Improvement of road from Satwari Chowk to Kunjwani by way of filling of pot holes in patches and stretches (2nd Call)

Amount

Providing, laying, spreading and compacting crushed graded aggregates and Granular material, premixed with water in mechanical wet mix plant of 75 Ton capacity, carriage of mix material to site by tipper, laying in two uniform layers having compacted avg. thickness of 75mm each with motor grader of adequate capacity, its blade having hydraulic control suitable for adjustment or with paver finisher in sub base / base course on well prepared sub grade and compacting with vibratory roller (80-100 KN) to achieve the desired density and laid to lines, grades and cross sections as approved by Engineer-in-charges, as per MORT&H specifications complete including filling of ruts / dips in the sub grade with the same material and all sort of taxes including all leads, lifts carriage complete (quantity for filling of ruts and dips will not be measured and paid for separately).

Providing and laying 50mm thick (Compacted) avg. premix bituminous macadam base course with stone aggregate of quality, size and grading as specified in latest MORT&H specifications and straight run bitumen of VG-30 @ 3.5% by weight of total mix including Hot mixing of stone aggregates and bitumen in Hot Mix Plant, Transporting mixed material to the site & laying with paver finisher as per required profile, including cost of priming coat / tack coat and Bituminous Macadam in required level and grade, rolling with roller 8 to 10 tonne capacity to achieve the required compaction and density all complete including cost of bitumen and all sort of taxes including all leads, lifts, carriage complete.

2.5 cm premix carpet surfacing with 2.25cum and 1.12 cum of stone chippings of 13.2 mm size and 11.2 size respectively, per 100 sqm and 52kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively including a tack coat with hot straight run bitumen, including consolidation with road roller of 6 to 9 tonne capacity etc. complete including tack coat and seal coat with paving Asphalt grade VG-30 with no solvent (Complete job).

Carriage of material by Mechanical Transport including loading / unloading and stacking at site complete.

Stone agg./Screening / Crusher Dust / Sand for an avg. lead of 10 Kms.

M/s Sanjeev Chauhan