Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.0 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹17.1 L+₹2.1 L (14.3%)Rejected-Finance | L2 | Rejected-Finance Quoted amount is more than L1 | |
| 3 | L3₹18.6 L+₹3.6 L (24.2%)Rejected-Finance 119 LANE NO 4 DAYA NAND NAGAR LAWRENCE ROAD AMRITSAR PUNJAB 143001 | AMRITSAR | PUNJAB | 143001 | L3 | Rejected-Finance Quoted amount is more than L1 |
Tender Value
₹14.1 L
EMD Value
₹28,300
Closing Date
26 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Major S Rakesh
Garrison Engineer Ranchi, 7th Club Road Ranchi, PIN-834001
SPL REPAIR TO BLDG NO T-87 (MAIN OFFICE) OF ARO RANCHI, BLDG NO T-47 (JCO/OR MD ACCN) AT REZANGALA LINE UNDER GE RANCHI
2022_MES_533370_1
8200/1421/E8
Open Tender
Civil Works
Item Rate
180 days
Ranchi
Class E cat a(i)
6 documents required · 6 mandatory
₹500
GE Ranchi
₹28,300
Yes
22 Aug 2022
24 Jun 2022
28 Jul 2022
25 Jun 2022
26 Jul 2022
8 Jul 2022
Amount
Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges as in roof covering.
Dismantling timber scantling 40 sqcm and over in section in any position in framed work, complete all as specified and directed.
Dismantling of wall and ceiling board any thickness/description including cover fillet, complete all as specified and directed.
Dismantaling floor, hearth or wall tiling, including cement mortar bedding (but not backing) removing serviciable tile to store & rubbish off the permisses, complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15cm thick (below or above ground level), complete all as specified and directed.
Demolition of cement concrete (reinforced) any description and in any position, complete all as specified and directed.
Demolition of brick wk masonry built in cement mortar including all quoins arches pillars etc, complete all as specified and directed.
Taking down cement plaster of any description on brick or stone walls/concrete surface etc. including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n’exc1.5 Sqm and removing from site, complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc1.5 Sqm but n.exc 4.00 Sqm each and removing from site, complete all as specified and directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc, complete all as specified and directed.
Taking down eaves gutters and rain water pipes (any size or pattern), incl all fittings etc, complete all as specified and directed.
M&L for refixing in same opening, shutter of any description exc 2 sqm each, complete all as specified and directed.
S&F pre-painted galvalum alm zink coating GI based corrugated/ semi - corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with coach screw as per manufacturers instrution, complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering as ridge/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
S&F Powder coated GI frame work for false ceiling of size of grid 605 x 605mm (consisting of angle or tee section size 24 x 24 x 1.5mm thick angle section and 24 x 32 x 1.5 mm Tee Section) Powder coated GI snap grid hanging with 02 mm dia GI hanger/wire fixed with steel dashed fastners, complete all as specified and directed.
M&L 4mm thick non asbestos fibre cement designer building board of size 600X600 fixed or laid/inserted to timber/GI/Aluminium framework fixed in ceiling flat or sloping, complete all as specified and directed.
M&L for broken stone hardcore of gauge n exc. 63mm, deposited, spread and levelled in layer n exc. 15cm thick, watered and rammed to a true surface, complete all as specified and directed.
M&L for 75mm thick PCC type D2, 1:4:8 (using 40mm graded stone agg) as in sub base floor surface, complete all as specified and directed.
M&L for 75mm thick PCC type C2 1:3:6 (using 40mm graded stone agg) as in plinth protection/Path/floor finishing surface of concrete topping even and fair without using extra cement, complete all as specified and directed.
M&L for PCC type C2 1:3:6 (using 40mm graded stone agg) as in surface channels and drains.
M&L for extra forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra, including forms, moulds, mitred/ stopped end etc, complete all as specified and directed.
M&L 40 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in flooring and finised the concrete surfaces even and smooth using extra cement, complete all as specified and directed.
S&F Glass dividing strips, 3 mm thick and 38 mm wide inserted in position, complete all as specified and directed.
M&L 15mm thick screed bed or bedding layer of mortar in CM (1:6) for lying floor finishes and surface fair and even, complete all as specified and directed.
M&L for vitrified Ceramic tiles of any colour/shade 10mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles, complete all as specified and directed.
All as per item No 26 above but in vertical surface such as skirting and dados and riser to steps etc, complete all as specified and directed.
M&L 10mm thick rendering as screed bed or bedding layer of mortar in CM (1:4) for laying wall finishes, surface fair and even, complete all as specified and directed.
M&L glazed ceramic coloured tiles of size 350 X 250 X 7mm/ 450 x 350 x 7 mm thick as in walls etc set and jointed in neat cement slurry and pointed in colour cement to match the tiles, complete all as specified and directed.
M&L 18-20mm thick Granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) as bedding layer including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including circular cutting,chamfering of edges as required, complete all as specified and directed.
M&L for machine cut kota stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including circular cutting,chamfering of edges as required, complete all as specified and directed.
M&L Brick work with sub class ‘B’ bricks straight or curved on plan exc. 6m means radius in CM 1:6, complete all as specified and directed.
M&L Brick work with sub class 'B' Brick straight or curved on plain to any radius in half brick thick wall built in cm 1:4, complete all as specified and directed.
Supply only liquid water proofing compound.
M&L for RCC (1:2:4) type B-1using 20 mm graded stone aggregate as in slab supported on wall ,Chajjas,deck slab Shelves/tank staging etc, complete all as specified and directed.
Use & waste frame work to soffits of suspended slab such as floor or roof slab, chajjas and similar work not exc 200 mm thick (Horizontal or slopeing) rough finished, complete all as specified and directed.
M&L Mild steel bars 10mm dia TMT Bars and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
All as per item No 37 above but, 6mm to 8mm dia.
S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates.
M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, complete all as specified and directed. Fe 410-W(Gde E-250) quality-A
M&L framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to fe.290.Gde-E-165, complete all as specified and directed.
M&L for pressed steel frames 125 x 60 mm size of frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.
M&L for Pressed steel frames 105 x 60 mm size of frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.
M&L for 2nd class hardwood 30mm plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and directed.
M&L 2nd class hard wood 35 mm thick glazed & skelton shutter (any no of pannel) open rebated and prepared to receive glass gauge etc with sush bar edges to framing plain chamfered or receive glass gauge etc with sash bar edge of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of member of shutter as specified in SSR Part-I section 8 clause 8.24 (a).
M&L Providing, cement concrete type B-0 1:2:4 (12.5 mm graded aggreate) in filling of pressed steel frame , coping, fixing of hold fast etc similar work.
S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (style), with particle board core and 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification and shown on drg in SSR Part-II 2020.
S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement, in the frame at site as per specification and shown on drawing in SSR Part-II (2020).
S&F 100 mm Butt hinges medium weight medium cold rolled mild steel.
S & F 75mm Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed, type C-21.
S&F 150 mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed.
S&F 200 mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed.
S&F of 150 mm size extruted brass handles, fabricated type polished.
S&F of 100 mm size aluminium handles cast type anodised.
S&F 250mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed.
Hacking out old broken glass any thickness, size, quality or description, from metal/wooden frame including punching or drilling out old glazing pins and removal of demolished material from site.
M&L Steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dove tailed or welded (including two nos tower bolts 125mm in each leaf and one nos MS flate iron 25x 3mm handle in each leaf, complete all as specified and directed.
M&L Steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay, complete without glazing bars, dove tailed or welded (including two nos tower bolts 125mm in each leaf and one nos MS flat iron 25x 3mm handle in each leaf, complete all as specified and directed.
S&F for Steel ventilator with top hung shutter incl hinges, steel peg stay, complete all as specified and directed.
S&F Flat iron/angle iron as in hold fast to fixed door/window.
S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanized wire staples over steel windows and gauzed door.
S&F 3mm thick plain sheet glass ordinary quality & glazing with oil putty n.exc 0.50 Sqm in each pane.
All as per item No 64 above but in 4 mm thick figured glass pin headed type, complete all as specified and directed.
S&F Cast iron body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed.
S&F for Mild steel 300mm, ordinary rat tail rod pattern springs incl roller and roller plate, complete all as specified and directed.
Taking up or down 15mm dia steel tubing and connection including cleaning for re-fixing or removal from site.
S&F, 15mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors.
Refixing old 15mm bore GI tubing medium grade galvanized with fitting fixed in new or old position, complete all as specified and directed.
Taking up or down 20mm dia steel tubing and connection including cleaning for re-fixing or removal from site.
S&F 20mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors.
Refixing old 20mm bore GI tubing medium grade galvanized with fitting fixed in new or old position, complete all as specified and directed.
Taking up or down 25mm dia steel tubing and connection including cleaning for re-fixing or removal from site.
S&F 25mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors.
Refixing old 25mm bore GI tubing medium grade galvanized with fitting fixed in new or old position, complete all as specified and directed.
Dismantling water tanks Capacity in exc 500 & n.exc 1000 liters and removing to store.
S&F Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) hoisted capacity in 1000 liters hoisted and fixed in position all as specified in SSR Part I
S&F PVC Ball valves, high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule and fixed 25 mm bore pipe, complete all as specified and directed.
S&F Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 25 mm bore pipe.
S&F PVC (SWR) pipes 110 mm single socketed in any length with rubberring joints, laid in trenches or in floors
S&F PVC (SWR) pipes 75 mm single socketed in any length with rubberring joints, laid in trenches or in floors.
S&F PVC bends any radius 110 mm dia
S&F PVC bends any radius 75 mm dia
S&F vitreous china wash hand basin, oval shape, white 600x480mm including erecting in cutting hole and making necessary arrangement for fixing.
S&F in repair vitreous china wash down water closet pan (pedestal pattern), white (excl fixing nbolts, flushing cistern and flush pipe) complete including making good to floor.
S&F in repair plastic water closet seat cover, white or black, closet pattern with recessed bottom, and cover and mild steel steel chromium plated or aluminised hinging device, complete all as specified and directed.
S&F in repair 10 ltr capacity PVC low level flushing cistern, white inlet ball valve, float and handle and connection to pipe including bracket.
S&F 450mm long, 15mm dia, PVC connection pipe, with brass unions on both ends.
S&F 15 mm bore bib taps, chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule.
S&F 15 mm bore angle/ stop valves , fancy type chromium plated with long shank and cup (conceaeld type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.
S&F 32 mm dia waste/flush pipe for urinal and WHB, complete all as specified and directed.
Supply only 15 mm pillar tap but fancy, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.
S&F for Brass chromium plated tubular towel rail 20mm dia D Type, 60 cm long between flanges.
S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms), complete all as specified and directed.
S&F for stainless steel sink made out of 1.00mm thick sheet for kitchen or laboratory with plug, warshers waste pipe, cast iron cantilever brackets, connecting union overall size 495mmx420mm with bowl size 410mmx330mmx160mm
M&L 75mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.
M&L 10mm thick rendering on fair faces of brick work/concrete surface in CM (1:6) surface finished fair & even, complete all as specified and directed.
M&L 15mm thick rendering on fair faces of brick work/concrete surface in CM (1:4) with applying water proofing compound (As per manufrature instruction) surface finished fair & even, complete all as specified and directed. (WPC will be paid saperatelly)
M&L preparation of new plastered surface of wall and applying two coats of oil bound distemper over one coat primer, complete all as specified and directed.
M&L preparation of complete removal of existing treatement from old plastered surface of wall and applying two coats of oil bound distemper over a coat of 1mm thick wall care putty, complete all as specified and directed.
M&L preparation of new surface of wall and applying two coat of cement base paint, in any colour, complete all as specified and directed.
Complete removal of existing treatment of old surface walls by washing rubbing down & stopping of painted surfaces and applying two coat of cement base paint, in any colour, complete all as specified and directed.
M&L applying one coat of synthetic enamel paint over a coat of pink primer including preparation of old wooden surfaces of any description exc10cm width or girth not otherwise described, complete all as specified and directed.
M&L applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description over 10cm width or girth not otherwise described, complete all as specified and directed.
M&L applying one coats of synthetic enamel paint over a coat of red oxide primer including preparation of old steel surfaces of any description over 10cm width or girth not otherwise described, complete all as specified and directed.
S&F for 150mm dia mild steel eaves gutter, 1mm thickness, galvanised class 3, half round with round edges.
M&L For PCC 1:2:4 type B-0 using 12.50 mm aggregates as in roof kerb, rounded or chamfered, padding concrete over the roof slab to bring the slope including forming coving the junction of parapet wall and RCC roof slab, complete all as specified and directed.
M&L for 6 mm thick Asbestos cement, corrugated sheet fixed with ‘L’ type or ‘J’ type or cranked hook bolts, complete all as specified and directed.
M&L 2nd class hard wood in scantling wrought sawn, complete all as specified and directed.
M&L 2nd class hard wood in scantling clean sawn, complete all as specified and directed.
M&L for roughening surface of old concrete floor by picking, sweeping cleaning and washing down with to remove dust, complete all as specified and directed.
M&L for brushing neat cement slurry with 3.0 kg of cement per Sqm, complete all as specified and directed.
M&L non-skid ceramic tiles of any colour/shade 7 to 8 mm thick area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles, complete all as specified and directed.
M&L non-skid ceramic tiles of any colour/shade 7 to 8 mm thick area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles, complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 200x200X 7mm thick as in vertical surface etc set and jointed in neat cement slurry and pointed in colour cement to match the tiles, complete all as specified and directed.
S&F 125mm Double action spring hinges, mild steel with steel wire spring, stove enamelled, black, complete all as specified and directed.
S&F in repair vitreous china wash hand basin, white flat back of size 550 mm x 440 mm including brackets or erecting stand and making necessary arrangement for fixing.
S&F in repair vitreous china squating pan 'ORRISA' pattern, size 580X450mm white with integral foot rest complete including connection to trap and to antisyphonage pipe etc complete including making good to floor.
S&F in repair Brass chromium plated shower rose 125mm with or without swivel joints, including fixing to steel pipe or union, complete all as specified and directed.
M&L applying two coats of synthetic enamel paint over a coat of pink primer including preparation of newly wooden surfaces of any description exc10cm width or girth not otherwise described, complete all as specified and directed.
M&L applying two coats of synthetic enamel paint over a coat of pink primers including preparation of surgace of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with greosote, complete all as specified and directed.
Taking down copper/ aluminium point wiring (light, fan, socket or power) complete with screws, gutties including fixture and fittings such as switches, ceiling rose, pendants, regulators, sockets, light fittings, etc. removing materials to store for taking credit and making good disturbed surfaces of walls, floors, ceiling, etc.to match with existing surfaces, complete all as specified and directed.
M&L for point wiring (concealed) with 1.5 Sqmm PVC insulated FRLS unseathed multi stranded copper conductor cable 1100 volts confirming to IS-694-1990 and one run continious earth wire with 1.5 Sqmm stranded core PVC insulated unsheathed FRLS copper conductor confirming to IS-6941990 in PVC Conduit concealed type incl PVC conduit/fitting etc, switch,sockets fixed to modular MS boxes and metal colour plate complete all as specified and directed :-
One light point controlled by one switch
One fan/exaust point controlled by one switch
One light point controlled by two 2 way switches, with cables 1.5 sqmm size
One 3 pin socket outlet 5 Amps, on the same board with other switches
One socket 3 pin outlet 5 amp on independent board
S&F One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cable 1.5 sq mm size.
All as per item No 147 above but with copper conductor cable for one 3 pin socket outlet 15 amp independent board with cable 2.5 sq mm including one run of 2.5 sq mm copper conductor as earth contnuity wire, complete all as specified and directed.
S&F Switch piano, flush type single pole, one way 5 Amp 1 module, complete all as specified and directed.
S&F Modular switch 2 way 6A, 1 module, complete all as specified and directed.
S&F modular white cover plate with frame,2 module. Make : Anckor/Legrand/Havells (Crabtree)HPL.
S&F modular white cover plate with frame,3 module. Make : Anckor/Legrand/Havells (Crabtree) /HPL
S&F modular white cover plate with frame,4 module. Make : Anckor/Legrand/Havells (Crabtree) /HPL
S&F modular white cover plate with frame,6 module. Make : Anckor/Legrand/Havells (Crabtree) /HPL
S&F modular white cover plate with frame,12 module. Make : Anckor/Legrand/Havells (Crabtree) /HPL
S&F ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body, AC, 230 volts, complete all as specified and directed.
S&F in replacement of flexible wire twin core copper conductor of size 23/ 0.0076 for fans and fluorescent tube light, pendant fittings connection upto 1.50 mtr length, complete all as specified and directed.
S&F in replacement modular type electronic fan regulator, complete all as specified and directed.
S&F Socket outlet 2 in 1, 3 pin, 5A multipurpose, flush type, complete all as specified and directed.
S&F Switch socket outlet 3 pin 5 amp' flush type multipurpose, flush type, complete all as specified and directed.
S&F Switch socket outlet 3 pin, 15 amp, flush type flush type universal, complete all as specified and directed.
M&L in replacement of lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fitting, complete all as specified and directed.
S&F LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed. Make : Havells (Cat Part No LHEXARP7IN1W020_20W or equivalent
Taking down and Refixing only ceiling fan and connecting up with round flexible copper conductor Flame retardant PVC insulated and sheathed 3 core multi stranded of size 0.50 Sq mm from ceiling rose to connector of C/Fan, complete all as specified and directed. (Note : Cost of Flame retardant PVC insulated unsheathed multi stranded round flexible copper conductor 1100 V grade 3 Core 0.5 Sqmm from ceiling rose to connector of C / Fan is deemed to be included in the rate quoted.
Taking down sub main wiring of any size from the ceiling, walls etc and incl making good to the disturbed surfaces of wall/ ceiling to match with the existing surface, complete all as specified and directed.
S&F in replacement sub main wiring alongwith earth wire with 2 x 4.0 Sqmm + 1 x 2.5 Sqmm earth wireof FRLS PVC insulated copper 1100 V grade conductor, single core cable in surface/ recessed as required drawn in and including PVC conduit with all accessories such as saddles, screws etc, complete all as specified and directed. (a) 2x4.00 Sqmm + 1x2.5 Sqmm earth wire
S&F in replacement sheet metal enclosure for DB's for using MCB, MCB DB, single pole and neutral 8 ways double door with 200 amps rated bus bar 240 volts and all accessories, complete all as specified and directed.
S&F in replacement of MCB single pole and neutral 32-63 amps, 240 Volts
S&F in replacement of MCB 6 to 32 amps single pole 240 Volts
M& L for Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB
S&F Bell push 6A 1 module, flush type, complete all as specified and directed.
S&F bell multi music type, AC, 230 V, single pole, complete all as specified and directed.
Supply and replacing 1100 volts grade heavy duty PVC insulated aluminium conductor, served with inner sheathing of PVC in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire, one twin core cable of size 6 Sqmm multi -strand, complete all as specified and directed. Make : Havells
Rajeev Ranjan
india trading company
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .