i) Current Cables-Copper Core with c/s 4.0 sq.mm Multistrand 4 Core

ii) Voltage Cables-Copper Core with c/s 2.5 sq.mm Multistrand 4 Core

iii) Signal Cables-armoured Copper Core with c/s 0.5 sq.mm Multi strand 10 Core

iv) Control Cables- Copper Core with c/s 1.5 sq.mm Multi strand 10 Core

v) Supply Cables-Copper Core with c/s 4.0 sq.mm Multi strand 3 Core for AC input to UPS & UPS to RTU,conforming to KPTCL specifications.

vi)Supply Cables-Copper Core with c/s 32.0 sq.mm Multi strand for Battery conforming to KPTCL specifications.

Note : Satellite Communication required will be arranged by SLDC.

STATION & YARD LIGHTING (OUTDOOR):

PVC Insulated Copper Control Cables : 1.1 KV PVC insulated Copper Control Cable with glands/Lugs/ Ferrules etc as per technical specification

Releasing of DCDB Indoor Type

Earth Mat Formation:

a) Supplying and laying MS.Flat 75 x 12 mm flat welding and applying ACB paint to welded portion as per drawing/standard if required (all other materials to be supplied by contra...

b) Grounding of equipments with 75 x 12 mm G I flat and connecting equipments to the earth mat/ground pit including all connected works with all materials supplied by the contractor.

c) Grounding of equipments with 50 x 6 mm G I flat and connecting equipments to the earth mat/ground pit including all connected works with all materials supplied by the contractor.

Providing MS Round rods 40mm dia, 1.075mtr. Long.

Providing C.I. Pipe of 100mm ID 13mm thick 2.75 mtr. long with 2 part GI Flat 50x6mm clamp welded allround the pipe etc., including cost of excavation (all materials supplied by contractor)

Supplying and fixing 450mm dia x 450mm height 1.5" to 2" Hume pipe collars for earth pits.

Providing deep bore earthing: Sinking bore of 150mm clear dia using fast rig including fixing of 40mm dia MS rod, including jointing the pipes as per KPTCL standards & providing sodium bentonite treat...

b) 40mm dia M S rod

c) Bentonite clay (for 50Nos Deep Bore & 41Nos CI Pipes)

d) GI flats for joining two rods by welding to obtain continuos length (Including Material labour etc,. Complete)

Grand Total weight of Tower parts- High Tensile Steel

Note:1. Rate to be quoted on per tonne Basis

Grand Total weight of Tower parts- Mild Steel

Note:1. Rate to be quoted on per tonne Basis

Grand Total weight of Bolts , Nuts& Washers

Note:1. Rate to be quoted on per tonne Basis.

Tower accessories :

1) Number Plates

2) Danger Boards

3) Circuit plate

4) Phase plate (Set of 3 No.)

5) Earth bond 300 mm long

6) Earth bond 450 mm long

Conductor & Earth wire :

a. Lynx ACSR Conductor with 1.5% sag

b. Panther ACSR Conductor with 1.5% sag

C. Ground wire- 7/3.15mm

I) Insulator strings and clamps for Lynx ACSR conductor with Hardwares and Arcing Horns as per technical specifications

NOTE: All the Insulator strings and hardware fittings quoted by the bidder shall...

B. Suspension insulator strings consisting of any one of the following:

a.Suspension Insulator string consisting of 1X7nos. of 110kV, 90kN Disc insulators

I) Insulator strings and clamps for Panther ACSR conductor with Hardwares and Arcing Horns as per technical specifications

NOTE: All the Insulator strings and hardware fittings quoted by the bidder sh...

B. Suspension insulator strings consisting of any one of the following:

a.Suspension Insulator string consisting of 1X7nos. of 110kV, 90kN Disc insulators

I.Insulator Hardwares & Clamps suitable for Lynx ACSR Conductor as per Technical Specification:

i) Single Tension Clamp with hardware and arcing horn suitable for 1x8nos. of 110kV, 90kN insulator to...

ii)Double Tension Clamp with hardware and arcing horn suitable for 2x8nos. of 110kV, 90kN insulator to suit Lynx ACSR.

iii) Single Suspension Clamp with hardware and arcing horn suitable for 1x7nos. of 110kV, 90kN insulator to suit Lynx ACSR.

II.Insulator Hardwares & Clamps suitable for Panther ACSR Conductor as per Technical Specification:

i) Single Tension Clamp with hardware and arcing horn suitable for 1x8nos. of 110kV, 90kN insulato...

ii)Double Tension Clamp with hardware and arcing horn suitable for 2x8nos. of 110kV, 90kN insulator to suit Panther ACSR.

iii) Single Suspension Clamp with hardware and arcing horn suitable for 1x7nos. of 110kV, 90kN insulator to suit Panther ACSR.

iv) Double Suspension Clamp with hardware and arcing horn suitable for 2x7nos. of 110kV, 90kN insulator to suit Panther ACSR.

Accessories for Lynx ACSR Conductor :

b) Pre formed armour rods for Lynx ACSR Conductor

c) Repair sleeves for Lynx ACSR Conductor

d) P G Clamps for Lynx ACSR Conductor

e) Vibration dampers for Lynx ACSR Conductor

Accessories for Panther ACSR Conductor :

b) Pre formed armour rods for Panther ACSR Conductor

c) Repair sleeves for Panther ACSR Conductor

d) P G Clamps for Panther ACSR Conductor

e) Vibration dampers for Panther ACSR Conductor

Hardware for Earthwire :

2) Repair sleeves

3) P G Clamps suitable for Ground conductor

4) Single Tension clamps ( bolted type)

5) Single Suspension clamps ( bolted type)

Check Survey and Towers Spotting.

Check survey using their own equipment for 110kV Plain terrain

1.The survey covers the scope as defined in Technical Specifications & As per volume -VI of Com...

Conducting drone survey of transmission lines for collection of data along with Aerial inspection of EHV line corridor using LIDAR method for measurements ofvertical, horizontal & ground clearances of...

Stringing of ACSR Conductor without allowing the conductor to touch the ground and without damaging the conductor as per specifications:

Paving out conductor from anchor to anchor normally spaced at ...

Stringing of ACSR Conductor without allowing the conductor to touch the ground and without damaging the conductor as per specifications:

Paving out conductor from anchor to anchor normally spaced at ...

Stringing of ACSR Conductor without allowing the conductor to touch the ground and without damaging the conductor as per specifications:

Paving out conductor from anchor to anchor normally spaced at ...

d) Ground wire- 7/3.15mm- (For Anchor Tower drop)

Erection of Transmission Line Towers:

A) Assembling & Erection of towers including tightening of bolts & nuts including loading, unloading at stores & site as per specifications.

1.The Bidders ...

B) Sorting of tower parts (made of fabricated angle iron)

C) Setting up of stub templates & aligning dismantling & transportation of templates from one location to another

D) Tack welding of bolts & nuts

Tower accessories :

1) Number Plates

2) Danger Boards

3) Circuit plate

4) Phase plate (Set of 3 No.)

i) Supplying and fixing GI angle iron 45 x 45x5mm (1Mtr length) with cleats, bolts nuts as per specification and fixing above 0.5 mts length each at inner and outer surface of tower to facilitate run...

ii) Supplying and fixing Barbed wire as per specification

Grounding of towers including cost of 40 mm dia 2.5 mm thick,class 'C' G.I. Pipe of 3 metres length as per specification with 50 X 6 mm GI Flats 3 metre long, salt, charcoal, including excavation char...

Dismantling Portion:

Note : 1) The Released materials shall be transported to the nearest Major Works Stores of KPTCL.

2)The rates quoted for releasing/dismantling shall also include the charges for ...

b) Releasing & re-stringing of existing Lynx ACSR Conductor :

Work-C: Lynx ACSR Conductor near proposed LILO tower = (0.52Kms x 6 = 6.24Kms)

Work-E: Lynx ACSR Conductor for re-arrangement of 110 kv L...

c) Releasing & re-stringing of existing Panther ACSR Conductor :

Work B: Panther ACSR conductor for re-arrangement of 110 kv LILO line(70+190=260mts (from proposed 110kV Hosur-Inchal line)

d) Releasing & re-stringing of Existing Ground Wire:

Work-B: Ground wire for re-arrangement of 110 kv LILO line (70+190=260mts)

Work-C: = 0.52Kms

Work-E: Ground wire for re-arrangement of 110 kv LILO...

Mandatory Spares

Circuit Breaker (CB)

Closing coil with resistor (For one Complete Circuit Breaker)

a) for 145KV CB

Tripping coil with resistor (For one Complete Circuit Breaker)

a) for 145KV CB

Terminal Pad (For one Complete Circuit Breaker)

a) for 145KV CB

Terminal Connector (For one Complete Circuit Breaker)

a) for 145KV CB

SF6 Gas (40% of total gas Qty. for Sub-Station Work-B,C,D & E)

Copper Contract fingers male & female (For one Complete Isolator)

a) for 123KV Class

Terminal Connector (For one Complete Isolator)

a) for 123KV Class

Terminal Pad (For one Complete Isolator)

a) for 123KV Class