Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.9 LAccepted-AOC | L1 | Accepted-AOC Being lowest tenderer | |
| 2 | L2₹37.5 L+₹25,235 (0.68%)Rejected-Finance ROOM NO 214 GANESH MURTHY NAGAR PART III COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L2 | Rejected-Finance Being other than Lowest Tenderer | |
| 3 | L3₹41.0 L+₹3.7 L (9.82%)Rejected-Finance 06 SACHIN SANTOSH DALVI G T HOSPITA CSMT MUMBAI MAHARASHTRA 400001 UDYAM MH 19 0135994 27ALQPD7257B1Z2 R M | MUMBAI | MAHARASHTRA | 400001 | L3 | Rejected-Finance Being other than Lowest Tenderer | |
| 4 | L4₹43.8 L+₹6.5 L (17.5%)Rejected-Finance | L4 | Rejected-Finance Being other than Lowest Tenderer |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
12 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Ng Rajesh Singh GE NW KUNJALI
GARRISON ENGINEER NW KUNJALI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI 400005
8943 REPAIR MAINT TO BR WORK AT MUSTER GATE LION GATE CHEETHA GATE AND GOD FREY AND CONNECTED OUT SIDE AREA AT ND MUMBAI
2023_MES_595573_1
8943/E8
Open Tender
Civil Works
Item Rate
183 days
GE (NW) KUNJALI
Please refer tender documents
7 documents required · 7 mandatory
₹500
Yes
GE (NW) KUNJALI
₹96,000
Yes
21 Oct 2023
15 May 2023
14 Jun 2023
22 May 2023
12 Jun 2023
29 May 2023
15 May 2023 - 22 May 2023
Amount
Taking down chowkats or frame with shutter ( without taking off shutter from frame) , n exc 1.5 sqm each complete all as specified.
Taking down chowkats or frame with shutter ( without taking off shutter from frame) exc 1.5 sqm but n exc 4 Sqm each complete all as specified.
Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swanneck, etc. including cleaning or refixing or removal to store (Note : Length will be measured over all as fixed along the centre line over fittings and accessories)
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern in roof coverings
Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings sheeting, any gauge, thickness, including Nainital or similar pattern in roof coverings
Dismantling wrought iron or mild steel work of any description.
Dismantling false ceiling/boarding any description fixed in any position with nails.
Taking down 15mm bore, GI tubing and connections including cleaning for refixing or removal to store.
All as per item No. 8 above but 20 mm bore GI Pipe.
Dismantling 100/75 mm bore, cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches if required complete all as specified and as directed.
Dismantling floor hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises.
Hacking out old broken glass (any thickness, size, quality or description) from wooden & Steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as directed.
Taking down cement plaster on brick/ surfaces built in cement mortar including raking out joints, hacking for key scrubbing down with water etc complete.
Demolition of plain cement concrete of any description and in any position not other wise specifically provided for.
Demolition of reinforced cement concrete of any description and in any position not other wise specifically provided for.
Demolition of brick work or stone /boulder masonry built in cement mortar, including all quoins, arches, pillars, etc
M&L for brick work with sub class 'B' bricks (old Size) straight or curved on plan exc 6 m mean radius and built in CM (1:6)
All as per item No. 17 above but half brick thick wall built in CM 1:4.
M&L for 100 mm thick PCC 1:2:4 type B-I using 20mm graded stone aggregates as in floor finished cement concrete surfaces even and smooth using extra cement complete all as specified and directed by EIC.
S&F Aluminium dividing strips, 1.5mm thick, 38mm wide inserted in position, confirming to design complete all as directed.
M&L for 40mm thick PCC 1:2:4 type B I using 20mm graded stone aggregates as in floor finished cement concrete surfaces even and smooth using extra cement complete all as specified and directed by EIC
S&F for 1st class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,
S&F Solid PVC Door Frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. M.S.frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified.
S&F Powder coated aluminium frame for doors, windows ventilators and partitions with one or more rebates including joining cleat for fixing etc. complete shall as specified.
M&L for Sheet glass 4 mm thk, ordinary quality and glazing in aluminium beading with screws/ rebates in square exc 0.5 sq.m in each pane
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.4mm.
M&L for aluminium anodized grill with suitable aluminium anodized frame of F/H section with suitable fixing screws/attachment etc complete all as per M/S Deco Grill Design No DG -102 , 7.5mm size grill i.e. made out of 75mm thick aluminium plate all as per manufacturer's specifications.
M&L for 12 mm thick pre-laminated Medium Density board,both side decorative lamination interior grade,fixed in aluminium/ wooden frame work.
S&F 100 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11
S&F Aluminium anodised sliding door bolt 300mm long, with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy .
S&F aluminium anodised Barrel tower bolts of extruded section, length of bolt 200mm.
S&F Extruded aluminium anodised alloy handles, fabricated type 200mm size.
S&F Mortice lock, 4 liver vertical type, size 100mm
S&F aluminium (Die cast) body, door closer, hydraulically regulated, desig. No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg
M&L for double action floor spring hydraulically regulated made up of minium 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as per manufacturer's instruction.
S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers
M&L for vitrified ceramic tiles 10 mm thick (square /rectangular ) polished dark shade, area of each tiles not exceeding 0.36 Sqm, in floor etc. set and jointed in neet cement slurry and pointed in white or coloured cement to match the dark shade of the tiles, with and including screed bed in CM 1:6, 20 mm thick all as specified and directed .
All as per item No. 38 above but as in skirting including 10mm thick rendering in CM. 1:4 as backing coat etc complete.
M&L for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified.
M&L for Coloured glazed ceramic tiles in vertical surface 450X350X7mm thick with and including 10 mm thick cm (1:4) backing coat and Triangular filliting at top of skirting, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles.
M&L for 20-25mm thick, machine cut, Kota stone slab, as in floors, steps, landing etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. with and including 20mm thick screed bed in CM 1:4 complete all as specified.
M&L for Hard wear stone (of any type) granite stone slab 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and including 15mm thick screed bed in CM 1:4 complete all as specified.
M&L for Hard wear stone 20mm thick (of any type) granite stone slab machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type and including 10 mm thick backing coat in CM 1:3 complete all as specified.
S&F false ceiling with powder coated exposed GI grid suspension system (E-Grid T-2430 or equivalent load carrying capacity with mid span deflection not exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long, cross Tee 1200mm/600mm long and wall angle. The main runners to be placed @ 1200mm, the cross Tee 1200mm will be inserted in the pre cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmX600mm. Additional cross Tees of 600mm shall be placed perpendicular to the cross tee 1200mm long to finally form a grid of 600mmX600mm. Grid of modular size 600mmX600mm shall be supported by 6 mm dia G.I. wire from purlins/soffit with and including 6mm thick high pressure steam cured non asbestos fiber cement designer ceiling board (Density>1200Kg/Cum) of size 595mmX595mm, confirming IS 14862 & Type B Category III of ISO 8336, tested as per AS 1530 part 3 & BS-476 Part 4, 5, 6, 7 & 8, complete all as per manufacturer's instruction.
S&F false ceiling with powder coated exposed GI grid suspension system (E-Grid T-2430 or equivalent load carrying capacity with mid span deflection not exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long, cross Tee 1200mm/600mm long and wall angle. The main runners to be placed @ 1200mm, the cross Tee 1200mm will be inserted in the pre cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmX600mm. Additional cross Tees of 600mm shall be placed perpendicular to the cross tee 1200mm long to finally form a grid of 600mmX600mm. Grid of modular size 600mmX600mm shall be supported by 6 mm dia G.I. wire from purlins/soffit with and including 5 to 6mm thick high pressure PVC ceiling board of size 595mmX595mm, as per manufacturer instruction complete all as per manufacturer's instruction.
Material and labour for POP false ceiling using 600 x 900 x 12 mm thick plaster of paris with gypsum binder sheet decorative type and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work main joist of size 50 x 25 mm spaced at 750 mm centre, secondary joist of size 75x20 mm fixed to main joists spaced t 900 mm suspended to roof members using 25 x 25 x 2 mm GI angles and fasteners @ 1.2 m C/C including decorative design/pattern all as specified and directed Engr-in-Charge.
Supply and fixing in repair 3 mm thick Aluminium Composite panel cladding plain metallic of approved colour/shade to beam/column/slab in circular/rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour complete all as specified and directed by Engineer-in-Charge.
S & F in repairs PVC 3 to 5 mm thick wall panelling including cutting, moulding, angle cleat, nails, screws, Tee section, etc all as specified and as directed by Engineer in Charge.
Errection & dismantling of MS tubular double scaffolding (H frames) upto ht of 30 m & with necessary brassing, provision of necessary safety equipment to the skilled workers to carry out the work and covering with green cloth for carring out external facework of walls all as directed by Engr-in-Charge.
M&L for PCC 1:7:12 type F2 using 40 mm graded stone aggregate as in filling (sunken portion). etc
M&L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate, using Pidiproof LW+ water proofing chemical of Dr. Fixit or equvalent as per manufacturer's instruction , as in sub floor, 40mm thick. (Water Proofing Chemical shall be measured and paid separately)
Supply only Water proofing chemical Pidiproof LW+ of Dr. Fixit or Equivalent.
M&L for providing 12 mm dia holes of 75mm deep @0.6 m c/c at junction of beams and columns as co-ordinal points for inserting/pouring mixture of resin base latex polymer and cement slurry by pressure grouting for column, beams and slabs, including sealing the holes with CM 1:3, all as specified and as directed by EIC.
S&F welded steel wire fabric, cut to length, fixed to steel members/ reinforcement steel, weight per Sqm nexc. 4 Kg.
M&L for RCC Type B1 1:2:4 (using 20 mm graded stone aggregate) as in slab supported on wall, beam and coulumn, roof, landings, balconies, canopies, deck slabs and in shelves and the like including all necessary form work complete all as directed.
M&L for mild steel TMT bars,10 mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-S or Fe-410-0
All as per item No. 57 above but as in stirrups.
S&F for rolled mild steel Sections of Grade Fe 410-W, (Gde- E-250) quality-A, as in post, runners, rafters, purlins, trusses, steps etc fixed with connecting plates including bending, welding etc complete
S&F for mild steel plates of Grade Fe 410-W, (Gde- E-250) quality-A as in connecting plates, base plate etc. welding etc complete all as specified and directed
S&F Mild steel bolts with diameter of neck exc 12mm and n. exc 20mm purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long
S&F pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
All as per item No. 62 above but plain galvalume sheets for ridges/ Flashings.
Fixing only Pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of an colour as in roof covering/cladding to wall, fixed with self tapping screws as specified. complete all as specified and directed by EIC.
M&L for 1.5 mm thick galvanised steel sheet as in Valley gutters fixed with rivets or other suitable arrangements over MS brackets Trapezoidal shape of required profile with desired slope etc complete all as specified and as directed by Engr-in-Charge.
S&F 15 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors all as specified and directed complete all as specified and as directed.
All As per item No. 66 above but 20mm dia medium GI Pipe
S & F in repairs teak wood face ply 3 to 4mm thick including nails, screws, adhesive, all as specified and directed by Engineer in Charge.
S&F white vitreous china squatting pan, 'orissa' pattern, water closet of size 580x440mm with integral foot rest, P/S trap etc, fixed in repair complete all as specified complete all as specified and as directed.
S&F white vitreous china washed down water closet pan, (pedestal pattern), white, with and including P/S Trap, PVC solid type seat cover etc, fixed in repair complete all as specified.
S&F vitreous china urinals,half stall type, flat back, white, with grating and union for discharge pipe, complete including providing and fixing plugs, bedding urinal against wall in CM 1: 2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe.(Exclusive of fixing supply pipe to flushing cistern , trap and waste pipe).
S&F white glazed earthen ware vitreous china wash hand basin of size 550x400mm with and including CI brackets, 32mm bore brass CP waste coupling Inlet/ outlet PVC flexible pipe etc complete
S&F 10 litres capacity PVC low level flushing cistern of approved make including ball valve,syphon set, inlet and outlet pipe, brackets etc. Complete.
S&F 50mm, low density polyethylene pipes (LDPE) of pressure rating 6 kgf/Sqcm fixed complete to walls, ceilings or in floors etc
S&F 15 mm bore dia of pipe, brass chromium plated fancy type bib tap fixed in repairs
S&F in repairs 15mm size Stop Valves fancy type chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends
S&F in repair 15 mm dia fancy type pillar tap cast copper alloy with capston heads chromium plated screwed down high pressure with or without hot or cold marking with long screws shanks and fly nuts screwed for iron pipes all as specified and directed.
S&F PVC Connections 15mm size with PTMT nuts of length 600mm
S&F brass chromium plated shower rose 125mm size, fixed in repairs
S&F chromium plated, tubular towel rail 20mm dia, D type, 60 cm long between flange, fixed in repairs.
