138WE/L-73/2020-21

Amount

Surface excavation (not exceeding) 30 cm deep and averaging 15cm deep and getting out as in hard/dense soil, complete all as specified and as directed.

Excavating in post holes (or similar holes) each n.exc. 0.50 cum in hard/dense soil, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm, watering and removing surplus soil to a distance n.exc. 50 m and making good surface, complete all as specified and as directed.

Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out in hard/ dense soil, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 Cms thick, complete all as specified and directed.

Removing excavated materials/ soils, not exceeding 50mtrs and depositing where directed at a level not exceeding 1.50mtrs, complete all as specified and directed.

M&L for Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate), as in foundation filling and mass concrete, complete all as specified and directed.

M&L for Plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate), as in foundation filling and mass concrete, complete all as specified and directed.

M&L for Hard core of broken stone or boulders of gauge not exc 63 mm deposited ,spread and levelled in layer not exc 15 cm thick complete all as specified and directed by Engr-in-Charge.

M&L for Mild steel Joist, channel, angle or tee section fixed independently without connecting plate etc. (Cut to ordinary length i.e. within 20mm of the length indicated) conforming to Fe-410-W grade E-250 quality - A, complete all as specified and as directed by Engr-in-Charge.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St 240, complete all as specified and as directed by Engr-in-Charge.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, complete all as specified and as directed by Engr-in-Charge.

S&F mild steel hand rails, half round or other steel section or core for wooden hand rail straight portion, drilled and countersunk for balusters running bars for doors, balusters, nosing to steps including embedding in concrete and screwing etc wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc Flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting or riveting etc and similar work conforming to Fe 410 Gde E-310-0, complete all as specified and as directed by Engr-in-Charge.

Mild steel screw bolts of length of bolt exc 5cm but n.exc 10cm long, diameter of neck 11 to 15mm (machine made) with hexagonal or square heads, at one end and screwed the other or screwed both ends, each screwed end to fitted with wahsers and one hexagonal or square nut, complete all as specified and as directed by Engr-in-Charge.

Pre-painted Galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed by Engr-in-Charge.

Pre-painted Galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed by Engr-in-Charge.

M&L for Preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat or red oxide primer, complete all as specified and as directed by Engineer-In-Charge.

M&L for 100mm thick Plain cement concrete (1:4:8), type D-2 (using 40mm graded crushed stone aggregate), as in sub base of floors and pavings, finished even and fair without using extra cement, complete all as specified and as directed by Engr-in-Charge.

M&L for cement concrete work in pavement/hardstanding of flexural strength 40 Kg per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less mixed with metallic floor hardner (300 gms/Sqm), complete all as specified and directed by Engr-in-Charge. Note : Metallic floor hardner will be measured and paid seperately.

Supply only metallic floor hardner.

M&L for forming contraction (Dummy) joints, 50mm deep x 10mm wide for plinth protection and similar work, filled with sealing compound Grade 'A', complete all as specified and directed by Engr-in-Charge.

M&L for 75mm thick Plain cement concrete (1:2:4), type B-1 (using 20mm graded crushed stone aggregate), as in plinth protection, finished even and smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge.

M&L for Precast cement concrete block masonry built in PCC 1:3:6, type C-1, (using 20mm graded crushed stone aggregates) masonry with solid blocks exceeding 10 cms in width and setting in mortar 1:6, complete all as specified and directed.

M&L for Plain cement concrete 1:3:6 type C-0 (using 12.5mm graded crushed stone aggregate), as in Damp Proof Course, complete all as specified and directed.

M&L for Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and sofits (if any) of foundations and plinth beams and similar works, vertical or to batter, for rough finished surfaces of concrete, complete all as specified & directed by Engr-in-Charge.

M&L for Plain cement concrete M-25, (using 20mm graded crushed stone aggregate), as in foundations including rafts, footings, foundation beams, plinth beams, bases for column etc., basement slab under reamed piles, complete all as specified and directed.

M&L for Plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate), as in roof kerbs or mud stops, lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses lacing courses, parapets and railings upto 60 cm in height, coping, kneelers, apex stones bed plates, kerbs including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed by Engr-in-Charge.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed by Engr-in-Charge.

All as per description of item Ser No 27.00 above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and as directed by Engr-in-Charge.

S&F 0.63mm thick galvanised corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers in roofs, walls etc with grade of zinc coating 275, complete all as specified and directed.

M&L for 75mm thick Plain cement concrete (1:3:6), type C-2 (using 40mm graded crushed stone aggregate), as in sub base of floors, finished even and fair without using extra cement, complete all as specified and as directed by Engr-in-Charge.

M&L for Machine cut kota stone slab flooring 20-25mm thick, bedded and jointed in grey cement slurry and pointed with white or coloured cement mixed with pigment to match the shade of granite including grinding and polishing over and including 20 mm thick cement screed in cement mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge. Shade/Colour shall be approved by the GE.

S&F second class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed by Engr-in-Charge.

S&F 35mm thick, 2nd class hard wood plain framed panelled shutters, (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and directed by Engr-in-Charge.

S&F 35mm thick, 2nd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass/guage etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing wire mess etc of sizes of members of shutters as specified in SSR Part - I section 8, clause 8.24(a), fitted to chowkats, complete all as specified and directed by Engr-in-Charge.

S&F Sheet glass 3mm thick ordinalry quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed by Engineer-In-Charge.

S&F mild steel work as in hold fasts and similar work confirming to Fe-290 or Gd E-165, complete all as specified and directed by Engr-in-Charge.

M&L for Plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate), as in hold fasts, bed block and like, complete all as specified and directed.

Supply and fixing Aluminium anodised, barrel tower bolts of extruded Section, size 150mm long and fixed, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing Aluminium anodised, barrel tower bolts of extruded Section, size 100mm long and fixed, complete all as specified and as directed by the Engineer-in-Charge.

S&F Extruded aluminium alloy handles, fabricated type, Anodised, size 150mm complete all as specified and as directed by the Engineer-in-Charge.

S&F Extruded aluminium alloy handles, fabricated type, Anodised, size 100mm complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing mild steel butt hinges, medium weight cold rolled 100 mm size complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing mild steel butt hinges, medium weight cold rolled 75 mm size complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing 300mm long aluminium alloy , anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed by the Engineer-in-Charge.

M&L for treating wooden chowkhat surfaces of any description n.exc 10 cm in width or girth with black bituminus paint in two coats, complete all as specified and as directed by Engr-in-Charge.

M&L for preparing and treating small articles of builders hardware such as MS hold fasts, MS butt hinges etc, with two coats of synthetic enamel paint over a coat of primer when unconnected with other paintings or when painted in a different tint, complete all as specified and as directed by Engr-in-Charge.

M&L for forming jambs, etc in cement mortar 1:6 to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and as directed by Engr-in-Charge.

M&L for making good under cills or over arches, lintels and bressummers in cement mortar 1:6 including all pinning when necessary, complete all as specified and as directed by Engr-in-Charge.

M&L for Rendering 15 mm thick, on fair faces of brick or concrete surfaces, in cement mortar 1:6, finished even and smooth (without using extra cement), complete all as specified and directed.

M&L for Rendering 15 mm thick, on other than fair faces (stone masonry works), in cement mortar 1:4 mixed with water proofing compound @ 3% by weight of cement, finished even and smooth (without using extra cement), complete all as specified and directed. Note : WPC will be measured and paid seperately.

Supply only integral water proofing compound.

M&L for 2nd class soft wood clean sawn timber scantling fixed with nails, complete all as specified and directed by Engr-in-Charge.

M&L for 2nd calss soft wood, clean sawn as in beading for edges of ceiling, lining and wooden flooring fixed with nails exc 6 sqcm and not exc. 13 sqcm in section, complete all as specified and directed by Engr-in-Charge.

M&L for 2nd calss soft wood, clean sawn as in beading for edges of ceiling, lining and wooden flooring fixed with nails exc 13 sqcm and not exc. 25 sqcm in section, complete all as specified and directed by Engr-in-Charge.

M&L 9mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, medium density, fixed with nails to frame work in wall panelling, shelves/boarding, rebated or flat edged, complete all as specified and directed by Engr-in-Charge.

M&L 9mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, medium density, fixed with nails to frame work in ceiling, rebated or flat edged, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new or previously untreated wood or wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer, complete all as specified and directed by Engr-in-Charge.

M&L for Preparation of new plastered or unplastered surfaces of walls and applying two coats of cement based paint, complete all as specified and as directed by Engineer-In-Charge.

M&L for Preparation of new plastered or unplastered surfaces of walls and applying three coats of white wash, complete all as specified and as directed by Engineer-In-Charge.

M&L for 75mm thick Plain cement concrete (1:4:8), type D-2 (using 40mm graded crushed stone aggregate), as in sub base of floors and pavings, finished even and fair without using extra cement, complete all as specified and as directed by Engr-in-Charge.

M&L for Chequered cement concrete tiles 30cm X 30cm X 25mm thick, set, pointed & jointed in neat cement slurry in floors polished with grey cement & pigments, laid over 20mm thick cement screed base in cement mortar (1:6) all as specified and directed by Engr-in - charge.

M&L for Point wiring for one light point or fan point controlled by one switch with 1.50 Sqmm with colour coding, PVC insulated, unsheathed, FRLS single core, multi-stranded, copper conductor cable, 1100 Volts fire resistance ISI, drawn in and including PVC casing and capping not less than 20mm dia with sunk PVC terminal box, fire resistance, ISI marked, fixed surfaces of walls and ceilings, terminated in and including rectangular PVC board for mounting fitting/ switches/ sockets and 1.50 Sqmm, copper conductor, multi-stranded, FRLS as earth continuity wire connected to earth terminal, including making good to disturbed surface as matching to existing descriptions/ specifications, complete all as specified and as directed.

All as per description of item Ser No 62.00 above but for 5 Amp, 3 pin socket on same board, complete all as specified and as directed by Engr-in-Charge.

All as per description of item Ser No 62.00 above but for 5 Amp, 3 pin socket on independent board, complete all as specified and as directed by Engr-in-Charge.

All as per description of item Ser No 62.00 above but with 2.50 Sqmm cable, for one 6 pin switch socket outlet 15 Amp, on independent board, complete all as specified and as directed by Engr-in-Charge.

All as per description of item Ser No 62.00 above but with 4 Sqmm cable, for one 3 pin switch socket outlet 15 Amp, on independent board, complete all as specified and as directed by Engr-in-Charge.

S&F switch socket outlet, 2 in 1, 5 pin, 5 Amp, 240 volts, flush type, complete all as specified and directed by Engr-in-Charge. Make : Anchor/Plaza/Havells/Philips.

S&F switch socket combination, piano flush button single pole one way, 2 in 1, 6 pin, 5/16 Amp, 240 volts, complete all as specified and directed by Engr-in-Charge. Make : Anchor/Plaza/Havells/Philips.

S&F Lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed by Engr-in-Charge. Make : Anchor/Plaza/Havells/Philips.

S&F 10 Watt LED Bulb, complete all as specified and directed by Engr-in-Charge. Make : Syska/Havells/Philips.

S&F Switch piano, flush type, single pole, one way, 5 Amps, 240 volts, complete all as specified and as directed by Engineer-In-Charge. Make : Anchor/Plaza/Havells/Philips.

S&F Ceiling rose, surface bakelite 65 x 50 mm two or three terminals complete all as specified and directed by Engr-in-Charge. Make : Anchor/Plaza/Havells/Philips.

S&F LED light fitting incl LED tube light batten type 1 x 20 watt, 230 volt, 50 Hz, mounted on integrated sleek extruded polycarbonate LED channel with white accrylic cover, cool white colour bipin holder, connector block etc complete with all accessories, internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size, complete all as specified and directed by Engr-in-Charge. Make : Cat part No of Havells : REGALBATTENT8UPTO1X22WDSBSWH for batten & PHOTONULTRAE2.01213T8SSTL20WLED865SPC for lamp or equivalent of Bajaj/Philips/Syska.

S&F LED bulk head light fitting 1 x 10 watt, 230 volt, attractive wall/ceiling mounted, any type with white reflector complete with all accessories, prewired and including connecting up with twin core twisted flexible copper conductor cable, complete all as specified and directed by Engr-in-Charge. Make : Cat part No of Havells : RUGBYNEONFT10WLED860SSYMTOPC or equivalent of Bajaj/Philips/Syska.

Supply, fixing, connecting and testing LED Flood Light suitable for working on 230 volts, 50 Hz, AC of 100 Watt, complete all as specified and directed by Engr-in-Charge. Make : Cat part No of Havells : JETAIRISFLS100WLED757ASYMLTG or equivalent of Bajaj/Philips/Syska.

S&F Sheet metal enclosures for DBs double door when MCBs to be used Single pole and neutral, 4 ways, 240 Volts, with 200 Amps rated bus bar, with bus bar neutral link earth bar, DIN rail, blank plate, complete all as specified and directed by Engr-in-Charge. Make : Legrand/Havells/L&T.

S&F Sheet metal enclosures for DBs double door when MCBs used Triple pole and neutral (TPN), 4 ways, 415 Volts, with 200 Amps rated bus bar, with bus bar neutral link earth bar, DIN rail, blank plate, complete all as specified and directed by Engr-in-Charge. Make : Legrand/Havells/L&T.

S&F MCB, TPN, 40 Amps, 240 Volts, AC, complete all as specified and directed by Engr-in-Charge. Make : Legrand/Havells/L&T.

S&F MCB, SPN, 32 Amps, 240 Volts, AC, complete all as specified and directed by Engr-in-Charge. Make : Legrand/Havells/L&T.

S&F MCB, single pole, 6 to 32 Amps, 50 Hz, 240 Volts, AC, made from moulded self-existing thermostat plastic and suitable 'C' curve, 10 KA breaking capacity and terminal box suitable for 1.5 to 6 sqmm cable complete conforming to IS 8828 of 1996, complete all as specified and directed.

S&F LED light energy saving & environmental friendly, long life versatile pressure dia cast aluminium, IP66 street light of 25 watt, 5700K, 240 volts, single phase LED light incl GIbracket of 40mm dia pipe for fixing on wall incl connection with suitable size 3 core PVC cable, complete all as specified and directed. Make : Havells cat Part No ENDURAPEARLSL25WLED757SASYTOPC of equivalent in Bajaj/Philips/C&G.

M&L submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing caping, wire size 2 x 6.0 Sqmm and 1 x 6.0 Sqmm earth wire, complete all as specified and directed by Engr-in-Charge.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sqmm nominal cross section, 4 core in service connections, complete all as specified and directed by Engr-in-Charge. Make : Plaza/Finolex/Havells/Gloster.

Supply and laying cable XLPE insulated PVC bedded steel strip or wire armoured, heavy duty electric power cable with aluminium conductor 1100 volts grade, 2 core, cross sectional area 10 Sqmm, complete all as specified and directed by Engr-in-Charge.

Sand cushioning to protection of underground cables, laid 8 Cm before laying and 15 Cm after laying of cable, and punned to form an overall layer of 18 Cm thick, complete all as specified and directed by Engr-in-Charge. Note: Punned thickness shall be measured.

Supplying and laying un-reinforced precast concrete cable cover, Class LV Type-I, flat, size 250mm x 150mm x 40mm, complete all as specified and directed by Engr-in-Charge.

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6 mm buried directly in ground (earth pit not less than 2.25mtr deep below GL) with top edge of earth plate not less than 1.5mtr below normal GL, connected with GI wire 4.0mm dia as earth lead means of bolts, nuts, check nuts and washers of GI or steel complete with 15 mm dia GI light grade protection pipe, 20mm dia GI light grade watering pipe with funnel incl charcoal, dust, salt, PCC M-15, type B-1 in pit with precast RCC M-15(1:2:4), type B-1(using 20mm graded crushed stone aggregates) in cover reinforced with 8mm dia TMT bars @ 75mm c/c both ways with mild steel handles of 12mm dia, PGI funnel with wire mesh incl, test point etc. all as shown in electric plate No-5 of SSR Part-I (2009), complete with necessary earth work in any type of soil, removal to a distance n.exc. 50mtr, incl testing on completion, complete all as specified and as directed. Note : Earth pit chamber and RCC pit cover shall be painted with two coats of sythentic enamel paint over one coat of primer. The cost of earth work, PCC pit and pit covers, funnel and watering pipe, wire mesh, charcoal dust and common salt, 15mm dia, light grade, GI pipe as protection to earth lead and earth lead as 4.0mm dia GI wire shall be deemed included in the unit rate for earthing.

R B TRADERS

M/S GLOBAL ENGINEERS

HILL AND CO.

VIJAY ENTERPRISES