Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹4.9 LAdmitted-Finance | -1.00% | ₹4.9 L | L1 | Admitted-Finance |
| 2 | L2₹5.0 LAdmitted-Finance | +0.00% | ₹5.0 L | L2 | Admitted-Finance |
| 3 | L3₹5.1 LAdmitted-Finance | +2.00% | ₹5.1 L | L3 | Admitted-Finance |
| 4 | L4₹5.1 LAdmitted-Finance | +3.00% | ₹5.1 L | L4 | Admitted-Finance |
Updated dates
Tender Value
Refer Docs
Closing Date
16 Apr 2026, 2:00 pmClosed
Deputy General Manager (TS-PE)
CPCL- Manali, Chennai.
Procurement of Chairs for Refurbished Conference Hall at Process Engineering Department
2026_DGMMC_10275_1
CPCLPE2603
Limited
Administration - All
CPCL- Manali
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
Exempted
21 Apr 2026
26 Mar 2026
16 Apr 2026
26 Mar 2026
16 Apr 2026
27 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 10Supplying and installing Godrej Make or equivalent (KAREENA NXT MID BACK CHAIR) at designated place inside proposed building including all material costs,transportation costs,labour ,tools and tackles all complete as directed by Engineer in Charge. Seat/back assembly: the seat should be made up of 1.2 ±0.1cm. thick hot pressed plywood and upholstered with fabric or synthetic leather and moulded polyurethane foam. the back should be made up 1.2 ±0.1cm. thick hot pressed plywood upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam. the back ply and foam should be designed with contoured lumber support for comfortable seating posture.back size 48cm.(w) x 64.5cm.(h)seat size 51.0cm.(w) x 48.0cm.(d)high resilience (hr) polyurethane foam: the hr polyurethane foam for seat and back should be moulded with density = 45 +/-2 kg/m³ and hardness load 16 ± 2 kgf for 25% compression.armrests: the armrest top should be made of moulded polyurethane (p.u) and mounted on to a fixed type m.s. tubular armrest support chrome plated. the arm support has static vertical adjustment of ±1.5±0.05cm. front pivot synchro mechanism: the mechanism should be designed with the following features: • 360° revolving type. • single point control. • front pivot for tilt with feet resting on ground ensuring more comfort. • tilt tension adjustment. • 4-position locking with anti-shock feature. • seat back tilting ratio of 1:2. fixed backrest :the backrest should be of a fixed type mechanism i.e. no back up/down adjustment.pneumatic height adjustment :the pneumatic height adjustment has an adjustment of 9.0 ±0.3cm.pedestal assembly:the pedestal should be fabricated from 0.2 ± 0.02 cm thick hr sheet ( should be : dd 1079 / hr skin pass ), chrome plated and assembled with injection moulded black polypropylene hub cap and 5 nos. twin wheel castors. the pedestal should be 66.0 ±0.5cm. pitch-center dia. (76.0 ±1.0cm. with castors). twin wheel castors: the twin wheel castors should be injection moulded in black nylon. Supplier to funrnish proof of service units in chennai and stock guarantee for spare parts for 7 years after model discontinuation. Products to be approved only based on Mock Up evaluation. | |||||
| 20Supplying and installing Godrej Make or equivalent (KAREENA NXT HIGH BACK CHAIR) at designated place inside proposed building including all material costs,transportation costs,labour ,tools and tackles all complete as directed by Engineer in Charge. Seat/back assembly: the seat should be made up of 1.2 ±0.1cm. thick hot pressed plywood and upholstered with fabric or synthetic leather and moulded polyurethane foam. the back should be made up 1.2 ±0.1cm. thick hot pressed plywood upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam. the back ply and foam should be designed with contoured lumber support for comfortable seating posture.back size 48cm.(w) x 76.0cm.(h) seat size 51.0cm.(w) x 48.0cm.(d).high resilience (hr) polyurethane foam: the hr polyurethane foam for seat and back should be moulded with density = 45 +/-2 kg/m³ and hardness load 16 ± 2 kgf for 25% compression.armrests :the armrest top should be made of moulded polyurethane (p.u) and mounted on to a fixed type m.s. tubular armrest support chrome plated. the arm support has static vertical adjustment of ±1.5±0.05cm.front pivot synchro mechanism: the mechanism should be designed with the following features: • 360° revolving type. • single point control. • front pivot for tilt with feet resting on ground ensuring more comfort. • tilt tension adjustment. • 4-position locking with anti-shock feature. • seat back tilting ratio of 1:2. fixed backrest :the backrest should be of a fixed type mechanism i.e. no back up/down adjustment.pneumatic height adjustment :the pneumatic height adjustment has an adjustment of 9.0 ±0.3cm.pedestal assembly:the pedestal should be fabricated from 0.2 ± 0.02 cm thick hr sheet ( should be : dd 1079 / hr skin pass ), chrome plated and assembled with injection moulded black polypropylene hub cap and 5 nos. twin wheel castors. the pedestal should be 66.0 ±0.5cm. pitch-center dia. (76.0 ±1.0cm. with castors). twin wheel castors: the twin wheel castors should be injection moulded in black nylon. Supplier to funrnish proof of service units in chennai and stock guarantee for spare parts for 7 years after model discontinuation. Products to be approved only based on Mock Up evaluation. | |||||
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.16 MB
CPCLPE2603-Tender_Document.pdf
Tender Documents • 4.15 MB
BOQ_10672.xls
BOQ • 0.38 MB
Download all tender documents and submit your bid