Procurement of 15 KW High Frequency Fixed X-Ray Machine (300 mA) Under Development Grant at Medical Unit, Main Campus Shalimar, SKUAST-K.

Amount

15 KW High Frequency Fixed X-Ray Machine (300 mA)

HV TANK :  A very compact H.V Tank filled with high dielectric transformer oil should be provided. The H.V Tank should contain H.V transformers Filament, Transformers, H.V rectifies & H.V cable receptacles. TUBE STAND :  Floor to ceiling stand with counter balanced tube head (rotatable ± 90 °) 180° rotatable mounted on floor ceiling rails for convenient movement should be provided. TABLE :  Manual Multi position Table should be provided.  Table Height is 860 mm, Table width is 830 mm & length 1970 mm.  Tilting angle '-15°, 0° , 30° , 60° & 90°  The Table should consist of motorized reciprocating Bucky with imported grid of size 17¼” x 18¾” & of Ratio 8:1-85 Lines/inch.  The Bucky should cover the entire length of the table and should be locked at any desired position by an Electromagnetic lock.  The table should be made of low radiation absorption, waterproof material.  Table Accessories like stainless steel cassettes tray should be provided.  Bucky should accept cassettes up to 14”x 17” POWER REQUIREMENT : The unit should be operable on 3 Phase, 440 Volts AC, 50 Hz 15 Amps with line –resist less than 0.4 ohms. Line regulation ± 10%.

APPROVALS: 1. The quoted model should be approved by AERB & BIS. 2. Company should have ISO 9001:2015, ISO 13485:2016, EN ISO 14971:2012 and ICMED 13485 certificate. Also have MD 9 License to Manufacture Medical Devices from CDSCO of quoted model. 3. Quoted X-Ray tube should be registered with quoted X-Ray machine model. 4. X-ray manufacturer is registered in MSME & NSIC. 5. Manufacturer didn’t have blacklisted /debar from any State Govt/ PSU/Central Govt institute in past Ten Years. No stay order and pending debar case is pending in Indian Penal Court. 6. Manufacturer is having 100 Nos. installation of X-Ray machines in Govt. sector in last One Year. 7. X-Ray manufacturer is having Testing & Calibration Lab with NABL approved and compliance with ISO/IEC 17025:2017 standard.

Flat Panel Detector 1. The detector should be both wired and wireless for data communication. 2. The detector should be a flat panel detector with Cesium Iodide Scintillator 3. The size of the detector should be 35 cm x 43cm (14”x17”) or more 4. Should have spatial resolution of 3 lines pair / millimeter or better 5. Pixel Pitch should be 150 micron or less 6. Detector Quantum Efficiency (DQE) should be 70% or more @ Zero lines pairs (near zero) & MTF minimum 80% at 1 cyc 7. The active-matrix size should be 2.3K x2.3K or more 8. Should have a minimum grey scale of 16 bits/ pixel 9. Detectors should be supplied with two external batteries and the supplied charger should be able to charge two batteries at a time. Detector with inbuilt battery should not be quoted. 10. The detector should be able to work without the battery also under wired mode. 11. Detector should be light weight (< 3kg) 12. Detector should have software which corrects the effect of scatter radiation on acquired image by processing, without the need of physical grid. It should be quoted as optional. 13. Withstand Load: Point Load – 100 kg or more, Surface Load – 300 kg or more 14. Detector should be CE or USFDA approved

Acquisition Workstation: 1. Should have a high resolution TFT/LCD monitor of minimum 17” size or more 2. The Console or Acquisition Workstation PC to be supplied should be of latest generation with at least 4GB RAM. 3. Operating console should have facility for patient identity entry, viewing and processing images.

DRY IMAGER SYSTEM 1. The system must have a laser printer without need of any wet chemistry. 2. It must be DICOM compatible allowing multiple modalities to be connected at a time. 3. The system must be able to print at least 70 films/ hr. of the 14" X 17" size. 4. The imager must have spatial resolution of 500 dpi minimum. 5. The system must have contrast resolution of 12 bits/ pixel or more. 6. The imager should be equipped with 2 tray on line. 7. Time Required for Startup Approx. 15 minutes under 25 o C room temperature conditions. Approx. 10 minutes under 25o C room temperature conditions in Power Saving Mode

1. Note:- The rates quoted by the bidder/s shall be final and inclusive of taxes, carriages of all materials (Mechanical/Manual) and all extra charges till the Installation, Testing of equipment/s is complete in all respects.

Health Imaging Pharmaceuticals (BID ID -2352158)