Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Ref. No.
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
Closing Date
28 Aug 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Saurabh Agrawal
NR1 RHQ, FARIDABAD
Construction of residential quarters at Bikaner (Rajasthan)
NR1/NT/W-CIVIL/DOM/I00/23/02605
Open
Construction Works
Works
Bikaner
As per QR document of bidding documents
₹25,000
28 Aug 2023
27 Jun 2023
30 Aug 2023
27 Jun 2023
28 Aug 2023
27 Jun 2023
19 Jul 2023
Name of Package Construction of residential quarters at Bikaner (Rajasthan)
Tender Enquiry Ref No.: NR1/NT/W-CIVIL/DOM/I00/23/02605 dated 11.05.2023 (Rfx: 5002002740)
Construction of residential quarters at Bikaner (Rajasthan)
NR1/NT/W-CIVIL/DOM/I00/23/02605 dated 11.05.2023 (Rfx: 5002002740)
1 Fill up only green shaded cells in Sch-2,3,4,5,6 and Bid Form 2nd Envelope.
2 Only the green cells in Schedule-1 are to be filled. No othe cell is to be filled by the bidder except green cell. The total amount including GST shall be calculated automatically.
3 Instructions / error messages, if any, will be displayed automatically after selecting the cell.
4 After filling up all the schedues, save the file, take print out of all the schedules and Bid form and sign & stamp and submit them as hard copy of the 2nd envelope (Price part) of the bid. Also ensure to submit the soft copy of the the same file on CD/ DVD.
पावर ग्रिड कारपोरेशन ऑफ इण्डिया लिमिटेड
(भारत सरकार का उद्यम)
Power Grid Corporation of India Limited
(A Government of India Enterprises)
I While filling up the worksheets following may please be observed :
(i) Fill up only green shaded cells.
(ii) Certain data type entries have been restricted, such as Numeric values or limits of numeric values.
(iii) Select only the options provided in pull down menus.
(iv) Do not link any cell of this work book with any other work book.
(v) Do not use copy & paste or cut & paste options for filling up the data.
(vi) Do not drag any cell value to fill down cells to it.
(vii) Do not reformat any of the cell of the work book.
II This Workbook consists of following worksheets :
Opening page of the workbook.
Names of Bidder :
● Select nos. of the JV Partners other than the Lead Partner from drop down menu.
● In case of JV partners more than 2, enter details of 3rd & more partners along with details of 2nd partner.
● Fill up names and address of the Sole Bidder. Do not leave this cell blank.
● Fill up date in dd-mmm-yyyy format from drop down menu.
● Click for Sch-1 given at the right top of the worksheet to go to Sch-1.
● Fill up unit rates for all the items in numeric values greater than 0 (zero). If unit rate is left blank, the corresponding item shall be deemed to be included in the total price.
● Total amount shall get calculated automatically.
● Summary of all the Schedules without considering discount (mentioned in the work sheet discount) shall be displayed automatically.
● No cell is required to be filled in by the bidder in this worksheet.
Sch-7 (Type Test Charges) :
● Fill up the rates & location where type tests are proposed.
● Total of this Sch-7 shall automatically appear in Sch-1.
Bid from 2nd Envelope :
● Fill up ref. no. as bidder's ref no. of this letter.
● This letter shall consider the net price as per Sch-2B After Discount.
● Fill up names & Designation of the representatives of bidder.
● Fill up additional information as required.
Happy Bidding !
Construction of residential quarters at Bikaner (Rajasthan)
NR1/NT/W-CIVIL/DOM/I00/23/02605 dated 11.05.2023 (Rfx: 5002002740) Sole Bidder 1
JV (Joint Venture) 2 or More
Enter following details of the bidder
Specify type of Bidder [Select from drop down menu] Sole Bidder 0
Address of Bidder
Whether the bidder is a MSE firm (Upload Udyam Certificate Yes
Name of the registering Authority No
Name of contact Person of bidder
Designation of contact Person of bidder
Email Id of contact Person of bidder
Mobile no. of contact Person of bidder
Date 27 Jun 2023 30 2023 1 Jan
Construction of residential quarters at Bikaner (Rajasthan) Schedule - 1
NR1/NT/W-CIVIL/DOM/I00/23/02605 dated 11.05.2023 (Rfx: 5002002740)
(SCHEDULE OF RATES AND PRICES )
Bidder’s Name and Address To:
Name : Contracts & Material
Address : Power Grid Corporation of India Ltd.,
SCO-5-10, Beside PCB Building,
Sector 16A, Faridabad, Haryana- 121002
(Adjacent to Metro Hospital)
All Prices are in Indian Rupees.
S.No. Ref. of DSR 2021 Item/MR Item Description Unit Quantity Rate of GST applicable ( in %) Whether rate of GST in column ‘7’ is confirmed. If not indicate applicable rate of GST # (Select suitable GST rate from Dropdown) Unit Price (enter unit rate upto two decimal places) Total Amount (excluding GST) GST Amount
1 2.25(a) Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete for site leveling work. cum 6000.00 18% Included 0.00
2 2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge : All kinds of soil cum 3163.45 18% Included 0.00
3 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. CUM 931.47 18% Included 0.00
4 2.26.1 Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. cum 159.06 18% Included 0.00
5 2.27 Supplying and filling in plinth with Local sand under floors, including watering, ramming, consolidating and dressing complete. cum 185.06 18% Included 0.00
6 2.28.1 Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m: All kinds of soil sqm 9200.00 18% Included 0.00
7 2.34.1 Supplying chemical emulsion in sealed containers including delivery as specified : Chlorpyriphos/ Lindane emulsifiable concentrate of 20% litre 859.00 18% Included 0.00
8 2.35.3.1 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration sqm 293.48 18% Included 0.00
9 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) cum 565.48 18% Included 0.00
10 4.11 Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). sqm 154.47 18% Included 0.00
11 4.13 Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. sqm 154.47 18% Included 0.00
12 4.17 Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. sqm 437.88 18% Included 0.00
13 5.9.1 Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete sqm 575.45 18% Included 0.00
14 5.9.2 Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. sqm 490.08 18% Included 0.00
15 5.9.3 Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform sqm 4642.02 18% Included 0.00
16 5.9.4 Centering and shuttering including strutting, propping etc. and removal of form for : Shelves (Cast in situ) sqm 5.00 18% Included 0.00
17 5.9.5 Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers sqm 4471.59 18% Included 0.00
18 5.9.6 Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts sqm 3313.19 18% Included 0.00
19 5.9.7 Centering and shuttering including strutting, propping etc. and removal of form for : Stairs, (excluding landings) except spiral-staircases sqm 116.40 18% Included 0.00
20 5.9.14 Extra for shuttering in circular work (20% of respective centering and shuttering items) sqm 10.00 18% Included 0.00
21 5.9.15 Centering and shuttering including strutting, propping etc. and removal of form for : Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like sqm 4.00 18% Included 0.00
22 5.9.16.1 Centering and shuttering including strutting, propping etc. and removal of form for : Edges of slabs and breaks in floors and walls - Under 20 cm wide metre 178.00 18% Included 0.00
23 5.22.6 & 5.22A.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 233312.50 18% Included 0.00
24 5.33.1.1 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement All works upto plinth level : Concrete of M25 grade with minimum cement content of 330 kg /cum cum 789.00 18% Included 0.00
25 5.33.2.1 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement All works above plinth level upto floor V level : Concrete of M25 grade with minimum cement content of 330 kg /cumAll works cum 1106.00 18% Included 0.00
26 5.35 Add for using extra cement in the items of design mix over and above the specified cement content therein. quintal 813.91 18% Included 0.00
27 5.44.1 Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical localtion in load application areas that accommodates multi directional seismic movement without stress to it's components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self- centering arrangement that freely rotates / moves in all directions. The Self - centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in- Charge. (Material shall confirm to ASTM 6063). Floor Joint of 100 mm gap metre 67.28 18% Included 0.00
28 5.45.1 Providing and fixing of expansion joint system related with wall joint (internal/external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063). Wall Joint of 100 mm gap metre 24.00 18% Included 0.00
29 5.46.1 Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminum base members with, self aligning and self centering arragement support plates asper ASTM B221-02. The system shall be such that it provides watertight roof to roof/roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminum base member designed to accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063). Roof Joint of 100 mm gap metre 16.82 18% Included 0.00
30 6.1.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) cum 659.57 18% Included 0.00
31 6.4.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) cum 667.21 18% Included 0.00
32 6.13.1 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement :3 coarse sand) sqm 1313.17 18% Included 0.00
33 6.15 Extra for providing and placing in position 2 Nos 6mm dia with stirrup. M.S. bars at every third course of half brick masonry. sqm 1313.17 18% Included 0.00
34 7.38.1.1 Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade. 8mm thick (mirror polished and machine cut edge) Granite stone of any colour and shade sqm 56.85 18% Included 0.00
35 8.2.2.1 Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished machine cut granite for kitchen platforms, vanity counters, window sills, fascias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red, Area of slab upto 0.50 sqm Sqm 39.36 18% Included 0.00
36 8.2.2.2 Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished machine cut granite for kitchen platforms, vanity counters, wondow sills, fascias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red (area of slab over 0.50 sqm) Sqm 125.00 18% Included 0.00
37 8.3.2 Extra for providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. : Granite work metre 236.20 18% Included 0.00
38 8.4 Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. metre 510.00 18% Included 0.00
39 8.5 Extra for providing opening of required size and shape for wash basin/kitchen sink in kitchen plateform, vanity counters and similar location in granite work including necessary holes for pillar taps etc. including rubbing and polishing to cut edges etc. complete. each 99.00 18% Included 0.00
40 8.13.1 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite,Brown,Cat Eye or equivalent sqm 50.66 18% Included 0.00
41 8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. sqm 1308.49 18% Included 0.00
42 9.1.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood cum 1.00 18% Included 0.00
43 9.20.1 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm 183.40 18% Included 0.00
44 9.23 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). sqm 183.40 18% Included 0.00
45 9.40.1.2 Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete :50 x 20 mm RMTR 92.00 18% Included 0.00
46 9.62.1 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 300 x 16 mm Each 208.00 18% Included 0.00
47 9.63.1 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :250x10 mm Each 334.00 18% Included 0.00
48 9.66.1 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete 125 mm Each 316.00 18% Included 0.00
49 9.83 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete Each 1.00 18% Included 0.00
50 9.88 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. Nos 225.00 18% Included 0.00
51 9.101.2 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper Each 225.00 18% Included 0.00
52 9.139 Providing and fixing panic bar/latch (Double point) fitted with single body,Trim latch & lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer-in-charge,all complete. Nos 6.00 18% Included 0.00
53 9.142.1 35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineerin- charge.5 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished) Non decorative finish (matt finish) sqm 419.00 18% Included 0.00
54 9.147D.4 Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi- chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels). made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). sqm 191.99 18% Included 0.00
55 9.147F.4 Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Three track three panels sliding door with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) sqm 39.96 18% Included 0.00
56 9.161 Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation having density min 96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter. The frame shall be finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- charge . (Cost of SS ball bearing hinges is excluded). RM 42.00 18% Included 0.00
57 9.162 Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating with vision panel confirming to IS:3614 (Part II) or EN1634- 1:1999, tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mmthick G.I. sheet (zinc coating not less than 120gm/m²) duly filled mineral wool insulation having density min 96 kg/m³ and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-charge (panelling to be paid for seperately). sqm 18.78 18% Included 0.00
58 9.165 Providing and fixing bright/matt finished stainless steel handles of approved quality & make with necessary screws etc. all complete. 125 mm Each 207.00 18% Included 0.00
59 10.2. Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. kg 10000.00 18% Included 0.00
60 10.14.1.1 Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile B : Fixing with adjustable lugs with split end tail to each jamb metre 660.15 18% Included 0.00
61 10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer- Incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). KG 255.00 18% Included 0.00
62 11.19.3 Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : Dark shade pigment using ordinary cement sqm 800.00 18% Included 0.00
63 11.23.3 Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Agaria White sqm 213.04 18% Included 0.00
64 11.26.1 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick sqm 377.20 18% Included 0.00
65 11.27 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. sqm 83.13 18% Included 0.00
66 11.37 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. Sqm 195.01 18% Included 0.00
67 11.41.2 Providing and laying Vitrified floor tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades , laid on20mm thick cement mortar 1:4 (1 cement :4 coarse sand),including grouting the joints with white cement and matching pigments etc.,complete. Size of Tile 600x600 mm Sqm 1973.00 18% Included 0.00
68 11.41A.3.1 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size : Size of Tile 600 x 600 mm Sqm 623.66 18% Included 0.00
69 11.46.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shade in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand),including grouting the joints with white cement & matching pigments etc.complete. Size of Tile 600x600 mm) Sqm 371.69 18% Included 0.00
70 11.56.1 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent sqm 24.00 18% Included 0.00
71 12.19.1 Providing and laying brick tiles over mumty roofs, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement, over 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat: With common burnt clay F.P.S. (non modular) brick tiles of class designation 10 sqm 2443.38 18% Included 0.00
72 12.21.1 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase metre 1417.84 18% Included 0.00
73 12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. each 26.70 18% Included 0.00
74 12.41.2 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes: 110mm diameter metre 310.00 18% Included 0.00
75 12.42.2.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion: Single pushfit Coupler: 110mm each 26.70 18% Included 0.00
76 12.42.3.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion: Single tee with door: 110x110x110mm each 26.70 18% Included 0.00
77 12.42.4.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion: Single tee without door: 110x110x110mm each 26.70 18% Included 0.00
78 12.42.5.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion: Bend 87.5°: 110mm bend each 26.70 18% Included 0.00
79 12.42.6.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: Shoe (Plain): 110 mm Shoe Nos 26.70 18% Included 0.00
80 12.43.2 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1: 4 (1 cement: 4 coarse sand) and making good the wall etc complete: 110mm each 125.00 18% Included 0.00
81 12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15cm diameter and weighing not less than 440 grams. each 26.70 18% Included 0.00
82 12.48 Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately). sqm 85.00 18% Included 0.00
83 13.1.2 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) sqm 5574.93 18% Included 0.00
84 13.7.2 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand) sqm 2800.00 18% Included 0.00
85 13.12 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement: 3 coarse sand) finished rough with sponge. sqm 3762.55 18% Included 0.00
86 13.16.1 6 mm cement plaster on ceiling of mix : 1:3 (1 cement : 3 fine sand) sqm 4133.04 18% Included 0.00
87 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete for interiors walls sqm 8502.48 18% Included 0.00
88 13.47.1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) sqm 3762.55 18% Included 0.00
89 13.48.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm sqm 8502.48 18% Included 0.00
90 13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work sqm 1100.00 18% Included 0.00
91 13.8 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete for exterior wall. sqm 3762.55 18% Included 0.00
92 16.1 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth,dressing to camber and consolidations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. sqm 2887.50 18% Included 0.00
93 16.2. Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density). cum 7443.75 18% Included 0.00
94 16.3.1 Supplying and stacking at site : 90 mm to 45 mm size stone aggregate cum 359.49 18% Included 0.00
95 16.3.2 Supplying and stacking at site: 63 mm to 45 mm size stone aggregate cum 359.49 18% Included 0.00
96 16.3.3 Supplying and stacking at site: 53 mm to 22.4 mm size stone aggregate cum 359.49 18% Included 0.00
97 16.3.6 Supplying and stacking at site: Stone screening 13.2 mm nominal size (Type A) cum 167.16 18% Included 0.00
98 16.3.7 Supplying and stacking at site: Stone screening 11.2 mm nominal size (Type B) cum 75.49 18% Included 0.00
99 16.3.9 Supplying and stacking at site: Good earth cum 97.06 18% Included 0.00
100 16.4. Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density . cum 866.25 18% Included 0.00
101 16.69 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line,level and urvature,jointed with cement mortar 1:3 (1 cement:3 coarse and),including making joints with or without grooves (thickness of joints except at sharp curve shall not more than 5mm),including making drainage opening wherever required complete etc. cum 44.66 18% Included 0.00
102 16.75 Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge. (The panel shuttering work shall be paid for separately). (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately). cum 288.75 18% Included 0.00
103 16.91.1 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. sqm 600.00 18% Included 0.00
104 WATER SUPPLY , SANITARY FITTINGS AND DRAINAGE
105 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Nos 1.00 18% Included 0.00
106 17.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C pan) with seat and lid, 10 litre low level white PVC flushing cistern, including flush pipe, with manually control device ( handle lever), confirming to IS:7231, with all fittings and fixtures complete,including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. Nos 50.00 18% Included 0.00
107 17.7.2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap Nos 1.00 18% Included 0.00
108 17.8. Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings each 1.00 18% Included 0.00
109 17.10.1.2 Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls: Kitchen sink with drain board: 510 x 1040mm bowl depth 225 mm Nos 22.00 18% Included 0.00
110 17.28.2.2 Providing & fixing PVC waste pipe for sink or wash basin including PVC waste fitting Complete : Flexible Pipe 40mm dia each 23.00 18% Included 0.00
111 17.22A Providing and fixing CP brass 32mm size bottle trap of approved quality & make and as per the direction of Engineer-in-charge. Each 50.00 18% Included 0.00
112 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Each 51.00 18% Included 0.00
113 17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc.,Complete. Each 51.00 18% Included 0.00
114 17.34.1 Providing and fixing toilet paper holder : C.P. brass Nos 1.00 18% Included 0.00
115 17.71 Providing & Fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same material with snap fittings of approved quality and colour, weighing not less than 105 gms each 50.00 18% Included 0.00
116 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. each 22.00 18% Included 0.00
117 17.73.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. Each 51.00 18% Included 0.00
118 18.7.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.:Internal work - Exposed on wall: 15 mm nominal outer dia .Pipes. metre 60.00 18% Included 0.00
119 18.7.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.:Internal work - Exposed on wall: 20 mm nominal outer dia .Pipes. metre 165.00 18% Included 0.00
120 18.7.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.:Internal work - Exposed on wall:25 mm nominal outer dia .Pipes. metre 100.00 18% Included 0.00
121 18.7.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.:Internal work - Exposed on wall: 32 mm nominal outer dia .Pipes. metre 200.00 18% Included 0.00
122 18.8.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.: Concealed work including cutting chases and making good the walls etc.: 15 mm nominal outer dia .Pipes. metre 375.00 18% Included 0.00
123 18.8.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.: Concealed work including cutting chases and making good the walls etc.: 20 mm nominal outer dia .Pipes. metre 80.00 18% Included 0.00
124 18.8.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.: Concealed work including cutting chases and making good the walls etc.: 25 mm nominal outer dia .Pipes. metre 110.00 18% Included 0.00
125 18.8.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.: Concealed work including cutting chases and making good the walls etc.: 32 mm nominal outer dia .Pipes. metre 20.00 18% Included 0.00
126 18.9.6 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings.This includes jointing of pipes and fittings with one step CPVC solvent cement , trenching, refilling & testing of joints complete as per direction of Engineer in Charge: 50 mm nominal dia Pipes Metre 1250.00 18% Included 0.00
127 18.9.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings.This includes jointing of pipes and fittings with one step CPVC solvent cement , trenching, refilling & testing of joints complete as per direction of Engineer in Charge: 80 mm nominal dia Pipes Metre 50.00 18% Included 0.00
128 18.14 Fixing water meter and stop cock including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately) Each 1.00 18% Included 0.00
129 18.17.1 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore. Each 27.00 18% Included 0.00
130 18.17.1A Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore. Each 27.00 18% Included 0.00
131 18.17.2 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore. Each 27.00 18% Included 0.00
132 18.17.3 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore Each 2.00 18% Included 0.00
133 18.17.4 Providing and fixing gun metal gate valve with C.I.wheel of approved quality( Screwed ended): 50 mm nominal bore Each 2.00 18% Included 0.00
134 18.17.6 Providing and fixing gun metal gate valve with C.I.wheel of approved quality( Screwed ended): 80 mm nominal bore Each 1.00 18% Included 0.00
135 18.18.1 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete: 15 mm nominal bore Each 51.00 18% Included 0.00
136 18.18.3 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete: 25 mm nominal bore Each 11.00 18% Included 0.00
137 18.22.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter Each 51.00 18% Included 0.00
138 18.31.1.2 Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :100 mm diameter: Class II Each 4.00 18% Included 0.00
139 18.32.1 Constructing masonry Chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design : With F.P.S. bricks Each 12.00 18% Included 0.00
140 18.33.1 Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 each 4.00 18% Included 0.00
141 18.37.1 Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 each 1.00 18% Included 0.00
142 18.48A Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank:Circular tank/ Rectangular tank Litre 7500.00 18% Included 0.00
143 18.49.1 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore each 51.00 18% Included 0.00
144 18.51.1 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS Standards and weighing not less thn 690gms: 15 mm nominal bore Each 51.00 18% Included 0.00
145 18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore: 15mm nominal bore Each 394.00 18% Included 0.00
146 18.59.2 Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) : 80 mm dia Each 1.00 18% Included 0.00
147 18.60.1 Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately): 80 mm dia nominal bore Each 1.00 18% Included 0.00
148 18.65 Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height 75 mm with concealed fitting arrangements,weighting not less than 106 gms Each 51.00 18% Included 0.00
149 18.80.2 Disinfecting C.I. water mains by flushing with water containing bleaching powder @ 0.5 gms per litre of water and cleaning the same with fresh water, operation to be repeated three times including getting the sample of water from the disinfected main tested in the municipal laboratory: 100 mm diameter C.I. pipe 100 Metre 1.00 18% Included 0.00
150 19.1.2 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter Metre 310.00 18% Included 0.00
151 19.1.3 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 200 mm diameter Metre 130.00 18% Included 0.00
152 19.1.4 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 250 mm diameter Metre 135.00 18% Included 0.00
153 19.2.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: 150 mm diameter S.W. pipe Metre 310.00 18% Included 0.00
154 19.2.3 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: 200 mm diameter S.W. pipe Metre 130.00 18% Included 0.00
155 19.2.4 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: 250 mm diameter S.W. pipe Metre 135.00 18% Included 0.00
156 19.3.2 Providing and laying cement concrete 1:5:10 (1 cement :5 coarse sand: 10 graded stone aggregate 40 mm nominal size) upto haunches of S.W/ RCC. pipes including bed concrete as per standard design : 150 mm diameter R.C.C. pipe Metre 270.00 18% Included 0.00
157 19.3.4 Providing and laying cement concrete 1:5:10 (1 cement :5 coarse sand: 10 graded stone aggregate 40 mm nominal size) upto haunches of S.W/ RCC. pipes including bed concrete as per standard design : 250 mm diameter R.C.C.. pipe Metre 135.00 18% Included 0.00
158 19.3.5 Providing and laying cement concrete 1:5:10 (1 cement :5 coarse sand: 10 graded stone aggregate 40 mm nominal size) upto haunches of S.W/ RCC. pipes including bed concrete as per standard design : 300 mm diameterR.C.C. pipe Metre 300.00 18% Included 0.00
159 19.4.1.1 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 100x100 mm size P type: With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Each 30.00 18% Included 0.00
160 19.6.2 Providing and laying non Pressure NP2 class (Light Duty) RCC Pipe including collar jointed with stiff mixture of cement mortar 1:2 including testing of joints complete : 150 mm dia RCC Pipe metre 270.00 18% Included 0.00
161 19.6.3 Providing and laying non Pressure NP2 class (Light Duty) RCC Pipe including collar jointed with stiff mixture of cement mortar 1:2 including testing of joints complete : 250 mm dia RCC Pipe metre 135.00 18% Included 0.00
162 19.6.4 Providing and laying non pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement :2 fine sand) including testing of joints etc. complete : 300 mm dia R.C.C. pipe Metre 300.00 18% Included 0.00
163 19.7.1.1 Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Each 20.00 18% Included 0.00
164 19.8.1.1 Extra for depth for manholes: Size 90x80 cm: With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Each 2.00 18% Included 0.00
165 19.16 Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS: 10910 on 12 mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring protections on tail lenght on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specification & having manufacture's permanent identification mark to be visible even after fixing, including fixing in manhole with 30x20x15 cm cement concrete block 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. Each 300.00 18% Included 0.00
166 19.21.1 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete: For pipes 100 to 250 mm diameter Each 4.00 18% Included 0.00
167 19.21.2 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete: For pipes 250 to 300 mm diameter Each 4.00 18% Included 0.00
168 19.27.1 Constructing brick masonary road gully chamber 50x45x60 cm with bricks of class designation 75 in cement morter 1:4 (1 cement : 4 coarse sand) including 500x450 mm precast RCC horizontal grating complete as per standard design: With common burnt clay F.P.S(non modular) bricks of class designation 7.5 Each 45.00 18% Included 0.00
169 19.32.1 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1.00 18% Included 0.00
170 19.35.1 Providing and laying Non Pressure NP-3 class (Medium duty) RCC pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement :2 fine sand) including testing of joints etc. complete 450 mm dia RCC pipes. Metre 30.00 18% Included 0.00
171 19.35.2 Providing and laying Non Pressure NP-3 class (Medium duty) RCC pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement :2 fine sand) including testing of joints etc. complete 600 mm dia RCC pipes. Metre 130.00 18% Included 0.00
172 21.1.1.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately): For Fixed portion: Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 210.00 18% Included 0.00
173 21.1.2.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately): For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately): Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 210.00 18% Included 0.00
174 21.2.1 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin-charge.: Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side sqm 60.00 18% Included 0.00
175 21.3.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) sqm 232.95 18% Included 0.00
176 22.4.1 Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete : Serrated with central bulb (225 mm wide, 8-11 mm thick) metre 16.82 18% Included 0.00
177 22.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatmentand sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry sqm 448.22 18% Included 0.00
178 22.6 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured. sqm 2443.38 18% Included 0.00
180 SUB TOTAL OF DSR ITEMS (EXCL. GST) 0.00 0.00
181 Non-Schedule Items
182 MR Providing and fixing Glass Reinforced Concrete (G.R.C) Panels In approved size, pattern, design, thickness, and color of M/S JK BRIGHT make or equivalent. The Panels should be made from 53 grade White Portland Cement manufactured by JK CEMENT or equivalent, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by NEG or equivalent, Super Plasticizers manufactured by BASF or equivalent, Polymers manufactured by BASF or equivalent and U.V. resistant Synthetic inorganic pigments should be used for pigmentation manufactured by BAYFERROX (Germany) or equivalent. The material casting should take place In Synthetic Rubber I FRP Mold manufactured by Reckli or equivalent. The fixing of Screens should be Dry fixing i.e.to be done with Stainless Steel (SS-304) L shaped brackets, fasteners, and pins. sqm 30.00 18% Included 0.00
183 MR Providing & Fixing Terracota Jali sqm 16.00 18% Included 0.00
184 MR Providing and fixing in position about 50mm thick border and 35mm thick design Jali at all levels made from Glass fibre reinforced concrete (GRC) using white cement, Quartz Sand, AR Fibres, Water Plasticizers & pigments in approved shape, size and length as per the design and drawings and as per specifications, mix design and test results given below. The typical Screen should be of sizes as per the drawings. Fixing of GRC Jali shall be with help of S.S. Screws Fixtures, M.S Angle Cleats, Fissure Plug, and Dowel Pin proper alignment as per drawings (Shop drawings to be Submitted by the contractor before the work start). As per approved paint, shade & Finishing with GRC powder & filling the joints with Epoxy sealant neatly between GRC screen and primary structures. The Screen should be in absolute straight plumb line and length and joins between channels should be neatly filed to make seamless uniform surface across the entire elevation of the building without any visibility to joints. Any framework to be paid extra as per item.(GRC Screen) sqm 155.18 18% Included 0.00
185 MR Supply and fixing of 304 grade stainless steel ball bearing hinges of size 125 x 89 x 3mm from Ingersoll Rand / Assa Abloy/Dorma / Marshall Nos 207.00 18% Included 0.00
186 NS Providing and fixing CP Health faucet Jaquar Cat. No. ALD-573 or eqivalent(make to be approved) with flexible pipe and wall hook with european Water Closet, complete in all respect. (Base cost= Rs. 1625.00 / unit-Including taxes) Each 51.00 18% Included 0.00
187 NS Providing and fixing of CP Bath Hand shower of Jaquar make (HSH-1727) or equivalent (make to be approved) of 105mm dia with flexible shower tube of 1.5m length of Jaquar make or equivalent (Cat no. SHA-549D8) pipe and wall hook of Jaquar make or equivalent (cat no. SHA-555), complete in all respect. (Base cost including shower, tube & wall bracket= Rs. 5100.00 / unit- Including Taxes) Each 4.00 18% Included 0.00
188 NS Providing and fixing of CP Wall Mixer of Jaquar make(Continental series) of Cat no. CON-273KNUPR or equivalent (make to be approved) including all accessories complete in all respect. (Base cost = Rs. 5350.00 / unit- Including Taxes) Each 46.00 18% Included 0.00
189 Providing and fixing of CP Wall Mixer of Jaquar make(Continental series) of Cat no. CON-281KN or equivalent (make to be approved) including all accessories complete in all respect. (Base cost = Rs. 6100 / unit- Including Taxes) Each 4.00 18% Included 0.00
190 NS Providing and fixing of under counter wash basin of Jaquar make(Continental series) of Cat no. CNS-WHT-705 or equivalent alongwith 32mm waste coupling of Jaquar make (ALD-705/709) or equivalent (make to be approved) including all accessories complete in all respect. (Base cost washbasin = Rs. 3000/ unit- and waste coupling = Rs. 550/unit Including Taxes) Nos 50.00 18% Included 0.00
190 NS Providing and fixing of CP Wash basin Mixer of Jaquar make(Continental series) of Cat no. CON-167KNB or equivalent (make to be approved) including all accessories complete in all respect. (Base cost = Rs. 4000 / unit- Including Taxes) Each 50.00 18% Included 0.00
191 NS Providing and fixing of CP Sink Mixer of Jaquar make(Continental series) of Cat no. CON-309KNM or equivalent (make to be approved) including all accessories complete in all respect. (Base cost = Rs. 3850 / unit- Including Taxes) Each 22.00 18% Included 0.00
192 NS Provising and fixing 100mm dia weight not less than 100gms stainless steel jali (grating) with or without hole for waste pipe for floor or nahani trap Each 124.00 18% Included 0.00
193 NS Providing and fixing soil, waste and vent pipes : 110 mm dia: uPVC pipe as per ISI 14735 metre 280.00 18% Included 0.00
194 NS Providing and fixing soil, waste and vent pipes : 75 mm dia: uPVC pipe as per ISI 14735 metre 130.00 18% Included 0.00
195 NS Providing and fixing pipe clips of approved design to uPVC pipe embeded in and including cement concrete blocks 10x10x10 cm of 1:2:4 (1 cement : 2coarse sand: 4 graded stone aggregate 20mm nominal size) incl. cost of cutting holes and making good walls etc. -110mm Each 135.00 18% Included 0.00
196 NS Providing and fixing pipe clips of approved design to uPVC pipe embeded in and including cement concrete blocks 10x10x10 cm of 1:2:4 (1 cement : 2coarse sand: 4 graded stone aggregate 20mm nominal size) incl. cost of cutting holes and making good walls etc. -75mm Each 55.00 18% Included 0.00
197 NS Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete -110mm uPVC pipe as per ISI 14735 Each 240.00 18% Included 0.00
198 NS Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete -75mm uPVC pipe as per ISI 14736 Each 69.00 18% Included 0.00
199 NS Providing and fixing heel rest sanitary bend: 110mm uPVC pipe as per ISI 14735 Each 28.00 18% Included 0.00
200 NS Providing and fixing heel rest sanitary bend: 75mm uPVC pipe as per ISI 14735 Each 11.00 18% Included 0.00
201 NS Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete: 110x110x110 mm Each 50.00 18% Included 0.00
202 NS Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete: 75x75x75 mm Each 23.00 18% Included 0.00
203 NS Providing and fixing terminal guard:110mm uPVC pipe as per ISI 14735 Each 28.00 18% Included 0.00
204 NS Providing and fixing terminal guard:75mm uPVC pipe as per ISI 14736 Each 11.00 18% Included 0.00
205 NS Providing and fixing collar:110mm uPVC pipe as per ISI 14735 Each 175.00 18% Included 0.00
206 NS Providing and fixing collar:75mm : uPVC pipe as per ISI 14736 Each 85.00 18% Included 0.00
207 NS Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: 110 mm inlet and 75mm outlet: uPVC pipe as per ISI 14736 Each 23.00 18% Included 0.00
208 NS Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: 100 mm inlet and 110 mm outlet: uPVC pipe as per ISI 14737 Each 100.00 18% Included 0.00
209 NS Filling with good quality cinder, as and where directed by the Engineer Incharge, in sunk in layers of 15cm thickness, including watering ramming well etc. complete as directed cum 170.00 18% Included 0.00
SUB-TOTAL (Non-scheduled Item) 0.00 0.00
SUB-TOTAL (CIVIL) (Scheduled + Non scheduled items) 0.00 0.00
II ELECTRICAL ITEMS (SUB- STATION WORK)
1 NON DSR 11/.433kV, 315KVA Dry Type COMPACT SUB STATIONS as per Technical Specification Set 1 18% Included 0.00
2 NON DSR MAIN L.T. PANEL as per Technical Specification Set 1 18% Included 0.00
3 NON DSR CAPACITOR BANK PANEL (100 KVAR - 1SET) (PART OF MAIN L.T. PANEL) Set 1 18% Included 0.00
4 NON DSR Diesel Generating Set
4.1 NON DSR Supply, testing and Commissioning of Silent type Diesel Generating Set of 160KVA, as per technical specification Set 1 18% Included 0.00
4.2 NON DSR AMF Panel for 160KVA DG Set as per Technical Specification Set 1 18% Included 0.00
4.3 NON DSR Supply, Fixing, testing and Commissioning of Exhaust gas piping system as per Technical specification Meter 20 18% Included 0.00
4.4 NON DSR Supply & fixing of SS Bellow as per technical specification Set 1 18% Included 0.00
4.5 NON DSR Supply & fabrication of GG exhaust pipe supports as per Technical Support. Kg 1200 18% Included 0.00
5 DISTRIBUTION PANEL
5.1 NON DSR METER BOAR PANEL-as per technical specification Set 1 18% Included 0.00
5.2 NON DSR METER BOAR PANEL-02 &03 (HOUSING BLOCK) as per technical specification Set 2 18% Included 0.00
5.3 NON DSR COMMON AREA PANEL (HOUSING BLOCK) as per technical specification Set 1 18% Included 0.00
5.4 NON DSR ELECTRICAL PANEL (FOR BUNGLOW) as per technical specification Set 1 18% Included 0.00
5.6 NON DSR EXTERNAL LIGHTING PANEL (OUTDOOR TYPE) as per technical specification Set 1 18% Included 0.00
6 11 KV END TERMINATION:
6.1 10.4 supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :
6.2 10.4.3 3C x 240 Sqmm, 11KV XLPE Set 2 18% Included 0.00
7 11 KV H.T. CABLE:
NON DSR Supplying of 11 KV grade aluminium conductor, cross linked polyethylene (XLPE) insulated individual core screened, flat steel/strip armoured PVC sheathed cable complete as required.
7.1 NON DSR 3C x 240 Sqmm, 11 KV XLPE Meter 60 18% Included 0.00
8 8.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
8.1 8.1.2 Above 120 sq. mm and upto 400 sq. mm Meter 60 18% Included 0.00
9 Supply of following sizes of 1.1KV grade Copper conductor XLPE insulated and FRLS PVC sheathed armoured control cable including termination conforming to relevant IS. (Cable shall be purchased only after approval of cable schedule by architect / consultant).
9.1 NON DSR 4 core, 2.5 sq.mm. Meter 80 18% Included 0.00
9.2 NON DSR 10 core, 2.5 sq.mm. Meter 50 18% Included 0.00
9.3 NON DSR 12 core, 2.5 sq.mm. Meter 50 18% Included 0.00
10 SAFETY EQUIPMENT
10.1 NON DSR Supplying & Placing of First aid box as approved by St.John Ambulance Brigade /Indian Red Cross society conforming to IS : 2217 - 1963 etc as reqd. Each 2 18% Included 0.00
10.2 NON DSR Supplying & Installation of Shock treatment chart duly mounted on a wooden frame with glass on, as required in 2 languages (Hindi & English) etc. as reqd Each 2 18% Included 0.00
10.3 NON DSR Supplying and Laying of Rubber mat 1000 mm. Wide to withstand 1.1 KV dielectric strength as per latest IS 15652-2006 etc. as reqd. Meter 24 18% Included 0.00
10.4 NON DSR Supplying and Laying of Rubber mat 1000 mm. Wide to withstand 11 KV dielectric strength as per latest IS 15652-2006 etc. as reqd. Meter 3 18% Included 0.00
S.H.-II INTERNAL ELECTRICAL WORK
1 1.1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
1.1 1.10.3 Group C Point 1100 18% Included 0.00
2 1.55 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
2.1 1.55.3 Group C Point 187 18% Included 0.00
3 1.11 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Point 42 18% Included 0.00
4 1.12 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. Meter 9700 18% Included 0.00
5 1.13 Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. Meter 2500 18% Included 0.00
6 1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
1.14 CIRCUIT / SUBMAIN WIRING
6.1 1.14.1 2x1.5 sq mm + 1x1.5 sq mm earth wire Meter 1500 18% Included 0.00
6.2 1.14.2 2x2.5 sq mm + 1x2.5 sq mm earth wire Meter 3300 18% Included 0.00
6.3 1.14.7 4x2.5 sq mm + 2x2.5 sq mm earth wire Meter 1600 18% Included 0.00
6.4 1.14.4 2x6 sq mm + 1x6 sq mm earth wire. Meter 30 18% Included 0.00
6.5 1.14.5 2x10 sq. mm + 1x6 sq. mm earth wire Meter 80 18% Included 0.00
6.6 1.14.6 2x16 sq. mm + 1x6 sq. mm earth wire Meter 20 18% Included 0.00
6.7 1.14.9 4x6 sq mm + 2x6 sq mm earth wire Meter 20 18% Included 0.00
6.8 1.14.10 4x10 sq mm + 2x6 sq mm earth wire Meter 320 18% Included 0.00
6.9 1.14.11 4x16 sq mm + 2x6 sq mm earth wire Meter 510 18% Included 0.00
7 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. Each 406 18% Included 0.00
8 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. Each 244 18% Included 0.00
9 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
9.1 1.24.6 Telephone socket outlet Each 121 18% Included 0.00
9.2 1.24.7 TV anteena Socket Outlet Each 116 18% Included 0.00
9.3 1.24.8 Bell push Each 21 18% Included 0.00
10 1.27 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.
10.1 1.27.1 1 or 2 Module (75mmX75mm) - For TV outlet Each 269 18% Included 0.00
10.2 1.27.2 3 Module (100mmX75mm) - For Socket outlet. Each 20 18% Included 0.00
10.3 1.27.3 6 Module (200mmX75mm) - For Socket outlet. Each 7 18% Included 0.00
10.4 1.27.5 8 Module (125 mmX125 mm) Each 7 18% Included 0.00
11 2.3 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
11.1 2.3.3 12 Way, Double Door Each 10 18% Included 0.00
12 2.4 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).
12.1 2.4.2 6 Way (4+18), Double Door Each 3 18% Included 0.00
12.2 2.4.3 8 Way (4+24), Double Door Each 33 18% Included 0.00
13 2.5 Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
13.1 2.5.3 12 way (4 + 36), Double door Each 1 18% Included 0.00
14 2.1 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C series Miniature Circuit Breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc,as required.
14.1 2.10.1 Single pole Each 524 18% Included 0.00
14.2 2.10.5 Triple pole and neutral Each 1 18% Included 0.00
15 NON DSR Supplying and fixing following rating, double pole, 240 volts, MCB complete with connections, testing and commissioning etc. as required.
15.1 NON DSR 40 Amp Each 10 18% Included 0.00
16 NON DSR Supplying and fixing following rating, four pole, 415 volts, MCB complete with connections, testing and commissioning etc. as required.
16.1 NON DSR 40 Amp Each 17 18% Included 0.00
16.2 NON DSR 63 Amp Each 19 18% Included 0.00
17 2.14 Supplying and fixing of following rating double pole (Single phase and neutral) 240 volts, residual current circuit breaker (RCCB), having a current sensivity current 30 miliampere in the existing MCB DB complete with connections, testing & commissioning etc. as required.
17.1 2.14.1 25 Amp Each 3 18% Included 0.00
17.2 2.14.2 40 Amp Each 48 18% Included 0.00
17.3 2.14.3 63 Amp Each 43 18% Included 0.00
18 1.18 Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
18.1 1.18.3 4 Pair Meter 2660 18% Included 0.00
19 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. Meter 1607 18% Included 0.00
20 1.2 Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.
20.1 1.20.2 25 mm dia Meter 134 18% Included 0.00
21 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
21.1 1.21.1 20 mm dia Meter 80 18% Included 0.00
21.2 1.21.2 25 mm dia Meter 1500 18% Included 0.00
21.3 1.21.3 32 mm dia Meter 60 18% Included 0.00
22 1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. Each 87 18% Included 0.00
23 NON DSR Supply, erection, testing and commissioning of following sizes of splitter of aluminium die cast body in suitable size of G.I. Box.
23.1 NON DSR 6 way Each 22 18% Included 0.00
24 NON DSR Supplying and drawing in existing conduits / cable tray / raceway and testing & commissioning of following multicore PVC insulated PVC sheathed annealed tinned copper conductor 0.5 mm dia telephone wires conforming to ITD-S/SW-113B including terminal joints complete as required.
24.1 NON DSR 5 Pair Armoured Telephone Cable Meter 67 18% Included 0.00
24.2 NON DSR 10 Pair Unarmoured Telephone Cable Meter 107 18% Included 0.00
24.3 NON DSR 100 Pair Unarmoured Telephone Cable Meter 34 18% Included 0.00
25 NON DSR Supply and installation of telephone tag block of IDC type of following sizes in sheet metal enclosure of suitable dimensions fabricated out of 16 SWG sheet steel with castle key lock, hinged type cover including termination of telephone cables, making connections, painting of box etc, complete as required.
25.1 NON DSR 10 Pair Each 11 18% Included 0.00
25.2 NON DSR 20 Pair Each 1 18% Included 0.00
25.3 NON DSR 200 Pair Each 1 18% Included 0.00
26 NON DSR Supplying Installation, Testing and Commissioning of Server Based EPABX Fully Computerized System, Multi slot 19: U Rack Mountable 2U Rack Presently Configuration as Below: CO Line - 01 Nos. PRI(30 Channel)- 01 Nos. Extension - 01 Nos. Digital Extension Circuits- 01 Nos. Analog Extension - 125 Nos (Approved Make-Matrix/Alcatel) Each 1 18% Included 0.00
27 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. Each 130 18% Included 0.00
28 1.44 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5sq. mm FRLS PVC insulated, copper conductor, single corecable etc. as required. Each 130 18% Included 0.00
29 1.5 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
29.1 1.50.1 Upto 450 mm sweep Each 78 18% Included 0.00
30 1.41 Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting/ LED fittings of all types, complete with all accessories and tube/lamp/ LED etc. directly on ceiling/ wall/ false ceiling with GI Chain included for fixing wherever required, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. Each 618 18% Included 0.00
31 1.57 Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet (near equipment point) and 25 A modular SP MCB, “C” curve (at accessible point) including connections, painting etc. as required. Each 82 18% Included 0.00
32 1.56 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). (For UPS Supply) Each 12 18% Included 0.00
33 NON DSR Supply of following sizes of 1.1KV grade aluminium conductor XLPE insulated and FRLS PVC sheathed armoured cable conforming to relevant IS. (Cable shall be purchased only after approval of cable schedule by architect / consultant).
33.1 NON DSR 3½ core, 185 sq.mm. Meter 300 18% Included 0.00
33.2 NON DSR 3½ core, 120 sq.mm. Meter 100 18% Included 0.00
33.3 NON DSR 3½ core, 95 sq.mm. Meter 495 18% Included 0.00
33.4 NON DSR 3½ core, 70 sq.mm. Meter 745 18% Included 0.00
33.5 NON DSR 3½ core, 35 sq.mm Meter 355 18% Included 0.00
33.6 NON DSR 4 core, 16 sq.mm cu ar cable Meter 320 18% Included 0.00
33.7 NON DSR 4 core, 10 sq.mm cu ar cable Meter 110 18% Included 0.00
33.8 NON DSR 4 core, 6 sq.mm cu ar cable Meter 10 18% Included 0.00
33.9 NON DSR 2 core, 16 sq.mm cu ar cable Meter 375 18% Included 0.00
33.1 NON DSR 2 core, 6 sq.mm cu ar cable Meter 1300 18% Included 0.00
34 7.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required
34.1 7.1.1 Upto 35 sq. mm Meter 1200 18% Included 0.00
34.2 7.1.2 Above 35 sq. mm and upto 95 sq. mm Meter 200 18% Included 0.00
34.3 7.1.3 Above 95 sq. mm and upto 185 sq. mm Meter 100 18% Included 0.00
35 7.5 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.
35.1 7.5.1 Upto 35 sq. mm Meter 315 18% Included 0.00
35.2 7.5.2 Above 35 sq. mm and upto 95 sq. mm Meter 1200 18% Included 0.00
35.3 7.5.3 Above 95 sq. mm and upto 185 sq. mm Meter 200 18% Included 0.00
36 7.8 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.
36.1 7.8.1 Upto 35 sq. mm (clamped with cable tie) Meter 500 18% Included 0.00
36.2 7.8.2 Above 35 sq. mm and upto 95 sq. mm (clamped with cable tie) Meter 5 18% Included 0.00
37 9.1 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
37.1 9.1.1 2 X 6 sq. mm (19mm) Set 20 18% Included 0.00
37.2 9.1.3 2 X 16 sq. mm (22mm) Set 10 18% Included 0.00
37.3 9.1.32 4 X 10 sq. mm (25mm) (The Termination including 4 x 6 sq. mm cable) Each 8 18% Included 0.00
37.4 9.1.33 4 X 16 sq. mm (28mm) Each 14 18% Included 0.00
37.5 9.1.21 3½ X 35 sq. mm (32mm) Each 8 18% Included 0.00
37.6 9.1.23 3½ X 70 sq. mm (38mm) Each 10 18% Included 0.00
37.7 9.1.24 3½ X 95 sq. mm (45mm) Each 6 18% Included 0.00
37.8 9.1.25 3½ X 120 sq. mm (45mm) Each 2 18% Included 0.00
37.9 9.1.27 3½ X 185 sq. mm (57mm) Each 10 18% Included 0.00
38 4.6 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
38.1 4.6.2 150 mm wide x 50 mm depth x 1.6 mm thickness. Meter 150 18% Included 0.00
38.2 4.6.4 300 mm wide x 50 mm depth x 1.6 mm thickness. Meter 20 18% Included 0.00
38.3 4.6.6 450 mm width X 50 mm depth X 2.0 mm thickness Meter 30 18% Included 0.00
39 4.7 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
39.1 4.7.2 150 mm wide x 50 mm depth x 1.6 mm thickness. Each 16 18% Included 0.00
39.2 4.7.4 300 mm wide x 50 mm depth x 1.6 mm thickness. Each 6 18% Included 0.00
39.3 4.7.6 450 mm width X 50 mm depth X 2.0 mm thickness Each 8 18% Included 0.00
40 4.8 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
40.1 4.8.2 150 mm wide x 50 mm depth x 1.6 mm thickness. Each 10 18% Included 0.00
40.2 4.8.4 300 mm wide x 50 mm depth x 1.6 mm thickness. Each 2 18% Included 0.00
40.3 4.8.6 450 mm width X 50 mm depth X 2.0 mm thickness Each 5 18% Included 0.00
41 4.9 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Cross member"(galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.
41.1 4.9.2 150 mm wide x 50 mm depth x 1.6 mm thickness. Each 10 18% Included 0.00
41.2 4.9.4 300 mm wide x 50 mm depth x 1.6 mm thickness. Each 4 18% Included 0.00
41.3 4.9.6 450 mm width X 50 mm depth X 2.0 mm thickness Each 6 18% Included 0.00
42 4.1 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “Reducer” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
42.1 4.10.2 150 mm wide x 50 mm depth x 1.6 mm thickness. Each 7 18% Included 0.00
42.2 4.10.4 300 mm wide x 50 mm depth x 1.6 mm thickness. Each 4 18% Included 0.00
42.3 4.10.7 600 mm wide x 50 mm depth x 2.0 mm thickness. Each 4 18% Included 0.00
43 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
43.1 14.16.3 120 mm dia (OD-120 mm & ID-103 mm nominal) Meter 220 18% Included 0.00
43.2 14.16.5 200 mm dia (OD-200 mm & ID-175 mm nominal) Meter 320 18% Included 0.00
44 INSPECTION CHAMBER:
44.1 (Civil DSR -2021) 19.3 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :
44.1.1 19.30.2 Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets.
44.1.1.1 19.30.2.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 36 18% Included 0.00
44.1.2 19.30.3 Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets 0 18% Included 0.00
44.1.2.1 19.30.3.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 24 18% Included 0.00
45 5.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. Each 38 18% Included 0.00
46 5.6 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. Each 4 18% Included 0.00
47 5.7 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. Meter 450 18% Included 0.00
48 5.14 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. Meter 10 18% Included 0.00
49 5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. Meter 610 18% Included 0.00
50 5.2 Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required. Meter 80 18% Included 0.00
51 Similar to DSR 5.2 (2xRs.206/) Providing and fixing earth bus of 50 mm X 5 mm GI strip on surface for connections etc. as required. Meter 160 18% Included 0.00
52 6.2 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. Each 16 18% Included 0.00
53 6.4 Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required. Each 16 18% Included 0.00
54 6.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run) Meter 700 18% Included 0.00
55 6.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run) Meter 380 18% Included 0.00
56 6.12 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required. Each 16 18% Included 0.00
57 6.14 Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required. Meter 160 18% Included 0.00
58 NON DSR Supply of Recess LED Downlighter made of pressure die cast alu. housing, LED Used shall be SMD type and fixture should have minimum efficacy at System level 110 lumens/watt with Minimum system Lumens 1500 with maximum system wattage of 13.5W Life of fixture (Including Driver) 50000 burning Hrs. @ L70B50 Lumen maintenance, CCT of 4000K / 5700K/6500K (SDCM<5), CRI >80, PF >0.95, Min working temp range - 0°C < Ta < 45°C, an operating Voltage Range of 130 - 320 VAC.Minimum Internal Surge Protection 2.5KV. (Make: Philips DN296B LED 12S -6500 PSU WH or similar equivalents). Nos. 18 18% Included 0.00
59 NON DSR Supply of LED indoor surface downlighter suitable for general lighting. Luminaire should have polycarbonate cover with diffused optics. The luminaire should have CRI > 80 and CCT of 4000K / 5700K/6500K. The luminaire shall be compliant with IP20 classification.The fixture should have a minimum system efficacy of 100 lumen/Watt and a minimum system lumen output of 1600 lumens and maximum system wattage of 15 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours @ design ambient temp 45 deg C. The electronic driver used shall have a power factor >0.95 , THD <10%. he fixture should comply with the parameters as per IS10322. (Make: Philips- SM251C LED16S-6500 PSU WH or similar equivalents) Nos. 250 18% Included 0.00
60 NON DSR Supply of linear batten IP20 rated with max. 20W LED and efficacy of minimum 110m/W; Al Housing and high transitivity PC diffuser for smooth and glare free light. Life span of minimum 50000@L70B50 burning hours; CCT of 4000K /5700K/6500K, power factor ≥ 0.95; CRI>80; SDCM<5; THD<10%; Driver efficiecny>85%; Input voltage range 140-270V; Inbuilt surge 3kV; can be mounted on wall as well as ceiling surface; fixture should have max. length of 4ft, Luminaire should be BIS certified. (Make: Philips BN170C LED20S-6500 PSU L120 or similar equivalents) Nos. 215 18% Included 0.00
61 NON DSR Supply of LED 2x2 luminaire with CRCA housing suitable with fully diffused diffuser for general lighting in office areas. The luminaire should have a color consistency SDCM < 5, CRI > 80 and CCT of both 4000K / 6500K. The luminaire shall be compliant with IP20 and IK02 classification. Luminaire shall be designed to emit at least 3600 nominal lumens and an outstanding backlit solution efficacy of atleast 120 lumen/watt and maximum system wattage of 31Watts.The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours @ design ambient temp 45 deg C. The electronic driver used shall have a power factor >0.95 and THD <10%. he fixture should comply with the parameters as per IS10322. (Make: Philips RC380B LED30S-6500 G6 L60W60 PSU OD or similar equivalents) Nos. 37 18% Included 0.00
62 NON DSR Supply of LED Bulk Head Light with a nominal system lumen output of 700 lumens and maximum system wattage of 6 Watts with a minimum system efficacy of >110 lm/W. The luminaire shall meet IP65 rating with THD<10% and PF > 0.9. The luminaire housing should made of die-cast aluminum with a Polycarbonate aluminum coated reflector. (Make: Philips WT140W LED7S CW PSU S1 PC or similar equivalents) Nos. 16 18% Included 0.00
63 NON DSR Supply of LED Mirror Light batten IP20 rated with max. 10W LED and efficacy of minimum 110m/W; Al Housing and high transitivity PC diffuser for smooth and glare free light. Life span of minimum 50000@L70B50 burning hours; CCT of 4000K /5700K/6500K, power factor ≥ 0.95; CRI>80; SDCM<5; THD<10%; Driver efficiecny>85%; Input voltage range 140-270V; Inbuilt surge 3kV; can be mounted on wall as well as ceiling surface; fixture should have max. length of 2ft. (Make: Philips BN021 LED12S 6500 PSU GR or similar equivalents) Nos. 50 18% Included 0.00
64 NON DSR Supply of Led Blush 1H Wall Braket Light Make:Philips -58185 or similar equivalents. Nos. 95 18% Included 0.00
65 NON DSR Supply of following sizes of heavy duty exhaust fan for single phase 230 volt, 50HZ AC supply complete with motor, blades, frame, bracket, louver/ shutter etc as required. (HavellS Make, Cat No - Ventil Air - DX White or equivalent).
65.1 NON DSR 250 mm Exhaust Fan (1500 RPM). Nos. 78 18% Included 0.00
66 NON DSR Supply of following sizes of ceiling fan complete with double ball bearing, motor, blades, downrod, canopy, capacitor etc. suitable for operation on 230 volt, 50 Hz, A.C. supply complete as required. (Havells Make, Cat No-Efficiencia Neo (BLDC 26 W) or equivalent.)
66.1 NON DSR 1200 mm Ceiling Fan Nos. 112 18% Included 0.00
66.2 NON DSR 900 mm Ceiling Fan ( Fusion Prime) Nos. 18 18% Included 0.00
67 NON DSR Supply, Installation, Testing & commissioning ofoutdoor based Bollard fixture for landscape lighting solution. The fixture should have aluminium extrusion housing with PC Cover. The fixture should give a minimum system lumen output of 340 lumens and maximum system wattage of 10 Watt. The fixture shall have a CRI of minimum 75 CCT of 4000K. The fixture shall be designed for a system life of 25,000 hours @L80B10. Ingress Protection of IP65 and Mechanical Impact Resistance Rating of IK >=10.The fixture driver should have an operating voltage range of 220-240 V, Ambient temperature range -20 to +40 °C PF >0.9 , and SDCM<5. the luminire should give two color temperature of 4000K. . (Make: Philips Cat No.-BCP151/LED150/NW DXH=180X800 or similar equivalents) Nos. 12 18% Included 0.00
68 NON DSR Supply, Installation, Testing & commissioning of LED based Street light, housing made up of Pressure Die Cast Housing LM 6 Alloy/ Anti Dust Exposed Lens,sturdiness and embossed brand name/logo name of manufacturer. The fixture should have a minimum system efficacy of 115 lumen/Watt and a minimum system lumen output of 5300 lumens and maximum system wattage of 45 Watts.The fixture shall have a CRI of minimum 70. The fixture shall be designed for a system life of 50,000 hours @70% lumen maintenance. Ingress Protection of IP66 (lamp and gear Compartment) and Mechanical Impact Resistance Rating of IK08.The fixture driver should have an operating voltage range of 140-270 V, inbuilt surge protection of >=4KV(additionally 10KV external also available), PF >0.95 , and SDCM<5. (Make: BRP056 or similar equivalents) Nos. 37 18% Included 0.00
69 NON DSR Supply, Installation, Testing & commissioning of 4.5m Hight MS Poles, PU painted, including base plate & 600mm arm length, polyurethane paint (Color as approved), single arm. Nos. 37 18% Included 0.00
70 NON DSR Supply, Receiving, Unloading, Shifting, Installation, Testing & commissioning of gate light 1 x 70 watt SON of (Make : Philips / Wipro / Havells / crompton) Nos. 4 18% Included 0.00
S.H.-III SOLAR PHOTO VOLTAIC POWER GENERATION SYSTEM
1 NON DSR Supplying installation testing and commissioning of Grid interactive roof top solar photo voltaic power generation system as per Technical Specification kwp 120 18% Included 0.00
S.H.-IV AUTOMATIC FIRE DETECTION GAS SUPPRESSION SYSTEM IN PANELS
1 Supply, fixing, testing and commissioning of Automatic Linear pneumatic Tube Detection based Novec 1230/ FK5-1-12 System for Electrical Panels (consisting of the following components.
1.1 NON DSR 2.0 KG Novec 1230/ FK5-1-12, DLP Assembly with automatic valve mounted on approved cylinder, push in connector for tube, Novec 1230/ FK 5-1-12 gas, mounting bracket, End of Line adopter and low pressure switch for monitoring system activation. No. 1 18% Included 0.00
1.2 NON DSR 6 KG Novec 1230/ FK5-1-12, DLP Assembly with automatic valve mounted on approved cylinder, push in connector for tube, Novec 1230/ FK5-1-12 gas, mounting bracket, End of Line adopter and low pressure switch for monitoring system activation. No. 1 18% Included 0.00
1.3 NON DSR Linear pneumatic heat Detection Tube with all necessary fittings & supports Meter 100 18% Included 0.00
1.4 NON DSR Master Control Unit with Audio Visual Alarm with wiring to make complete system operational. The Control Panel should have provision for integration with Fire Alarm/SCADA/BMS System (Supply to be provide by the end client at 220 Volt AC). No. 2 18% Included 0.00
II SUB-TOTAL (ELECTRICAL) 0.00 0.00
I Total CIVIL (excluding GST) 0.00 0.00
I.G GST on CIVIL 0.00 #DIV/0!
I.T. Total CIVIL (Incl. GST) 0.00
II Total ELECTRICAL (excluding GST) 0.00 0.00
II.G GST on ELECTRICAL 0.00
II.T Total Services (Incl. GST) 0.00
GT Total CIVIL + ELECTRICAL (excluding GST) 0.00
GT.G Total GST on CIVIL + ELECTRICAL 0.00
GT.T Total CIVIL + ELECTRICAL (including GST) 0.00
Date: 27-Jun-2023
Place: Printed Name : 0
Designation : 0
Construction of residential quarters at Bikaner (Rajasthan)
NR1/NT/W-CIVIL/DOM/I00/23/02605 dated 11.05.2023 (Rfx: 5002002740)
Bidder’s Name and Address To:
Name : Contracts & Material
Address : Power Grid Corporation of India Ltd.,
SCO-5-10, Beside PCB Building,
Sector 16A, Faridabad, Haryana- 121002
(Adjacent to Metro Hospital)
S.No. Description Amount (in INR) Remark
GT Total CIVIL + ELECTRICAL (excluding GST) 0.00 To be filled on portal
GT.G Total GST on CIVIL + ELECTRICAL 0.00 To be filled on portal
GT.T Total CIVIL + ELECTRICAL (including GST) 0.00 To be filled on portal
Construction of residential quarters at Bikaner (Rajasthan)
NR1/NT/W-CIVIL/DOM/I00/23/02605 dated 11.05.2023 (Rfx: 5002002740) Bid Form 2nd Envelope (Price Bid) Sole Bidder 1 st 1 January
0 2 nd 2 February
BID FORM (Second Envelope) 3 rd 3 March
Bid Proposal Ref. No. 5 th 5 May
Date : 27-Jun-2023 6 th 27 6 June
To: 8 th June 8 August
Contracts & Material 9 th 2023 9 September
Power Grid Corporation of India Ltd., 10 th 10 October
SCO-5-10, Beside PCB Building, 11 th 11 November
Sector 16A, Faridabad, Haryana- 121002 12 th 12 December
(Adjacent to Metro Hospital) 13 th
Name of Contract : Construction of residential quarters at Bikaner (Rajasthan) 15 th
Dear Ladies and/or Gentlemen, 16 th
1.0 In continuation of First Envelope of our Bid, we hereby submit the Second Envelope of the Bid, both of which shall be read together and in conjunction with each other, and shall be construed as an integral part of our Bid. Accordingly, we the undersigned, submitting offer as per provision of Technical Specification under the above-named package in full conformity with the said Bidding Documents for the sum of Rs. 117509885.643 (Rs. Eleven Crore Seventy Five Lac Nine Thousand Eight Hundred Eighty Six Only) Plus applicable Other Taxes & Duties or such other sums as may be determined in accordance with the terms and conditions of the Bidding Documents. In continuation of First Envelope of our Bid, we hereby submit the Second Envelope of the Bid, both of which shall be read together and in conjunction with each other, and shall be construed as an integral part of our Bid. Accordingly, we the undersigned, submitting offer as per provision of Technical Specification under the above-named package in full conformity with the said Bidding Documents for the sum of Rs. Plus applicable Other Taxes & Duties or such other sums as may be determined in accordance with the terms and conditions of the Bidding Documents. 117,509,885.64 (Rs. Eleven Crore Seventy Five Lac Nine Thousand Eight Hundred Eighty Six Only) 17 th
Schedule-1 Consultancy Charges
2.5 We declare that items left blank in the Schedules will be deemed to have been included in other items. The TOTAL for each Schedule and the TOTAL of Grand Summary shall be deemed to be the total price for executing the Facilities and sections thereof in complete accordance with the Contract, whether or not each individual item has been priced.
3.0 We confirm that except as otherwise specifically provided our Bid Prices in this Second Envelope include all taxes, duties, levies and charges as may be assessed on us/our Associate (applicable for Foreign Bidder), our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Facilities, in and outside of India.
3.1 100% of applicable Taxes and Duties i.e GST, which are payable by the Employer under the Contract, shall be reimbursed by the Employer on production of satisfactory documentary evidence by the Contractor in accordance with the provisions of the Bidding Documents.
3.3 We confirm that we have also registered/we shall also get registered in the GST Network with a GSTIN, in all the states where the project is located and the states from which we shall make our supply of goods.
4.0 # (For Joint Venture only) We, the partners of Joint Venture submitting this bid, do agree and confirm that in case of Award of Contract on the Joint Venture, we shall be jointly and severally liable and responsible for the execution of the Contract in accordance with Contract terms and conditions.
5.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.
Thanking you, we remain,
Date : 27-Jun-2023 Printed Name : 0
Place : 0 Designation : 0
Please provide additional information of the Bidder
Business Address :
Country of Incorporation :
State/Province to be indicated :
Name of Principal Officer :
Address of Principal Officer :
Note: Bidders may note that no prescribed proforma has been enclosed for Attachment 2 : Power of Attorney. Bidders may use their own proforma for furnishing the required information with the bid.
Name of Package : Construction of residential quarters at Bikaner (Rajasthan)
Specification No. : NR1/NT/W-CIVIL/DOM/I00/23/02605 (Rfx No. 5002002740)
Completion Period 18 Months
: Attachments : General guidelines for filling up the Attachments : Package - :
Construction of residential quarters at Bikaner (Rajasthan)
Specification No.: NR1/NT/W-CIVIL/DOM/I00/23/02605 (Rfx No. 5002002740)
1 Fill up only green shaded cells in the relevent attachments.
2 Attachments 3(JV), 3(QR) 4, 4(A), 4(B), 5, 5(A), 6, 7, 9, 10, 11, 12, 13, 14, 15, 16, 17,18 and Bid Form for 1st Envelope are included here.
3 Attachment 1 Bid Security/EMD : Applicable, exempted for MSE bidder.
4 Attachment 2 Power of Attorney : No specific format is provided by POWERGRID. Bidder may use their own format.
5 Attachment 8 Manufacturer’s Authorisation Form : To be furnished as per proforma provided in the bidding document, on the letter head of the each Manufactures proposed to supply main items. Not included here.
6 Attachment 14 Integrity Pact : To be submitted as per ITB Clause No. 9.3(n) and as per remarks in the Attach 14-IP.
7 Attachment-19, Attachment-20, Attachment-21, Attachment-22, Attachment-23, Attachment-24, Attachment-25: To be submitted as per the provisions of the Bidding Documents ( Formats Attached seperately in Volume-III of Bidding Documents)
Note : Enable the Active X Control & Macros. Also ensure to keep option of "Trust acess to VBA project object Model" cheched [√]. Ensure that you work on MS Excel 2007 or higher version.
Construction of residential quarters at Bikaner (Rajasthan)
Specification No.: NR1/NT/W-CIVIL/DOM/I00/23/02605 (Rfx No. 5002002740) Sole Bidder 1
Yes JV (Joint Venture) 2
Enter following details of the bidder No
Specify type of Bidder [Select from drop down menu] Sole Bidder Sole Bidder 2 0
Whether the bidder is an MSE (Micro & Small Enterprise) Joint Venture 2 2 0
Enter the Name of Registration Authority
Name of Sole Bidder
Address of Sole Bidder
Are you a ‘Local Suppliers’ under Public Procurement (Preference to Make in India) Order, 2017 and Order dated 20/12/2018 issued by Ministry of Power Yes
Full name of Bid Signatory
Designation of Bid Signatory
E-mail ID of Bid Signatory
Mobile No. of Bid Signatory Route-1 of Annexure-A(BDS)
Specification No. :NR1/NT/W-CIVIL/DOM/I00/23/02605 (Rfx No. 5002002740) Attachment-3(JV) Sole Bidder
Construction of residential quarters at Bikaner (Rajasthan)
(Joint Venture Agreement and Power of Attorney for Joint Venture*)
Bidder’s Name and Address (Sole Bidder) : To:
Contracts & Materials dept. &
Name : Power Grid Corporation of India Ltd.,
Address : Northern Region–I, Regional Headquarter,
SCO Bay No. 5 to 10, Sector 16A,
Faridabad-121002, Haryana
Name(s) and Addresse(s) of other partner(s)
The Joint Venture Agreement (as per the proforma attached at no. 15 in Section-VI, Sample Forms and Procedures, Conditions of Contract, Vol.-I of the Bidding Documents) and Power of Attorney for Joint Venture (as per the proforma attached at no. 14 in Section-VI, Sample Forms and Procedures, Conditions of Contract, Vol.-I of the Bidding Documents) are enclosed herewith. Sole Bidder
Date : -- Printed Name : 0
Place : Designation : 18
Specification No. :NR1/NT/W-CIVIL/DOM/I00/23/02605 (Rfx No. 5002002740) Attachment-3(QR)
Construction of residential quarters at Bikaner (Rajasthan)
(Qualifying Requirement Data)
Bidder’s Name and Address (Sole Bidder) : To:
Contracts & Materials dept.
Name : Power Grid Corporation of India Ltd.,
Address : Northern Region–I, Regional Headquarter,
SCO Bay No. 5 to 10, Sector 16A,
For our Qualifying Requirements Data, please refer Attachment-QR of this volume.
Date : -- Printed Name :
Place : Designation :
NR1/NT/W-CIVIL/DOM/I00/23/02605 (Rfx No. 5002002740) ATTACHMENT-3 (QR)
Construction of residential quarters at Bikaner (Rajasthan)
(Qualifying Requirement Data)
Bidder’s Name and Address (Sole Bidder) : To:
Contracts & Materials dept.
Name: Power Grid Corporation of India Ltd.,
Address: Northern Region–I, Regional Headquarter,
SCO Bay No. 5 to 10, Sector 16A,
Faridabad-121002, Haryana
In support of the Qualification Requirements (QR) for bidders, stipulated in Annexure-A (BDS) of the Section - III (BDS), Volume-I & Additional Information required as per ITB clause 9.3(c) of the Bidding Documents, we furnish herewith our QR data/details along with other information, as follows herewith our stipulations have been reproduced in italics for ready reference, however, in case of any discrepancy the QR as given in BDS shall prevail).
We have submitted bid as :
We have submitted bid as joint venture of following firms :
[For details regarding Qualification Requirements of a Joint Venture, please refer para 4.0 below.]
We are furnishing the following details/document in support of Qualifying requirement for the subject package.
A Attached copies of original documents defining :
a) The constitution or legal status;
b) The principal place of business;
c) The place of incorporation (for bidders who are corporations); or the place of registration and the nationality of the Owners (for applicants who are partnerships or individually-owned firms).
B Attached original & copies of the following documents :
a) Written power of attorney of the signatory of the Bid to commit the bidder.
b) Joint Venture Agreement.
C Whether bidder anticipate any change in legal structure/ ownership of their organisation at present. If Yes, please enclose details of same and copy of procedural document(s) with reference to the same/ as required statutorily, as of now
1.0 GENERAL INFORMATION
Bidder is required to provide general information as per the following format.
[Where the Bidder proposes to use named subcontractor(s) for critical components of the works or for work contents in excess of ten (10) percent of the bid price, the following information should also be supplied for the subcontractor(s)].
S No. Particulars Sole Bidder
1 Name of the Firm 0 0 #REF!
2 Head Office/ Registered Office Address 0 0 #REF!
5 Contact Person
6 Place of Incorporation/ Registration
7 Year of Incorporation/ Registration
8 Nationality of
1.0 TECHNICAL REQUIREMENTS {Reference para 1.0 of Annexure-A (BDS)}
TECHNICAL EXPERIENCE
Bidder should have successfully# completed institutional / commercial / Residential buildings (RCC, PEB framed structure) as a prime contractor during the last seven (7) years as on the originally scheduled date of bid opening i.e. as per following: i. One single work/project of a value of not less than Rs. 1196.56 Lakhs including GST OR ii. Two works/projects, each of a value of not less than Rs. 747.85 Lakhs including GST OR iii. Three works/projects, each of a value of not less than Rs. 598.28 Lakhs including GST # Successfully completed means issue of provisional or final taking over certificate (TOC) by the Employer to the contractor for the referred contract.
Format for individual firm or for different Partner of a Joint Venture (JV):
Bidder’s Name : 0
Single Firm/Lead Partner/Other Partners of a JV :
1 Are you manufacturer of ventilation system
2 Name of Contract Undertaken
3 Contract Reference No. & Date of Award
4 Name and Address of the Employer/Utility for whom the Contract was executed by the firm/Partner of a JV
(a)(i) Scope of work executed under the above contract (Tick only whichever is/are applicable)
5 Details/features of the Contract undertaken relevant to the stipulated QR (as in Sl No (i) of 2.1
i) Capacity of the system
ii) Value of work Rs. in crore
6 Capacity in which the Contract was undertaken (Check One) (Tick whichever is applicable)
7 Date of Completion of Contract
8 Details of documents furnished in the Bid, in support of the aforesaid data/details/information
2.0 FINANCIAL REQUIREMENTS :
Financial Position {Reference Annexure-A (BDS)}
a) Net worth for last 3 financial years should be positive.
a) Financial Position For the purpose of this particular bid, bidders shall meet the following minimum criteria: a) Net worth of the bidder for last 3 financial years should be positive. b) Minimum Average Annual Turnover *(MAAT) for best three years i.e. 36 months out of last five financial years of the bidder should be: i) Indian Rs. 1495.70 Lakhs including GST for Package * Note- Annual Gross Revenue from operations/Gross operating income as incorporated in the profit & loss account excluding other operative income/other income c) Bidder shall have liquid assets (L.A) or/ and evidence of access to or availability of credit facilities of not less than (i). Indian Rs. 249.28 Lakhs including GST for Package
PART-C: The bidder shall also furnish following documents/details with its Bid: a. The complete annual reports together with Audited statement of accounts of the company for last five years of its own (separate) immediately preceding the date of submission of the ‘Bid’. Note: In the event the bidder is not able to furnish the information of its own (i.e. separate/ standalone), the bidder should submit the audited balance sheets, income statements, other information pertaining to it only (i.e. separate/standalone basis and exclusive of its Subsidiaries/Group/ Holding/ Parent Company) duly certified by any one of the authority (i) Statutory Auditor of the bidder (ii) Company Secretary of the bidder or (iii) A certified Public Accountant] certifying that such information/documents are based on the audited accounts as the case may be.
PART-D: 1. RELAXATION FOR MSEs/STARTUPs {as defined by MSE/DIPP (and applicable as on the originally scheduled date of bid opening)} FINANCIAL: MSEs/STARTUPs, shall also be considered qualified if they meet 80% (Eighty Percent) of the financial requirements specified at Para 2 above. 2. EXPLANATION FOR TECHNICAL & FINANCIAL POSITION TECHNICAL: Technical Experience referred at Para 1.0 above shall be: i. of that Holding company only (i.e. excluding its subsidiaries/ group companies), in case bidder is a Group/ Holding/ Parent company, OR ii. of that Subsidiary company only (i.e., excluding its holding company/ group companies), in case bidder is a Subsidiary of a holding company. FINANCIAL: Financial Position referred at Para 2.0 above shall be : i. of that Holding company only (i.e. excluding its subsidiaries/ group companies), in case bidder is a Group/ Holding/ Parent company, OR ii. of that Subsidiary company only (i.e., excluding its holding company/ group companies), in case bidder is a Subsidiary of a holding company. 3. Joint ventures (JVs) are not allowed for participation in Bids for subject package.
c) Bidder shall have liquid assets (L.A) or/ and evidence of access to or availability of credit facilities of not less than Indian Rs. 2.23 Crore
Note: In case bidder is a holding company, the Financial Position referred to in clause 1.2 shall be of that holding company only (i.e. excluding its subsidiaries/ group companies). In case bidder is a subsidiary of a holding company, the Financial Position referred to in clause 1.2 shall be of that subsidiary company only (i.e., excluding its holding company).
4.0 Financial Qualification Data: 1
Name of the Bidder
B Turnover details:
Turnover (in Crores) Details of documentary evidence submitted in support of Qualification Data
Sl No Financial year
Do you have audited results for FY 2021-22 Yes
Average Annual Turnover for best Three Years is
*(Indicate the rate(s) of exchnage against US Dollar at the end of each year, which have been used for arriving the amount at equivalent US Dollar.)
C Liquid Assets
Currency LA Equivalent US$ (in Million)
Details of evidence of having Liquid assets (LA)
Details of evidence of access to or availability of credit facilities
Networth Equivalent US$ (in Million) exchange rate* Details of documentary evidence submitted in support of Qualification Data
Currency Networth (in Millions)
Sl No Financial year
Do you have audited results for FY 2012-13 Yes
*(Indicate the rate(s) of exchnage against US Dollar at the end of each year, which have been used for arriving the amount at equivalent US Dollar.)
B Turnover details:
Turnover Equivalent US$ (in Million) exchange rate* Details of documentary evidence submitted in support of Qualification Data
Currency Turnover (in Millions)
Sl No Financial year
Do you have audited results for FY 2012-13 Yes
Average Annual Turnover for best Three Years is
*(Indicate the rate(s) of exchnage against US Dollar at the end of each year, which have been used for arriving the amount at equivalent US Dollar.)
C Liquid Assets
Currency LA Equivalent US$ (in Million)
Details of evidence of having Liquid assets (LA)
Details of evidence of access to or availability of credit facilities
4.0 Joint Venture (JV) Firms {Reference para 3.0 of Annexure-A (BDS)}
4.1 In accordance with the above, in case of JV bidders, it should be ensured that necessary details including those pertaining to each JV partner are furnished and the documents are submitted alongwith the bid. Further, the JV bidders should also ensure that other requirements are complied with. The lists of documents furnished are to be indicated below :
5.0 The Bidder shall also furnish following documents/details with its bid. {Reference ITB clause 9.3 (c)}
5.1 The complete annual reports together with Audited statement of accounts of the company for last five years of its own (separate) immediately preceding the date of submission of bid.
Note I. In the event the bidder is not able to furnish the information of its own (i.e separate), being a subsidiary company and its accounts are being consolidated with its group/holding/parent company, the bidder should submit the audited balance sheets, income statements, other information pertaining to it only (not of its group/Holding/Parent Company) duly certified by any one of the authority [ (i) Statutory Auditor of the bidder /(ii) Company Secretary of the bidder or (iii) A certified Public Accountant] certifying that such information/documents are based on the audited accounts as the case may be.
II. Similarly, if the bidder happens to be a Group/Holding/Parent Company, the bidder should submit the above documents/information of its own (i.e. exclusive of its subsidiaries) duly certified by any one of the authority mentioned in Note-I above certifying that these information/documents are based on the audited accounts, as the case may be.
5.2 The Bidder should accordingly also provide the following information/documents (In case of JV bidders, information should be provided separately for all the Partners of JV in the given format):
Audited balance sheet and income statements for the last five years as per the following:
A Years preceding to the bid opening Audited Balance Sheet and Income Statements enclosed Audited Balance Sheet and Income Statements enclosed Audited Balance Sheet and Income Statements enclosed
1st Year Yes Yes
2nd Year Yes Yes
3rd Year Yes Yes
4th Year Yes Yes
5th Year Yes Yes
5.3 Whether bidder organisation is underway of Financial re-structuring. If Yes, please enclose the details of same and data/ documents establishing the same
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-CIVIL/DOM/I00/23/02605 (Rfx No. 5002002740) Attachment-4
Construction of residential quarters at Bikaner (Rajasthan)
(Form of Certificate of Origin and Eligibility)
Bidder’s Name and Address (Sole Bidder) : To:
Contracts & Materials dept.
Name : Power Grid Corporation of India Ltd.,
Address : Northern Region–I, Regional Headquarter,
SCO Bay No. 5 to 10, Sector 16A,
Faridabad-121002, Haryana
We hereby certify that equipment and materials to be supplied are produced in [Name of Countries], eligible source country. Equipments & Materials produced in [Name of countries] Company incorporated & registered in [Name of countries]
We hereby certify that our company is incorporated and registered in [Name of Countries], eligible source country. [Name of Countries] [Name of Countries] [Name of Countries], [Name of Countries],
Date : -- Printed Name :
Place : Designation :
country. country. [Name of Countries], [Name of Countries],
Specification No. :NR1/NT/W-CIVIL/DOM/I00/23/02605 (Rfx No. 5002002740) Attachment-4(A)
Construction of residential quarters at Bikaner (Rajasthan)
(List of Special Maintenance Tools & Tackles)
Bidder’s Name and Address (Sole Bidder) : To:
Contracts & Materials dept.
Name : Power Grid Corporation of India Ltd.,
Address : Northern Region–I, Regional Headquarter,
SCO Bay No. 5 to 10, Sector 16A,
Faridabad-121002, Haryana
We are furnishing below the list of special maintenance tools & tackles for various equipment under the subject package. The prices for these tools & tackles are included in our lumpsum bid price. We further confirm that the list of special maintenance tools & tackles includes all the items specifically identified in your bidding documents as brought out below:
S.No. For Equipment Item Description Unit Quantity
Notwithstanding what is stated above, we further confirm that any additional special maintenance tools and tackles, required for the equipment under this package shall be furnished by us at no extra cost to the employer.
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-CIVIL/DOM/I00/23/02605 (Rfx No. 5002002740) Attachment-4(B)
Construction of residential quarters at Bikaner (Rajasthan)
(List of Special Maintenance Tools & Tackles)
Bidder’s Name and Address (Sole Bidder) : To:
Contracts & Materials dept.
Name : Power Grid Corporation of India Ltd.,
Address : Northern Region–I, Regional Headquarter,
SCO Bay No. 5 to 10, Sector 16A,
Faridabad-121002, Haryana
We are furnishing below the list of special maintenance tools & tackles for various equipment under the subject package. The prices for these tools & tackles which are to be taken back after the completion of the work by us are not included in our lumpsum bid price. We further confirm that the list of special maintenance tools & tackles includes all the items specifically identified in your bidding documents as brought out below:
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-CIVIL/DOM/I00/23/02605 (Rfx No. 5002002740) Attachment-5
Construction of residential quarters at Bikaner (Rajasthan)
(Bought-out & Sub-contracted Items)
Bidder’s Name and Address (Sole Bidder) : To:
Contracts & Materials dept.
Name : Power Grid Corporation of India Ltd.,
Address : Northern Region–I, Regional Headquarter,
SCO Bay No. 5 to 10, Sector 16A,
Faridabad-121002, Haryana
We hereby furnish the details of the items/ sub-assemblies, we propose to buy for the purpose of furnishing and installation of the subject Package:
Sl. No. Item Description Quantity proposed to be bought/sub-contracted Details of the proposed sub-contractor/sub-vendor
Name Nationality
We hereby declare that, we would not subcontract the erection portion of the contract without the prior approval of Employer.
We hereby furnish the details of the items/ sub-assemblies propose to supply from our own works (i.e. as direct transactions) in additiona to the supplies the same from other vendors (i.e. as Bought-out transactions) as detailed in the table given above.
Sl. No. Item Description Quantity proposed to be supplied Details of the plant from where supplies are proposed.
Name of Plant Address
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-CIVIL/DOM/I00/23/02605 (Rfx No. 5002002740) Annexure I to Attachment-5
(Bought-out & Sub-contracted Items)
Sl. No. Item Description Quantity proposed to be bought/sub-contracted Details of the proposed sub-contractor/sub-vendor
Name Nationality
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-CIVIL/DOM/I00/23/02605 (Rfx No. 5002002740) Annexure I to Attachment-5
(Bought-out & Sub-contracted Items)
Sl. No. Item Description Details of the proposed sub-contractor/sub-vendor Details of the proposed sub-contractor/sub-vendor
Name Nationality
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-CIVIL/DOM/I00/23/02605 (Rfx No. 5002002740) Attachment-5A
Construction of residential quarters at Bikaner (Rajasthan)
(Items, Components, Raw Material, Services proposed to be sourced from Micro and Small Enterprises)
Bidder's Name and Address: Contracts & Materials dept.
Power Grid Corporation of India Ltd.,
Name : Northern Region–I, Regional Headquarter,
Address : SCO Bay No. 5 to 10, Sector 16A,
Faridabad-121002, Haryana
1 We hereby furnish the details of the items, components, raw material, services which we propose to buy/avail from Micro and Small Enterprises (MSEs) for the purpose of completion of works under the subject package:
Sl. No. Item Description Quantity proposed to be bought/sub-contracted Name of Micro and Small Enterprises (MSEs)
Name Category (Micro or Small)
2 The above is a list of items we propose to procure from MSEs. However, based on the situations during the execution of the contract, the above list may undergo changes. We hereby confirm that the details regarding actual procurement from MSEs carried out by us, as per the format provided at Section VI, Forms and Procedures, Volume-I of bidding documents, shall be submitted along with the bills for payment against supplies made/works done during execution of contract.
We hereby furnish the details of the items/ sub-assemblies propose to supply from our own works (i.e. as direct transactions) in additiona to the supplies the same from other vendors (i.e. as Bought-out transactions) as detailed in the table given above.
Sl. No. Item Description Quantity proposed to be supplied Details of the plant from where supplies are proposed.
Name of Plant Address
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-CIVIL/DOM/I00/23/02605 (Rfx No. 5002002740) Attachment-5A
(Bought-out & Sub-contracted Items)
Sl. No. Item Description Quantity proposed to be bought/sub-contracted Name of Micro and Small Enterprises (MSEs)
Name Category (Micro or Small)
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-CIVIL/DOM/I00/23/02605 (Rfx No. 5002002740) Attachment-6
Construction of residential quarters at Bikaner (Rajasthan)
(Alternative, Deviations and Exceptions to the Provisions)
Bidder’s Name and Address (Sole Bidder) : To:
Contracts & Materials dept.
Name : Power Grid Corporation of India Ltd.,
Address : Northern Region–I, Regional Headquarter,
SCO Bay No. 5 to 10, Sector 16A,
Faridabad-121002, Haryana
The bidder shall itemize any deviation from the Specifications included in his bid. Each item shall be listed (separate sheets may be used and enclosed with this Attachment) with the following information:
Sl. No. Reference clause in the Specifications Deviation Cost of withdrawal of the deviation
The above deviations and variations are exhaustive. We confirm that we shall withdraw the deviations proposed by us at the cost of withdrawal indicated in this attachment, failing which our bid may be rejected and Bid Security forfeited.
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-CIVIL/DOM/I00/23/02605 (Rfx No. 5002002740) Annexure I toAttachment-6
(Alternative, Deviations and Exceptions to the Provisions)
Sl. No. Reference clause in the Specifications Deviation Cost of withdrawal of the deviation
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-CIVIL/DOM/I00/23/02605 (Rfx No. 5002002740) Attachment-7
Construction of residential quarters at Bikaner (Rajasthan)
(Details of Alternative Bid)
Bidder’s Name and Address (Sole Bidder) : To:
Contracts & Materials dept.
Name : Power Grid Corporation of India Ltd.,
Address : Northern Region–I, Regional Headquarter,
SCO Bay No. 5 to 10, Sector 16A,
Faridabad-121002, Haryana
No Alternative Bid
Date : -- Printed Name :
Place : Designation :
NR1/NT/W-CIVIL/DOM/I00/23/02605 (Rfx No. 5002002740) Attachment-9
Construction of residential quarters at Bikaner (Rajasthan)
(Work Completion Schedule)
Bidder’s Name and Address (Sole Bidder) : To:
Contracts & Materials dept.
Name : Power Grid Corporation of India Ltd.,
Address : Northern Region–I, Regional Headquarter,
SCO Bay No. 5 to 10, Sector 16A,
Faridabad-121002, Haryana
We hereby declare that the following Work Completion Schedule shall be followed by us in furnishing and installation of the subject Package i.e., Construction of residential quarters at Bikaner (Rajasthan) for the period commencing from the effective date of Contract to us :
Sl. No. Description of Work Period in months from the effective date of contract
1 Detailed Engineering and drawing submission
a) commencement
2 Establishment of site office
a) commencement
a) commencement
6 Establishment of site office
3 Carrying of work
a) commencement
b) completion 18
4 Testing & commissioning
a) commencement
b) completion 9
9 Trial Operation
a) commencement
Date : -- Printed Name :
Place : Designation :
Note : Bidders to enclose a detailed network covering all the activities to be undertaken for completion of the project indicating key dates for various milestones for each phase constituent-wise.
Specification No. :NR1/NT/W-CIVIL/DOM/I00/23/02605 (Rfx No. 5002002740) Attachment-10
Construction of residential quarters at Bikaner (Rajasthan)
(Guarantee Declaration)
Bidder’s Name and Address (Sole Bidder) : To:
Contracts & Materials dept.
Name : Power Grid Corporation of India Ltd.,
Address : Northern Region–I, Regional Headquarter,
SCO Bay No. 5 to 10, Sector 16A,
Faridabad-121002, Haryana
Dear Sir, We declare that the equipments offered shall have minimum (or a maximum, as the case may be) performance specified in Technical Specification. We further guarantee the performance/efficiency of the equipments in response to the Technical Specifications.
Date -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-CIVIL/DOM/I00/23/02605 (Rfx No. 5002002740) Attachment-11
Construction of residential quarters at Bikaner (Rajasthan)
(Information regarding Ex-employees of POWERGRID in our Organisation)
Bidder’s Name and Address (Sole Bidder) : To:
Contracts & Materials dept.
Name : Power Grid Corporation of India Ltd.,
Address : Northern Region–I, Regional Headquarter,
SCO Bay No. 5 to 10, Sector 16A,
Faridabad-121002, Haryana
We declare that we are aware of and have gone through the “Code of Business Conduct and Ethics for Senior Management Personnel”1 and “Code of Business Conduct and Ethics for Board Members”1 of POWERGRID (hereinafter referred to as the “Code of Conduct”). We further understand that as per the “Code of Conduct”, Senior Management Personnel including Board Members, who have retired/resigned from POWERGRID, shall not accept any appointment or post, as detailed in the referred “Code of Conduct”, within 1 year from the date of cessation of service/directorship unless approved by the Competent Authority. Accordingly, we hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:
Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation*
*In case the date of joining in the bidder’s organization of such ex-employee is within 1 year from the date of retirement/resignation from POWERGRID, No Objection Certificate/ approval from the Competent Authority must be furnished along with the bid or subsequent through clarification pursuant to ITB Clause 21.
In case of non-submission of No Objection Certificate/approval of the Competent Authority, as required, We understand that POWERGRID shall deal with such cases as per its Policy and procedures in vogue, which may also result in rejection of our bid. We also confirm that POWERGRID shall be the sole judge in this regard. We further declare that any misrepresentation or submission of false/forged documents/information in this regard shall be dealt with as per the provisions of the Integrity Pact and/or the Bidding Documents and/or POWERGRID’s policy and procedures.
Date : -- Printed Name :
Place : Designation :
Note: 1. “Code of Business Conduct and Ethics for Senior Management Personnel” and “Code of Business Conduct and Ethics for Board Members” are available on POWERGRID’s website https://www.powergridindia.com. 2. The information in similar format should be furnished for each partner of joint venture in case of joint venture bid. 3. In case bidder has furnished no details on ex-employees of POWERGRID or has left blank or has indicated ‘-‘ against the same, it shall be deemed that they have not employed any such person in their organization.
SPEC. NO.: CC-CS/1059-NR3/GIS-4170/10/G7 ATTACHMENT-12
Construction of residential quarters at Bikaner (Rajasthan)
(Price Adjustment Data)
Bidder’s Name and Address (Sole Bidder) : To:
0 Contracts & Materials dept.
Name : Power Grid Corporation of India Ltd.,
Address : Northern Region–I, Regional Headquarter,
SCO Bay No. 5 to 10, Sector 16A,
Faridabad-121002, Haryana
PRICES REMAIN FIRMS AND FIXED
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-MISC/DOM/I00/22/00715 Attachment-12
Construction of residential quarters at Bikaner (Rajasthan)
(Price Adjustment Data)
Bidder’s Name and Address : To:
Contract Services
Name : Power Grid Corporation of India Ltd.,
Address : "Saudamini", Plot No. 2, Sector 29
Gurgaon (Haryana) - 122001
We hereby furnish the relevant details pertaining to the price adjustment provisions for equipment as specified in your specifications and documents for the Construction of residential quarters at Bikaner (Rajasthan). The necessary documentary evidence are enclosed :
Sl. No. Name of Materials Value of co-efficient Name of the published index Value of index
A For Erection Price Component
1 Installation Price Component [including Civil Works but excluding ‘Supply & Placement of reinforcement steel’ and ‘Concreting’]
A High Speed Diesel, coefficient a = Wholesale Price Index Number for `HSD’(Individual Commodity) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in)
L Labour, coefficient l = Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2016= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).
Coefficient ‘a’ shall be between 0.20 to 0.24 and coefficient ‘l’ shall be between 0.56 to 0.60 and sum of Coefficients ‘a’ and ‘l’ shall be 0.80
2 Supply & Placement of Reinforcement Steel
A High Speed Diesel, coefficient a = Wholesale Price Index Number for `HSD’(Individual Commodity) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in).
L Labour, coefficient l = Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2016= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).
B Manufacture of Basic Metals, coefficient b = Wholesale Price Index Number for `Manufacture of Basic Metals’(Group Item) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in).
Coefficient ‘a’ shall be between 0.09 to 0.11 and coefficient ‘b’ shall be between 0.63 to 0.67 and coefficient ‘l’ shall be between 0.04 to 0.06 and sum of Coefficients ‘a’, ’b’ and ‘l’ shall be 0.80
3 For Concreting
A High Speed Diesel, coefficient a = Wholesale Price Index Number for `HSD’(Individual Commodity) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in).
L Labour, coefficient l = Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2016= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).
B Manufacture of cement, lime and plaster, coefficient b = Wholesale Price Index Number for `Manufacture of cement, lime and plaster’(Group Item) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in).
C Cutting, shaping and finishing of stone, coefficient c = Wholesale Price Index Number for `Cutting, shaping and finishing of stone’(Group Item) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in).
Coefficient ‘a’ shall be between 0.18 to 0.22 and coefficient ‘b’ shall be between 0.25 to 0.35 and coefficient ‘c’ shall be between 0.18 to 0.22 and coefficient ‘l’ shall be between 0.09 to 0.11 and sum of Coefficients ‘a’, ’b’, 'c' and ‘l’ shall be 0.80
B.1 Hardware Fittings
i) Raw Material
a EC Grade Aluminium Ingots, coefficient a = IEEMA
b Electrolytic High Grade Zinc, coefficient b = IEEMA
c Manufacture of Basic Metals, coefficient c= Wholesale Price Index Number for `Manufacture of Basic Metals’(Group Item) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in).
ii) Labour, coefficient l = 0.80 Indian Labour Bureau, Shimla, Govt. of India (monthly) (Base: 2001 = 100) (www.labourbureau.nic.in)
Coefficient ‘a’ shall be between 0.35 to 0.45 and coefficient ‘b’ shall be between 0.04 to 0.06 and coefficient ‘c’ shall be between 0.18 to 0.22 and coefficient ‘l’ shall be between 0.13 to 0.17 and sum of Coefficients ‘a’, ‘b’, ‘c’ and ‘l’ shall be 0.80
B.2 Conductor Accessories
(a) Mid Span Compression Joint for Conductor
i) Raw Material
A EC Grade Aluminium Ingots, coefficient a = IEEMA
ii) Labour, coefficient l = 0.80 Indian Labour Bureau, Shimla, Govt. of India (monthly) (Base: 2001 = 100) (www.labourbureau.nic.in)
Coefficient ‘a’ shall be between 0.63 to 0.67 and coefficient ‘l’ shall be between 0.13 to 0.17 and sum of Coefficients ‘a’ and ‘l’ shall be 0.80
(b) Repair Sleeve for Conductor
i) Raw Material
A EC Grade Aluminium Ingots, coefficient a = IEEMA
ii) Labour, coefficient l = 0.80 Indian Labour Bureau, Shimla, Govt. of India (monthly) (Base: 2001 = 100) (www.labourbureau.nic.in)
Coefficient ‘a’ shall be between 0.63 to 0.67 and coefficient ‘l’ shall be between 0.13 to 0.17 and sum of Coefficients ‘a’ and ‘l’ shall be 0.80
(c) Vibration damper for Conductor
i) Raw Material
A EC Grade Aluminium Ingots, coefficient a = IEEMA
ii) Labour, coefficient l = 0.80 Indian Labour Bureau, Shimla, Govt. of India (monthly) (Base: 2001 = 100) (www.labourbureau.nic.in)
Coefficient ‘a’ shall be between 0.63 to 0.67 and coefficient ‘l’ shall be between 0.13 to 0.17 and sum of Coefficients ‘a’ and ‘l’ shall be 0.80
d) Flexible Copper Bond shall be on FIRM PRICE BASIS
C. For Erection Price Component
1 Installation Price Component {including civil works but excluding ‘supply & placement of reinforcement steel’, ‘concreting’, survey, soil investigation and aviation signal for river crossing towers(if any)}
A HSD, coefficient a = Wholesale Price Index Number for ‘HSD’ (Individual commodity) (monthly) (Base: 2011-12=100) as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in).
L Labour, coefficient l = 0.80 Indian Labour Bureau, Shimla, Govt. of India (monthly) (Base: 2001 = 100) (www.labourbureau.nic.in)
Coefficient ‘a’ shall be between 0.20 to 0.24 and coefficient ‘l’ shall be between 0.56 to 0.60 and sum of Coefficients ‘a’ and ‘l’ shall be 0.80
2 Supply & Placement of Reinforcement Steel
A HSD, coefficient a = Wholesale Price Index Number for ‘HSD’ (Individual commodity) (monthly) (Base: 2011-12=100) as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in).
L Labour, coefficient l = Indian Labour Bureau, Shimla, Govt. of India (monthly) (Base: 2001 = 100) (www.labourbureau.nic.in)
B Manufacture of Basic Metals, coefficient b = 0.80 Wholesale Price Index Number for ‘Manufacture of Basic Metals’ (Group Item) (monthly) (Base: 2011-12=100) as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in).
Coefficient ‘a’ shall be between 0.09 to 0.11 and coefficient ‘b’ shall be between 0.63 to 0.67 and coefficient ‘l’ shall be between 0.04 to 0.06 and sum of Coefficients ‘a’, ’b’ and ‘l’ shall be 0.80
3 For Concreting
A HSD, coefficient a = Wholesale Price Index Number for ‘HSD’ (Individual commodity) (monthly) (Base: 2011-12=100) as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in).
L Labour, coefficient l = Indian Labour Bureau, Shimla, Govt. of India (monthly) (Base: 2001 = 100) (www.labourbureau.nic.in)
B Manufacture of Cement, Lime & Plaster, coefficient b = Wholesale Price Index Number for ‘Manufacture of Cement, Lime & Plaster’ (Group Item) (monthly) (Base: 2011-12=100) as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in).
C Cutting, Shaping and finishing of stone, coefficient c = 0.80 Wholesale Price Index Number for ‘Cutting, Shaping and finishing of stone’ (Group Item) (monthly) (Base: 2011-12=100) as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in).
Coefficient ‘a’ shall be between 0.18 to 0.22 and coefficient ‘b’ shall be between 0.25 to 0.35 and coefficient ‘c’ shall be between 0.18 to 0.22 and coefficient ‘l’ shall be between 0.09 to 0.11 and sum of Coefficients ‘a’, ’b’, 'c' and ‘l’ shall be 0.80
The Bidders are required to estimate and indicate the values of different coefficients for each of the items in the price variation formulae within the specified range such that their summation is as specified in the Bidding Documents. Where no value or ‘-’ or ‘shall be furnished later’ is specified against the coefficient, the same will be deemed to be zero and the fixed component would be suitably adjusted. If the values of all coefficients in price variation formulae indicated by the Bidder are within the specified range but their sum exceeds the summation specified in the Bidding Documents, the values of the coefficients shall be pro-rata adjusted such that the summation remains as per the provisions of the Bidding Documents. If the values of all coefficients indicated by the Bidder are within the specified range but their summation is less than the value specified in the Bidding Documents, the values of the coefficients as indicated by the Bidder shall be considered as such and the fixed component in the price variation formulae would be suitably adjusted. Further, if any of values of the coefficients indicated by the Bidder is out of the range specified in the Bidding Documents, the lower of the values, as indicated by the Bidder vis-à-vis lower value of the range for that coefficient specified in the Bidding Documents, shall be considered and the fixed component would be suitably adjusted.
Date : Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-CIVIL/DOM/I00/23/02605 (Rfx No. 5002002740) Attachment-13
Construction of residential quarters at Bikaner (Rajasthan)
(Declaration regarding Social Accountability)
Bidder’s Name and Address (Sole Bidder) : To:
Contracts & Materials dept.
Name : Power Grid Corporation of India Ltd.,
Address : Northern Region–I, Regional Headquarter,
SCO Bay No. 5 to 10, Sector 16A,
Faridabad-121002, Haryana
We conform that we stand committed to comply to all requirements of Social Accountability Standards i.e., SA8000 (latest Standard available at www.sa-intl.org) and maintain the necessary records.
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-CIVIL/DOM/I00/23/02605 (Rfx No. 5002002740) Attachment-14
Construction of residential quarters at Bikaner (Rajasthan)
Bidder’s Name and Address (Sole Bidder) : To:
Contracts & Materials dept.
Name : Power Grid Corporation of India Ltd.,
Address : Northern Region–I, Regional Headquarter,
SCO Bay No. 5 to 10, Sector 16A,
Faridabad-121002, Haryana
Integrity Pact is annexed herewith this Volume.
Date : -- Printed Name :
Place : Designation :
Instruction for printing & submitting Integrity Pact
1. The requisite format of Integrity Pact is getting generated automatically and displayed here below.
2. Take print out of first page on a non-judicial stamp paper of Rs. 100/- and other seven pages on plain A4 size paper. Such two sets shall be prepared by the bidder.
3. All the pages of both the copies of the Integrity Pact shall be signed by the authorised representative of the bidder and duly stamped.
4. Both the original copies shall be submitted by the bidder in the form of Hard Copy as part of the first envelope before due date & time of submission of the bid.
5. For further details bidders may please refer ITB Clause 9.3 (o).
Power Grid Corporation of India Limited
having its Registered Office at B-9, Qutab Institutional Area, Katwaria Sarai,New Delhi – 110016 hereinafter referred to as
having its Registered Office at
hereinafter referred to as
"The Bidder/Contractor"
POWERGRID intends to award, under laid-down organisational procedures, contract(s) for Construction of residential quarters at Bikaner (Rajasthan)
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)
Integrity Pact Page 1 of 8
Construction of residential quarters at Bikaner (Rajasthan) Package and Specification Number NR1/NT/W-CIVIL/DOM/I00/23/02605 (Rfx No. 5002002740) POWERGRID values full compliance with all relevant laws of the land, rules, regulations, economic use of resources, and of fairness / transparency in its relations with its Bidders/ Contractors.
In order to achieve these goals, POWERGRID and the above named Bidder/Contractor enter into this agreement called 'Integrity Pact' which will form a part of the bid.
It is hereby agreed by and between the parties as unde r:
Section I - Commitments of POWERGRID
(1) POWERGRID commits itself to take all measures necessary to prevent corruption and to observe the following principles :
a) No employee of POWERGRID, personally or through family members, will in connection with the tender, or the execution of the contract, demand, take a promise for or accept, for him/herself or third person, any material or other benefit which he/she is not legally entitled to.
b) POWERGRID will, during the tender process treat all Bidder(s) with equity, fairness and reason. POWERGRID will in particular, before and during the tender process, provide to all Bidder(s) the same information and will not provide to any Bidder(s) confidential/ additional information through which the Bidder(s) could obtain an advantage in relation to the tender process or the contract execution.
c) POWERGRID will exclude from evaluation of Bids its such employee(s) who has any personal interest in the Companies/Agencies participating in the Bidding/Tendering process and all known prejudiced persons.
(2) If POWERGRID obtains information on the conduct of any of its employee which is a criminal offence under the IPC / PC Act , or if there be a substantive suspicion in this regard, POWERGRID will inform its Chief Vigilance Officer and in addition disciplinary actions can be initiated under POWERGRID’s Rules.
Section II - Commitments of the Bidder/Contractor
(1) The Bidder/Contractor commits itself to take all measures necessary to prevent corruption. The Bidder/Contractor commits itself to observe the following principles during its participation in the tender process and during the contract execution:
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)
Integrity Pact Page 2 of 8
a) The Bidder/Contractor will not, directly or through any other person or firm, offer, promise or give to any of POWERGRID's employees involved in the tender process or the execution of the contract or to any third person any material or other benefit which it is not legally entitled to, in order to obtain in exchange an advantage of any kind whatsoever during the tender process or during the execution of the contract.
b) The Bidder/Contractor will not enter into any illegal or undisclosed agreement or understanding, whether formal or informal with other Bidders/Contractors. This applies in particular to prices, specifications, certifications, subsidiary contracts, submission or non-submission of bids or actions to restrict competitiveness or to introduce cartelization in the bidding process.
c) The Bidder/Contractor shall not pass any information provided by POWERGRID as part of business relationship to others and shall not commit any offence under PC / IPC Act.
d) The Bidder/Contractor of foreign origin shall disclose the name and address of the Agents/representatives in India, if any, involved directly or indirectly in the Bidding. Similarly, the Bidder/Contractor of Indian Nationality shall furnish the name and address of the foreign principals, if any, involved directly or indirectly in the Bidding.
e) The Bidder/Contractor will, when presenting his bid, disclose any and all payments made, or committed to or intends to make to agents, brokers or any other intermediaries in connection with the award of the contract and/or with the execution of the contract.
f) The Bidder/Contractor will not misrepresent facts or furnish false/forged documents/information in order to influence the bidding process or the execution of the contract to the detriment of POWERGRID.
g) The Bidder/Contractor shall ensure adoption of Integrity Pact by its Sub-contractors and shall be responsible for the same.
(2) The Bidder/Contractor will not instigate third persons to commit offences outlined above or be an accessory to such offences.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)
Integrity Pact Page 3 of 8
Section III- Disqualification from tender process and exclusion from future contracts
(1) If the Bidder, before contract award, has committed a transgression through a violation of Section II or in any other form such as to put his reliability or credibility as Bidder into question, POWERGRID may disqualify the Bidder from the tender process or terminate the contract, if already signed, for such reason.
(2) If the Bidder/Contractor has committed a transgression through a violation of Section II such as to put his reliability or credibility into question, POWERGRID may, after following due procedures, ban /blacklist the Bidder/Contractor in line with POWERGRID’s policy for “Black-Listing of Firms / Banning of Business”. The imposition and duration of the ban will be determined by the severity of the transgression. The severity will be determined by the circumstances of the case, in particular the number of transgressions, the position of the transgressors within the company hierarchy of the Bidder/Contractor and the amount of the damage. The ban will be imposed for a maximum of 3 years.
(3) If the Bidder/Contractor can prove that he has restored/recouped the damage caused by him and has installed a suitable corruption prevention system, POWERGRID may revoke the ban prematurely.
Section IV - Liability for violation of Integrity Pact
(1) If POWERGRID has disqualified the Bidder from the tender process prior to the award under Section III, POWERGRID is entitled for forfeiture of the Bid Guarantee under the Bid.
(2) If POWERGRID has terminated the contract under Section III or if POWERGRID is entitled to terminate the contract under Section III, POWERGRID shall be entitled to forfeit the Contract Performance Guarantee of this contract, in full or part thereof as may be decided, besides resorting to other remedies under the contract.
Section V- Previous Transgression
(1) The Bidder shall disclose in its Bid any transgressions occurred in the last 10 years with any other Public Sector Undertaking or Government Department or any other Company, in any country, that may impinge on the Anti-corruption principle.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)
Integrity Pact Page 4 of 8
(2) If the Bidder makes incorrect statement on this subject, it can be disqualified from the tender process or the contract, if already awarded, can be terminated for such reason and further action can be taken in line with POWERGRID’s policies.
Section VI - Equal treatment to all Bidders / Contractors
(1) POWERGRID will enter into agreements with identical conditions as this one with all Bidders.
(2) POWERGRID will disqualify from the tender process any bidder who does not sign this Pact or violate its provisions.
Section VII - Punitive Action against violating Bidders / Contractors
If POWERGRID obtains knowledge of conduct of a Bidder or a Contractor or its subcontractor or of an employee or a representative or an associate of a Bidder or Contractor or his Subcontractor which constitutes corruption, or if POWERGRID has substantive suspicion in this regard, POWERGRID will inform the Chief Vigilance Officer (CVO).
(*)Section VIII - Independent External Monitor/Monitors
(1) POWERGRID has appointed a panel of Independent External Monitors (IEMs) for this Pact with the approval of Central Vigilance Commission (CVC), Government of India. The names of the IEMs have been indicated in the Bidding Documents.
(2) The panel of IEMs shall review independently and objectively, whether and to what extent the parties comply with the obligations under this agreement. The panel of IEMs has right of access to all project documentation. The panel of IEMs may examine any complaint received by them and submit a report to Chairman-cum-Managing Director, POWERGRID, giving joint findings, at the earliest. The panel of IEMs may also submit a report directly to the CVO and the CVC, in case of suspicion of serious irregularities attracting the provisions of the PC Act.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)
Integrity Pact Page 5 of 8
(3) The IEM is not subject to instructions by the representatives of the parties and performs his functions neutrally and independently. He / She reports to the Chairman-cum-Managing Director, POWERGRID.
(4) The Bidder(s)/Contractor(s) accepts that the IEM has the right to access without restriction to all documentation of POWERGRID related to this contract including that provided by the Contractor/Bidder. The Bidder/Contractor will also grant the IEM, upon his / her request and demonstration of a valid interest, unrestricted and unconditional access to their documentation. The same is applicable to Subcontractors. The IEM is under contractual obligation to treat the information and documents of the Bidder(s)/Contractor(s)/Subcontractor(s) with confidentiality.
(5) POWERGRID will provide to the IEMs information as sought by him / her which could have an impact on the contractual relations between POWERGRID and the Bidder/Contractor related to this contract. The IEMs shall also sign declaration on ’Non-Disclosure of Confidential Information’ and of ‘Absence of Conflict of Interest’. In case of any conflict of interest arising at a later date, the IEM shall inform Chairman-cum-Managing Director, POWERGRID and recuse himself/herself from that case
(6) As soon as the IEM notices, or believes to notice, a violation of this agreement, he / she will so inform the Chairman-cum-Managing Director, POWERGRID and request the Chairman-cum-Managing Director, POWERGRID to discontinue or take corrective action, or to take other relevant action. The IEM can in this regard submit non-binding recommendations. Beyond this, the IEM has no right to demand from the parties that they act in a specific manner, refrain from action or tolerate action. However, the IEM shall give an opportunity to POWERGRID and the Bidder/Contractor, as deemed fit, to present its case before making its recommendations to POWERGRID.
(7) The IEM will submit a written report to the Chairman-cum-Managing Director, POWERGRID within 8 to 10 weeks from the date of reference or intimation to him by POWERGRID and, should the occasion arise, submit proposals for correcting problematic situations.
(8) If the IEM has reported to the Chairman-cum-Managing Director, POWERGRID, a substantiated suspicion of an offence under PC / IPC Act, and the Chairman-cum-Managing Director, POWERGRID has not, within the reasonable time taken visible action to proceed against such offence or reported it to the CVO, the Monitor may also transmit this information directly to the CVC, Government of India.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)
Integrity Pact Page 6 of 8
(9) While representing any matter in relation to the Integrity pact inter-alia including its transgression to the panel of IEMs, POWERGRID and Bidder/Contractor shall not approach the court of law and await the decision of the IEM in the matter.
(10) The word ‘IEM’ would include both singular and plural.
(*) This Section shall be applicable for only those packages wherein the IEMs have been identified in Section – I : Invitation for Bids and/or Clause ITB 9.3 in Section – III: Bid Data Sheets of Conditions of Contract, Volume-I of the Bidding Documents.
Section IX - Pact Duration
This Pact begins when both parties have legally signed it. It expires for the Contractor after the closure of the contract and for all other Bidder's six month after the contract has been awarded.
Section X - Other Provisions
(1) This agreement is subject to Indian Law. Place of performance and jurisdiction is the establishment of POWERGRID. The Arbitration clause provided in the main tender document / contract shall not be applicable for any issue / dispute arising under Integrity Pact.
(2) Changes and supplements as well as termination notices need to be made in writing. Side agreements have not been made.
(3) If the Contractor is a partnership firm or a consortium or Joint Venture, this agreement must be signed by all partners, consortium members and Joint Venture partners.
(4) Nothing in this agreement shall affect the rights of the parties available under the General Conditions of Contract (GCC) and Special Conditions of Contract (SCC).
(5) Issues like Warranty/Guarantees etc. shall be outside the purview of IEMs.
(6) Views expressed or suggestions/submissions made by the parties and the recommendations of the CVO/IEM# in respect of the violation of this agreement, shall not be relied on or introduced as evidence in the arbitral or judicial proceedings (arising out of the arbitral proceedings) by the parties in connection with the disputes/differences arising out of the subject contract.
# CVO shall be applicable for packages wherein IEM are not identified in Section IFB/BDS of Condition of Contract, Volume-I. IEM shall be applicable for packages wherein IEM are identified in Section IFB/BDS of Condition of Contract, Volume-I.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)
Integrity Pact Page 7 of 8
(7) Should one or several provisions of this agreement turn out to be invalid, the remainder of this agreement remains valid. In this case, the parties will strive to come to an agreement to their original intentions.
Signature Signature
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)
(Office Seal) (Office Seal)
Designation : Designation :
Witness 1 : Witness 1 :
Designation : Designation :
Witness 2 : Witness 2 :
Designation : Designation :
Integrity Pact Page 8 of 8
Specification No. :NR1/NT/W-CIVIL/DOM/I00/23/02605 (Rfx No. 5002002740) Attachment-15
Construction of residential quarters at Bikaner (Rajasthan)
Option for Initial Advance (either Interest Bearing Initial Advance or No Initial Advance) and Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise
Bidder’s Name and Address (Sole Bidder) : Contracts & Materials dept.
Name : Power Grid Corporation of India Ltd.,
Address : Northern Region–I, Regional Headquarter,
SCO Bay No. 5 to 10, Sector 16A,
Faridabad-121002, Haryana
I We have read the provisions in the Bidding Documents regarding furnishing the option for advance payment. Accordingly, as per ITB Clause 9.3 as provided in Section BDS, Section III, Vol.-I of the Bidding Documents, we hereby confirm to opt the following:
Interest Bearing Initial Advance
Supply Portion:
Services Portion:
II We are furnishing the following details of Statutory Registration Numbers and details of Bank for electronic payment.
1. Name of the Supplier/ Contractor in whose favour payment is to be made
2. Address with PIN Code and State
Registered Office:
Correspondence Address:
3 (a). Status – Company/others
[Declaration of Micro/ Small/ Medium Enterprise under Micro/ Small & Medium Enterprises Development Act 2006, if applicable]
3 (b). Are you a MSE owned by SC/ST* entrepreneurs in line with Public Procurement Policy for Micro and Small Enterprises (MSEs) order 2012 including subsequent amendment /notification/order (Indicate Yes/No) Note: Documentary evidence is to be attached. Please refer remarks at the end of the Attachment.
3 (c). If 3(b) is 'Yes', please mentiom whether you are (Proprietary MSE/ Partnership MSE/Private Limited Company) owned by SC/ST Entrepreneurs.
3 (d). Are you a MSE owned by a women in line with Public Procurment Policy for Micro and Small Enterprises (MSEs) order 2012, Public Procurment Policy for Micro & Small Enterprises (MSEs) Amendment Order 2018 including subsequent amendment / notification/order . (Indicate Yes/No)
4. Permanent Account (PAN) No.
5. GSTIN Numbers
I. GSTIN in the Sates/UT from where the supply of goods take place
Name of the States/UT GSTIN number
II. GSTIN in the States/UT where the supply for services take place (states where sites under the subject package is situated)
Name of the States/UT GSTIN number
6. PF Registration No. of the Company
7. PF Regional Office covered (with Address)
8. Name of Contact Person
9. Contact Details
10. Bank Details for Electronic Payment
Name of the Bank:
Address of Branch:
Type of Account:
Type of Account: Current Account
11. 9 digit MICR code printed at bottom in middle, next to cheque no.
12. IFSC (for RTGS)/NEFT Code (to be obtained from the Bank) Sample Cancelled Cheque to be enclosed
We hereby declare that the above information are true and correct and we agree that the payment on account of this Contract, in the event of award, be made in the above account maintained in the above mentioned Bank.
*The definition of MSEs owned by SC/ST is as given under:
a. In case of proprietary MSE, proprietor(s) shall be SC /ST.
b. In case of partnership MSE, the SC/ST partners shall be holding at least 51% shares in the unit.
c. In case of Private Limited companies, at least 51% share shall be held by SC/ST promoters.
Documentary evidence: Please provide scanned copy(ies) of the SC/ST certificate(s) issued by District Authority as applicable for SC/ST MSE category as per (a), (b) or (c) above.
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-CIVIL/DOM/I00/23/02605 (Rfx No. 5002002740) Attachment-16
Construction of residential quarters at Bikaner (Rajasthan)
(Additional Information)
Bidder’s Name and Address (Sole Bidder) : To:
Contracts & Materials dept.
Name : Power Grid Corporation of India Ltd.,
Address : Northern Region–I, Regional Headquarter,
SCO Bay No. 5 to 10, Sector 16A,
Faridabad-121002, Haryana
In support of the additional information required as per ITB Sub-Clause 9.3 (p) of the Bidding Documents, we furnish herewith our data/details/documents etc., alongwith other information, as follows (the stipulations have been reproduced in italics for ready reference):
1.0 The Bidder shall furnish
A certificate from their Banker(s) (as per prescribed formats in Form 16, Section-VI: Sample Forms and Procedures) indicating various fund based/non fund based limits sanctioned to the Bidder and the extent of utilization as on date. Such certificate should have been issued not earlier than three months prior to the date of bid opening. Wherever necessary the Employer may make queries with the Bidders’ Bankers. [Reference ITB clause 9.3(p)(i)]
1.1 In accordance with 1.0, certificate(s) from banker as per requisite format, indicating various fund based/non fund based limits sanctioned to the bidder or each member of the joint venture and the extent of utilization as on date is/are enclosed, as per the following details:
Name of the Bidder (Sole Bidder)
Name of the Banker by whom certificate issued
Date of certificate (should not be earlier than 3 months prior to date of bid opening)
Whether fund based/non fund based limits are indicated in the certificate
Whether extent of utilization is indicated in the certificate
1.2 The Bidder should accordingly also provide the following information/documents
(i) Details of Banker:
Address of Banker
Contact Name and Title
(ii) As per para 1.0, Authorization Letter(s) from the bidder (in case of JV bidder, from all the partners) addressed to the Banker(s), authorizing POWERGRID to seek queries about the bidder with the Banker(s) and advising the Banker(s) to reply the same promptly, is/are enclosed as per following details:
Sl. No. Letter Ref. Date Addressed to (name of the Bank)
2.0 Litigation History
The bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the last five years. A consistent history of awards involving litigation against the Bidder or any partner of JV may result in rejection of Bid. [Reference ITB clause 9.3(p)(ii)]
2.1 Details of litigation history resulting from Contracts completed or under execution by the bidder over the last five years
Year Name of client, cause of litigation/arbitration and matter in dispute Details of Contract and date Award for or against the bidder Disputed amount
3.0 Details regarding previous transgressions of Integrity Pact
The bidder should provide detailed information on any transgression of Integrity Pact that occurred in the last 10 years with any other Public Sector Undertaking or Government Department or any other Company, in any country.
3.1 Details regarding previous transgressions of Integrity Pact that occurred in the last 10 years
Year Name of client Details of Transgression of Integrity Pact by the bidder
4.0 OTHER INFORMATION
4.1 Current Contract Commitments of works in progress
Bidders (individual firms or each partners of JV) should provide information on their current commitments on all contracts that have been awarded, or for which a letter of intent or acceptance has been received, or for contracts approaching completion, but for which an unqualified, full completion certificate has yet to be issued.
Details of Contract Value of outstanding work (Rs.) Estimated completion date
4.2 Financial Data:
Details Actual (Previous five years) Projection for next five years
Total Liability
Current Liability
Profit before taxes
Profit after taxes
5.0 Details of Provident Fund Code Number of the Bidder [ref. ITB9.3(q)]
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-CIVIL/DOM/I00/23/02605 (Rfx No. 5002002740) Attachment-17
Construction of residential quarters at Bikaner (Rajasthan)
(Declaration for tax exemptions, reductions, allowances or benefits)
Bidder’s Name and Address (Sole Bidder) : To:
Contracts & Materials dept.
Name : Power Grid Corporation of India Ltd.,
Address : Northern Region–I, Regional Headquarter,
SCO Bay No. 5 to 10, Sector 16A,
Faridabad-121002, Haryana
1 We confirm that we are solely responsible for obtaining following tax exemptions, reductions, allowances or benefits in respect of supplies under the subject package, in case of award. We further confirm that we have considered the same in our bid thereby passing on the benefit to POWERGRID while quoting our prices. In case of our failure to receive such benefits, partly or fully, for any reason whatsoever, the Employer will not compensate us.
2 We are furnishing the following information required by the Employer for issue of requisite certificate if and as permitted in terms of the applicable Govt. of India policies/procedures (in case of award):
Applicable Act, Notification No. and Clause Ref. No. Sl. No. Description of item on which applicable Country of origin Remarks, if any
(The requirements listed above are as per current Notification of Govt. of India indicated above. These may be modified, if necessary, in terms of the Notifications.)
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-CIVIL/DOM/I00/23/02605 (Rfx No. 5002002740) Attachment-17
Construction of residential quarters at Bikaner (Rajasthan)
(Information regarding Ex-employees of POWERGRID in our Organisation)
Name(s) and Addresse(s) of other partner(s) To:
Contracts & Materials dept.
Name : …… ……. …….. …… ……. …….. Power Grid Corporation of India Ltd.,
Address : …… ……. …….. …… ……. …….. Northern Region–I, Regional Headquarter,
…… ……. …….. …… ……. …….. SCO Bay No. 5 to 10, Sector 16A,
We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:
Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-CIVIL/DOM/I00/23/02605 (Rfx No. 5002002740) Attachment-17
Construction of residential quarters at Bikaner (Rajasthan)
(Information regarding Ex-employees of POWERGRID in our Organisation)
Name(s) and Addresse(s) of other partner(s) To:
Contracts & Materials dept.
Name : Power Grid Corporation of India Ltd.,
Address : Northern Region–I, Regional Headquarter,
SCO Bay No. 5 to 10, Sector 16A,
We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:
Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-CIVIL/DOM/I00/23/02605 (Rfx No. 5002002740) Attachment-18
Construction of residential quarters at Bikaner (Rajasthan)
Bidder’s Name and Address (Sole Bidder) : To:
Contracts & Materials dept.
Name : Power Grid Corporation of India Ltd.,
Address : Northern Region–I, Regional Headquarter,
SCO Bay No. 5 to 10, Sector 16A,
Faridabad-121002, Haryana
Safety Pact is attached herewith this Volume
Date : -- Printed Name :
Place : Designation :
Instruction for printing & submitting Safety Pact
1. The requisite format of Safety Pact is getting generated automatically and displayed here below.
2. Take print out of first page on a non-judicial stamp paper of Rs. 100/- and other six pages on plain A4 size paper. Such two sets shall be prepared by the bidder.
3. All the pages of both the copies of the Safety Pact shall be signed by the authorised representative of the bidder and duly stamped.
4. Both the original copies shall be submitted by the bidder in the form of Hard Copy as part of the first envelope before due date & time of submission of the bid.
5. For further details bidders may please refer ITB Clause 9.3 (s).
Between #REF! #REF!
Power Grid Corporation of India Limited #REF! #REF!
having its Registered Office at B-9, Qutab Institutional Area, Katwaria Sarai, New Delhi – 110016 hereinafter referred to as #REF! #REF!
"POWERGRID", #REF! #REF!
0 1 having its Registered Office at ,
having its Registered Office at ,, 1 AND
hereinafter referred to as
"The Bidder/Contractor"
POWERGRID intends to award, under laid-down organisational procedures, contract(s) for Construction of residential quarters at Bikaner (Rajasthan) Specification Number:NR1/NT/W-CIVIL/DOM/I00/23/02605 (Rfx No. 5002002740)
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)
Safety Pact Page 1 of 6
POWERGRID values full compliance with all relevant laws and regulations and the principles of Safety, Health& Environment in its relations with its Bidders/ Contractors.
In order to achieve these goals, POWERGRID and the above named Bidder / Contractor enter into this agreement called “Safety Pact” which will form part of the Bid.
It is hereby agreed by and between the parties as under:
Section I - Commitments of POWERGRID
POWERGRID commits itself to take all measures necessary to prevent accidents duringConstruction and Operation of the Transmission Assets and to observe the following:
1. POWERGRID recognizes and accepts its statutory responsibilities for ensuring construction, operation and maintenance of equipments and for the provision of safe methods of work and safe working conditions.
2. POWERGRID recognizes and accepts its statutory responsibilities for ensuring safety of not only its employees but also that of the Contracting Agencies as Principal Employer.
3. POWERGRID shall review the accidents in a structured manner and take necessary actions to ensure that the safety criteria are strengthened for safe construction as well as Operation & Maintenance of the Transmission Assets.
4. POWERGRID shall conduct necessary awareness and training programmes to its Employees to augment the various safety requirements to be followed during Construction and Operation & Maintenance of the Transmission Assets from time to time.
5. POWERGRID shall, from time to time, issue necessary guidelines,instructions and deterrents to its employees as well as to the Contracting Agencies, to update them to take necessary preventive measures to avoid repetition of similar accident attributes.
6. POWERGRID shall review and provide necessary guidanceto the Contracting Agencies, as and when, any abnormality / special situations are brought to its notice by the Contracting Agencies during execution of the Transmission Projects being executed by them.
7. POWERGRID shall conduct periodical surveillance site inspections / audits to identify the unsafe conditions and unsafe actions, and bring them to the knowledge of the Contracting Agencies for taking timely corrective actions.
8. POWERGRIDshall investigate all accidents, fatal as well as non-fatal, to identify the lapses, the reason for the accident / incident and suggest measures for prevention of recurrence of such accidents, and fix responsibility for the lapses leading to the accident.
9. POWERGRID shall augment the training to the workers and supervising personnel of the Contracting Agencies, as per schedules, upon nomination by the Contracting Agencies in reasonable time frame.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)
Safety Pact Page 2 of 6
10. POWERGRID shall exercise the right to claim and recover compensation from the Contracting Agencies in case of any violation of the safety requirements / provisions during execution of the Transmission Projects, as built in the applicable Laws and contractual specifications / guidelines in vogue / issued by POWERGRID from time to time.
Section II – Commitments of the Bidder / Contractor:
The Bidder / Contractor commits himself to take all measures necessary to prevent / minimise accidents at their construction / erection sites and to observe the following:
1. The Bidder / Contractor recognizes and acceptsthe statutory and comprehensive responsibility for ensuring safe construction and Testing & Commissioning in the Transmission Projects being executed by them by providing safe methods of work, working conditions and Tools & Plants for human safety.
2. The Bidder / Contractor recognizes and accepts the responsibilities for ensuring safety of not only their employees but also that of the Sub-contractors, Principal Employer and the general public during execution of the Transmission Projects / works.
3. The Bidder / Contractor shall review the accidents in a structured manner and take necessary actions to ensure that the safety criteria are strengthened for safe construction of the Transmission Assets.
4. The Bidder / Contractor shall endeavour continuous development of safe methods of work to ensure that the effect of risks and perils are minimised to the extent possible and implement the same at their worksites.
5. The Bidder / Contractor shall conduct periodical Training to their Employees as well as to that of their Sub-contractors for safety awareness during construction works being executed by them.
6. The Bidder / Contractor shall provide all requisite Tools & Plants required for the work and ensure their healthiness by periodical inspections / testing as required. Unhealthy and sub-standard Tools & Plants will be immediately removed from site as and when they are identified.
7. The Bidder / Contractor shall,at their cost, provide all necessary Personal Protective Equipments such as Double Lanyard Safety Belts, Appropriate Fall Arrest Systems, Safety Helmets, Foot Wear, Hand Gloves, etc., as required for various activities pertaining to execution of the Projects / works, confirming to relevant Indian Standards.
8. The Bidder / Contractor shall ensure that dedicated qualified Safety Officers are posted in the construction projects being executed by them and ensure that the Safety Officer visits each and every gang periodically and conducts audits / inspections to identify the unsafe conditions and unsafe actions, to be rectified by the site supervising personnel promptly.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)
Safety Pact Page 3 of 6
9. The Bidder / Contractor shall conduct appropriate medical checks-up for the workers before deploying them at their construction sites to ensure that only those who are medically fit are deployed in the Projects / works to be executed by them. The copy of the Medical Reports shall be provided by the Bidder / Contractor to POWERGRID, whenever requested by POWERGRID.
10. The Bidder / Contractor shall screen the workers before deploying them at their construction sites to ensure that only those with the skills, experience and competence to work at height and also medically fit for work at height are deployed for work at height in the Projects executed by them.
11. The Bidder / Contractor shall ensure daily before starting the work that their site Supervising Personnel / Safety Officer briefs the workers about the work for the day and the safety measures / precautions required to be taken by them.
12. The Bidder / Contractor shall investigate all the accidents at their working sites to ascertain the lapses leading to the incident and the precautionary / corrective measures required to be taken to avoid recurrence of such accidents. These accidents will be reviewed at the Board Management level of the Agencies and the findings / recommendations will be put up to POWERGRID Apex Safety Board within the stipulated period.
13. The Bidder / Contractor shall ensure that all accidents, whether fatal or non-fatal in nature, will be informed to POWERGRID, in writing, immediately on the occurrence of the same,and in any case, within not more than 24 hours of occurrence of the same.
14. The Bidder / Contractor shall ensure that in case of any accident, all necessary medical help / support shall be provided to the victims / injured till they are completely fit to return to work.
15. The Bidder / Contractor shall ensure that in case of fatal accidents, all statutory Authorities, including Police, concerned Labour Dept. Officials, concerned Workmen Compensation Commissioner, etc., will be intimated in writing as required by the statutory Law, and followed up for compliance of all statutory obligations. The Bidder / Contractor shall own full responsibility of timely accident reporting to various authorities, including POWERGRID.
16. The Bidder / Contractor shall ensure that in case of fatality or serious injury leading to permanent disablement of the victims, the compensation amount will be deposited with the concerned authorities, as required by the Laws, and followed up for early disbursement to the beneficiaries of the victims.
17. The Bidder / Contractor assures that they shall co-operate to the fullest extent for carrying out any investigation of the accidents at their work sites by POWERGRID to identify the lapses, the reason for the accident / incident and suggest measures for prevention of recurrence of such accidents. All factual details of the occurrence of the accident will be provided to POWERGRID, as and when required.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)
Safety Pact Page 4 of 6
18. The Bidder / Contractor assures that they take full responsibility of meeting the statutory obligations in case of accidents, and in case of any reference by any Statutory Body at a later date also, they shall provide all information to POWERGRID and meet all the statutory obligations, including payment of additional compensation, if any.
19. The Bidder / Contractor assures that in case of any inspection of their work site or Notice by any Statutory Authority, they shall comply promptly and inform POWERGRID Site Officials of the same, and also provide all necessary information and assistance for smooth compliance of the observations / instructions of such Authorities.
20. The Bidder / Contractor accepts the provisions regarding safety, including payment of any sums to POWERGRID, in case of any violation of the safety requirements / provisions during execution of the Transmission Projects, as built in the Contractual Conditions, Safety Planand the Safety Pact, and confirm to abide by the same.
Section III – Equal treatment to all Bidders / Contractors:
1. POWERGRID will enter into agreements with identical conditions as this one with all Bidders.
2. POWERGRID will disqualify, from the tender process, any bidder/ take punitive actions on the bidder, who does not sign this Pact or violate its provisions.
Section IV – Pact Duration:
This Pact begins when both parties have legally signed it. It expires for the successful Bidder / Contractor after closure of the contract and, for all other Bidders, after the contract has been awarded.
Section V – Other Provisions:
1. This agreement is subject to Indian Law. Place of performance and jurisdiction is the establishment of POWERGRID. The Arbitration clause provided in the main tender document / contract shall not be applicable for any issue / dispute arising under the Safety Pact.
2. Changes and supplements need to be made in writing, which shall come into force only upon mutual agreement / acceptance.
3. If the Contractor is a partnership firm or consortium of Joint Venture, this agreement must be signed by all partners, consortium members and Joint Venue partners, as applicable as per the Tender Specifications.
4. Nothing in this agreement shall affect the rights of the parties available under General Conditions of Contract (GCC) and Special Conditions of Contract (SCC).
5. Should one or several provisions of this agreement turn out to be invalid, the reminder of this agreement remains valid. In this case, the parties will strive to come to an agreement to their original intentions.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)
Safety Pact Page 5 of 6
Signature Signature
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)
(Office Seal) (Office Seal)
Designation : Designation :
Witness 1 : Witness 1 :
Designation : Designation :
Witness 2 : Witness 2 :
Designation : Designation :
Safety Pact Page 6 of 6
Specification No. :NR1/NT/W-CIVIL/DOM/I00/23/02605 (Rfx No. 5002002740) Attachment-19
Construction of residential quarters at Bikaner (Rajasthan)
Bidder’s Name and Address (Sole Bidder) : To:
Contracts & Materials dept.
Name : Power Grid Corporation of India Ltd.,
Address : Northern Region–I, Regional Headquarter,
SCO Bay No. 5 to 10, Sector 16A,
Faridabad-121002, Haryana
Further, we hereby confirm that except as mentioned in the Attachment – 6 (Alternative, Deviations and Exceptions to the Provisions) hereof forming part of our First Envelope :
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-CIVIL/DOM/I00/23/02605 (Rfx No. 5002002740) Bid Form 1st Envelope 1 one 1 st 1 January
2 two 2 nd 2 February
BID FORM (First Envelope) 3 three 3 rd 3 March
4 four 4 th 4 April
Bid Proposal Ref. No. 5 five 5 th 5 May
Date : -- 6 six 6 th #VALUE! 6 June
7 seven 7 th #VALUE! 7 July
To: 8 eight 8 th #VALUE! 8 August
Contracts & Materials dept. 9 nine 9 th #VALUE! 9 September
Power Grid Corporation of India Ltd., 10 ten 10 th 10 October
Northern Region–I, Regional Headquarter, 11 eleven 11 th 11 November
SCO Bay No. 5 to 10, Sector 16A, 12 twelve 12 th 12 December
Faridabad-121002, Haryana 13 thirteen 13 th
14 fourteen 14 th
Name of Contract : Construction of residential quarters at Bikaner (Rajasthan) 15 fifteen 15 th
Dear Ladies and/or Gentlemen, Enter details here. 16 sixteen 16 th
1.0 Having examined the Bidding Documents, including Amendment Nos. dated 00/01/1900 the receipt of which is hereby acknowledged, we the undersigned, offer to design, manufacture, test, deliver, install and commission (including carrying out Trial operation, Performance & Guarantee Test as per the provision of Technical Specification) the Facilities under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 9.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in two envelopes i.e. First Envelope – Techno – Commercial Part & Second Envelope - Price Part (to be opened subsequently). the receipt of which is hereby acknowledged, we the undersigned, offer to design, manufacture, test, deliver, install and commission (including carrying out Trial operation, Performance & Guarantee Test as per the provision of Technical Specification) the Facilities under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 9.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in two envelopes i.e. First Envelope – Techno – Commercial Part & Second Envelope - Price Part (to be opened subsequently). 17 seventeen 17 th
1.1 We meet the eligibility requirements and have no conflict of interest in accordance with ITB Clause 2.
2.0 Attachments to the Bid Form (First Envelope) Bank Draft 18 eighteen 18 th
In line with the requirement of the Bidding Documents, we enclose herewith the following Attachments: Pay Order 19 nineteen 19 th
(a) Attachment 1 : Not Applicable Banks certified Cheque Zero 20 twenty 20 th
Or Online Payment Acknowledgement towards Bid Security for a sum of INR
Or documentary evidence in support of exemption of Bid Security, in separate envelope in accordance with clause 13.1 of ITB, Section-II
(b) Attachment 2: A power of attorney duly authorized by a Notary Public indicating that the person(s) signing the bid have the authority to sign the bid and thus that the bid is binding upon us during the full period of its validity in accordance with the ITB Clause 14. Bank Guarantee (0) 21 st
(c) Attachment 3 : The documentary evidence that we are eligible to bid in accordance with ITB Clause 2. Further, in terms of ITB Clause 9.3 (c) & (e), the qualification data has been furnished as per your format enclosed with the bidding documents Attachment-3(QR). 22 th
Further, the required Joint Venture Agreement signed by us and our Partners has also been furnished as per your format Attachment-3(JV). #REF! Applicable 23 th
Further the required deed of Joint Undertaking signed by us and Tower Manufacturer has also been furnished as per your format. 0 #REF! Not Applicable 24 th
(d) Attachment 4 : The documentary evidence establishing in accordance with ITB Clause 3, Vol.-I of the Bidding Documents that the facilities offered by us are eligible facilities and conform to the Bidding Documents has been furnished as Attachment 4. A list of Special Tools & Tackles to be used by us for erection, testing & Commissioning and to be handed over to Employer, the cost of which is included is our Bid Price, is also enclosed as per your format as Attachment 4A. A list of Special Tools & Tackles to be brought by the contractor for erection, testing & Commissioning and to be taken back after completion of work, whose cost in not included in our bid price, is enclosed as per your format as Attachment 4B. 25 th
(e) Attachment 5 : The details of all major items of services or supply which we propose subletting in case of award, giving details of the name and nationality of the proposed subcontractor/sub-vendor for each item. 26 th
(f) Attachment 5A : Items, Components, Raw Material, Services proposed to be sourced from Micro and Small Enterprises
(g) Attachment 6 : The variation and deviations from the requirements of the Conditions of Contract, Technical Specification and Drawings (excluding critical provisions as mentioned at clause 6.0 below) in your format enclosed with the Bidding Documents, including, inter alia, the cost of withdrawal of the variations and deviations indicated therein. 27 th
(h) Attachment 7 : The details of Alternative Bids made by us indicating the complete Technical Specifications and the deviation to contractual and commercial conditions. (Not Applicable) 28 th
(i) Attachment 8 : Manufacturer’s Authorisation Forms. 29 th
(j) Attachment 9 : Work Completion Schedule. 30 th
(k) Attachment 10 : Guarantee Declaration. 31 st
(l) Attachment 11 : Information regarding ex-employees of Employer in our firm.
(m) Attachment 12 : Filled up information regarding Price Adjustment Data as per the format enclosed in the bidding documents.
(n) Attachment 13 : Declaration regarding Social Accountability.
(o) Attachment 14 : Integrity Pact, in a separate envelope, duly signed on each page by the person signing the bid.
(p) Attachment 15 : Option for Initial Advance (either Interest Bearing Initial Advance or No Initial Advance) and Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise
(q) Attachment 16 : Additional Information.
(r) Attachment 17 : Declaration for tax exemptions, reductions, allowances or benefits
(s) Attachment 18 : Declaration
(t) Attachment 19 : Declaration of Key Managerial Person jointly with Power of Attorney holder
(u) Attachment 20 : Affidavit
(v) Attachment 21: Declaration by the Bidder regarding events encountered pursuant to ITB Clause 2.1
(w) Attachment 22: Certification by the Bidder per DoE Order in line with ITB Clause 2.1
(x) Attachment 23: Affidavit of Self certification regarding Minimum Local Content in line with PPP-MII order and MoP Order, if applicable
(y) Attachment 24: Certificate from statutory auditor or cost auditor of the company (in the case of companies) or from a practicing cost accountant or practicing chartered accountant (in respect of suppliers other than companies) giving the percentage of Local Content, in line with PPP-MII order and MoP Order, if applicable
(z) Attachment 25: Bid Securing Declaration
3.0 We are aware that, in line with Clause No. 27.1 (ITB), our Second Envelope (Price Part) is liable to be rejected in case the same contains any deviation/omission from the contractual and commercial conditions and technical Specifications other than those identified in this First Envelope.
4.0 We confirm that except as otherwise specifically provided our Bid Prices in Second Envelope include all taxes, duties, levies and charges as may be assessed on us, our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Facilities, in and outside of India.
4.1 100% of applicable Taxes and Duties i.e. GST, which are payable by the Employer under the Contract, shall be reimbursed by the Employer on production of satisfactory documentary evidence by the Contractor in accordance with the provisions of the Bidding Documents.
4.3 We confirm that we have also registered/we shall also get registered in the GST Network with a GSTIN, in all the states where the project is located and the states from which we shall make our supply of goods.
5.0 Construction of the Contract
5.1 We declare that we have studied Clause GCC 2.1 relating to mode of contracting for Domestic Bidders and we are making this proposal with a stipulation that you shall award us two separate Contracts viz ‘First Contract’ for ex-works supply of all equipment and materials including mandatory spares and ‘Second Contract’ for providing all the services i.e. inland transportation for delivery at site, In-transit insurance, unloading, handling at site, installation, testing and commissioning including Trial operation in respect of all the equipment supplied under the ‘First Contract’ and other services specified in the Contract Documents. We declare that the award of two contracts, will not, in any way, dilute our responsibility for successful operation of plant/equipment and fulfillment of all obligations as per Bidding Documents and that both the Contracts will have a cross-fall breach clause i.e. a breach in one Contract will automatically be classified as a breach of the other contract which will confer on you the right to terminate the other contract at our risk and cost.
6.0 We have read the provisions of following clauses and confirm that the specified stipulations of these clauses are acceptable to us:
(a) GCC 2.14 Governing Law
(b) GCC 5 Contractor’s Responsibilities
(c) GCC 8 Terms of Payment
(d) GCC 9.3 Performance Security
(e) GCC 10 Taxes and Duties
(f) GCC 21.2 Completion Time Guarantee
(g) GCC 22 Defect Liability
(h) GCC 23 Functional Guarantee
(i) GCC 25 Patent Indemnity
(j) GCC 26 Limitation of Liability
(k) GCC 38 Settlement of Disputes
(l) GCC 39 Arbitration
(m) Appendix 2 to Form of Contract Agreement Price Adjustment
Further we understand that deviation taken in any of the above clauses by us may make our bid non-responsive as per provision of bidding documents and be rejected by you.
7.0 We undertake, if our bid is accepted, to commence the work immediately upon your Notification of Award to us, and to achieve the delivery of goods and related services within the time stated in the Bidding Documents.
8.0 If our bid is accepted, we undertake to provide a Performance Security in the form and amounts, and within the times specified in the Bidding Documents.
9.0 We agree to abide by this bid for a period of six (06) months from the date fixed for opening of bids as stipulated in the Bidding Documents, and it shall remain binding upon us and may be accepted by you at any time before the expiration of that period.
10.0 Until a formal Contract is prepared and executed between us, this bid, together with your written acceptance thereof in the form of your Notification of Award shall constitute a binding contract between us.
11.0 We understand that you are not bound to accept the lowest or any bid you may receive.
12.0 # (For Joint Venture only) We, the partners of Joint Venture submitting this bid, do agree and confirm that in case of Award of Contract on the Joint Venture, we shall be jointly and severally liable and responsible for the execution of the Contract in accordance with Contract terms and conditions. 2
13.0 We are a Micro and Small Enterprise (MSE) registered with , a designated Authority of GoI under the Public Procurement Policy for MSEs order 2012, Notification dated 01/06/2020 read in conjuction with related notifications issued from time to time for such enterprises. 2
14.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.
Thanking you, we remain,
Yours faithfully,
For and on behalf of
Date : -- Printed Name :
Place : Designation :
In case of bid from a Joint Venture, name & designation of representative of JV partner is to be provided and Bid Form is also to be signed by him
#REF! Printed Name :
#REF! Designation :
Please provide additional information of the Bidder
Business Address :
Country of Incorporation :
State/Province to be indicated :
Name of Principal Officer :
Address of Principal Officer :
23 Twenty Three
27 Twenty Seven
28 Twenty Eight
33 Thirty Three
37 Thirty Seven
38 Thirty Eight
73 Seventy Three
74 Seventy Four
75 Seventy Five
77 Seventy Seven
78 Seventy Eight
79 Seventy Nine
83 Eighty Three
87 Eighty Seven
88 Eighty Eight
93 Ninety Three
97 Ninety Seven
98 Ninety Eight
100 One Hundred
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html
Price_Schedule.xlsx
xlsx • 0.13 MB
02-Attachment-3-Bidder Eligibility.doc
doc • 0.04 MB
03_Attachment-8- Manufacturers Authorization Form.DOC
doc • 0.06 MB
04-Attachment 14-Integrity Pact.doc
doc • 0.07 MB
05-Attachment 18-Safety Pact.docx
docx • 0.05 MB
06_Attachment 19-KMP Declaration.doc
doc • 0.03 MB
07_Attachment 20-Affidavit.docx
docx • 0.02 MB
08_Attachment 21 Declaration regading event encountered.docx
docx • 0.03 MB
09_Attachment 22 Certificate by bidder.docx
docx • 0.02 MB
10_Attachment 23_Affidavit for self-certification_PPP - MII Order.docx
docx • 0.02 MB
11_Attachment 24_Certificate by Auditor_PPP - MII Order.docx
docx • 0.02 MB
12_Attachment 25_Compliance to the process related to the e-RA.docx
docx • 0.02 MB
13_Attachment-26 Bid Securing Declaration.docx
docx • 0.03 MB
14_Legends for Units.pdf
pdf • 0.03 MB
First Envelope and Bid Forms.xlsx
xlsx • 1.35 MB
01-Section - I IFB SSTE Vol-I.docx
docx • 0.04 MB
02 Section - II ITB SSTE civil(Feb 2019).docx
docx • 0.09 MB
03-Section - III_BDS.docx
docx • 0.07 MB
04_1-Annexure-A (BDS).docx
docx • 0.02 MB
04_2_Annexure-B(BDS).docx
docx • 0.02 MB
04_3_Annexure-C(BDS).docx
docx • 0.03 MB
05-GCC-civil works(Feb 2019).doc
doc • 0.37 MB
06-Section - V SCC Civil Vol-I.docx
docx • 0.06 MB
07-Appendix-I to SCC.pdf
pdf • 0.22 MB
08-Section - VI Forms and Proceedures Civil.docx
docx • 0.15 MB
09-Checklist for submission of tender.docx
docx • 0.02 MB
List of indicative make.doc
doc • 0.17 MB
Scope of work.docx
docx • 0.02 MB
SFQP.pdf
pdf • 2.19 MB
Site plan.pdf
pdf • 0.44 MB
TS Civil.doc
doc • 0.08 MB
TS CSS 11kV RMU.pdf
pdf • 0.53 MB
TS for dry type xmer.pdf
pdf • 0.26 MB
01 Clarification_Extn_letter_1.pdf
pdf • 0.16 MB
~$lar ts modified.docx
docx • 0.00 MB
Errata-1.pdf
pdf • 0.06 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .