Procurement of instruments

Lab Instruments:

Analytical Semi Micro Balance-Conformity to IS 9281, Part - III, 1981 specification with latest amendments there on. Analytical balance, 4 decimal sensitivity, integral draft shield, compact body of high durability with a spacious weighing chamber and quality exterior case. Accuracy supported internal calibration. Easy setting best fit to weighing application expanded piece counting function, Specific gravity mode, Formulation mode, Stability maintenance by full digital control i.e Digital, LCD, LED Display, Conformation to International Standards, Stainless Steel Pan 90 mm, Capacity - 220g, Accuracy-0.1 mg, Weighing Mechanism- Uniblock, Monoblock, Doors open wide in 3 directions, Level gauge provision at easiest visual position, Optional battery operation, NABL calibration certificate as per ISO 17025, 2017 with latest amendments there on, Power supply AC 220V, 50-60 Hz, Warranty min - 1 year.

Thermocouple Thermometer Digital with RTD or K type probe with cable(Digital)-IS 7358 , 1984 specification with latest amendments there on, Highly accurate thermometer precise measurements, Capacity Max. 600°C, 3½’’ digit liquid crystal display LCD or LED with a maximum reading of 1999, Operating Environment - 0°C to 50°C i.e.32°F to 122°F, less than 80% Relative Humidity, Storage Environment - minus 20°C to 60°C i.e. -4°F to 140°F, less than 80% R.H. with battery operated meter, Accuracy 1°C- Stated accuracy at 23°C ±5°C, less than 75% R.H. Battery - 1.5V x 4pcs AAA size, Dimensions- L241.3 mmX W157.98 mm XH76.2mm i.e. 9.5 X 6.22 X3 in, RTD or K type thermocouple OD-6mm, Length – 3 meter cable ,plug and socket. NABL calibration certificate. Warranty 1 year.

Microcontroller based Electrical Conductivity meter -Digital 4 ½ inch LED or LCD display, bench model, different measuring ranges 0-20, 0-200, 0-2000, 0-20000, 0-200000 micro mho per cm, with automatic temperature compensation arrangement, Resolution-0.01micro S, accuracy ± 1% mid scale, conductivity cell of 0.1 cell constant, with holder and clamp, TDS range-0-200ppt, AC operated. calibration up to 3 points. warranty min 1 year.

Microcontroller based pH meter -Digital, 4 ½’’ LED or LCD display, bench model, range 0-14 pH, accuracy - sensitivity 0.01 pH, with automatic temperature compensation with combined glass electrode, electrode holder, 3 point calibration for pH, MV-0 to 1999 MV, Slope-90% to 110%, 220V AC operated. warranty min 1 year.

Turbidity meter -Digital, Range 0-2000 NTU, Resolution 0.01 NTU for 0 - 100 NTU, 0.1 NTU for 100 - 1000 NTU, 1 NTU for 1000-2000, Repeatability ± 3%, Source-Projector lamp, Detector- Photodiode., calibration up to 3 points, including sample vials. Warranty min. -1 year.

Flame Photometer -Digital, dual channel - simultaneous display for both Na & K, capable of measuring 4 elements with single aspiration i.e. Na, K, Li and Ca with filters for Na, K, Li and Ca, 3 digit, Full scale sensitivity – Na-2 ppm, K-1 ppm, Li-1 ppm and Ca-30 ppm, operated on LPG supply, with compressor. warranty min 1 year.

THE I.L.E.CO.

THE PRECISION SCIENTIFIC CO CBE

Microtek Technologies

THE PRECISION SCIENTIFIC CO CBE

Shriram Enterprises Pvt. Ltd.,