REPAIR REPLACEMENT AND POLISHING OF VARIOUS WOODEN FURNITURE INCLUDING SOFA AND RECANNING OF VARIOUS TYPE OF CHAIRS OF MD ACCN AT AF STN SINGARSI UNDER AGE I AF SINGARSI

Amount

(BED HARD PLY TOP) Remove the unserviceable plywood from both side of head board frame of bed. Supply and fixing with new plywood 4mm thick one side teak face on the both side existing head board (Size of ply : 780mm x 340mm) and 12mm dia half cut teak wood beading shall be provided with joints of plywood.(Drg No. FD-246)

All as per item No. 1 here-in-before but for foot board. Size of Ply shall be 780mm x180mm.(Drg No. FD-246)

Remove of unserviceable legs from head board of bed and Supply and fixing with new legs in its original position made out of teak wood. Size of leg shall be 60mmx 60mm x 860mm and all as per drg and directed by Engineer-in-charge.(Drg No. FD-246)

Remove of unserviceable legs from foot board of bed and Supply and fixing with new legs in its original position made out of teak wood. Size of leg shall be 60mmx 60mm x 500mm and all as per drg and directed by Engineer-in-charge.(Drg No. FD-246)

Remove the existing unserviceable long rail and supply and fix new long rail (size : 35mm x 90mm x 1980mm) made out of Teak wood well seasoned and all as shown on drg and directed by Engineer-in-charge.(Drg No. FD-246)

Remove the existing unserviceable ply wood from bed and supply and fixing with new plywood 12mm thick BWR IS-303.(Drg No. FD-246)

Preparation of surface by Remove of existing polishing mark scratches from all exposed wooden surface to make clean and smooth with required grade of sand paper and finish with polish to bring the surface to require glossy finish and as directed by Engr-in-Charge.(Drg No. FD-246)

(CHAIR WRITING) Remove of existing unserviceable under mentioned members and providing the new one made out of 1st class HW well seasoned (Teak) and fixing the same in in its original position as per drg. Front Legs.(Drg No. FD-280)

Rear Legs.(Drg No. FD-280) .

Front rail of seat frame (Hole should be 12.5mm apart of each other).(Drg No. FD-280)

Side Rail(Ditto complete).(Drg No. FD-280)

Long Stiffener.(Drg No. FD-280)

Back rest batten.(Drg No. FD-280)

Arm rest.(Drg No. FD-280)

Remove the existing canning and supply and weave with 2mm thick new white plastic cane oval shape godrej patern and beading with 4mm thick new white plastic cane as approved.(Drg No. FD-280)

All as per item No 7 here-in-before but for chair writing.(Drg No. FD-280)

(CHAIR DINING)Remove the existing canning and supply and weave with 2mm thick new white plastic cane oval shape godrej patern and beading with 4mm thick new white plastic cane as apporeved and providing new hard rubber/PVC shoes at the bottom of the chair.(Drg No.FD-279/228/16)

Remove of existing unserviceable under mentioned members and providing the new one made out of 1st class HW well seasoned (Teak) and fixing the same in its original position as per drg. Front Legs.(Drg No.FD-279/228/16)

Rear Legs.(Drg No.FD-279/228/16)

Front rail of seat frame (Hole should be 12.5mm apart of each other),(Drg No.FD-279/228/16)

Side Rail(Ditto complete).(Drg No.FD-279/228/16)

Back Rail(Ditto complete).(Drg No.FD-279/228/16)

Short stiffener.(Drg No.FD-279/228/16)

Back rest batten.(Drg No.FD-279/228/16)

All as per item No 7 here-in-before but for chair dining.(Drg No.FD-279/228/16)

(TABLE DINING 4 PERSONS)Taking out old u/s top of table dining 4 pers & supply & fixing new top made out of prelaminated particle board bonded with phenol formaldehyde exterior gde 18/19mm thick one side teak veneered & other side having balancing white laminated duly fixing with 19x4mm thick teakwood beading all around the top complete all as specified and shown on drg.(Drg No.FD- 30(M) / FD-1115)

Removing old & u/s legs of table dinning 4 pers & S/F new legs of size 740x60x60mm made out of 1st class well seasoned teakwood duly fixing PVC rubber shoe at the bottom of legs with mild steel screws complete all as directed & shown on drg.(Drg No.FD- 30(M) / FD-1115)

Taking out old & u/s long rail and S&F new long rail made out of 1st class well seasoned teakwood complete all as directed and shown on drg.(Drg No.FD- 30(M) / FD-1115)

All as per item No. 28 here-in-before but short rail.(Drg No.FD- 30(M) / FD-1115)

All as per item No.7 here-in-before but for Table dining 4 Pers.(Drg No.FD- 30(M) / FD-1115)

(TABLE CENTRE)Remove the old unserviceable leg and providing the new leg made out of 1st class teak Wood seasoned of size 60x30x356mm high and fixing the same in its original position as per drg.(Drg No.FD-274/DB-3973)

Remove old broken top long rail and providing the new top long rail made out of 1st class hardwood teak of size 20x50x900mm and fixing the same in its original position as per drg.(Drg No.FD-274/DB-3973)

Remove old unserviceable top short rail and providing the new top short rail of size 20x50x450mm and shape made out of 1st class HW well seasoned teak and fixing the same in its original position as per drg.(Drg No.FD-274/DB-3973)

Remove the old top and providing the new top made out of 18mm particle board one side laminated exterior grade with 4mm teak wood beading all around and fixing the same on table centre in its original position as per drawing (Drg No.FD-274/DB-3973)

All as per item No 7 here in before but for Table centre.(Drg No.FD-274/DB-3973)

(TEAPOY)Remove the old unserviceable leg and providing the new leg of existing shape & size made out of 1st class hard seasoned teak wood free from knots duly french polished in its original position as per drg. (Drg No.FD-278/DB-3975)

Remove the old unsv existing top rail and supply and fixed new top rail made of 1st class hard seasoned teak wood free from knots duly french polished in its original position as per drg.(Drg No.FD-278/DB-3975)

Remove the old unsv existing short rail and supply and fixed new short rail made of 1st class hard seasoned teak wood free from knots duly french polished in its original position as per drg.(Drg No.FD-278/DB-3975)

Remove the old top and providing the new top of existing shape and size made out of 18mm particle board one side laminated exterior grade with 4mm teak wood beading all around and fixing the same on teapoy in its original position as per drawing and providing new hard rubber/PVC/Nylon shoes to the bottom of legs.(Drg No.FD-278/DB-3975)

Removing decayed each stiffener from its existing position and replace the same with new stiffner made out from well seasoned 1st class hard wood (Teak) all as shown on drawing.(Drg No.FD-278/DB-3975)

All as per item No 7 here in before but for Teapoy.(Drg No.FD-278/DB-3975)

(SOFA SET 5 SEATER)S&F for teak wood arms of sofa sets of required size including taking out unserviceable/damage "arms" complete all as specified and as shown on drawing.(Drg No.FD-373/281)

S&F for teak wood legs of sofa sets of required size including taking out unserviceable/damage "legs" complete all as specified and as shown on drawing.(Drg No.FD-373/281)

S&F for teak wood bottom of seat & back of sofa sets of required size including taking out unserviceable/damage "bottom of seat & back" complete all as specified and as shown on drawing.(Drg No.FD-373/281)

S&F for teak wood front/rear rails of sofa sets of required size including taking out unserviceable/damage "front/rear rails" complete all as specified and as shown on drawing.(Drg No.FD-373/281)

S&F for teak wood side rails of sofa sets of required size including taking out unserviceable/damage "side rails" complete all as specified and as shown on drawing.(3 seater & single seater).(Drg No.FD-373/281)

Removal of old unserviceable foam, cushion sofa set and supply and fixing new foam cushion 100mm thick 40/32 density covered with approved quality tapestry cloth (cost of tapestry cloth shall; not be less than Rs.450.00 per metre).(Drg No.FD-373/281)

Removal of old unserviceable tapestry cloth from each foam cushion sofa set and replace with new tapestry cloth of approved quality (cost of tapestry cloth shall not be less than Rs. 450.00 per metre).(Drg No.FD-373/281)

All as per item No.7 here-in-before but for Sofa set 5 seater.(Drg No.FD-373/281)

(TABLE DRESSING GENTS WITH MIRROR)Removing worn out u/s frame of mirror and replace the same with new one made out of well seasoned teak wood of existing shape & size in its original position as per drg and as directed by Engr-in-charge.(Drg No.FD-251/32(M))

Removing worn out u/s back ply of mirror and providing with new one ply wood 6mm thick of existing shape & size in its original position as per drg with clits on back and as directed by Engr-in-charge. (Drg No.FD-251/32(M))

Removing the worn out u/s broken mirror and replace the same with new one of existing shape & size 5.5mm thick and fixing the same in its original position as per drg.(Drg No.FD-251/32(M))

Removing worn out u/s top of table and providing the new one made out of pre-laminated particle board of existing shape & size and fixing the same duly beading in its original position as per drg.(Drg No.FD-251/32(M))

Removing worn out u/s back of table and providing the new one made out of prelaminated particle board of existing shape & size and fixing the same in its original position as per drg.(Drg No.FD-251/32(M))

Removing u/s worn out side of the table and providing the new one made out of prelaminated particle board of existing shape & size and fixing the same in its original position as per drg.(Drg No.FD-251/32(M))

Removing u/s worn out bottom of table and providing the new one made out prelaminated particle board of existing shape & size and fixing the same in its original position as per drg.(Drg No.FD-251/32(M))

Removing the u/s worn out face of drawer and providing the new one made out of 1st class teak wood plank well seasoned of existing shape & size and fixing the same in its original position.(Drg No.FD-251/32(M))

Remove side of drawer and providing the new one of existing shape & size (Back side) made out of 12mm thick well seasoned 1st class HW(Teak) and fixing the same in its original position.(Drg No.FD-251/32(M))

Remove side of drawer and providing the new one of existing shape & size made out of 12mm thick well seasoned 1st class HW(Teak) and fixing the same in its original position.(Drg No.FD-251/32(M))

Removing u/s ply from the bottom of drawer and providing the new one of 6mm thick BWR plywood of existing shape & size and fixing the same in its original position. (Drg No.FD-251/32(M))

Removing the u/s knobs and providing/fixing the new one chromium plated knob 40mm and as directed by Engr-in-Charge.(Drg No.FD-251/32(M))

All as per item No. 7 here-in-before but for table dressing gents.(Drg No.FD-251/32(M))

(CHAIR EASY)Remove of existing unserviceable under mentioned members and providing the new one made out of 1st class HW well seasoned (Teak) and fixing the same in its original position as per drg. Front Legs.(Drg No.FD-229/17(M))

Front rail of seat frame (Hole should be 12.5mm apart of each other)(Drg No.FD-229/17(M))

Side Rail(Ditto complete).(Drg No.FD-229/17(M))

Back Rail(Ditto complete).(Drg No.FD-229/17(M))

Arm Rest.(Drg No.FD-229/17(M))

Remove the existing unserviceable canning and supply and weave with 2 mm thick new white plastic cane oval shape Godrej pattern and beading with 4mm thick new white plastic cane make Ajay /premier as approval by Engr-in-charge and providing new hard rubber shoes on legs below of chair Easy.(Drg No.FD-229/17(M))

All as per item No.7 here-in-before but for Chair easy.(Drg No.FD-229/17(M))

(TABLE DRESSING LADIES WITH MIRROR)Remove unserviceable legs and providing the legs of existing shape & size made out of well seasoned teak wood and fixing the same in its original position as per drg.(Drg No.FD-251/DB-3980)

Remove unserviceable stiffener and providing the new one of existing shape & size made out of 1st class well seasoned teak wood and fixing the same in its original position as per drg.(Drg No.FD-251/DB-3980)

Remove unserviceable top and providing/fixing the new one made out of 18mm thick pre-laminated particle board of existing shape & size with 4mm thick teak wood beading on front side and fixing the same in its original position.(Drg No.FD-251/DB-3980)

Remove unserviceable side and providing the new one made out of 18mm thick pre-laminated particle board one side teak face and fixing the same in its original position.(Drg No.FD-251/DB-3980)

Remove side of drawer and providing the new one of existing shape & size made out of 12mm thick well seasoned 1st class HW(Teak) and fixing the same in its original position.(Drg No.FD-251/DB-3980)

All as per item No 74 here-in-before but back of drawer of existing shape & size as per drg.(Drg No.FD-251/DB-3980)

Remove the unserviceable ply wood from the drawer and providing/fixing the same with new one 6mm ply wood of existing shape & size.(Drg No.FD-251/DB-3980)

Remove the knob and providing the new one chromium plated 40mm as approved/directed by Engineer-in-charge and fixing the same in its original position.(Drg No.FD-251/DB-3980)

Remove broken sliding glass and providing new one of existing shape & size as approved by Engr-in-charge and fixing the same in its original position.(Drg No.FD-251/DB-3980)

Remove the unserviceable aluminum channel double and fixing the same as per drg.(Drg No.FD-251/DB-3980)

Remove unserviceable mirror frame from its original position and providing the new frame made out of teak wood well seasoned of existing shape & size and fixing the same in its original position as per drg.(Drg No.FD-251/DB-3980)

Remove the unserviceable broken mirror and providing the new one of size 1220x365x5.5mm thick as approved by Engineer-in-Charge and fixing the same in its original position.(Drg No.FD-251/DB-3980)

Remove the ply wood from the back of the mirror and providing the new one made out of 6mm green ply BWR commercial and fixing the same in its original position as per drg.(Drg No.FD-251/DB-3980)

All as per item No. 7 here-in-before but for table dressing ladies with mirror.(Drg No.FD-251/DB-3980)

M/S SINGH ENTERPRISE (BID ID -3332792)

M/S AMARNATH AGARWALLA (BID ID -3332885)

M/S New Builders Corporation (BID ID -3335451)