Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical TECHNICALLY QUALIFIED |
| 2 | Accepted-Technical | Accepted-Technical TECHNICALLY QUALIFIED |
Tender Value
₹9.0 L
EMD Value
₹17,993
Closing Date
18 Dec 2025, 2:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
THE CGM OCF AVADI
THE CHIEF GENERAL MANAGER, ORDNANCE CLOTHING FACTORY (UNIT OF TCL), AVADI, CHENNAI-54
Construction of new pump house building in OCF Estate
2025_TCL_255350_1
3655/CEO/e-OTE/010/25-26/CAP
Open Tender
Civil Works - Buildings
Works
120 days
OCF Avadi, Chennai
2 documents required · 2 mandatory
₹0
₹17,993
30 Dec 2025
15 Nov 2025
19 Dec 2025
15 Nov 2025
18 Dec 2025
15 Nov 2025
15 Nov 2025 - 8 Dec 2025
Demolition of Concrete of any description and in any position not otherwise specifically provided for
Demolition of brick work built in cement mortar
Removing demolished, excavated material exc. 500 m but in exc. 1.5Km and depositing where directed
Dismantling Asbestos cement sheet, including ridges & surrender to CE stores
Earth work exavation in trenches not exceeding 1.5M wide and 1.5m depth and getting out for pipe laying/foundation, harde/dense soil.
Returning, filling in, including spreading, levelling, watering and well ramming
M & L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering
M & L Sand filling under floors or in foundations including watering and consolidation
M & L for cement concrete in foundation,flooring type- D2, with Mix 1:4:8 using 40mm aggregate.
M & L for providing Reinforced cement concrete M.20 (20mm graded aggregate) for footing, plinth beam,bases of column, tie beam, side walls (OPC 53 Grade only)
M&L for providing Reinforeced cement concrete Type-B1 1:2:4 (20mm graded aggregate) for columns
M & L for providing Reinforced cement concrete M.20 (20mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like (OPC 53 Grade only)
Form work to sides of concrete foundations, footings, bases of columns & plinth beam , tie beam, lintel and similar work; on rough finished surface of concrete- flat surface
Formwork to sides of pillars, posts, struts, piers, columns and stanchions (square or rectangular design) on rough finished surface of concrete- flat surface
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick flat surface
Material & Labour for providing mild steel TMT bars 10mm dia & over for reinforcement cut to length, bent ot shape required including cranking for columns, hooking end & binding with M.S.wire (annealed) not less than 0.9mm dia or securing with clips etc. (Make: ARS, GBR- Fe 550)
Material & Labour for providing mild steel TMT bars 6mm to 8mm dia & over cut to length, bent to shape required including cranking for well steining and well curbs and binding with and including with M.S.wire (annealed) not less than 0.9mm dia or securing with clip etc. (Make: ARS, GBR- Fe 550)
M & L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 (only wire cut bricks)
Material & Labour for rendering 15mm thickness on brick work with using cement mortar 1:4 on walls and ceilings with smooth finish
M&L for preparation New surfaces and applying one coat primer and two coat of plastic emulsion on previously painted surface (Make Asian, Nerolac) for interior and exterior
S & F Rolled sections as in main and cross beams, for windows grill, entrance gate , hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates. Fe410-wGdeE-250)qualityA-(MES Approved brand with ISI)
S & F Anodised aluminium window andventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified
Supply & fixing of 2nd class hardwood plain, solid,straight chowkats and frames wrought , framed rebated on the solid rounded or chamferer d,put together with glue pinned at joints (Teak wood/vengai/padak) (50% of 172774.30 SSR2020)
Supply & fixing flush shutters , solid core con-structions, with block board core and plywood face panels , commercial type on both sides. Thickness in mm 30. if one face is covered with deco rative face veneer with lipping/frame to match
S & F of Rotational moulded polyethylene water storage tanks capacity 1000ltrs three layer white colour (Make: Sintex, Ashirvadh)
S & F of Unplasticised PVC pipes of pressure rating 10 kgf/cm fixed complete to walls, ceilings or in or in floors etc., any type of pipe bore in 25mm thickness
S & F of CPVC pipes SDR 11 & Plain CPVC SDR 11 with 20mm outer dia fittings on walls/ceiling or laying in floors or walls(concelled) complete including all fittings as specified.
S & F of pillar taps , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, and fly-nuts , screwed for iron pipe and fixed bore dia of pipe in 15mm (Make Parryware, jaguar, hindware)
M&L for fixing of 15mm dia Bib taps (ISI make) chromimium plated with crutch or butterfly handle screwed down for iron pipe complete, (Make: parry ware, Hindware, Jaguar)
S & F of PVC (SWR) floor trap 75 mm, plain with grating including jointing with solvent cement
S & F of stop valves fancy type chromium palted, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed bore dia of pipe in 15mm (Make: parry ware, Hindware, Jaguar)
Supply and fixing of Gun-metal ,globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed.size 25mm
M&L for fixing vitereous china squatting pan Orissa pattern size 680 x 470 mm white with integral foot-rest (excluding flsuhing cistern, flush pipe & waste pipe) complete including provision of concreate bedding using proper Waterproofing to the flooring as directed by EIC
S & F of PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with 10ltr is capscity (Make Parryware, jaguar, hindware)
M&L for laying of screed bed/bedding layer of 20mm thick using CM1:6 mix for laying vitrified tiles
S&F of Glazed ceramic tiles in vertical surfaces polished, area of each tiles surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with light shade
S&F of Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match (Light Shade)
S&F of Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match
M & L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete
M & L for preparing of new surfaces with one coat primer & Two coat synthetic enamel on steel surfaces of any description, over 10cm in width or girth,not otherwise described (Make Asian, Nerolac)
S & F Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane (4mm) thickness(Make: saint gobin, Asai)
Supply & fixing of Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples. With 304 grade
Supply & fixing PVC solid panel door shutter 30mm thick having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain color PVC sheet for top rail, lock rail & bottom rail and joined together with solvent cement in the frame at site as per specification & drawing.
Supply & fixing Solid PVC Door Frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube as per specification & drawing.
S & F of PVC (SWR) pipes bore in 110mm single socketed, in any length with rubber ring joints, laid in trenches or in floors (Make: Finolex, Trubore, Ashirvadh)
S&F of 75mm dia PVC (SWR) pipe single socket in any length with rubber ring joints fixed to trenches or in floors.
S& F of PVC(SWR) 110mm bends any radius
M&L for fixing of PVC SWR vent cowl 110mm dia.
S&F of PVC (SWR) junction single (Single T) 110 mm dia equal or unequal.
S&F of PVC (SWR) junction single (Single T) 75 mm dia equal or unequal.
S& F of PVC(SWR) 75mm bends any radius
M & L for white washing on new wall surfaces, ceilings with one coats
Dismantalling of wooden fillets, rails, posts, rafters,purlins, etc.Wooden section
Supply & providing of One light point or one fan point controlled by one switch with cables 1.5 sq.mm size copper conductor FRLS cable in PVC conduit on concealed wiring including material & labour with 14 SWG bare copper wire for earthing Make: Finolex,National,Orbit
Supply & fixing of switch piano flush type single pole one way 6 amps Make: Anchor penta type ,Oswal
Supply & fixing of PVC rectangular box /pressed steel terminal boxe for mounting swutches , socktes, fan regulator etc.with 3mm thickplastic/helum laminated sheet cover of size 350 x 300mm x 50mm deep
Supply & fixing of PVC rectangular box /pressed steel terminal boxe for mounting swutches , socktes, fan regulator etc.with 3mm thickplastic/helum laminated sheet cover of size 250 x 200 x 50 mm deep
Supply & fixing of PVC rectangular box /pressed steel terminal boxe for mounting swutches , socktes, fan regulator etc.with 3mm thickplastic/helum laminated sheet cover of size 175 x 100 x 50 mm deep
Supply & providing switch socket combination 3 pin 6A flush type (Make :-Anchor/Oswal/
Supply & providing switch socket combination 6/16A ,5 in 1 flush type (Make :-Anchor/Oswal/
Supply & fixing of ceiling rose,3 phase,PVC,polycarbonate ,isolated body of size 65 x 50mm three terminal Make: Anchor /Oswal
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges for concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth
Supply & providing Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR is PVC insulated copper conductor, single core cable of size 2x2.5Sqmm+1x2.5 Sqmm earthwire size in 1" PVC conduit on concealed wiring including material & labour Make: Finolex ,Havell's
Supply & providing Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR is PVC insulated copper conductor, single core cable of size 2x 4.0Sqmm+1x4.0 Sqmm earthwire size in 1" PVC conduit on concealed wiring including material & labour Make: Finolex ,Havell's
Supply & Fixing LED light fitting 1x 20Watts ,220V AC box type with driver ,holder including LED tube light connectin up with 3 core flexible copper conductor cable of suitable size from the ceiling rose complete Mke Philips,Havell's
Supply & fixing of sheet metal enclosure for MCB DB Single pole & netural 08 way double door 230V Make:Schneider,Legrand
Supply and fixing of SPN 32 AMP rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning. ,Make:L&T,Legrand ,Havell's,Seimens
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)
Supply & Fixing of Exhaust fan ,steel body AC Single phase ,230Vof size ,copper winding of 300mm sweep with blades and frame and louvers shutters Make:Almonard,Cromption,Usha , Orient
Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete Make:Philips,Havells,Cromption,Wipro
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.83 MB
BOQ_294288.xls
BOQ • 0.40 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .