Repair Replacement and Erection of Roof sheets and structural support members of shed

Amount

Procurement, Supply, Fabrication, Erection of MS structural work with structural material like, plates, Channels, angles etc with two coats of epoxy as per technical specifications, design, and EICs instructions

Providing and fixing pre coated galvalume roofing profile sheets of approved size, shape and pitch up to and including single length of 12 m. The sheets shall be fixed using self drilling / self tapping screws of size (5.5 x 55 mm) with EPDM seal or with polymer coated J or L hooks , bolts and nuts 8 mm dia. with bitumin and GI limpet washers filled with white lead complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses including cutting to size and shape whenever required , as directed by EIC. Galvalume sheets roofing 0.5 mm thk. in single sheet.

Providing and fixing Grid System False Ceiling using Ceiling Tiles using pre coated GI T Grid system in 600 x 600mm module which includes providing and fixing wall angle along the perimeter of the room with help of nylon sleeves and wooden screws at 300mm centers. Then suspending the main tee of size from the soffit with help of soffit cleat, rawl plugs and wire rod with Leveling spring clip at 1200mm c/c. 1200mm Cross Tee is then interlocked into the pre-cut slots in the main Tees at 600mm centres in direction perpendicular to the main Tee to make a grid of 600 x 1200mm. Finally 600mm Cross tees are then interlocked into the pre cut slots in the 1200mm tees at 1200mm centres and in direction parallel to the main tee. Cross tees having length more than 600mm are to be supported independently including, required cutting/ making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using suitable arrangement. Minimum 9mm thick PVC Laminated Gypsum Tiles (Square edge) of Size 595x595 mm shall be placed into the grid size of 600 x 600mm

Dismantling, removal , shifting and disposal of rusted corrugated sheets with safety.

Taking actual site measurements, Procurement , supply, replacement of damaged members with new 180 x 80 purlin members at utility block.

Procurement supply and erection of MS anchor M 12 x 200 fasteners with chemical anchoring of HILTI make.

Procurement, Supply, Threading, fitting and Erection of GI piping at IP site with required sealent and fixing clamps and anchor fasteners, Hardwares of 15 NB size

Procurement, Supply, Threading, fitting and Erection of GI piping at IP site with required sealent and fixing clamps and anchor fasteners, Hardwares of 25 NB size

Procurement, Supply, Threading, fitting and Erection of GI piping at IP site with required sealent and fixing clamps and anchor fasteners, Hardwares of 50 NB size

M/s.Bhushan J Pawade

OM POWER SYSTEMS

vikas construction

PLANT ENGINEERING PEOPLE