S&F Soap dish, vitreous china white, appoximate size 160X160X90mm fixed in repairs
S&F 160mm dia PVC ( SWR) grade pipes single socketed in any length with rubber ring joints fixed to walls with and including fixing clips, bends, elbow, shoes bends etc. (Note:- Measurment shall be taken along the centre line of the pipes.)
S&F 110mm dia PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls and laid in floors/trenches.
S&F 75mm dia PVC ( SWR) grade pipes single socketed in any length with rubber ring joints fixed to walls and laid in floors/trenches.
S&F 110mm dia PVC ( SWR) grade double T with access doors including fixing clips
S&F PVC SWR floor trap 75mm, plain with grating including setting and jointing with solvent cement
S&F polyethylene water storage tank rotational moulded, 2000 Ltrs Capacity, hoisted and fixed in position with connecting nipple, top cover etc. complete including dismantling old U/S tank of any description.
M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finishing the surface fair and even all as specified and directed.
M&L for preparation of newly plastered surfaces of wall, applying two coats of oil emlusion distemper over a coat wall care putty of 3mm thick and alkali resistant primer.
M&L for complete removal of existing treatment on wall surfaces and applying a coat wall care putty 3mm thick on plastered surfaces, preparatory to distempering and applying two coats of oil bound distemper over a coat of wall primer.
M&L for rendering 5 mm thick in CM 1:3 on fair faces of brick work or concrete surfaces in ceiling finishing the surface even and smooth all as specified and directed.
M&L for preparation of newly plastered surfaces in ceiling , applying three coats of white wash.
M&L for complete removal of existing treatment in ceiling surfaces and applying three coats of white wash
M&L for plastering in CM 1:4, 20 mm thick in two coats (15 mm under coat plus 5mm finishing coat) using Pidiproof LW+ water proofing chemical of Dr. Fixit or equvalent as per manufacturer's instruction and finishing the surface even and fair without using extra cement. (Water Proofing Chemical shall be measured and paid seperately)
S & F in repairs 1000 Litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I all as directed by Engineer in charge.
M&L for preparation of newly plastered or un plastered wall surfaces, over 10cm girth, applying two coats of 100% acrylic, weather resistant emlusion over a coat of exterior grade wall primer complete all as specified and as per manufacturer's instruction.
M&L for complete removal of existing plastered wall surfaces, over 10cm width or girth, preparation of surfaces, applying two coats of 100% acrylic, weather resistant emlusion over a coat of exterior grade wall primer complete all as specified and as per manufacturer's instruction.
M&L for preparation of new wooden surfaces of any description over 10 cm width or girth, applying two coats of synthetic eanmel paint over a coat of pink primer complete.
M&L for preparation of old decorated wooden surfaces of any description over 10 cm width or girth, applying a coat of synthetic eanmel paint.
M&L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete.
M&L for preparation of old steel surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint complete.
Removing excavated material & debris exc. 1.50 Km but n exc. 15 Km and depositing where directed, in soil outside MD land as directed.
Dismantling of Single layer Mangalore pattern or similar tiles in roofing
Dismantling battens for tiles, shingles etc of any size including tilling fillets exceeding 15 cm spacing.
S & F roof tiles Manglore pattern interlocking at side joint and laid dry all as specified and directed.
S & F for Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 all as specified and directed.
S & F factory made single extruded WPC (wood polymer composite) solid door/window/ceosetory windows & other frames/chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers(wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum density of 750 Kg/Cum and screw withdrawl strength of 2200 N (face) & 1100 N (Edge) minimum compressive strength of 58 N/Sqcm and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer in Charge.
S & F factory made single extruded WPC (wood polymer composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers(wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/Cum and screw withdrawl strength of 1800 N/sqmm and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer -in-Charge.
S & F in repairs for 8 to 10mm thick wooden flooring, any description, laid down over necessary polythene , including skirting, polishing, complete all as specified and as directed.
S&F 35mm thick second class hard wood, plain framed, panelled shutter of 9mm BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces the size of rail and stile as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated .
S&F Ist class hard wood glazed and skelton shutter 30 mm thick for window divided into squares with plain, chamfered or rounded mitred and rebated sash bars with edges of sash bars any numbers.
Pragathi Infrastructure Co.
Sachin santosh dalvi
jalandhara construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .