GE/S(U)-65/2020-21 REPAIR/RE-SURFACING AND RE-PAINTING OF HARDSTANDING IN FRONT OF THE SAFETY BAY SPL REPAIR OF 04 X BATHROOM AND KITCHEN WASHROOM OF OTM ACCN BLDG NO NP-83 PROVN OF DRAIN COVER FOR 14 EW BN 02 X TOILETS NEAR BLDG NO NP-08 AND CERTAIN

Amount

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish of the premises complete all as specified and directed.

Taking down cement plaster, any descripition on brick or stone or cement concrete walls including raking out joints, hacking for key, removing all type of vegetation (like people tree etc.) scrubbing down with water complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square meter each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed by Engr-in-Charge.

15 mm thick plastering on brick or concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and directed.

15 mm thick plastering on brick or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

25 mm thick, Plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregates) as in sub base complete all as specified and directed.

15 mm thick screed bed or bedding layer in cement mortar 1:4 for layinf floor finishes, complete all as specified and directed.

15 mm thick cement plaster on fair face of brick or concrete surface in cement mortar 1:4, finished even and fair, as in backing coat to receive tiles complete all as specified and directed.

Non skid, coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Glazed coloured ceramic tiles in vertical surface 350 x 250 x 7 mm/ 450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

Solid PVC door frame of size 50 x 47 mm made out of 5 mm wood grain printed PVC sheet used instead of colour PVC sheet & edges will be printed to match with printed sheets reinforced with M.S. square tube, supplying and fixing in opening complete all as specified and directed in SSR Part -I, Section 8B.1.1.

Factory made solid PVC moulded door shutter with particle board core, 28 to 30 mm thk (stiles), with 2 to 4 or 6 raised panel design with 2 mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face and 2 mm plain colour PVC sheet on back face complete all as specified and directed in SSR Part - I, Section 8B.1.1.

Aluminium anodised, barrel tower bolts of extruded section 150 mm long complete all as specified and directed.

Aluminium alloy handles, fabricated type, anodised 150 mm size complete all as specified and directed.

100 mm long stainless steel butt hinges for PVC door complete all as specified and directed.

Galvanised mild steel wire cloth fixed in repairs having 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.

3 mm thick sheet glass odinary quality, glazing with oil putty in square not exceeding 0.50 Sqm in each pane fixed in repairs complete all as specified and directed.

Preparing plastered or unplastered new surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

Preparing plastered or unplastered old surfaces of walls and applying one coats of cement base paint complete all as specified and directed.

Applying one coat birla wall care putty on old plastered on wall surfaces including preparation of surface by brooming down or steel wire brushing, scrapping down vegetation growth, efflorscent salts and trading with oil greasy spot complete all as specified and directed with complete removing.

Two coats of distemper oil emulsion over a coat of primer including preparation of new plastered surfaces of walls complete all as specified and directed.

One coats of distemper oil emulsion over a coat of primer including preparation of old plastered surfaces of celing complete all as specified and directed.

Applying two coats of white washing on walls including preparation of old plastered surfaces complete all as specified and directed.

Applying two coats of white washing on ceiling including preparation of old plastered surfaces complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

Taking up or down 15 mm bore steel tubing with connections for cleaning for refixing or removing to store yard complete all as specified and directed.

Taking up or down 20 mm bore steel tubing with connections for cleaning for refixing or removing to store yard complete all as specified and directed.

15 mm bore galvanised steel water tubing 15 mm dia medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc. complete all as specified and directed.

20 mm bore galvanised steel water tubing 20 mm dia medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc. complete all as specified and directed.

Refixing old steel water tubing 15 mm bore medium grade galvanised and connections in new or old position (walls, ceiling, floor etc.) complete all as specified and directed.

Refixing old steel water tubing 20 mm bore medium grade galvanised and connections in new or old position (walls, ceiling, floor etc.) complete all as specified and directed.

10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white, with inlet, ball valve float and handle including brackets fixed in repair complete all as specified and directed.

110 mm bore PVC (SWR) pipes single socketed in any lenth with rubber ring joints fixed to walls fixed in repairs complete all as specified and directed.

75 mm bore PVC (SWR) pipes single socketed in any lenth with rubber ring joints fixed to wall fixed in repairs complete all as specified and directed.

PVC (SWR) bends any radius 75 mm bore complete all as specified and directed..

PVC (SWR) bends any radius 110 mm bore complete all as specified and directed.

75 mm dia PVC (SWR) floor trap plain, with grating including jointing with solvent cement complete all as specified and directed.

15 mm bore pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe or for brass ferrule fixed in repair complete all as specified and directed.

CP Soap dish holder fixed in repair complete all as specified and directed.

Vitreous china squatting pan, Orissa pattern, including cement concrete bedding, size 580 x 440 mm white with integral foot rests excluding flushing cistern and flush pipe but including connection to trap anti syphonage pipe etc. fixed in repairs complete all as specified and directed.

Vitreous china wash basin, white, flat back size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, flush pipe, CP waste coupling and waste pipe, cutting for and pinning in ends of bracket or erecting stand fixed as in repairs complete all as specified and directed.

Vitreous china urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement including water pipe, grating, waste pipe, coupling etc. complete all as secified and directed.

Chromium plated angle valves of 15 mm bore, with adjustable wall flange fixed in repair complete all as specified and directed.

PVC connection 15 mm bore with PTMT nuts of length 450 mm in repair complete all as specified and directed.

Towel rail 600 mm long of chrome plated fixed with and including chromium plated brass screws and cleats fixed in repair complete all as specified and directed. Make : Jaquar

15 mm bore bib taps, long body with wall flange with arreator fency type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule fixed in repair complete all as specified and directed.

Brass chromium plated shower rose 75 mm size with swivel joint fixed to pipe or union of 15 mm bore in repair complete all as specified and directed.

Concealed stop cock with sheet flange cast copper alloy, screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions fixed as in repair complete all as specified and directed.

Preparation of old steel surfaces over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

Preparation of old wooden surfaces over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

Dismantling of kota stone in slab any desctription or thickness as in flooring laid bedded and pointed in any mortar complete all as specified and directed.

Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slabe including rubbing and mirror polishing complete all as specified and directed.

Vitreous china wash down water closet pan (pedestal pattern) white plastic water closet seat & back with flat bottom and cover, mild steel chromium plated or aluminium anodised high device (excluding flushing cistern and flush pipe) but including fixing bolt and necessary connection with existing pipes fixed as in repair complete all as specified and directed.

Plastic water closet seat cover, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device in repair complete all as specified and directed.

Pre-cast reinforcement cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in cover slab for drainage etc. and set in CM 1:6 complete all as specified and directed.

TMT bars 10 mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Mild steel TMT bars 6 mm to 8 mm dia cut to length bent to shape required including cranking bending etc. TMT bars complete all as specified and directed.

PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in surface channel and drains including necessary form work and extra forming fair finsished drain or channels for inner girth in cement concrete etc. complete all as specified and directed.

15 mm thick rendering on fair faces of brick/ concrete surfaces of walls in cement mortar 1:4 and finished even and fair without using extra cement complete all as specified and directed.

De-silting of deposited earth, silt, mud, stone, wood or any unwanted materials inside existing drain by excavating and removing to a distance not exceeding 50 Mtrs from the site and depositing where complete all as specified and directed by Engr-in-Charge.

Demolition cement concrete in ground floors and paving (unreinforced) not exceeding 15 cm thickness (below or above ground floor) complete all as specified and directed.

75 mm thick cement concrete type C-2 (1:3:6) (using 40 mm graded stone aggregate) as in sub base of flooring complete all as specified and directed including necessary form work.

100 mm thick cement concrete type B-2 1:2:4 (using 20 mm graded stone aggregate) in floors with chequered finish including formwork complete all as specified and directed.

10 mm thick Contraction (dummy joints) 75 mm deep and 10 mm wide filled with pre-formed filler and top 30 mm primed and sealed with sealing compound grade 'A' on 100 mm thick concrete slabe including applying primer complete all as specified and directed.

Preparation of new concrete surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of priming paint plaster coat primer complete all as specified and directed.

Water closet two piece extunded WC with cistern seat cover & twin flush cistern as approved and complete all as specified and directed by Engr-in-Charge. Make : CERA or Equivelant complete set.

Wash hand basin counter/cabinet type complete fitting in repair as per sample approved and complete all as specified and directed by Engr-in-Charge. Make : Cera or equivelant.

CP waste coupling 32 mm bore with cup and washers complete all as specified and directed. Make : Jaquar

Long body Bib Cock with wall flange complete all as specified and directed. Make : Jaquar.

Angular stop cock with wall flange complete all as specified and directed. Make : Jaquar.

Tumblar holder complete all as specified and directed. Make : Jaquar

Toilet paper holder with flap complete all as specified and directed. Make : Jaquar.

Glass shelf complete all as specified and directed. Make : Jaquar.

Glass corner shelf complete all as specified and directed. Make : Jaquar.

450 mm long braided hose with M10X1 Nipple 15 mm Nut, O ring and rubber washer (Suitable for basin mixers) complete all as specified and directed. Make : Jaquar, Cat Part No : ALD 805B. Suitable for gysers.

450 mm long braided hose with M10X1 Nipple 15 mm Nut, O ring and rubber washer (Suitable for basin mixers) complete all as specified and directed. Make : Jaquar Cat Part No : ALD 803AB

Hand shower (Health faucet) with 8 mm dia 1 mtr long flexible tube and wall hook complete all as specified and directed. Make : Jjaquar

15 mm bore centre hole basin mixer with round spout with 450 mm long copper pipes and brass nuts with out Pop up in repair complete all as specified and directed. Make: Jaquar

Towel rack of stainless steel including fixing arrangement complete all as specified and directed. Make : Jaquar.

10 mm thick rendering on fair faces of brick/ concrete surfaces in cement mortar 1:3 and finished even and fair for receiving tiles on vertical surface complete all as specified and directed.

Two coats of distemper oil emulsion over a coat of primer including preparation of old plstered surfaces of celing complete all as specified and directed.

Preparation of old treated surface and applying a thin layer of wall putty and applying two coat of weather proof coat (Apex) colour approved and complete all as specified and directed by Engr-in-Charge.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15 mm complete all as specified and directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenches complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20 mm complete all as specified and directed.

Looking mirror with wooden frame of required size complete all as specified and directed by Engr-in-Charge. Make : Jaquar.

Rotational moulded polyethylene water storage tanks 1000 ltr capacity (cylindrical veritcal with closed top) hoisted and fixed in position complete all as specified and directed.

75 mm bore cast iron floor trap with grating including jointing to waste pipe fixed cement concrete type B-1 (1:2:4) complete all as specified and directed.

Demolition of reinforced cement work as in roof slabs (other than ground floors) beams staircases, landing chajjas and similar suspended work complete all as specified and directed.

Reinforced cement concrete M-25 (using 20 mm graded aggregate) as in slab supported on walls, beam and columns in floors, roofs landings, balconies etc. complete all as specified and directed.

Form work to soffits of suspended slabs such as roof, floor slabs, landings etc. not exceeding 200 mm thick (horizontal or sloping) for rough finished surfaces of concrete complete all as specified and directed.

Non skid ceramic joint free tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm and not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the slurry complete all as specified and directed.

Glazed ceramic tiles in vertical surface but 600 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

20 mm thick granite stone slab as in shelves/ vertical surfaces/platforms set and jointed in neat cement slurry, pointed in colored cement to match the shade including rubbing of moulding etc. complete all as specified and directed.

Rendering 15 mm thick in CM 1:6 on fair faces of brick/concrete finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Rendering 5 mm thick in CM 1:3 on ceiling, chajja, roof projection etc. finished fair and even without using extra cement complete all as specified and directed.

Preparation of new plastered or unplastered surfaces of wall and apply two coat of oil bound distemper over a coat of primer including two coats of wall care putty wall care putty complete all as specified and directed.

Preparation of new plastered or un-plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

Dismantling boarding any description any description fixed in any position with nails complete all as specified and directed.

Dismantling timber scantling over 40 Sqcm in section in any position (framed) complete all as specified.

18/19 mm thick plywood grade A (Termite treated/water proof), type BB fixed with screws to timber/iron frame work complete all as specified and directed. Make : Green Ply/Kit ply.

0.9 mm thick decorative choice of lamination type-1 of surface finish, colour and pattern as approved adhesive as per manufacturers instructions complete all as specified and directed.

IInd class soft wood as in plian solid straight chowkhats wrought framed rebated on the solid put together on with glue pinned at joints complete all as specified and directed.

Stain less steel catcher of superior quality complete all as specified and directed by Engr-in-Charge.

50 mm stain less steel pivoted type hinges of superior quality and complete all as specified and directed by Engr-in-Charge.

Aluminium 65 mm mortice lock four levers complete all as specified and directed. (ISI Marked)

Aluminium anodised barrel tower bolts of extruded section with 75 mm long bolt complete all as specified and directed. (ISI Marked)

Drawer side channel of standard size and including of rooler for moving drawer, mild steel bright finish or electrogalavanised width of flap 30 mm & length 60 mm in repair complete all as specified and directed.

Stainless steel fancy type,bright finish handles fixed with screw of 125 mm size in repair complete all as specified and directed.

Stainless steel multipurpose basket in wooden drawer/partitions for storing rations of various types made of 4 mm dia stainless steel rods, fixed in side partitions etc. fixed in repair complete all as specified and directed for modular kitchen.

Stainless steel luddle-craddle hanging stand for cutlery in repair complete all as specified and directed by Engr-in-Charge for modular kitchen.

Stainless steel zero crank hinges (auto) fancy type (with Euro concealed hinges) fixed to shutters in cupboards of standard size and shape for modular kitchen in repair complete all as specified and directed by Engr-in-Charge.

1.00 mm thick stainless steel single bowl Sinks with plugs, washers and wastes; including fixing contilever brackets and connecting union to pipe (size of bowl 410 mm x 330 mm x 160 mm) in repair complete all as specified and directed.

Recessed type stain less steel handle for cup boards size 150 mm long complete all as specified and directed.

Taking up or down GI tubing of 15 mm bore and connectios, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down GI tubing of 20 mm bore and connectios, including cleaning for refixing or removal to store complete all as specified and directed.

15 mm bore bib tap in repair complete all as specified and directed. Make : Jaquar, Cat Part No : CON 107KN

15 mm bore angular stop cock with wall flange in repair complete all as specified and directed. Make : Jaquar, Cat Part No : CON- 059KN

Dismantling of cast iron or reinforced concrete pipes, jointed in cement mortar pipes up to 100 mm bore in any position complete all as specified and directed.

25 mm thick PCC type B-0 (using 20 mm graded crushed stone aggregate) as in sub base for laying floor finishes complete all as specified and directed.

Screed bed or bedding layers of 15 mm thick cement mortar 1:6 for laying floor finishes complete all as specified and directed.

Vitrified ceramic tiles 10 mm thick (square/ rectangular) polished light shade, area of each tiles not exceeding 0.36 sm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and directed.

Hardcore with broken stone or boulders of gauge not exceeding 63 mm deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surfaces complete all as specified and directed.

Cement concrete 75 mm thick in sub-base type D-2 1:4:8 (using 40 mm graded aggregate) complete all as specified and directed.

Sand cushioning/filling under gloors or laying interlocking tiles complete all as specified and directed.

Machine pressed precast concrete interlocking paver blocks lacquor finish any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment complete all as specified and directed.

PCC type B-1, (1:2:4) (using 20 mm graded crushed stone aggregate) as in coping, benching, bed blocks etc. complete all as specified and directed.

Removing excavated soil material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the base in soil complete all as specified and directed.

Excavation over area not exceeding 1.50 Mtrs deep and getting out in soft/loose soil complete all as specified and directed.

Rolling and consolidating of formation surfaces in cutting, including watering as necessary, filling in the depressions which occur during the process, with 8 to 12 tonne power roller, consolidating to required gradient and camber complete all as specified and directed.

75 mm thick cement concrete type B-2 1:2:4 (using 20 mm graded stone aggregate) in floors with chequered finish including formwork complete all as specified and directed.

10 mm thick Contraction (dummy joints) filled with pre-formed filler and top 30 mm primed and sealed with sealing compound grade 'A' on 75 mm thick concrete slabe including applying primer complete all as specified and directed.

Excavation in post holes each not exceeding 0.50 cum getting out, returning filling in and well ramming earth around in layers not exceeding 25 cm, watering and removing surplus soil to a distance exceeding 1.5 kilo mtr and making good distrub surfaces as in hard/dense soil complete all as specified and directed.

Plain cement concrete 1:2:4 type B-2 (using 40 mm graded stone aggregate) as in post hole, foundation and similar work etc. complete all as specified and directed.

Roof trusses (framed) trussed, purlins, crane gantries rails and fastenings and heavy brackets, post, eves board including frame work and similar work framing (beam, tee, channel or flat sections) including distance pieces cleats including welding reavrign etc. complete all as specified and directed.

Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

Brick work with sub class 'B' brick straight or curved on plan exceeding 6 m radius in CM 1:4 as in brick work/brick pillars etc. complete all as specified and directed.

Preparation of new surfaces of wall and applying three coats of white wash complete all as specified and directed.

Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

Pre-painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

MS flat iron as in wind ties etc. confirming to Fe 410-0 or Fe 310-0 including clamps complete all as specified and directed.

Demolition of Brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pilars etc. but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

Dismantling of wooden boardind any description fixed in any position with nails complete all as specified and directed.

Dismantling stone slabs of any description and any position laid bedded and pointed in any mortar complete all as specified and directed.

Brick work with sub class "B" bricks straight or curved on plan exceeding 6 Metre mean radius in cement mortar 1:6 complete all as specified and directed.

Backing coat of cement mortar 10 mm thick in 1:3 to receive tiles in vertical surfaces complete all as specified and directed.

All as per ser item No 122 but skairting/dado complete all as specified and directed.

Glazed ceramic tiles of size 300 mm x 200 mm x 7 mm thick coloured tiles on vertical surfaces set and jointed in neat cement slurry and pointed in white cement mixed with colour pigments to match the existing surface complete all as specified and directed.

10 mm thick rendering in cement mortar (1:6) on other than fair face of brick or concrete surface complete all as specified and directed.

One coats of distemper oil emulsion including preparation of old plstered surfaces of walls complete all as specified and directed.

One coats of white wash including preparation of old plstered surfaces of celing complete all as specified and directed.

Reinforced cement concrete type B-1 (1:2:4) (using 20 mm graded stone aggregate), as in slab supported on walls, shelves and the like complete all as specified and directed.

Taking down shutters of any description exceeding 1 square metre but not exceeding 2 square metre each complete all as specified and directed.

35 mm thick glazed and skelton shutter second class hard wood, open rebated and prepared to receive glass, guage etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered bead for securing glass etc. with size of member of shutters all as specified in clause 8.24 (a) of SSR Part-I kin seasoned and chemically pressure treated complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames exceeding 1.5 sqm, glazed with putty or fixed with beads complete all as specified and directed. Note : Glass will be measured and paid for separately.

Aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.

Butt hinges 100 mm sizes, cold rolled mild steel complete all as specified and directed.

Extruded powder coated aluminum alloy handles, fabricated type and powder coated, 100 mm size complete all as specified and directed.

Floor door stopper of aluminum alloy body and tongue, anodised with hard drawn steel spring and vulcanised rubber piece fixed in floor, over all length of cover plate 140 mm complete all as specified and directed.

Two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description over 10 cm width or girth including preparation of surfaces complete all as specified and directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation and not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.

PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

Returning, filling including spreading leveling watering and well ramming in layers not exceeding 25 mm in any type of soil complete all as specified and directed.

PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs etc. complete all as specified and directed by Engr-in-Charge.

Providing Reinforced Cement Concrete design mix M-25 (using 20 mm graded aggregate) as in foundation including rafts, footings, foundation beams, plinth beams, bases of columns etc. complete all as specified and directed.

Providing Reinforced Cement Concrete design mix M-25 (using 20 mm graded aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed.

Providing Reinforced Cement Concrete design mix M-25 (using 20 mm graded aggregate) as in beams, cantilever, lintels over 1.5 m complete all as specified and directed.

Use and waste formwork to sides of concrete foundation footings base of coloumns sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished flat surface of concrete complete all as specified and directed.

Use and waste formwork to sides of columns, pillars, posts, struts, piers and stanchions, rectangular or square for rough finished flat surfaces of concrete complete all as specified and directed.

Formwork to flat sides and soffits of or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splays between floors and beams complete all as specified and directed.

Formwork to edges of concrete flats, treads breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 20 cm wide and sides of RCC/PCC bands in wall, horizontal or sloping and similar work exceeding 10 cm but not exceeding 20 cm wide complete all as specified and directed.

All as per ser item No 57 but 5 mm dia and over including 10 mm dia in stirrups, spaces and binders etc. complete all as specified and directed.

15 mm thick rendering in two layers (10 mm + 5 mm) on fair faces of brick/concrete or stone surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete with water proofing compound complete all as specified and directed. (WPC shall be measured separtely).

Supply only liquid water proofing compound complete all as specified and directed.

05 mm thick CM 1:4 rendering on fair surfaces of ceiling work and finished even and smooth without using extra cement complete all as specified and directed.

Glazed ceramic tiles in vertical surface 300 x 450 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface complete all as specified and directed.

Shingle filling in floors or pavings, laid in layers not exceeding 15 cm thick, spread, levelled, and blinded with earth and rammed including watering complete all as specified and directed.

Double charge vitrified ceramic tiles, area of each tile exceeding 0.36 Sqm but not exceeding 42 Sqm, 10 mm thick (square or rectangular) of superior quality as in floor and walls surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the light shade of tiles complete all as specified and directed.

All as per ser item No 180 above but on skirtings/dado/vertical surfaces of walls, complete all as specified and directed.

Dura stone tiles of size 305 mm x 305 mm x 10 mm thick as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the surface of tiles complete all as specified and directed. Note : Shade/colour as approved by GE.

Dismantling of plain or corrugated AC sheets/ steel sheetings any thicness as in roof coverings complete all as specified and directed.

6 mm thick non asbestos fibre cement building designer boards or tiles fixed in ceiling of size 600 mm x 600 mm panel confirming to IS 14862, including anodised aluminium snap grid frame work with size of grid 605 mm x 605 mm for seanless ceiling comprises of aluminium perimeter l section members, including fixing with 4 mm thich GI wire adjustable suspenders including all accessories complete all as specified and directed. Make : Everest.

50 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) area with 6 mm wide joints and 10 mm wide joints between the walls and plinth protection, finished even and smooth without using extra cement, outward slope of not less than 1:12, the joints shall be filled with mastic filling comprising one coat of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed.

Preparation of newly plastered surfaces of walls applying two coats of oil bound distamper over one coat of chalk whitening of desired finish as approved and complete all as specified and directed by Engr-in-Charge.

Mild steel window (Box type) factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and directed. Note : (i) The window shall be fabricated as per Drg CEUZ/TD/1269/2008 Sh 1/3 (ii) Glazing, wire gauge shall be measured and paid separately.

Mild steel ventilators (Box type) factory made with top hung shutters and bottom fixed type shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and directed. Note : (i) The window shall be fabricated as per Drg CEUZ/TD/1269/2008 Sh 1/3 (ii) Glazing, wire gauge shall be measured and paid separately.

Framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290.Gde-E-165 quality A including one shop coat of zinc chromate primer paint including preparation of surfaces at contractor's workshop before fabrication complete all as specified and directed.

4 mm thick glass sheet of ordinary quality not exceeding 0.5 Sqm in each pane complete all as specified and directed.

Preparation of newly steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Mild steel cold rolled butt hinges medium weight 100 mm long complete all as specified and directed.

10 mm thick rendering in CM 1:3 on roof surfaces, finished even and smooth without using extra cement complete all as specified and directed. Note :- Supply only water proofing compound shall be measured and paid seperately under the respective item.

Applying bituminous primer on roof surfaces @ 0.40 liters/Sqm and applying one coat of semi hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm and thereafter supply and laying 3mm thick polymeric water proofing membrane, five layered, of weight not less than 3 Kg per Sqm with centre layer core of 90 micron high molecular density polyethylene film and bonded completely to the surface with overlap of 10 cms (overlaps to be thermo fused by flame) followed by another coat of semi hot blown bitumen 85/25 grade bitumen @ 0.70 Kg/Sqm and provide aluminium paint as per manufacturing instruction complete all as specified and directed. Note:- Water proofing treatment will be done by IWL or through a specialized agancy.

20 mm dia, Ball brass, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

500 ltrs capacity rotational moulded polythylene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed in SSR Part I.

Supply only Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and directed.

Angle valve, cast copper alloy fancy type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified and directed.

Stop valve (concealed type), cast copper alloy fancy type, chromium plated with long shank and cup screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified and directed.

Brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.

100 mm dia cast iron sanitary connection pipe upto 300 mm length complete all as specified and directed.

Cast iron soil, waste and vent pipes (sand cast) 100 mm bore in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed.

Cast iron soil, waste and vent pipes (sand cast) 75 mm bore in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed.

Cast iron soil, waste and vent pipes (sand cast) 75 mm bore in any length with or without ears with cement joints fixed to wall complete all as specified and directed.

Cast iron bend (any radius) diminishing pieces or tapers 100 mm bore fitted with oval access door complete all as specified and directed.

Cast iron bend (any radius) diminishing pieces or tapers 75 mm bore fitted with oval access door complete all as specified and directed.

75 mm bore cast iron cowls complete all as specified and directed.

Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore complete all as specified and directed.

Vitreous china urinal partition white of size 310 x 700 mm about 40 cm above floor line complete all as specified and directed.

Stainless steel wall mounted cloth hanger with 6 peg set as approved and complete all as specified and directed by Engr-in-Charge.

Shower roses 15 mm chromium plated with or without swivel joints, any size, including 125 mm long arm and fixing to steel pipe or union complete all as specified and directed.

Removing excavated material (soils) exceeding 250 m but not exceeding 500 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Cement concrete 1:3:6 type C-1 (using 20 mm graded aggregate) as in surface channels and drains including necessary formwork etc. complete all as specified and directed.

150 mm bore Sail-glazed stoneware drain pipes laid in trenches and jointed complete all as specified and directed.

Cement concrete 1:4:8 type D-2 (using 40 mm graded aggregate) in bed to 150 mm dia pipes including packing under and haunching against the sides of pipes after they are laid and tested for complete all as specified and directed.

Providing cement concrete 1:2:4 type B-0 in steps, seismic and other similar bands, parapets and railings up to 60 cm in hieght, coping, kneeless apex stones, bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles complete all as specified and directed.

10 users capacity Septic tank, excavation in ordinary soil, PCC (1:2:4) as in foundation, brick work in CM (1:4), RCC cover slab, including RCC slab covers, vent shaft and sludge chamber etc. complete as shown in drg No. CE/TD-1202/2003 sheet No 1/2 and 2/2 dated 09-10-2003 and complete all as specified and directed.

Soakage well of size 1.20 x 3.00 Mtrs, excavation in ordinary soil, PCC (1:3:6) as in foundation, brick work in honey combing and solid in brick work in CM (1:4), RCC cover slab and filling with brick bats, RCC slab covers, etc. complete as shown in drg No. CE/TD-1202/2003 sheet No 1/2 and 2/2 dated 09-10-2003 and complete all as specified and directed.

Powder coated anodised aluminium frames for doors, windows, ventilators with one or more rebates including jointing cleats for fixing etc. complete all as specified and directed.

Powder coated aluminium anodised door shutters, aluminium section weighing 0.55 kg/m including necessary jointing cleat glazing clips, rubber packing, anodised aluminium snap beading screws etc. including all fittings. complete all as specified and directed.

Powder coated aluminium anodised window and ventilator shutters, side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary jointing cleat glazing clips, rubber packing, anodised aluminium snap beading screws etc. including all fittings. complete all as specified and directed.

Taking down carefully aluminium/copper point wiring complete with (light, fan, socket or power) complete fitting such as switch, sockets, ceiling rose, pendents sockets any type, rectangular board terminal boxes etc and making good disturbed surface of walls, and all as specified keeping aside serviceable item for re-use within the same bldg and removing unserviceable item from site complete all as specified and directed.

Point wiring for one light point/fan point/Bell ponit controlled by one switch with 1.5 sqmm PVC insulated FRLS unsheathed copper conductor single core multi stranded flexible copper cable in and including not less than 1.50 mm thick 20 mm dia & over concealed PVC non metallic rigid PVC conduit (ISI marked) with 1.5 mm thick pressed steel terminal boxes (modular type) concealed for fixing of modular switches/regulator etc. along with PVC insulated and insheathed FRLS 1.5 Sqmm multi stranded copper conductor cable (green color) as earth lead in and inculding PVC Concealed Conduit medium grade with all fitting (ISI make) complete all as specified and directed by Engr-in-Charge and including modular cover plate with frame, making good the disturbed surfaces to match with the existing specification. Make - Havells or equivalent make in polycab/finolex

All as per ser item No 224 but for 05 amp socket outlets point controlled by one switch on Independent board complete all as specified and directed. Make - Havells or equivalent make in polycab/finolex

All as per ser item No 224 but for 05 amp socket outlets point controlled by one switch on Same board complete all as specified and directed. Make - Havells or equivalent make in polycab/finolex

All as per ser item No 224 but for 3 pin 20 A socket outlet point controlled by one modular switch 20A on the independent Board with 2.5 sqmm size of copper cable as main and 2.5 sqmm copper cable as earth lead complete all as specified and directed.

Switch button single pole one way 5 amps 240 volt (Modular Type) with outer strip complete all as specified and directed. Make - Havells (crabtree)/phillips/Indoasian. Note - All modular cover plate/modular flush Box/Switch /Sockets Incorporated with this should be in same.

Switch piano fiush button single pole one way 20 amps 240 volt (Modular Type) with outer strip complete all as specified and directed. Make - Havells (crabtree)/phillips/Indoasian

Sockets combined 2-in-1, 3 pin 6 Amps, 240 Volt flush type (Modular Type) with outer strip complete all as specified and directed. Make - Havells (crabtree)/phillips/Indoasian

Sockets combined 2-in-1, 3 pin 20 Amps, 240 Volt flush type (Modular Type) with outer strip complete all as specified and directed. Make - Havells (crabtree)/phillips/Indoasian

Ceiling rose surface bakelite, 3 terminals complete all as specified and directed. Make - Havells/Indoasian

Replacement fan regulator 120W, 230V 50 C/S, deluxe Modular type electronic, step type hum free suitable control speed of fan from 0 to 100% and connecting electrically all as required or complete all as specified and directed by Engr-in-Charge. Make - Havells (crabtree)/phillips/Indoaisan

Taking down carefully existing ceilling/exaust fan any type sweep and removing fan blade including cleaning all dust particle and filling cavities with filler material complete and assemble the same along with all fixing connecting accessories and fixing the same position along with all new electrical wire connection complete all as specified and directed.

Slim linear LED tube light fixture 20 Watt, with T8 polycarbonate 6500k Housing made of extruded AL with lumen O/P should not be less than 100 lum/watt making all connection using 1.5 Sqmm copper conductor multistranded PVC insulated 3 core flexible cable from ceiling rose to fitting drawn through PVC flexible conduit complete all as specified and directed. Make - Havells Cat Part No - (E-Lite LED Pride Plus Neo) LHEXACP7UN1W020 or equivalent make in Philips/Polycab

Wall mounted luminaire suitable for 1x9 W LED lamp B22 base cap (Including 1x9 watt LED Warm white lamp) complete making all connection using 1.5 Sqmm copper conductor multistarnd PVC insulated 3 core flexible cable complete all as per the directions of Engr-in- Charge. Make - Havells (Beetle) Cat Part No -LHDL07150099 or equivalent make in Philips/Polycab

Slim linear LED lighting fixture 5 Watt LED Batten, For mirror light purpose, Complete making all connection using 1.5 sqmm copper conductor multistarnd PVC insulated 3 core flexible cable from ceiling rose to fitting complete all as per the directions of Engr-in- Charge. Make - Havells (E-Lite LED Pride Plus Neo) LHEXBTP7IN1W005 or equivalent make in Philips/Polycab/Cromton

10 watt LED hexagon bulk head, IP66, Environmental friendly, ultra modern, energy saving, surface mounted, complete making all connection using 1.5 sqmm copper conductor multistarnd PVC insulated 3 core flexible cable complete all as per the directions of Engr-in- Charge. Make - Havells (Hexa 10 W) Cat Part No - HEXAFT10WLED857SSYMBOPC or equivalent make in Philips/Polycab

Replacement MCB single pole 240 volt any rating from 10 to 32 amps, B-Series, with rupturing capacity 10 KA, inculding providing aluminium thimble for out going cable complete all as specified and directed. Make - Schneider (Acti-9)/Siemens (Betagard-8GB32)/Havells.

Replacement MCB Single Pole & Neutral 240 volt any rating from 40 to 63 amps, B-series, with rupturing capacity 10 KA, inculding providing aluminium thimble for out going cable complete all as specified and directed. Make - Schneider (Acti-9)/Siemens (Betagard-8GB32)/Havells.

Replacement MCB TPN 240 volt any rating 63 amp with rupturing capacity 10 KA, inculding providing aluminium thimble for out going cable complete all as specified and directed. Make - Legrand (DX3)/Schneider (Acti-9)/ Siemens (Betagard-8GB32)

Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Note - MCBs will be measured separately

Sheet metal enclosure MCB distribution board, Triple pole & neutral 415 volts 4 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Make - Havells/ Schneider/L&T. Note - MCBs will be measured separately.

Replacement of Sheet metal enclouser single pole and neutral with 2 pin and earth plug and socket 20A 240V complete with one single pole MCB of any cap from 10Amp to 20Amp, 10KA complete all as specified and directed. Make - Havells/Schneider/L&T

Earthing complete with galvanised steel earth plate electode 600 mm x 600 mm x 6.00 mm thick burried directly in ground (earth pit not less than 2.25 meter deep below normal ground level connected to and including galvanised steel earth lead wire 4 mm dia by means of bolts, nuts, chock, nuts and washers of galvanised iron or steel including PCC Pit in 1:2:4 type B-1 angle iron frame with RCC cover and handle, excavation and earth work in any type of soil medium grade GI watering pipe 20 mm bore with funnel and wire mash and light grade GI protection pipe 15 mm bore upto main board complete all as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected to main control board as specified and testing completion complete all as specified and directed.

Testing cable XLPE insulated screened PVC bedded galvanized steel strip or wire armoured, electric power cable heavy duty 1100 volts grade with stranded aluminium conductor of sizes 16 Sqmm 4 core complete all as specified and directed. Make - Havells /Rallison/Polycab/Finolex.

Brick covering width equal to length of brick for mechanical protection to cable with well burnt sub class 'B' bricks laid dry flat complete all as specified and directed by Engr-in-Charge.

Sand cushioning for under ground cable provided with a layers of 8 mm high before laying cable and 15 mm thick after laying and stretching the cable complete all as specified and directed by Engr-in-Charge.

Steel water tubing, light grade, galvanised with all fittings laid in trenches complete with all fitting and all accessories (Including Tee, bends, washers, union etc.) of size 25 mm bore complete all as specified and directed. Make - Jindal/Tata/swastik

Submain wiring with two single core PVC insulated unsheathed, FRLS flexible copper conductor cable of size 10 sqmm and one single core PVC insulated unsheathed, FRLS flexible copper conductor cable of size 6.0 sqmm as earth lead in & inculding PVC casing /non metallic rigide PVC conduit medium grade and making good the distured at site or complete all as specified and directed by Engr-in-Charge. Make - Havells or equivalent make in polycab/finolex.

Exhaust fan star rated 300 mm sweep, 1400 RPM, 230 volts single phase with complete louvers, hanging in position and connecting to electric system using PVC insulated and overall sheathed flexible copper conductor cable 3 core of size 23/0.0076 and testing complete all as specified and directed by Engr-in-Charge. Make - Havells (Turbo force SP, Metallic body) or equivalent make in Khaitan/Bajaj

LED street Light fitting 35 Watt, New generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 with acrylic, with Heat resistant toughened Glass, Corrosion resistant, complete making all connection with MCB SPN alongwith MCB Box enclosure complete all as per the directions of Engr-in-Charge. Make - Havells, Cat Part No - LHETBXU7PAIS035 (ENDURA CITYLITE PLATINUM PLUS )

Street light Bracket complete made of GI pipe of suitable size, medium grade 1.2 m long bent to shape as per site requirement along with MS flat iron clamps with nuts, bolts, washers including grouting the same with wall complete all as specified and directed by Engr-in-Charge.

RAMAN CONSTRUCTION CO

SINGH CONST CO

s l sharma and sons

paras ram pachiala