Estimate for Providing gravitational distribution System network for villages Jindwari, Nangali, Behlu etc. in Changer area of Shri Anandpur Sahib

Amount

Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation including the cost of diversion for traffic, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. B Mechanical Means (a) Depth upto 3m

Cement Concrete 1:3:6 with (i) stone ballast or shingle mixing by mechanical means using concrete mixer volumetric type

Providing and filling sand grading as per specifications or fine grade around the various sizes of G.I. pipes in external work

Reinforced cement concrete M-25 with cement @375/kg per cum hand mixed but excluding steel reinforcement centring and shuttering in foundation and Plinth

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth

12.5 mm thick cement plaster 1:4

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)

Cement concrete 1:2:4 With stone ballast or shingle mixing by mechanical means using concrete mixer volumetric type

Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC including bending and placing in postion complete.

Supply and installation of alfa valve including fittings etc complete in all aspects of 90 mm with anti theft mechanism

Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing&cost of Nut ,Bolt & insertion sheet, all carriage complete (with theapproval of Engineer in charge). Class PN-1.6 as per ISI B. (a) 50mm i/d Sluice Valves flanged

Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing&cost of Nut ,Bolt & insertion sheet, all carriage complete (with theapproval of Engineer in charge). Class PN-1.6 as per ISI B. (a) 63mm i/d Sluice Valves flanged

Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing&cost of Nut ,Bolt & insertion sheet, all carriage complete (with theapproval of Engineer in charge). Class PN-1.6 as per ISI B. (a) 75mm i/d Sluice Valves flanged

Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing&cost of Nut ,Bolt & insertion sheet, all carriage complete (with theapproval of Engineer in charge). Class PN-1.6 as per ISI B. (a) 90mm i/d Sluice Valves flanged

Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing&cost of Nut ,Bolt & insertion sheet, all carriage complete (with theapproval of Engineer in charge). Class PN-1.6 as per ISI B. (a) 110mm i/d Sluice Valves flanged

Providing & fixing double air valve ISI Markedasper IS-14845 including jointing all carriages complete. (a) C.I Double air valve (Size 40mm)

Providing,Laying, fixing & jointing of U.P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients,cutting, jointing and testing complete as per specifications. 110 mm o/d pipe of 4 Kgf. / sqcm

Providing,Laying, fixing & jointing of U.P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients,cutting, jointing and testing complete as per specifications. 90 mm o/d pipe of 4Kgf. / sqcm

Providing,Laying, fixing & jointing of U.P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients,cutting, jointing and testing complete as per specifications. 75 mm o/d pipe of 4 Kgf. / sqcm

Providing,Laying, fixing & jointing of U.P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients,cutting, jointing and testing complete as per specifications. 63 mm o/d pipe of 4 Kgf. / sqcm

Providing,Laying, fixing & jointing of U.P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients,cutting, jointing and testing complete as per specifications. 50 mm o/d pipe of 6 Kgf. / sqcm

Providing,Laying, fixing & jointing of U.P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients,cutting, jointing and testing complete as per specifications. 40 mm o/d pipe of 6 Kgf. / sqcm

Providing and fixing Elbow/Bends of 90°6kg/cm2 pressure as per IS 4985 including testing Comissioning and Complete in all respect to the specifications of Engineer in Charge. Dia 40mm

Providing and fixing Elbow/Bends of 90°6kg/cm2 pressure as per IS 4985 including testing Comissioning and Complete in all respect to the specifications of Engineer in Charge. Dia 50mm

Providing and fixing Elbow/Bends of 90°6kg/cm2 pressure as per IS 4985 including testing Comissioning and Complete in all respect to the specifications of Engineer in Charge. Dia 63mm

Providing and fixing Elbow/Bends of 90°6kg/cm2 pressure as per IS 4985 including testing Comissioning and Complete in all respect to the specifications of Engineer in Charge. Dia 75mm

Providing and fixing Elbow/Bends of 90°6kg/cm2 pressure as per IS 4985 including testing Comissioning and Complete in all respect to the specifications of Engineer in Charge. Dia 90mm

Providing and fixing Elbow/Bends of 90°6kg/cm2 pressure as per IS 4985 including testing Comissioning and Complete in all respect to the specifications of Engineer in Charge. Dia 110mm

Providing and fixing Elbow/Bends of 45°6kg/cm2 pressure as per IS 4985 including testing Comissioning and Complete in all respect to the specifications of Engineer in Charge. Dia 110mm

Providing and fixing Elbow/Bends of 45°6kg/cm2 pressure as per IS 4985 including testing Comissioning and Complete in all respect to the specifications of Engineer in Charge. Dia 90mm

Providing and fixing Elbow/Bends of 45°6kg/cm2 pressure as per IS 4985 including testing Comissioning and Complete in all respect to the specifications of Engineer in Charge. Dia 75mm

Providing and fixing Elbow/Bends of 45°6kg/cm2 pressure as per IS 4985 including testing Comissioning and Complete in all respect to the specifications of Engineer in Charge. Dia 63 mm

Providing and fixing Elbow/Bends of 45°6kg/cm2 pressure as per IS 4985 including testing Comissioning and Complete in all respect to the specifications of Engineer in Charge. Dia 50 mm

Providing and fixing Elbow/Bends of 45°6kg/cm2 pressure as per IS 4985 including testing Comissioning and Complete in all respect to the specifications of Engineer in Charge. Dia 40mm

Providing and fixing Reducer Size 110mm to 90mm of 6 kg/cm2 pressure including testing Comissioning and Complete in all respect to the specifications of Engineer in Charge.

Providing and fixing Reducer Size 90mm to 75mm of 6 kg/cm2 pressure including testing Comissioning and Complete in all respect to the specifications of Engineer in Charge.

Providing and fixing Reducer Size 75mm to 63mm of 6 kg/cm2 pressure including testing Comissioning and Complete in all respect to the specifications of Engineer in Charge.

Providing and fixing Reducer Size 63mm to 50mm of 6 kg/cm2 pressure including testing Comissioning and Complete in all respect to the specifications of Engineer in Charge.

Providing and fixing Reducer Size 50mm to 40mm of 6 kg/cm2 pressure including testing Comissioning and Complete in all respect to the specifications of Engineer in Charge.

Providing and fixing EqualTee of 6kg/cm2pressure as per IS 4985 including testing Comissioning and Completein all respect to the specifications of Engineer in Charge. Dia 40mm

Providing and fixing EqualTee of 6kg/cm2pressure as per IS 4985 including testing Comissioning and Completein all respect to the specifications of Engineer in Charge. Dia 110mm

Providing and fixing EqualTee of 6kg/cm2pressure as per IS 4985 including testing Comissioning and Completein all respect to the specifications of Engineer in Charge. Dia 50mm

Providing and fixing EqualTee of 6kg/cm2pressure as per IS 4985 including testing Comissioning and Completein all respect to the specifications of Engineer in Charge. Dia 63mm

Providing and fixing EqualTee of 6kg/cm2pressure as per IS 4985 including testing Comissioning and Completein all respect to the specifications of Engineer in Charge. Dia 75mm

Providing and fixing EqualTee of 6kg/cm2pressure as per IS 4985 including testing Comissioning and Completein all respect to the specifications of Engineer in Charge. Dia 90mm

Providing and fixingCast Iron Adapter of 6kg/cm2 pressure including testing Comissioning and Complete in all respectto the specifications of Engineer in Charge.Dia 110mm

Providing and fixingCast Iron Adapter of 6kg/cm2 pressure including testing Comissioning and Complete in all respectto the specifications of Engineer in Charge.Dia 90mm

Providing and fixingCast Iron Adapter of 6kg/cm2 pressure including testing Comissioning and Complete in all respectto the specifications of Engineer in Charge.Dia 75mm

Providing and fixingCast Iron Adapter of 6kg/cm2 pressure including testing Comissioning and Complete in all respectto the specifications of Engineer in Charge.Dia 63mm

Providing and fixingCast Iron Adapter of 6kg/cm2 pressure including testing Comissioning and Complete in all respectto the specifications of Engineer in Charge.Dia 50mm

Any Other Items

THE NEW MODERN CO OP L/C SOCIETY LIMITED BARODI (BID ID -707417)