Recall Titoli- Estimate for Provi...

Amount

Supply, erection, testing and commissioning of wall mounted electrical LT Panel board, fabricated from 16 SWG CRCA sheet duly stouten with suitable angle iron frame work and completely powder coated of suitable size deep having following items for Horizontal Pumping sets (6500 LPM X 45 MTR HEAD) a) Main switch suitable ampere 1 No. (LandT Siemens, ABB) b) CT 100/3 = 1 Nos. (AE/ KAPPA/ LandT) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, star delta 1 No (LandT Siemens, ABB) f) VSS 1 No. and ASS 1 Nos. of approved make. g) Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each)

Providing and Fixing of Copper Cable 16 Sqm with 3.5 core for Clear Water

Provision for providing and fixing of 35 sqm 3.5 core for Clear Water Pump Sets.

Supply, erection, testing and commissioning of wall mounted electrical LT Panel board, fabricated from 16 SWG CRCA sheet duly stouten with suitable angle iron frame work and completely powder coated of suitable size deep having following items for Horizontal Pumping sets (1300 LPM X 12.5 MTR HEAD) a) Main switch suitable ampere 1 No. (LandT Siemens, ABB) b) CT 100/3 = 1 Nos. (AE/ KAPPA/ LandT) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, star delta 1 No (LandT Siemens, ABB) f) VSS 1 No. and ASS 1 Nos. of approved make. g) Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each)

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : Make IVC/VAG (500 mm i/d )

Supply, erection, testing and commissioning of wall mounted electrical LT Panel board, fabricated from 16 SWG CRCA sheet duly stouten with suitable angle iron frame work and completely powder coated of suitable size deep having following items for Horizontal Pumping sets (1900 LPM 12.5 MTR HEAD) a) Main switch suitable ampere 1 No. (LandT Siemens, ABB) b) CT 100/3 = 1 Nos. (AE/ KAPPA/ LandT) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, star delta 1 No (LandT Siemens, ABB) f) VSS 1 No. and ASS 1 Nos. of approved make. g) Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each)

Raw Water Horizontal Split Casing type Pumping set with electric driven motor 1300 LPM X 12.50 Mtr. Head X 7.5 BHP

Supply, erection, testing and commissioning of wall mounted electrical LT Panel board, fabricated from 16 SWG CRCA sheet duly stouten with suitable angle iron frame work and completely powder coated of suitable size deep having following items for 2 Nos. Horizontal Pumping sets (800 LPM, 40 Mtr. Head 10 BHP) a) Main switch suitable ampere 1 No. (LandT Siemens, ABB) b) CT 100/3 = 1 Nos. (AE/ KAPPA/ LandT) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, star delta 1 No (LandT Siemens, ABB) f) VSS 1 No. and ASS 1 Nos. of approved make. g) Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each)

Providing and fixing of copper cable 6 sqm with 3.5 core for Clear water pump sets.

Provision for Sluice Valve in pipeline of IVC make PN 1.6 complete in all respects. 350 mm i/d

Provision for Sluice Valve in pipeline of IVC make PN 1.6 complete in all respects. 400 mm i/d

Prov of S.V. complete including chamber surface boxes etc. 150 mm

Prov of S.V. complete including chamber surface boxes etc. 100 mm

Prov of S.V. complete including chamber surface boxes etc. 200 mm

WATER TREATMENT PLANT (WTP) Design, construction, testing and commissioning of 1.00 MLD capacity Water treatment plant including inlet channel, Alum dozing, Flash mixing, Clarifloculator, filter box, over head Reservoir for back wash, waste water tank including all civil work, pumping machineries and electric cabling, control panels, entire piping network of suitable size laying the DI pipe from raw water pump to inlet box of WTP, WTP to CWT and Suction Well for CW including DI specials, suitable size Sluice valves, Hodies, manhole covers, air scour equipment, chemical house including chlorination equipment and arrangement of flow measurement and sand bed complete in all respects as per NIT (Sluice valves of make IVCAWAG).

SITC of Air valve in pipeline IVC PN-16

Provision for Providing and Fixing of Raw Water Horizontal Split Casing type Pumping Set with electric driven motor for W/W having discharge 1900 LPM with 12.5 Mtr. Head and 10 BHP.

Raw Water Pumping Machinery:- Supply, Erection, testing and commissioning of Horizontal Motor Pumping Set for Raw Water Having Head as per the Indicated Requirements of Discharge in LPM and Power capacity in BHP as per IS marked Complete in all respect . 6500 LPM 45 Mtr. Head 110 BHP

Providing and installation of 150 sqmm 3 core XLPE unarmored Cable for suitable 11 KV HT with aluminum conductor including carriage and all taxes complete in all respect.

NRV: Supplying,fixing, testing and commissioning of CI swing check type reflux valve (non returned valve) PN 1.6 including cost of jointing material complete in all respect.( IVC / VAG , Kirloskar make) 400 MM

H.T. Meter: Supply and erection of HT metering panle including suitable size 11 KV HT XLPE alluminium armored cable network from G.O. Switch to H.T. Metering equipment and from H.T. Metering to Transformer Main to L.T. Panel earthling, safety equipment, fenced enclosure for transformer, and any other contingent thereto complete in all respect as per approved make and directions of Engineer-in charge and getting it passed from Chief Electrical Officer.

Prov. and installation of 240 sqmm 3 core XLPE unarmored Cable for suitable 11 KV HT with aluminum conductor including carriage and all taxes complete in all respect.

Providing and installation of copper Cable 95 Sqmm 3.5 core copper Cable for Pumps.

Prov. and installation of 16 sqmm 3 core XLPE unarmored Cable for suitable 11 KV HT with aluminum conductor including carriage and all taxes complete in all respect.

Operation and Maintenance for complete scope of work mentioned in the DNIT including existing Boosting Station (Disinfection material supplied by PHED) as per schedule-IV for a period of 5 year after 12 month during defect liability period and 03 Months trial run will be charged to the A/Mtc. estimate complete in all respect as per approved NIT i) Operation and Maintenance during defect liability period (Operation only) after 3 month trial run.

ii) Operation and Maintenance during 1st year after defect liability period

Operation and Maintenance during 2nd year.

iv) Operation and Maintenance during 3rd year.

v) Operation and Maintenance during 4th year.

vi) Operation and Maintenance during 5th year.

Bidder Name

Amount

Lalit Kumar(GSTN-06ALGPB5309Q1ZY)