REPAIR REPLACEMENT OF DOOR WINDOW JOINERY AT BIKRAM ENCLAVE IFA NODE AND AOR OF AGE BRII GE SOUTH UDHAMPUR

Amount

Checking of joinery (wooden/steel) iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, fixing glass panes, minor adjustment of joinery, door etc. including petty repairs material like screws/nails, plug etc. to make it functional complete all as specified and directed by Engineer-In-Charge. Note : Any items required to be replaced shall be paid under respective items complete all as specified and as directed .

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 Square Metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt ), complete all as specified and as directed by Engineer-in Charge/ GE.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), all as specified and directed by Engineer-in Charge/ GE.

Taking down shutters of any description exceeding 1 sqm and n.exc 2 sqm complete, all as specified and directed by Engineer-in Charge/ GE.

Pressed steel frames of 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and as directed.

Pressed steel frames of 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and as directed.

Solid PVC door frame of size 50x47mm made out of 5mm plain colour sheet reinforced with MS square tube all as per specififcation and drawing and as directed by Engr-in-charge/GE.

Factory made, 2nd class hard wood (sal/hollock), plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete including fixing only iron mongery such as tower bolt,handle,hinges,aldrop bolt etc complete all as specified and as directed.

2nd class hard wood (sal/hollock), glazed and skelton shutters 35mm thick open rebated and prepared to receive glass, gauge,etc. (without sash bars), edges of framing palin, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I Section 8.24(a) supplied and fitted to chowkhats complete including fixing only iron mongery such as tower bolt,handle,hinges,aldrop bolt etc complete all as specified and as directed.

Factory made solid PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom railsMS frame shall be coverred with heat moulding plain colour PVC C channels having a PVC sheets strips of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,laock rail & bottom rail on either side &as gap insert for top rail & bottom rail panelling of plain colour PVC sheets to Be fitted in the MS frame welded /sealed to the stiles & rails with suitable complete all as specified and as directed.

Rolled mild steel work of angle iron as in frames of doors & Cup Board etc conforming to grade Fe 410-O or Fe-310-O complete all as specified and as directed.

19mm thick ISI, termite proof , chemically well pressed, prelaminated particle board exterior grade prelaminated, one side with decorative choice lamination and other side balancing white lamination fixed with screws to frame work for kitchen cabinetstand & cup boards etc includimg 6mm th teak wood beading all around complete all as specified and as directed.

Pre laminated 18mm thick lead free factory made 100% solid WPC (wood polymer composite) sheet having high natural fiber conter 25 to 30% wood colour sheets with density not less than 500 kg/cum and the weight of sheet of 1 Sqm should be 11 kg (+/- 5%) manufactured by ISO 9001-2015 certified company. the sheet should be 100% water proof, ermite proof, fire ratardant, manufacured by single layer extrusion process with exellent screw holding capacity and shore D hardnes, compete as per direction by Engr-in-Charge/GE.

Steel window (box type) factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all specified. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

Description all as per item No 14 above here in before but without glazing bar complete all as specified. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately

Factory made mild steel ventilators box type with upper top hung shutters and bottom fixed type shutters including pintol hinges,steel peg stay and one shop coat of red oxide primer complete all specified. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1302/2009 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately

Door seal for wooden/Aluminium/steel door shutter complete all as specified and as directed by Engr-in-charge/GE.

Brass magic eye suitable for 180 degree fixed to wooden door shutter, complete all as specified and as directed by Engr-in-charge/GE.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gd E-165 complete all as specified and as directed.

Granite stone 18-20mm thick (table rubbed and polished) in window cills, cooking plateforms and the like not less than 1 sqm (in one piece0, laid over 15mm thick layer of cement mortar 1:3 after roughning of existing concrete surface and applying a layer of neat cement slurry @ 3kg/sqm including pointing in white cement 1:2 using marble dust with admixture of pigments to match with shade of stone, including demolition of stone slabs and tiles of any description or thickness in floors etc. laid, bedded and pointed in any mortar complete all as specified and as directed.

Machine cut kota stone slab flooring 18-20mm thick over cement screed base 15mm thick in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Harrison , rails drapery rod powdered coated including brackets and necessary fitting as directed by Engg-in-charge/GE.

S&F in repairs aluminum handles cast type, anodised, 150mm size complete all as specified and as directed.

Aluminum anodised barrel tower bolts of extruded section with 150 mm long bolt complete all as specified and as directed.

S&F in repair mild steel cold rolled butt hinges medium weight 100 mm long, including fixing to pressed steel door frame if required complete all as specified and as directed.

Mild steel cold rolled butt hinges medium weight 75 mm long, including fixing to pressed steel door frame if required complete all as specified and as directed.

Mild steel cold rolled butt hinges medium weight 50 mm long, including fixing to pressed steel door frame if required complete all as specified and as directed.

S&F in repair of galvanised mild steel wire clothcut to size, 0.56 mm nominal dia wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and as directed.

S&F in repair 2nd class soft wood beads, straight (any size) for glazed or gauzed joinery, renewed, including miters etc complete all as specified and as directed.

S&F in repair MS helical door spring 300mm size incl roller and roller plate fixed to wooden or steel frames with welding etc complete all as specified and as directed.

S&F in repair 100 mm long aluminium anodised hasp and staple complete all as specified and as directed.

S&F in repair tubular towel rail, 20mm dia, D type, 60cm long between flanges aluminium anodized, fixed with rawl plugs complete all as specified and as directed.

200 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt complete all as specified and as directed.

Mild steel sliding door bolt plate type 250 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and as directed.

Mild steel sliding door bolt plate type 300 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and as directed.

150 mm long mild steel pressed steel handle, oval type, stove enameled black complete all as specified and as directed.

Hacking out old broken glass panes (any thickness size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.

3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and as directed.

4mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified and as directed.

S&Fin repair for 2nd class hard wood small fittings such as shaped door & window stops, cleat including all necessary labours, articles not exceeding 200 cubic centimeter each complete all as specified and as directed.

Welding in repairs n. exc 6mm thick metal and n. exc 2.5 cm in length complete all as specified and as directed.

Glass self 600mm long including CP supporting clamps, screws etc, complete all as specified and as directed by Engr-in-Charge/ GE. Make : Cat part No AKP-35771P or equivalent as per specifed in PS.

S&F in repairs Corner Glass shelf with chromium plated guard rails Make Cat No ACN-1171N

S&F in repair 1mm thik plate rack made of stainless steel, 600x750x250 mm (Wt not less than 7.5 Kg) including brackets and embedded in brick wall all as specified and as per manufacturers instruction.

Providing 40 mm thick cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregates as in floor and finished even and smooth without using extra cement complete all as specified and as directed.

Providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed.

Cement concrete 1:2:4 type B-0 using 12.50 mm graded crushed stone aggregates as in cills, lintels, upto 1.50 metre clear span, copings, benching, bed plates etc. and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form works complete all as specified and as directed..

Cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in surface channels and drains complete all as specified and as directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

15 mm thick rendering on fair faces of brick or stone/concrete surfaces in cement mortar 1:4 and finished surface even and smooth without using extra cement complete with water proofing compound complete all as specified and as directed. (WPC shall be measured separtely)

15 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed.

10 mm thick rendering on fair faces of brick /concrete surfaces as in ceiling in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed.

Rendering 15 mm thick cement plaster 1:4 on wall/ceiling/chajja/facia/beam/coloumn including taking down, cleaning using preservative material and match the existing surface with white wase, cement base paint/ appex and distemper which is required exceeding 0.50 Sqm but not exceeding 1.0 Sqm complete all as specified and directed.

Applying one coat of oil bond distemper on walls including preparation and complete removal of existing treatment from old decorated plastered or unplastered surfaces of walls, tint and shade as approved by Engr-in-charge, complete all as specified and as directed.

Applying two coat of oil bond distemper on walls after preparation of newly plastered surfaces complete all as specified and as directed.

Applying two coats of white washing on ceiling including preparation of newly plastered surfaces complete all as specified and as directed.

Applying two coats of cement base paint after preparation of newly plastered surfaces complete all as specified and as directed.

Applying one coats of cement base paint after preparation of old plastered surfaces complete all as specified and as directed.

Applying one coat of white wash on old decorated plastered surfaces of ceiling after preparation of surfaces complete all as specified and as directed.

Applying one coat of white wash on old decorated plastered surfaces of walls after preparation of surfaces complete all as specified and as directed.

Applying 1mm thick layer of wall putty on walls to give uniform surface complete all as specified and directed. NOTE:-(Before applying of wall care putty, Complete removing of treatment as directed and approved by Engr-in-charge)

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed.

25 mm thick PCC 1:2:4 type B0 using 12.5mm graded aggregate as in level course on floor etc complete all as specified and as directed.

Non skid coloured tiles (square/rectengular) 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc including 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes under floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed.

All as per item No 66 above but on vertical surfaces as in skirting complete all as specified and as directed.

Non skid coloured tiles (square/rectengular) 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, including 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes under floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed.

Glazed Coloured Ceramic tiles in vertical surface 300x450x7mm thick incl laid over 10 mm thick screed bed in CM 1:4, set and joint in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified and as directed.

Brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed.

Random rubble masonry built in cement mortar 1:6, uncoursed, well bonded, bedded and solidly hearted complete all as specified and as directed.

Flush pointing to stone rubble masonry, uncourse or brought up to courses built in cm 1:4 complete all as specified and as directed.

Preparation of wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed.

Providing cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulaton boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

AC designer composite ceiling board 4mm thick in 600mmx600mm panel confirming to IS-14682 type-B category-3 including GI frame work with size of grid 605x605mm for seemless ceiling comprising of GI perimeter , holdfast & suspenders and all accessories complete all as specified and as directed by Engineer-in-charge/GE.

Dismantling asbestos cement/galvalum sheet/CGI (corrugated , semi corrugated etc) sheets as in roof covering.

0.50 mm thick prepainted galvalume aluminium zinc coated GI based semi corrugated/profile steel sheeting of any colour, having tensile strength of 550MPA as in roof covering, wall cladding with self tapping screws or 'L' type of 'J' type or cranked hook bolts in lieu of screws as per manufactures instructions, all as specified and as directed.

0.50 mm thick prepainted galvalume aluminium zinc coated GI based plain steel sheeting of any colour, having tensile strength of 550MPA as in roof covering, wall cladding with self tapping screws or 'L' type of 'J' type or cranked hook bolts in lieu of screws as per manufactures instructions, all as specified and as directed.

Rolled mild steel work in main and cross beams, hip and jack rafters; purlins where connected to comman rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, conforming to Fe-410-0 or Fe-310-0, complete all as specified and as directed.

Machine pressed precast concrete interlocking paver block (glossy finish)of approved shape and size confirming to IS 15658-2006 of 60 mm thickness with grey cement and no pigment, M-35 Grade of approved colour and design complete all as specified and directed by Engr-in-Charge/GE.

75 mm thick plain cement concrete type D-2 (1:4:8) (40 mm graded stone aggregates) as in sub base complete all as specified and as directed.

Sand cushion 20 to 30mm thick for fixing of inter locking tiles complete all as specified and directed by Engr-in-Charge/GE.

Machine pressed (factory made) precast plain cement concrete 1:2:4 type B-1(20mm graded crushed stone aggregate), kerb stone & the like of size 300mm x 300mm x 100mm thick or of size as approved by GE, with plain fair faces including chamfers, weathering etc, embedding in position/laid in trenches on edges of roads, including excavation in any type of soil, setting in cement mortar (1:4) returning filling and removal of surplus soil/debris to a distance n.exc. 50m from the starting point, complete all as specified and as directed.

khajuria builders (BID ID -3067169)

SINGH CONST CO (BID ID -3052916)

M/S GURBACHAN SINGH (BID ID -3059467)

PARDEEP SHARMA (BID ID -3067370)