Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance 14 147 VASUNDHRA GHAZIABAD SECTOR 14 VASUNDHRA VASUNDHRA GHAZIABAD UTTAR PRADESH 201012 | GHAZIABAD | UTTAR PRADESH | 201012 | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹82.2 L
EMD Value
₹82,240
Closing Date
20 Aug 2024, 2:10 pmClosed
SE, EUDC-I, NOIDA
33/11 KV SUBSTATION, SECTOR-18 FIRST FLOOR, OPPOSITE SAB MALL, NOIDA
UNDERGROUND CABLE WORK UNDER EUDD 1 NOIDA
2024_PVVNL_946398_1
17/EUDC-I/2024-25/NOIDA (WORKS) SHORT TERM
Open Tender
Electrical Works
Item Rate
IN AREA OF EUDSD-IV, NOIDA
Please refer Tender documents.
2 documents required · 2 mandatory
₹3,540
EE, EUDD-I, NOIDA
₹82,240
27 Aug 2024
15 Aug 2024
20 Aug 2024
15 Aug 2024
20 Aug 2024
15 Aug 2024
Amount
Cartage of following material from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to various points site of work including loading and unloading at both ends : -
ST Pole 11 Meter long SP-55.
11 KV XLPE Cable of size 3x185 Sq.mm.
11 KV XLPE Cable of size 3x120 Sq.mm for jumper.
O/D cable jointing Kit suitable for 11 KV 3x185 Sq.mm. XLPE cable.
ACSR Dog Conductor.
Earthing complete.
11 KV Pin Insulator with pin.
Top channel 125x100x6mm, 3200 mm.
Dropper channel 125x100x6mm, 3200 mm.
3 PH-4W, Static TVM, 11 KV.
AMR Modem.
11 KV Pilfer proof metering cubical 200/5.
Outdoor CT/PT unit, 11 KV 200/5.
Providing of following material of standard make / best quality for complete the work as per site requirement by the contractor at his own cost : -
Number plate with clamp.
Danger board with clamp.
MS Clamp for Top channel 125x100x6mm, 3200 mm.
MS clamp for Dropper channel 125x100x6mm, 3200 mm.
Barbed wire.
Draw marking on cable at yellow base.
Aluminium paint.
Aluminium binding wire.
Aluminium crimping lug 120 Sq.mm. long barrel.
Stone pad 300x300x75mm.
MS Clamp with nut & bolts.
Nut bolt & washer (GI coated).
Concreting of pole.
Sundries item.
M.S. Nut & bolt.
G.I. Pipe 6 inch dia & 3 Mtr. long for hoisting.
RCC / Stone Route Marker yellow colour with proper marking.
Outdoor CT/PT unit, 11 KV 200/5.
11 KV Outdoor jointing kit of Raychem/ 3M/ Denson make suitable for 11 KV 3x185 sq.mm. XLPE cable
Fixing of following material as per site requirement complete in all respects : -
Number plate with clamp.
Danger board with clamp.
MS Clamp for Top channel 125x100x6mm, 3200 mm.
MS clamp for Dropper channel 125x100x6mm, 3200 mm.
Barbed wire.
Draw marking on cable at yellow base.
Aluminium paint.
Aluminium binding wire.
Aluminium crimping lug 120 Sq.mm. long barrel.
Stone pad 300x300x75mm.
MS Clamp with nut & bolts.
Nut bolt & washer (GI coated).
Concreting of pole.
Sundries item.
M.S. Nut & bolt.
G.I. Pipe 6 inch dia & 3 Mtr. long for hoisting.
RCC / Stone Route Marker yellow colour with proper marking.
Outdoor CT/PT unit, 11 KV 200/5.
11 KV Outdoor jointing kit of Raychem/ 3M/ Denson make suitable for 11 KV 3x185 sq.mm. XLPE cable
The Excavation of foundation pit in CC road/ mix soil/ normal soil/ soft & hard rack by using heavy duty compressor and its back filling and leveling etc. The size of the pit will be 600x600x1800 mm for each pole and having a depth of 1/6 of the full length of the support.
Fabrication & fixing of MS channel / Angle as per site requirement complete in all respects.
Erection of Double pole structure on 11 Mtr. long ST Pole for 11 KV line including fixing of all accessories of 11KV line as per RESPO schedule Complete in all respects.
Grouting of each pole (In ratio of 1:4:8 in Cement, sand and Brick Ballast) in size 450mmx450mmx1800 mm as per RESPO schedule Complete in all respects.
Construction of Plinth in size 450x450x300 mm of each (0.880 Cu.m) pole above the ground level (In ratio of 1:3:6 in Cement, sand and Brick Ballast) as per RESPO schedule Complete in all respects.
Excavation of earth and driving of M.S. earthing rod of size 20x2500 mm in earth and jointing through G.I wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts etc. as per RESPO schedule Complete in all respects.
Drilling of dia 160 mm by trenchless method by horizontal boring machine at a depth of 1.5 mtrs below the ground level for D/C laying of cable complete in all respects.
Providing of 06 Mtr long pieces of HDPE pipe (4 Kg / m2) 6 Inch Dia PN 4 PE 63 (PVVNL approved) after inspection of competent committee at manufacturing site of the items with actual guarantee period.
Laying and interconnecting of above 06 Mtr long pieces of HDPE pipe 6 inch Dia PN 4 PE 63 (PVVNL approved) in trench for D/C laying of cable complete in all respects..
Digging of pits of size 4 mtr x 4 mtr x 1.5 mtr for cable loop.
Providing of HDPE Socket suitable for HDPE pipe 6 inch dia.
Fixing of above HDPE Socket 11 KV XLPE Cable 3x185 Sq.mm. and 6 inch dia pipe.
Road Restoration charges for hot mixed pakka road / CC road / kaccha road / mix soil/ normal soil/ soft & hard rack as it is when start of work as per authority norms.
Laying and pulling of 11 KV XLPE Cable 3x185 Sq.mm. through HDPE pipe complete in all respects.
Laying of 11 KV XLPE Cable 3x185 Sq.mm. at D/P & in loop & riser complete in all respects.
Hi port test for 11 KV 3x185 sq.mm XLPE cable.
Hoisting of 11 KV 3x185 sq mmXLPE cable on double pole structure through GI pipe 6 inch dia 3 mtr long fixed on pole structure including its jumpering complete with clamps, bolts and nuts.
Laying, Lifting and final Binding, Sagging of ACSR Dog Conductor including fixing of all accessories as per RESPO schedule Complete in all respects.
Jumpering by 11 KV XLPE Cable of size 3x120 Sq.mm with complete in all respects.
Errection & Commissioning of 11 KV Pilfer proof metering cubical 200/5 as per RESPO norms complete in all respects.
Errection & Commissioning of 11 KV CT/PT unit 200/5 as per RESPO norms complete in all respects.
3 PH-4W, Static TVM, 11 KV.
AMR Modem.
P R POWER SOLUTIONS
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .