Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹3.1 L
Closing Date
16 Jun 2025, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Engineering Wing of Health and Family Welfare Department
Assistant Engineer
CONSTRUCTION OF 500 KLD STP (SBR TECHNOLOGY) TO THE NEWELY CONSTRUCTED 450 BED HOSPITAL AT KRIMS, KARWAR IN UTTAR KANNADA DISTRICT
EWHFWD/2024-25/BD/WORK_INDENT857
EWHFWD/2024-25/BD/WORK_INDENT857
Open
Buildings
Two Tender Document System(Two Cover)
EWHFWD Chief Engineer Office Bengaluru
5 documents required · 5 mandatory
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
List of Financial Resources with Certificates
Clause ITT 3.2(b)To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2020-21 to 2024-25) The tenderer should have been Satisfactorily completed at least one Similar nature work of value not less than Rs.103.50 Lakhs as prime contractor. Note : The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/autonomous bodies of Government will be considered for the clause ITT 3.2 (b).
Clause ITT 3.2(c) To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2020-21 to 2024-25). Executed in any one year, the following minimum quantities of work Sl. No Description of key items of works Quantity 1) Earthwork Excavation 1246.00 Cum 2)RCC and PCC 364.00 Cum, 3)Steel Reinforcement for RCC work 46.00 Tonnes 4) Cement Concrete Block Masonry/Solid Block Masonry etc. 125.50 Sqm, 5)Plastering 1274.00Sqm, 6)Painting 792.00 Sqm. Note -The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/Semi Government/Government undertaking/autonomo us bodies of Government will be considered for the clause ITT 3.2 (c).
Clause ITT 3.3 (a)Equipment capacity Each tenderer should further demonstrate(a) available by owning at least 50% of the required/specified key and critical equipment for this work and (b) the remaining 50% can be deployed on ease/hire basis for all works provided, the relevant documents (commitment agreements etc.,) for availability for this work are furnished. Sl. No. Description of Equipment Quantity 1. Min 10 cft capacity Concrete Mixer 2 Nos. 2.Steel Centering sheets -500 Sqmtrs. 3.Tipper-2 Nos & 4.Excavator-1 No.
List of Minimum Key Personnel to be deployed by the contractor at site for Contract work Sl No Position Qualification and Requirement No of Persons 1.Site Engineer .E. Civil with minimum experience of 7 years in the Construction of buildings Or Diploma in Civil Engineering with minimum experience of 10 years in the Construction of buildings and should have been working in permanent role of the organization for at least two years -1 No.(One) Note: Degree certificate and Experience Certificate to be furnished.
KPWD Class-II & Above Registration Certificate.
Clause ITT 3.2(a):To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2020-21 to 2024-25) The tenderer should have been achieved in at least two financial years a minimum annual financial turnover (in all classes of civil Engineering construction works only) of Rs.413.50 Lakhs. Note:a)For Clause ITT 3.2(a) the certificate duly certified by the charted accountant is to be submitted.Certified balance sheet by Chartered Accountant.
Clause ITT 3.3(b)Liquid assets and /or availability of credit facilities of not less than Rs.62.00 Lakhs (Credit lines / letter of credit/ certificates from banks for meeting the fund requirement etc.(As per the prescribed format in clause 1.10 of SECTION 3, QUALIFICATION INFORMATION of this document.) as prime Contractor.
Clause ITT 3.6 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated for prime contractor are as under Assessed available tender capacity AxNx1.5-B Where A maximum value of civil engineering works executed in any one year during the last five years 2020-21 to 2024-25 updated to 2025-26 price level taking into account the completed as well as works in progress. N Number of years prescribed for completion of the works for which tenders are invited. B Value, at 2025-26 price level of existing commitments and ongoing works to be completed during the next 6 months. Note. The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.
₹5,000
₹3.1 L
16 May 2025
16 May 2025
17 Jun 2025
5 Jun 2025
6 Jun 2025
CONSTRUCTION OF 500 KLD STP (SBR TECHNOLOGY) TO THE NEWELY CONSTRUCTED 450 BED HOSPITAL AT KRIMS, KARWAR IN UTTAR KANNADA DISTRICT- Electro mechanical works
Supplying, laying, jointing, testing and commissioning of GI pipes conforming to IS1239:1990 with latest amendments including fixing collars, elbows, tees, bends, gland cocks and other fittings (exclu...
Supplying, laying, jointing, testing and commissioning of GI pipes conforming to IS1239:1990 with latest amendments including fixing collars, elbows, tees, bends, gland cocks and other fittings (exclu...
Supplying, laying, jointing, testing and commissioning of GI pipes conforming to IS1239:1990 with latest amendments including fixing collars, elbows, tees, bends, gland cocks and other fittings (exclu...
Supplying, laying, jointing, testing and commissioning of GI pipes conforming to IS1239:1990 with latest amendments including fixing collars, elbows, tees, bends, gland cocks and other fittings (exclu...
Miscellaneous Piping and Specials
Items Included: Valves, non-return valves (NRVs), elbows, tees, unions, reducers, gaskets, supports
Material: UPVC/HDPE/SS/GI as per process requirement
Function: Com...
Bar Screen Unit
Type: Manually cleaned bar screen assembly
Material: Stainless Steel (SS304)
Size: Approx. 1000 mm (L) x 700 mm (H)
Bar Spacing: 10 mm
Function: To trap large solids and floating debri...
Twin Lobe Roots Blower SBR Reactors
Type: Positive displacement twin lobe blower
Capacity: Approx. 400 cum/hr at 0.5 Kg/sqm discharge pressure
Construction: CI/SS body with suitable oil-lubricated gea...
Twin Lobe Roots Blower EQT, DCT, SHT
Type: Twin lobe roots blower
Capacity: Approx. 100 cum/hr at 0.5 Kg/sqm
Motor & Accessories: Similar to item 2
Application: Used for aeration and agitation in Equa...
Fine Bubble Membrane Diffusers
Type: EPDM-based tubular diffusers
Size: 90 mm diameter x 1000 mm length
Installation: On hot-dip galvanized (GI) header pipe, retrieval-type mounting
Function: Provides...
Coarse Bubble Diffusers
Type: Disc-type EPDM diffusers
Size: 50 mm diameter
Application: Installed in Equalization and Sludge Tanks for mixing and coarse aeration
---- etc., complete with all lead
Pressure Sand Filter (PSF)
Construction: Mild steel pressure vessel, epoxy coated internally and externally
Size: Diameter 1800 mm x Height 1500 mm
Media: Dual graded silica sand
Fittings: Frontal pip...
Activated Carbon Filter (ACF)
Construction: MS epoxy-coated vertical pressure vessel
Size: 1800 mm dia x 1500 mm height
Media: Activated carbon (iodine value 900 mg/g)
Accessories: Inlet/outlet nozzle...
Raw Effluent Pumps
Type: Centrifugal, non clog submersible pumps
Capacity: 40 cum/hr @ 15 m head
Power: Suitable 3 phase motor
Design: Capable of handling solids up to 25 mm
Installation: Two working ...
Sludge Transfer Pumps
Type: Non-clog centrifugal/sludge pump
Power: 2 HP motor
Application: Transfers settled sludge from SBR tanks or sludge thickener to holding/dewatering unit.
Configuration: One w...
Filter Feed Pumps
Type: Horizontal centrifugal pump
Capacity: 35 cum/hr @ 30 m head
Motor: 7.5 HP, 3-phase
Configuration: One working, one standby
Function: Feeds tertiary treatment units (PSF/ACF). -...
Chlorination System
Type: Online dosing system
Components: Dosing pump, chemical tank (HDPE), suction-discharge piping
Function: Final disinfection of treated effluent to meet CPCB discharge norms. --...
Decanting Mechanism
Type: Motorized floating-type decanter
Material: SS/HDPE floating pipe with automatic float valve
Function: Decants treated water from SBR cycle without disturbing settled sludge. ...
Automation and Instrumentation
Components: DO meters, level sensors, cycle timers, solenoid valves, SCADA/PLC control
Purpose: Semi/fully automatic control of STP cycles, alarms, and monitoring ---- e...
Butterfly Valves
Material: Cast iron/ductile iron body with EPDM/NBR liner
Operation: Lever-operated or gearbox as required
Application: Installed on discharge lines of pumps, blowers, and...
MCC Panel (Motor Control Center)
Type: Floor-mounted, powder-coated MS panel with internal copper busbar
Control: PLC-based automation system
Features: MCBs, contactors, overload relays, VFD (as neede...
Electrical Cabling
Type: PVC insulated armoured copper cable
Specs: 4 core x 4 sq.mm for pumps; 4 core x 6 sq.mm for blowers
Laying: With suitable cable trays/conduits and terminations. ---- etc., com...
Treated Water Transfer Pumps
Type: Horizontal centrifugal pump
Capacity: Suitable for 7.5 HP, 3-phase operation
Design: Capable of handling 25 mm solids
Application: Transfers treated water for reuse ...
Sludge Dewatering System
Type: Screw press or belt press
Material: SS304 wetted parts with control panel
Compliance: Designed as per CPCB and KSPCB norms
Function: Dewaters excess sludge from SBR or h...
CONSTRUCTION OF 500 KLD STP (SBR TECHNOLOGY) TO THE NEWELY CONSTRUCTED 450 BED HOSPITAL AT KRIMS, KARWAR IN UTTAR KANNADA DISTRICT- Civil Work
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 1.5 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ...
Earth work excavation for Foundation by mechanical means for all works & depth upto 1.5 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ...
Earth work excavation for Foundation by mechanical means for all works & depth upto 1.5 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ...
Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. ---- etc., complete with all lead
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...
STP (inside) waterproofing with Anticorrosive & Protective Coating Providing and Applying two component coal tar epoxy-based coating on inside surface of Sewage & Effluent treatment tank at 0.30 kg/m2...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions ...
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...
Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elasto...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & ...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW-4 Indent No.857 STP Karwar.docx
Tender Document • 1.30 MB
technical_specifications.doc
Instructions to Tenderers • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .