Construction of PHC Building at Bhambhara, Block Sam, District Jaisalmer (Risk and Cost)

( Based on BSR Civil Works 24th May, 2018 ,Jaisalmer District) PHC Building (Part A :- Civil Work) Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils

Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth , consolidating each deposited layer by ramming and watering including lead upto 50Mtr. and lift upto 1.5Mtr.

Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering =All up to plinth level 1:4:8 (1Cement :4 Course Sand :8 Graded stone aggregate 40 mm nominal size (Crusher Broken)

Providing and laying in position specified grade of reinforced cement concrete including curing compaction finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. All work up to plinth level : 1:1.5:3 (1-Cement:1.5 coarse sand:3-graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good the joints excluding cost of centering shuttering and reinforcement : 1:1.5:3 (1-Cement:1.5 coarse sand:3-graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs, girders having slopes up to 15o , landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases, up to floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good and joints excluding the cost of centering, shuttering and reinforcement: 1:1.5:3 (1-Cement:1.5 coarse sand:3-graded stone aggregate 20 mm nominal size).

Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways and removal of formwork for foundations in basements rafts, footings, strap beams, bases of columns , etc. up to plinth level.

Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways with wooden members and removal of formwork for superstructure up to 4.5 mtr above plinth, for: (a) Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands , coping, bed plates, anchor blocks, sills, chhajjas lintel, beam etc.

--do-- (b) Columns, pillars, posts and struts etc.

Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level. Tremo Mechanically treated bars

Brick masonary in foundation and plinth with bricks of class designation 75 mm in :Cement Mortar 1:6 (1-Cement:6-coarse sand). Add extra over item No. 5.1 for brick work in superstructure up to third storey.

Providing and fixing precast R.C.C. slab mix 1:2:4 (1-Cement:2-sand:4-stone aggregate 12.5 mm nominal size) as per design up to 30 mm thick for shelves etc. including cost of reinforcement consisting of wire mesh 100x100x4mm with fine finish.

Half brick masonry in foundation & Plinth using bricks of designation 75 with nominal hoop reinforced (2 Nos. 6mm MS bar) at every fourth course in for hoop reinforcement 1Sqm. 6mm MS bar. Cement mortar 1:4 (1-Cement:4-coarse sand). Add extra for half brick masonary in superstructure up to third story.

Half brick masonry in foundation & plinth using bricks of designation 75 with nominal hoop rainforsed (2 Nos. 6mm MS bar) at every fourth course in for hoop rainforcement 1Sqm. 6mm MS bar 2x2x1.00 = 4.00 Cement mortar 1:6 (1- Cement:6-coarse sand). Add extra over item No. 5.8 for half brick masonary in superstructure up to third story.

Brick work in partition in super structure up to third storey 7 Cm. thick (brick on edges) using bricks of class designation 75 with nominal hoop rainforcement (2 Nos 6mm MS bar) at every fourth course in. Cement mortar 1:4 (1-Cement:4- coarse sand).

Random Rubble stone masonary for foundation and plinth in Cement Sand Mortar above 30 Cm. thick wall in : Cement Mortar 1:6 (1-Cement:6- Sand).

Random Rubble stone masonary for superstructure above plinth level one storey height above 30 Cm. thick walls in : Cement Mortar 1:6 (1-Cement:6-Sand).

Random Rubble stone masonary for superstructure above plinth level one storey height above 30 Cm. thick walls IS 1597 (Part I) 1992 in : Cement Mortar 1:6 (1-Cement:6-Sand). Extra for Pillar masonry including bed plates as per specifications. Bed plate to be paid separately.

Extra for Pillar masonry including bed plates as per specifications. Bed plate to be paid separately.

Extra for facing as per design and detailed specifications including additional cost of stones over item No. 6.1 & 6.2 for : Course rubble facing Second Sort.

Supplying and fixing machine cut and polished stone shelves, tands and sills in CM 1:3 with machine cut edges: Kota stone 25 to 30 mm thick.

Supplying and fixing Soorsagar Bhura or Equivalent ashlar sills, lintels and dassa, bearing, bed & top surface made perfenctly even, jambs, skirting steps etc. rough dressed: Upto 15 cm. thick

Marble stone flooring table rubbed, 18-20 mm thick over 20 mm (Av.) thick base of CM 1:4 (1- Cement:4-coarse sand) jointing with white cement mortar 1:2 (1-White cement:2-marble dust) with pigment to match the shade of the marble slab including grinding rubbing and polishing complete. IS 1130-1969 GREEN MARBLE Kesriaji (Rikhabdeo). Above 3601 Cm2

Marble stone flooring table rubbed, 18-20 mm thick over 20 mm (Av.) thick base of CM 1:4 (1- Cement:4-coarse sand) jointing with white cement mortar 1:2 (1-White cement:2-marble dust) with pigment to match the shade of the marble slab including grinding rubbing and polishing complete. (B) Rajnagar 2nd quality with light spots and streaks. Size upto 1501 to 3600 Cm2

Providing and fixing Ist quality standard White Ivory Glazed Tiles ISI marked [IS:13753] of size 300mm x 200mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster). (A) Category-I

Providing and fixing Ist quality MAT finished ceremic tile size 300x300mm confirming to IS : 13753 colour such as white, grey, ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slsurry including nicely finished joints using water proof joint filler power (Untile or Roffe make) and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster). Add extra over item No. 7.3, 7.4, & 7.5 for floor work due to extra cost of cement mortar 1:4 (1-Cement:4- fine sand) 20 mm thick.

Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal, dehydreresin in glue both sides with approved steel fittings complete as per Annexure ‘A’ Commercial Veneer both side. 35 mm thick shutter

Add extra for Flush doors For Internal teak wood lipping in 25mm depth in single leaf.

P&F to existing door frame 24mm thick factory made PVC door shutter made of styles and rails of a UPVC hollow section of size 59x24mm and wall thickness 2mm +0.2mm with inbuilt edging on both sides. The styles and rails mitred and jointed at the corners by menas of M.S. galvanised/ plastic brackets of size 75x220mm having wall thickness 1.0mm and stainless of size screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20mm and 1mm+0.1mm wall thickness. The lock rail made upto of `H' section, a UPVC hollow section of size 100x24mm and 2mm +0.2mm wall thickness fixed to the shutter style by means of plastic / galvanised M.S. `U' Cloats. The shutter frame filled with a UPVC multi-chambered single panel of size not less than 620mm, having overall thickness of 20mm and 1mm+ 0.1mm wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6mm galvanised MS roudn and fastened with nuts and washers, complete as per manufacturer's specifications and direction of Engineer in charge incl. all door, fittings, such as hingles, L-drop, handles, locking bolts etc. as per approval of Engineer in charge 24mm thick shutter.

Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee- sections, joints mitred and welded with 15x3 mm lugs 10 Cm. long embedded in cement concrete blocks 15x10x10 Cm. of 1:3:6 (1-Cement:3- coarse sand:6-graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.

Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20x10x2mm and brackets with flat iron diagonals 20x5mm, size with top and bottom rail of T-iron 40x40x6mm, with 40 mm dia steel pulleys / ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension). With 75 mm opening when closed.

Providing & fixing ms sheet single leaf door shutters in angle iron frame 35x35x5 mm suitablly diagonally braced with 25x3mm flat ironabove and below lock rail of size 50x5 mm beading extra includingall fittings, as per direction of engg. incharge but excluding coes of chokhats including two coats of anti corrastie red oxide primer panit. MS sheet 20 SWG

Supply & fixing of steel window made out 100x40 mm hollow metal pressed section of 16 gauge thick sheet partly openable and partly fixed panel shutter with 5 mm thick plain glass panes outside openable and wire gauge 14x24 gauge inside openable shutter with M.S. square bar 10 mm side, fixed, portion of window should be glazed by 5 mm thick plain glass of TG welded to M.S. frame and approved make putty with glazing clips inching joints mitred and plug welded with suitable hinges hold fast steel lug and screws with approved oxidized steel handles fittings peg stays etc. complete in all respect including providing 10 mm square MS bars 15 cm. center to cernter and applying priming coat of red oxide paints as per approved drawing by Engineer's incharge ground floor/ first floor. Size of Window 5'-6"x6' = 33.00 Sqft. or 3.07 Sqm. Hollow metal pressed section (75x40 mm) of 16 gauge.

Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance.

Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design.

Providing and laying 20 to 25 mm size glazed tiles pieces for rooof treatment having colour and shade as approved by the Engineer incharge over 25 mm thick layer of cement mortar mix 1:4 with application of cement slurry including finishing of joints with ordinary cement and curing etc. complete in all respect. Washing with acid.

Cement concrete flooring grade 1:2:4 (1- Cement:2-Coarse sand:4-graded stone aggregate) rounding off edges etc. but excluding the cost of nosing of steps etc. complete : 50 mm thick with 20 mm thick nominal size aggregate.

Cement concrete flooring grade 1:2:4 (1- Cement:2-Coarse sand:4-graded stone aggregate) rounding off edges etc. but excluding the cost of nosing of steps etc. complete IS 2571- 1970 : 75 mm thick with 20 mm thick nominal size aggregate.

Providing and laying Chequerred plain cement concrete embossed specially manufactured non- slipping tiles of approved make 20 mm thick laid on 20 mm thick bed of cement mortar 1:6 jointed with neat cement slurry complete.

Polished Blue Kota Stone flooring skirting, laid over 20 mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete : For area of each slab up to 901 to 2000 Sq. Cm : (A) 25 mm thick slab.

Polished Blue Kota Stone flooring skirting, laid over 20 mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete : For area of each slab up to 900 Sq. Cm : (A) 25 mm thick slab.

Polished Blue Kota Stone slab in steps, walls, pillars having fine machine cut edges laid on 12mm (Av.) thick cement mortar 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete : 25 mm thick slab area upto 901 to 2000 Sq.Cm.

Providing & laying vitrified Porcelain dianomite floor tile, skirting, dedo, (Johnson, Euro, Naveen, Bell or equivalent etc.) size 600x600, 10 mm thick flooring over 20 mm thick bed mortar 1:4 mix with 2-3 mm thick joint to be filled with cementious grout or polymer based non shrink grout make Rofee/ Bell adhesive/ pidite etc of matching colour as per requirement of site.

Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 20 mm thick.

Making grooves as per design in plaster 10mm to 20mm wide.

Pointing on stone masonary in cement sand mortar 1:3 (1-Cement:3-Sand) : Flush or ruled pointing.

Pointing on stone masonary in cement sand mortar 1:3 (1-Cement:3-Sand) : Deep grooved pointing.

Painting with enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.

Grading roof water proofing treatment with : Cement concrete 1:2:4 (1-Cement:2-coarse sand :4-graded stone aggregate 20mm nominal size).

Painting with weather coat paint (Asin paint/ I.C.I./Berger or eq. ISI make paint) two or more coat to give an even shade on new work.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work including preparation of base with primer, putty, lippy complete in all respect.

Providing & fixing anodizing alumium work (Anodizing to be got done from approved Anodizer) for doors, windows, ventilators and partition with extruded built up standard tubular and other sections of approved make confirming to IS : 733 and IS : 1285 anodised transparent 81 dyed to required shade according to IS : 1868 (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gas at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required inlcuding cleat angle Aluminum snap beading for glazing/paneling, C.P. Brass/ Stainless Steel screws, Al. Tower bolt & Al. handle & Al. Aldrop etc. all complete as per architectural drawings and the directions of Engineer-in charge. (Glazing and peneling to be paid for separately). (a) For Fixed portion

--do-- (b) For shutters of doors, windows & ventilators incl. providing and fixing hinges/ rollers etc. and making provision for fixing of fittings wherever reqd. (lockes shall be paid for separately).

Providing and Fixing 12mm thick prelaminated three layer medium density (exterior grade) particle bonded formaldehyde synthetic resin of approved brand and manufacture in paneling fixed in aluminium doors, windows/ stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge. Pre laminated particle board with decorative lamination on one side and balancing lamination on other side.

Providing and fixing glazing in aluminium door, window, vintilator shutters and partitions etc. with PVS/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost. of aluminium snap beading shall be paid in basic item.) with glass panes of 5.0mm thickness (weight not less than 13.75 Kg/Sqm) as per IS : 2835

P&F double action hydraulic floor spring of approved brand and manufacture to aluminium door shutter confirming to IS : 6315 incl. costof cutting floors as reqd. embedding in floor and cover plate etc. complte as per direction of Engineer in charge.

P&F expanded grill made of anodised aluminium as per desing and drawing having members section of size 7.5mm x 6.0mm and opening of size 102mm x 99mm to aluminium window/ vent with reqd. screws, Y and H aluminium sec (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of engineer in charge.

Providing and fixing brass lock without handle for aluminium door, or approved quality, make & design as directed by Engineer incharge

Providing and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide.

Supply & fixing steel shutter (Almirah type) with 18 gauge steel border & steel shutter including locking arrangement and painting etc. complete fixed on wall with joint fast (iron clip)

Supply & fixing of stainless steel pipe railing for ramp railing height, 90 cm. with 40 mm dia stainless steel pipe with 18 gauge with drop (vertical post) at 90 cm. C/C and intermidiate horizontal pipe with suitable height of same size and gauge with coupling, grinding and polishing & fix of master pieces as per required point as per approved design of Engineer incharge.

Providing and fixing Granite stone slab mirror polished and machine edge cut in Walls, Pillars, Steps, Shelves, Sills, Counters. Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 jointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with pigment to match the shade of the marble slab complete including grinding, rubbing and polishing of: Green/Black/Other granite Size above 3600 Cm2

Add extra for Flush doors For Internal teak wood lipping in 25 mm depth in Double leaf.

Add extra for Flush doors For double leaf shutter

Providing and fixing pressed steel mitred door frames manufactured from commercial mild steel sheet of 1.25 mm (16 gauge) thickness including hinges jamb, lock jamb, head and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25 mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge. Profile 'C'

Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete

Earth work in surface excavation not exceeding 30 Cm. In depth but exceeding 1.5 meter in width as well as 10 Sam. on plan including disposal of excavated earth up to 50 Mtr. And lift up to 1.5 Mtr. Disposed soil to be leveled and neatly dressed : All kinds of soil.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete

PHC Building (Part B :- Sanitary Work) P & F Indian type white glazed vitreous china Ist quality W.C. orissa pan (IS:2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor : Size Size 580x440 mm.

P & F European type white glazed vitreous china Ist quality W.C. pan (IS:2556 Mark) with P or S trap including cutting and making good the wall and floor.

P & F water closet Seat Covers with brass hinges complete IS 2548-1996: Solid PVC (ISI marked) grade-I White for EWC.

P & F Low level Flushing Cistern of 10 litres capacity (IS:2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS:1703 mark) complete including cutting and making good the wall : PVC with PVC bend as per IS : 7231

P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 25 mm G.I. waste pipe complete including cutting & making good the wall : Size 550mm x 400mm

P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 25 mm G.I. waste pipe complete including cutting & making good the wall : Size 550 mm x 400 mm dia for counter top.

P & F kitchen & Lab Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up to floor level complete including cutting and making good the wall & floor IS-771 (Part-II) 1985 : 1.0mm thick salem stainless steel AISI -304 kitchen sink of approved make (Nirali, Neel- Kanth, Jaina, Faber, Cryistal) with large waste coupling. Size 22x18x7 20x16x7

P & F kitchen & Lab Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up to floor level complete including cutting and making good the wall & floor IS-771 (Part-II) 1985 : Fire clay glazed kitchen sink (IS marked) size 600x450x200mm.

P&F Beveled edge mirror of special glass of appd make (Atul/equivalent) complet with 6mm thick asbestos cement sheet ground fixed to wooden scrwes & washers. Size 600 x 450mm x 4mm thick

P&F towel rail or ring of approved quality /make: C.P. brass Towel rail elbow type with concealed screws size 600mm (heavy duty)

P & F G.I. Pipes (Internal work) with G.I. fittings (IS:1239 Mark) & M.S. clamps including cutting and making good the walls and floors : B Class (A) Exposed on wall (i) 15 mm dia nominal bore.

(ii) 25 mm dia nominal bore.

(B) Concealed pipe in wall incl. with anticorrosive bitumen paint. (i) 15mm dia nominal bore.

P & F G.I. Pipes (External work) with G.I. fittings (IS:1239 Mark) including trenching & refilling earth etc. "B" Class a) 15mm dia nominal bore.

b) 25 mm dia nominal bore.

P & F Pillar Cocks (IS:8934 Mark) of superior quality and approved make : C.P. Pillar cock, high neck, 15 mm nominal bore.

P & F Bib Cock (IS:8931 Mark) Superior quality of approved make : Brass 400 gm. (a)15 mm nominal bore.

P & F Bib Cock (IS:8931 Mark) Superior quality of approved make : (a) C.P. Brass bib cock 15 mm nominal bore.

C.P. Brass Swan-neck 15 mm nominal bore.

--do-- (b) Long body, 15 mm nominal bore weight not less than 690 gm.

--do-- (c) Elbow action, 15mm nominal bore.

P & F 15 mm. Dia Connection pipe of approved quality/make: PVC pipe with C.P. Brass nuts up to length 450 mm.

P & F Flush Cock/Flush Valve (IS:9758 Mark) or WC of approved quality make : Brass / Gun metal Half-turn wt. 1 Kg. of approved quality / make, 25 mm nominal bore.

P & F Full-way valve (IS:778 Mark) or wheel valve of approved make : Gun-metal a) 15mm nominal bore

b) 25mm nominal bore

P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design. a) 500 litres capacity.

P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design. a) 300 litres capacity.

Hoisting Charges for each floor : 500 & 300 litres capacity.

P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design. a) 1000 litres capacity.

Hoisting Charges for each floor : 1000 litres capacity.

Providing Laying & jointing glazed S.W. pipes grade `A` (IS;651 marked) of approved make with spun yarn & stiff mixture of cement mortar 1.1 excavation & refilling of earth in all types of soil upto 1.2m depth, S.W. fittings, including testing of joints etc, complete. 150mm dia

Providing & Laying C.C. 1:5:10 (Stone aggregate 40 mm nominal size) upto haunches of S.W. pipes including 150 mm thick bed concrete as per Rajasthan P.W.D. specifications (Width W=Dia of pipe in Cm+40Cm.) concrete width to be reduced from width W at center of pipe to '0' at top of pipe (Excluding cost of pipe). 150mm dia S.W. Pipe.

Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipes type `B' for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make. a) Nahni Trap with Jali 4" 110mm dia

--do-- (b) Pipe Clip 110mm dia

--do-- (c) Bend 45 Dg. 110 mm dia

--do-- (d) Vent Cowel 110mm dia

--do-- (e) Single Tee with door 110mm dia

--do-- (f) Single Tee 110mm dia

--do-- (g) Bend 87.5 Dg. 110mm dia

--do-- (h) Bend 87.5 Dg. 75mm dia

--do-- (i) Single Tee with door 75mm dia

--do-- (j) Door Bend 87.5Dg. 75mm dia

--do-- (k) Door Bend 87.5Dg. 110mm dia

P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: (a) 110mm dia

--do-- (b) 75mm dia

P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Bend 87.5 (110mm dia)

Door Bend (top side) (110mm dia)

b) Pipe Clip (110mm dia)

P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: a) Plain Tee 110mm dia

--do-- (b) Bend 45 110mm dia

--do-- (c) Door bend (left &right) 110mm dia

--do-- (e) Vent Cowel

Construction of manhole in all type of soil inner size 90 X 60 Cm. thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring,making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C.flooring , 25 Kg. CI cover with frame of 40mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. Depth upto 0.5mtr

Construction of soakage well in all type of soil 300 mm thick dry masonry top and bottom 300 mm course in CM 1:6, 80 mm thick stone slab, jointing of slab in CM 1:3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C. flooring, earth work complete as per approved drawing including disposal of earth within a lead of 50 mtr. : Size 300 Cm. dia outside & 300 Cm. depth.

P & F Ball Cock (IS:1703 Mark) with Rod & P.V.C. Ball complete : Brass wt. 400 gm, 15 mm.

P & F 15 mm. Dia Connection pipe of approved quality/make: C.P. Brass Pipe with CP Brass nuts upto length 450 mm.

P&F Soap dish or tray of approved quality/ make. C.P. brass heavy and superior quality

P&F Shower arm 15mm dia of approved quality/ make. C.P. brass heavy & superior quality 150mm projection.

P&F Jet spray for water closet with C.P. copper tube flange of approved make

P&F Grating of approved quality/ make Heavy quality of approved make 125mm

P & F Square-mouth gully trap `A` grade (IS :marked) of approved make complete with C.I. grating, frame & Cover masonary chamber in C.M. 1:6, 100mm thick C.C. 1:5:10 base concrete, 40mm thick C.C.M-15 grade coping, 12mm thick cement plaster in CM 1:3 complete as per approved design & type. Trap size 150 X 100mm, 7.2 Kg. C.I. cover with frame, Internal Chamber size 300 X 300mm.

Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipes type `B' for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make. 110mm dia

--do-- 75mm dia

P&F towel rail or ring of approved quality /make: C.P. brass towel ring revolving type

P&F extension pipe for bib cocks of approved quality/ make: C.P. brass of Heavy & superior quality 50x15mm

P & F Ist quality WVC Urinal (IS:2556 mark) with 25 mm dia G.I. waste pipe, dome couplings, concealed iron brackets or screws etc. complete. Mini stall size 440x315x320 mm.

P&F Bath shower of approved quality/ make . C.P. brass fixed

P&F Bath shower of approved quality/ make. C.P. brass of heavy & superior quality 150mm.

P & F Sink Cocks of superior quality & approved made: C.P. Sink cock swinging spout 15 mm.

P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15 mm Brass (IS:8931 marked).

P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15 mm Brass (IS:8931 marked) with 37 Cm long pipe and nut.

Construction of Cement concrete chamber 125mm dia on depressed floor upto 45cm height from floor with : C.P. Brass Grating

P&F Toilet shelf of approved quality/make : Glass shelf with edges rounded off anodised aluminium angle frame & C.P. brass brackets & guard rail size 600x120mm.

Construction of septic tank in all type sof soil with 40cm thick masonry in CM 1:6 15cm thick CC bed of 1:5:10 M-15 grade CC flooring & over stone slab covering, 80mm thick slab jointing of slab in CM 1:3, Ralthal, Kharanja, 50mm thick stone partiton walls, 20mm thick plaster in CM 1:6 finished with neat floating cement, 4Nos C.I. foot rests of approved design, two No. 450mm dia 25Kg each C.I. cover with frame, earth work etc. complete as per approed drawing incl. disposal of surplus earth wtihin a lead of 50mtr. Size 400x140x150cm (for 50users)

P & F Marble Urinal Partition slab both sides polished of approved design cut from marble size 900x600mm. Makrana 'Albets' Marble having light streaks.