PROVN OF ARMAMENT/GUN COMPONENT SHOP (STRIP INSP ROOM) ALONGWITH COMPUTER INSTALLATIONS FOR A VEH SEC OF ARMD WKSP AT ZONE-8 BABINA CANTT

Amount

Surface dressing in any type of soil n exc 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Surface dressing in any type of soil n exc 15 cm deep and getting out in Hard/dense soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard & dense soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated soil exc. 50m upto 250 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L Treating the bottom and sides of excavation at the rate of 5 liters of emulsion per sqm of surface area complete all as specified and directed

M&L Treating the backfill in contact with foundation at the rate of 7.5 liters of emulsion per Sqm of vertical surface (Area of sub structure in contact with backfill to be measured) complete all as specified and directed

M&L Treating the top surface of filled earth at the rate of 5 liters of emulsion per Sqm of surface area complete all as specified and directed.

M&L Treating the soil under plinth protection at the rate of 5 liter of emulsion per sqm of surface area complete all as specified and directed.

M&L Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per meter of the perimeter wall complete all as specified and directed.

M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed , including watering, consolidating and dressing complete all as specified and directed.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work up to plinth level : 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) complete all as specified and directed.

M&L providing M25 Design mix (using 20 mm graded aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L RCC M25 Design mix (using 20mm graded aggregate as in slab supported on walls, beams and columns in floors, roofs, landings balconies canopies deck slabs and in shelves and similar work complete all as specified and directed

Mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Formwork to sides of concerte foundation, footings, bases of columns, raft beams, sides and soffits (if any) of foundation and plinth beams, and similat work vertical or to batter complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs landings and similor work not exceeding 200 mm thick complete all as specified and directed.

M&L for Pre-cast cement concrete block masonary with solid block type B-1 1:2:4(using 20 mm graded stone agg ) exc 10 cm in width and setting in mortar 1:4 complete all as specified and directed.

Providing and fixing in position, for outer walls 170 mm thick factory made Expanded Polystyrene Core (EPS Core) wall panels consisting of EPS core sandwiched between two Engineered sheets of welded wire fabric mesh duly finished with shortcrete materials on outer faces. The fabric mesh shall be made of 2.5 mm dia G.I. wire mesh with 75 mm pitch in both the directions and on both faces of the wall . The EPS core shall consist of 100 mm thick EPS of density not less than 15 kg/ per cum. Both the outer faces of the panel shall be finished by applying the layer of 35 mm thick cement mortar 1:3 {1 cement: 3 coarse sand (not having more than 40% stone chips of size upto 6 mm)} À with the help of shotcreting/guniting equipment etc at a pressure not less than 1 bar (100Kn/m2) and both surfaces finished with trowel. Fixing operations of wall panels shall be completed in all respect as per drawings and specifications and under the overall direction of EPS panel manufactures, the manufactures shall give complete 2D plan design, structural design , 3D model design before commencement of work at no additional cost.

Providing and fixing in position, for inner walls 150 mm thick factory made Expanded Polystyrene Core (EPS Core) wall panels consisting of EPS core sandwiched between two Engineered sheets of welded wire fabric mesh duly finished with shortcrete materials on outer faces. The fabric mesh shall be made of 2.5 mm dia G.I. wire mesh with 75 mm pitch in both the directions and on both faces of the wall . The EPS core shall consist of 80 mm thick EPS of density not less than 15 kg/ per cum. Both the outer faces of the panel shall be finished by applying the layer of 35 mm thick cement mortar 1:3 {1 cement: 3 coarse sand (not having more than 40% stone chips of size upto 6 mm)} À with the help of shotcreting/guniting equipment etc at a pressure not less than 1 bar (100Kn/m2) and both surfaces finished with trowel. Fixing operations of wall panels shall be completed in all respect as per drawings and specifications and under the overall direction of EPS panel manufactures, the manufactures shall give complete 2D plan design, structural design , 3D model design before commencement of work at no additional cost.

Providing and fixing in position for roof 185 mm thick factory made Expanded Polystyrene Core (EPS Core) roof/floor panels made of 2.5 mm dia G.I. wire mesh with 75 mm pitch in both the directions and on both faces of panel,. The EPS core shall consist of 100 mm thick EPS of density not less than 15kg/ per cum. The bottom side of the panel shall be finished by applying a layer of 35 mm thick cement mortar 1: 3 {1 cement: 3 coarse sand (not having more than 40% stone chips of size upto 6 mm)} À with the help of shotcreting equipment etc at a pressure of not less than 1 bar (100Kn/m2) and surface finished with trowel. The top face of the panel shall be provided and finished by applying 50 mm thick layer of cement concrete 1:1.5: 3 (1 cement :1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). including neassary support for EPS panel /concerete. Fixing operations of roof/floor panels shall be completed in all respect as per drawings and specifications and under the overall direction EPS panel manufactures, the manufactures shall give complete 2D plan design, structural design , 3D model design before commencement of work at no additional cost.

M&L for mild steel section rectanglur pipes for coloumns, beams as in frame for building etc, complete all as specified and design given by EPS panels manufacturer complete all as specified and directed.

S & F MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachmentconfirming to FE 410-W (Gde E-250) quality complete all as specified and directed.

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

Providing and fixing ISI marked alumunium sliding door bolts with nuts and screws etc. complete, 300 x 16 mm complete all as specified and directed.

S&F 150 mm aluminium handle cast type anodized complete all as specified and directed.

S&F Aluminium anodised, barrel tower bolts of extruded section of length 150 mm and fixed with cadimium plated wood series, complete all as specified and directed.

S&F 100 mm Butt hinges, extruded MS with galvanised mild steel hinge pin, anodised and fixed, complete all as specified and directed.

Providing and fixing pressed steel door frames for doors with one or more rebats including necessary fixing lugs, hinges, lock strick plate etc complete size 105x60mm complete all as specified and directed.

M&L Hard core of base n exc 63mm of broken stone or boulder deposited,spread and leveled in layers n ecx 15 cm thick watered and rammed to a true surface copmlete all as specified and directed.

M&L for cement concrete 75 mm thick PCC 1:4:8 type using 40 mm graded aggregate as in sub base complete all as specified and dircted.

M&L for cement concrete flooring 25 mm thick PCC 1:2:4 type B1 using 20 mm graded aggregate finished even and rough to receive tiles complete all as specified and directed.

M&L for Screed bed or bedding layers of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectengular ) area of each tile exceeding 0.18 Sqm but not exc 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectengular ) area of each tile exceeding 0.18 Sqm but not exc 0.36 Sqm, in dado/Skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor inculding 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectengular ) area of each tile exceeding 0..06 Sqm but not exc 0.11 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor complete all as specified and directed

M&L for glazed ceramic tiles of size 300x450x7-8 mm thick on vertical surfaces suck as skirting /dado set and jointed in neat cement slurry pointed ,jointed in white/coloured cement to match complete all as specified and dircected

S&F 75 mm PVC SWR pipe single socketed in any length with rubber ring joints laid in walls, floor complete all as specified and directed.

S&F 110 mm PVC SWR pipe single socketed in any length with rubber ring joints laid in walls complete all as specified and directed.

S&F 75 mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F 110 mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F 75 mm dia PVC (SWR) Tee any radius complete all as specified and directed.

S&F 110 mm dia PVC (SWR) Tee any radius complete all as specified and directed.

S&F 125/110 mm PVC (SWR) gully trap, setting and jointing with solvent cement complete all as specified and directed.

Supply & Fix for Vitreous China Squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rests on floor fixed with using PCC filling and trap etc complete all as specified and directed.

S&F for PVC low level flushing cistern 10 lts capacity with ball valve float and handle ,syphonic action type including brackets and flush pipe of polythelene of low or high density or PVC 32 mm dia low level flushing cistern fixed in repairs all as specified and directed.

S&F for vitreous china wash hand basin ,white, flat back, size 550x400 mm including chain and plug and porcelain stopper, brackets including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F for PVC connection 15mm bore with PTMT nuts and 600 mm long complete all as specified and directed.

S&F for 15 mm angle cock of chromium plated fancy type copper alloy screwed down high pressure for iron pipe or for unions fixed complete all as specified and directed.

S&F for 15 mm bib cock of chromium plated fancy type copper alloy screwed down high pressure for iron pipe or for unions fixed complete all as specified and directed.

S&F for 15 mm Pillar Tap of chromium plated fancy type copper alloy screwed down high pressure for iron pipe or for unions fixed complete all as specified and directed.

S&F rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered white colour 500 ltr capacity with connecting nipple,hoisted and fixed in position and making inlet or outlet connection complete all as specified and directed.

S&F Ball valves 20mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) complete all as specified and directed.

S&F PVC floor trap 75 mm dia with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and directed.

S&F in repair Brass cromium plated towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F for Box type steel Ventilator with 80x40x1.25mm MS Rectangular hollow section with top hung shutters including hinges steel peg stay complete all as specified and directed.

S&F of CRC sheet box type steel ventilator with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F 3 mm thick coloured sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

M&L water proofing treatment to roof slab with APP based modified polymeric membrane centre core 100mm microne HMHDPE outer flim 20 micron each having thickness 3 mm weight not less than 3kg/Sqm with 100mm overlap laid as per manuacturer's instructions and complete all as specified and directed with following course of description below:- (a) 1st coat applying bitumen primer confirming to IS-3384-1965 @ 0.40 Kg/Sqm to be applied on prepared roof surface till the surface is properly impregnated. (b) 2nd coat of bonding material using blown type bitumen conforming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm. (c) 3rd course ie. laying of APP Based modified membrane described herein before with 100mm overlap in longitudinal direction and 150mm in transverse direction, all joints and changes in all direction should be covered covered with cement mortar (1:3) mixed with SBR latex @ 200ml per bag of cement and cured well before laying the membrane. (d) Applying one coat of bituminious aluminium paint @ 0.20 Kg Per Sqm over APP membrane,

M&L for rendering 10mm thick fair finished using cement mortar (1:4) with WPC on flat roof slab complete all as specified and directed.

Liquid water proofing compound complete all as specified and directed.

Prepration new surface aplying primer and ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) complete all as specified and directed.

Prepration new surface applying primer and ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron/steel works complete all as specified and directed.

M&L 75mm thick for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection and path laid in alternate panels not more than 3 mtr in length, laid to slope 1:30 including forming joints 10 mm wide and upto full depth of PCC and filled with bitumen mastic (1:3) 1 part bitumen 85/25 and 3 parts of sand complete all as specified and directed. Note:-Rate is deemed to be inclusive of materials against forming & filling of joints.

Suface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and directed.

M&L for cement concrete ( 1:4:8) type D -2 using 40 mm graded stone aggregate as in foundations filling and mass concrete etc complete all as specified and directed.

M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L 60 mm thickness M-35 Grade , machine pressed precast concrete Inter locking paver blocksany shape & size with grey cement and no pigment conf to IS-15658-2006 laid dry over sand cushion.(Sand cushion shall be measured and paid separately) complete all as specified and as directed.

M&L, for PCC 1:2:4 type B-1 using 20mm graded stone agg as in coping/kerb complete all as specified and directed.

Excavation in trenches not exc 1.50 mtr wide and not exc 1.50 mtr in depth for foundation etc, of for manholes getting out in soft/loose soil all as specified and directed

Removing excavated soil to a distance not exc 50 mtr and depositing complete all as specified and directed.

M&L hardcore of gauge n. exc 63mm of brocken stone or boulders, deposited, spread and levelled in layers n exc.15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L hardcore of gauge n. exc 63mm of brocken bricks deposited, spread and levelled in layers n exc.15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L PCC 1:4:8 type D2 using 40mm graded aggregate as in foundation concrete complete all as specified and directed.

M&L for brick work with sub class 'B' bricks staright or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.

M&L rendering 15mm thick in CM 1:4 on other than fair face of brick work surfaces to be finished fair and even smooth with using extra cement and mix with 3% water proofing compoiund by weight of cement (WPC measured seperately a supply only) complete all as specified and directed.

M&L PCC 1:3:6 type C2 in concrete bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested in 150mm dia RCC pipes complete all as specified and directed.

S&F 150mm RCC pipe class NP3 laid in trenches and jointed with complete collars all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L PCC 1:2:4 type B1 (20mm aggregate)precast covers slab set in CM 1:4 including demolition complete all as specified and directed.

M&L steel TMT bar of 6 to 8 mm dia, cut to length, bent to shape required, including cranking, hooking for ends and binding with and including mild steel wire (annealed ) not less than 0.9mm dia complete all as specified and directed.

M&L PCC 1:2:4 type B2 using 40mm graded aggregate as in surface channels and drains complete all as specified and directed.

M&L, for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.

M&L RCC 1:2:4 type B1 ( using 20 mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies , canopies, deck slabs complete all as specified and directed.

M&L for MS work such as rungs, handles to manholes, etc complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth for fdn etc in any type of soil complete all as specified and directed.

M&L, for PCC 1:3:6 type C2 (Using 40mm graded stone agg) as in foundation filling and mass concrete complete all as specified and directed.

M&L, for Walling of random rubble or brought upto courses , Well bonded, bedded and solidily hearted, built in CM1:6 complete all as specified and directed.

M&L EXTRA over stone walling for hammer dressing 20 mm of face beds and joints as specified of random rubble walling uncoursed or brought upto courses complete all as specified and directed.

M&L, for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.

M&L, for Add or deduct for each 25 mm girth or part thereof over or under 30cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.

M&L, for Flush pointing to random or polygonal rubble, uncoursed or brought upto courses built in CM 1:4 complete all as specified and directed.

M&L, Rendering 15 mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces, finished fair and even complete all as specified and directed.

M&L for provinding precast cement concrete set in CM 1:4 type B1 1:2:4 (20mm graded aggregate) as in cover slab complete all as specified and directed.

M&L for TMT steel bars 10mm dia and over, as in reinforcement for concrete, cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and directed.

S&F 3-layered PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain and brass threaded polypropylene randon fittings fixed complete to walls ceiling or in floors complete all as specified and directed

M&L Rendering 15 mm thick on fair faces of brick surfaces in cement mortar (1:4) finished even and fair including mixing of integral water proofing admixture in the proportion as mentioned in manufacturer's instructions complete all as specified and directed. Note : Integral water proofing mixture shall be measured & paid for separately.

M&L for rendering 10mm thick on fair faces of wall even and smooth finish without using extra cement on conc/brick surfaces in CM 1:6, complete all as specified and directed

M&L renderig 5mm thick in cement mortar 1:4 on ceiling surface and finished even and smooth with out using extra cment complete all as specified and directed.

M&L for preparing new plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.

M&L for preparing newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer including 3mm thick putty to make the surface to be plain and smooth complete all as specified and directed

M&L prepration new surface of ceiling and applying three coats of white wash complete all as specified and directed.

S&F Aluminium power coated frame for doors,windos, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.

S&F Anodised aluminium door shutters, aluminium section weighing 0.55Kg/m including necessary joining clips,ruber neoprene packing, handles 2 Nos in each door, hinges anodised aluminum snap beading screw etc complete all as specified and directed.

M&L sheet glass, ordinary quality and glazing with oil putty in suare but exc 0.5 sqm in each pane 5.5 mm thickness complete all as specified and directed.

M&L Prelaminated particle board18-19mm thick ,interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work complete all as specified and directed.

M&L for point wiring one light point controlled by one switch with PVC insulated and unsheathed, flame retardant Low Smoke & Halogen (FRLS) 1100 volt grade electric cable of 1.5 sqmm (nominal area) with stranded copper conductor single core in and including rigid concealed point wiring not less than 20 mm dia, clip, with suitable MS terminal boxes ( not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including earth dolly with 3 mm thick plastic laminated sheet top cover of approved colours including 1.50 sqmm green stranded copper conductor as continuous earth wire with all accessories including lugs required, complete all as specified and directed.

One light point controlled by one switch

One fan point controlled by one switch & regulator complete all as specified and directed.

One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board complete all as specified and directed.

One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board complete all as specified and directed.

All as per Ser item No 111 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant Low Smoke & Halogen (FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 2.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.

S&F switch piano flush button type 5 Amp single pole one way complete all as specified and directed.

S&F socket outlet 2in1, 3 pin, 5 Amp flush type complete all as specified and directed.

S & F delux Fan Regulator electronic rotary, step type 240 Volt 50 Hz, complete all as specified and directed.

S&F switch piano flush button type 15 Amp single pole one way complete all as specified and directed.

S&F socket outlet 2in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and directed.

S&F ceiling rose,surface bakelite 63 x50mm three terminals complete all as specified and directed.

S&F for sub main wiring with PVC insulated, unsheathed 2 single core cable 1100 volts grade with copper conductor of size 6.0 sq mm (Nominal area) multi stranded drawn into conduit with and including 6.0 sqmm green stranded copper conductor as contineous earthwire with lugs complete all as specified and directed. Note: New conduit and conduit accossories included.

S&F sheet metal enclosure double door concealed suitable for distribution boards when MCBs to be used having 100 Amp rated bus bar SPN DB 8 ways 240 V complete all as specified and directed .

S&F MCB single pole and neutral 40 Amp/63 Amp 240 V ,10KA , 'C' series, complete all as specified and as directed with copper lugs.

S&F MCB single pole 6 to 32Amps 240 V,10KA, 'C' series, with copper lugs complete all as specified and directed.

S&F Vertical TPN DB-DPX 125 MCCB DBs 4 way double door with provision for 125 Amps MCCB 4 pole 415 volts as incomer and SP/TP MCBs as out going no of modules DPX 125+12,complete all as specified and directed.

S&F MCCB 125 Amps, 415 volts, 4 pole, 50 Hz, having 25 KA rupturing capacity, 415 volts with electronic trip arrangment and setting screw including making connection with existing cable and materials like copper strips,lugs,nut & bolts etc. complete all as specified and directed.

S&F LED security/ street light fitting 1 X35 W LED 5700K energy saving & environmental freindly long life versatile pressure die cast aluminium housing with acrylic cover as diffuser with IP 65 protection and impact resistance of IK 07 luminaire with high power LEDs as light source and electronic driver suitable for pole dia 40 mm including 45 mm dia light grade tube bracket, bend to shape 1.80 mtr length with two nos clamp of size 50mm x 6 mm with nut, bolts, washers etc including connection with 1.5 sqmm two single core PVC insulated and PVC sheathed cable stranded Copper conductor upto ceiling rose and fixing on walls/pole complete as specified and directed.

Supply and fix rewirable switch fuse unit having rated voltage of 415 V AC 50Hz of TPN type of rated current capacity 63 amp with enclosure complete all as specified and directed.

Supply and fixing 22 W LED 6000k Decorative ultra slim linear LED fitting fixture with extruded polycarbonate ,environmental friendly ,energy efficentinterated driver and 28watts lamp fitted including wiring upto and terminal into ceiling rose complete all as specified and directed.

S&F of 36 W of size 2 Feet X 2 Feet LED 6500K rescessed mounting luminaire glare free suitable for armstrong/ grid ceiling in MS/CRCA housing with high brightness LEDs incl wiring upto and terminating into existing ceiling rose complete all as specified and directed.

S&F Ceiling fan 1200mm sweep BEE star rating,AC single phase 230 V including all arrangement like hook,pipe of suitable size all as specified and directed.

S&F Change over switch, 4 pole off load side handle operated 50 HZ,415 Volt,63 A with sheet metal enclosure complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick weight not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.

Supply , installation,testing and commissioning of hi wall split air cooled split unit Inverter Air Conditioners 1.5 ton electric driven single phase of capacity of units indoor/outdoor complete accessories including suction/discharge pipe with insulation and cordless remote control unit and with In built air ioniser and plasma filter for better indoor air quality with minimum BEE 5 star rating and EER 3.2 of capacity, using Eco freindly refrigerent gas R- 410A/ R- 32 ( Green gas) including gas charging ,installing at varandah/chhajja/roof including electrical connection for power supply with suitable electrical copper cable, fixing PVC Drain pipe for water drainage and jointing suction & discharge line with insulation to indoor unit and all the necessary connection including grouting nut, bolt, washer and fixing of indoor unit at wall/floor including grouting of angle iron 50X50X6 mm or MS fabricated AC Stand of required length complete all as specified and directed.

Supply fixing connecting and testing automatic voltage stabilizer, wall mounted type, single phase, naturally air cooled, indoor type designed for input variation between 170 to 250 Volt and output voltage stabilised at 230 volts with acuracy of (+) 2.5% and capacity 3 KVA complete all as specified and directed.

Supply & fixing pre wired power unit with 20 Amp mcb C series ISI marked and plug with led indicator having 240 volts suitable complete all as specifiedand directed.

Supply and laying XLPE insulated , armoured heavy duty electric cable with Al conductor, 1100 volts grade, cross sectional area 25 X 4 Sqmm complete all as specified and directed.

Excavation in trenches in any type of soil not exe 1.5 mtrs wide and not exe 1.5 mtr in depth for laying of pipe/cables etc and getting out incl forming bottom surface to the required level/slope etc complete all as specified and directed.

Supply laying dry clean river sand free from sharp materials, unscreened filling in trenches around under ground cables for cushioning complete all as specified and directed.

Supply and laying precast concrete cable cover class LV type -I flat size 250x150x40 mm laid parpendicular to the axis of cable in trenches etc complete all as specified and directed.

Supply and laying galvanised pipe of medium grade complete including all fitting of dia 25 mm complete all as specified and directed

Supply and fix valve stop/GM screwed, for size 25 mm dia pipe complete all as specified and directed

Cutting of CI/DI pipe 80-200mm dia in position for insertion of new tees ,branches etc complete all as specififed and directed.

m/s jethanand bhatia

M/s JS Constructions

SHIV SHANKAR MISHRA

M/S H. R. CHAUDHARY

Samaksh Enterprises

NIHAL ENTERPRISES