Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.6 LAccepted-AOC HOUSE NO 84 SATGAON AMSING JORABAT GUWAHATI KAMRUP METRO ASSAM 781027 | KAMRUP METRO | ASSAM | 781027 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹43.9 L+₹4.0 L (10.0%)Rejected-Finance OIL INDIA LTD GATE NO 02 PO UDAYAN VIHAR GUWAHATI ASSAM | KAMRUP METRO | ASSAM | 781001 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹46.0 L+₹6.1 L (15.2%)Rejected-Finance 0 BINOVA NAGAR KAMRUP ASSAM 781018 UDYAM AS 03 0029196 | KAMRUP METRO | ASSAM | 781018 | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹46.1 L+₹6.2 L (15.5%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹46.6 L+₹6.6 L (16.6%)Rejected-Finance H NO 18 BY LANE NO 09 SATGAON PRAGATI NAGAR GUWAHATI ASSAM 781171 | KAMRUP METRO | ASSAM | 781171 | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹45.0 L
EMD Value
₹89,900
Closing Date
29 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Narangi
GE Narangi C/o 99 APO
CERTAIN MISC REPAIRS TO VARIOUS MES INSTALLATION AND OTM ACCN AT BHAGAT MARG UNDER GE NARANGI
2023_MES_593921_1
8858/B/E8
Open Tender
Civil Works
Item Rate
180 days
GE Narangi
As per tender documents
8 documents required · 8 mandatory
₹500
Yes
GE Narangi
₹89,900
Yes
21 Jun 2023
9 May 2023
31 May 2023
9 May 2023
29 May 2023
22 May 2023
Amount
Demolition of plain cement concrete (Un-reinforced) in ground floors and paving exc 15cm thickness (below or above ground level) including removal of spoils/ demolished materials not exceeding 50m and depositing complete all as specified and directed.
Dismantling of asbestos cement sheet (corrugated or semi corrugated etc) as in roof covering complete all as specified and as directed.
M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets fixed with L-type or J-type or cranked hook bolts in roofs/ walls etc.complete all as specified & as directed.
Refixing only asbestos cement (corrugated, semi corrugated, etc.) fixed with L-type or J-type or cranked hook bolts in roofs,/walls etc.complete all as specified & as directed.(NOTE; serviceable sheet shall be obtained from dismantling of old sheet here in before.)
M&L 6mm thick asbestos cement two piece adjustable serrated ridge for corrugated or semi corrugated sheets.fixed with L-type or J-type or cranked hook bolts with washer in roofs/ walls etc.complete all as specified & as directed
Dismantling of plain or corrugated steel sheeting, any gauge or any thickness as in roof covering, wall cladding etc., complete all as specified and as directed.
M&L Pre- painted hot dip aluminium Zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws complete all as specified and as directed.
M&L Pre- painted hot dip aluminium Zinc alloy metalic coated plain steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws as specified complete all as specified and as directed. Note: To be executed for provision of ridges valley and hips.
S&F 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap, fixed with 'L' type or 'J' type or cranked hook bolts and washers, in roof covering, walls cladding etc, with grade of zinc coating 275 complete all as specified and as directed.
S&F 0.63 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed.
S&F in repairs, suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick High Pressure stean Crude Everest Non Asbestos Fiber Cement plain Board (E-Board Classic) in & including a grid of GI system duly suspended with 4mm dia GI wire hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm grid complete all as specified and as directed.
M & L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.
M&L for 25mm thick PCC 1:2:4 Type B-1 (using 20mm graded crushed stone aggregate) as in levelling course complete all as specified and as directed.
M&L for 75mm thick PCC 1:2:4 Type B-0 (using 12.5mm graded crushed stone aggregate) as in path/paving/ hard standing and finishing the surfaces even and fair without using extra cement complete all as specified and as directed.
M&L in repair 25mm thick 1:2:4 type B-0 precast cement concrete louvers and jallies ( measured solid) as directed including all mouldings but excluding frame set in CM 1 :4 complete all as specified and directed.
Demolition of brick or stone masonry work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.
M & L for brick work with sub class B bricks old size (locally available best quality) straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed.
All as per item No. 17 above but except bricks. ( Serviceable bricks shall be obtained from demolition of old brick work) complete all as specified and as directed.
M & L for half brick work with sub class 'B' bricks old size (locally available best quality) straight or curved on plan to any radius, built in cement mortar 1:4 complete all as specified and as directed.
Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.
M&L for 15mm thick rendering in cement mortar (1:4), in two layers, under coat of 10 mm thick & top of 5 mm thick, to fair faces of brick or concrete wall surfaces, top layer 5 mm thick mixed with liquid water proofing compound @ 200 ml per 50 kg of cement or as per manufacture's instructions), finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound to be measured and paid separately as "Supply only".
M & L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and as directed
M & L for rendering 15 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and as directed
Supply only liquid water proofing compound complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.
M&L for Complete removal of existing treatment of ceiling surfaces and applying two coats of white wash complete all as specified and as directed.
M&L for Complete removal of existing treatment of wall surfaces and applying two coats of exterior weather coat paint over a coat of primer complete all as specified and as directed.
M&L for Complete removal of existing treatment of wall surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.
M & L for complete removal of old treated surfaces on walls and applying one coat of alkali resistant primer and a coat of 1 mm thick (average) white cement putty ,sanding the surfaces till smooth finish is obtained and finally applying two coats of cement based paint complete all as specified and as directed.
M&L for preparation of new wood or wood based surface of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and as directed
M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide, zinc chrome primer complete all as specified and as directed.
M & L for preparation of old wooden surface over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L in repair for Granite work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like with and including 20 mm bedding in CM 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match the colour of tiles etc complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing complete all as specified and directed.
M & L for coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
M & L for vitrified ceramic tiles, light shade, 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, as in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
M & L for vitrified ceramic tiles, light shade, 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, laid in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
M&L for glazed ceramic coloured tiles 300mmx450mmx 7mm thick, set and jointed in neat cement slurry and pointed in coloured cement as in vertical surfaces such as skirting, dados and risers to steps over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed.
M&L for machine cut kota stone slab flooring 18 to 20 mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab laid over and including 20 mm thick screed in cement mortar (1:4) with rubbing and polishing including demolition of old slab/tiles of any description complete all as specified and as directed.
M&L for pre polished chequered cement concrete tiles in floor, area exc 0.06 Sqm but not exc 0.11 Sqm, 25 mm thick with white cement and pigments of approved make jointed with cement slurry and pointed with white cement mixed with colour pigment to match with the tiles over and including screed bed of 20 mm thick cement mortar (1:4) including dismantling of old tiles of any description complete all as specified and as directed.
M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with 30mm thick sand cushion including filling the joints with sand including demolition of old slab/tiles etc. complete all as specified & as directed.
Dismantling wrought iron or mild steel work of any description not otherwise complete all as specified and as directed.
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified & as directed.
S&F rolled mild steel plates ( plain or chequrred) channels, square cut or notched ( ordinary or counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified & as directed.
S&F rolled mild steel framed works as in doors or gates of angle or other section with gusset plates,, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hangings also fastening and fixing etcconforming to Fe.410-W ( Gde E-250) quality B complete all as spoecified and directed..
Dismantling.posts or struts of any section Wood, steel or RCC),embeded in natural ground ,including taking out embedded portion and making good disturbed ground complete all as specified and directed.
Dismantling.posts or struts of any section Wood, steel or RCC),embeded in concrete ,including taking out embedded portion and making good disturbed ground complete all as specified and directed.
Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surfaces in soft/loose soil complete all as specified & as directed.
M&L PCC (1:2:4) type B-2 (using 40 mm graded stone aggregate) in foundation filliing and mass concrete complete all as specified and as directed.
M&L mils steel angle iron posts and strurts in fencing including cutting tops to shape, drilling holes , notching for wire etc . Including all necessary drilling, bolting or rivetting and similar work confirming to Fe-290 Gdw E-165 complete all as specified and directed.
M&L for TMT bars10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified & as directed.
M&L for TMT 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally as in stirrups , spacers and binders including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified & as directed.
M&L RCC 1:2:4 type B-1 as in precast posts, fencing posts, staining or terminal posts, struts etc. for fencing average sectional area not exceeding 100 sqcm with or without chamfered angles and flat, splayed, rounded, or mitred tops as directed and fixed .
Dismantling fencing wire of any size and description complete.
Supply only chain link fencing wire mesh of 100X100mm size or type, made with 4 mm dia mild steel galvanised wire complete all as specified and as directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolt etc including provision of binding wire complete all as specified and as directed
S & F in repairs galvanized two strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia bars at 75 mm spacing and straining and fixing to RCC / steel post etc., including securing or tying at crossing with and providing of galvanized mild steel wire, staples or steel pins, etc., (each line of wire to be measured separately) complete all as specified and as directed.
Taking down chowkats with shutters including builders hardware(without taking off shutters from the frame) area n.exc. 1.5 Sqm each complete all as specified and as directed.
Taking down chowkats or frames area exceeding 1.5 Sqm but not exceeding 4 Sqm each including shutter with builders hardware (without taking off shutters from the frame) complete all as specified and as directed.
Taking down shutter of any description area n.exc 1 sqm each including builders hardware and refixing in the same opening complete all as specified and as directed.
Taking down shutter of any description exc 1 Sqm but n exc 2 Sqm each builders hardware and refixing in the same opening complete all as specified and directed.
M&L for 1.25mm thick mild steel pressed steel frames of size 105x60mm for doors with single rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.
Dismantling timber scantlings 40 sq. cm and over in section (unframed work), in any position complete all as specified & as directed.
M & L second class hard wood scantling fixed in clean sawn complete all as specified and as directed
M & L for 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.
S & F 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (with out sash bar), edges of framing with plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and as directed.
S&F 30mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc with plain, chamfered or rounded, mitred beads (with sash bars) for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (b) complete all as specified and directed.
S&F 30mm thick flush shutter, solid core construction with particle board core and plywood face panel, commercial type on both side complete all as specified and directed.
S&F aluminium anodised sliding glazed window shutter ( double leaf glazed shutter and single leaf mosquito proof shutter each in single frame work) without sash bars with anodised aluminium shutter of section 40mmX20mmX1.10mm thick and window chowkat of section 92.00mmX29.50mmX1.20mm thick including necessary jointing clips, glazing clips, rubber packing, snap beading , screws, handle, tower bolts and locking arrangements etc including 4mm thick sheet glass tinted quality on panel and stainless steel wirecloth or aluminium anodised wire cloth for mosquitto proofing, 0.45mm nominal dia and average width of aperture 1.40mm fixed with aluminium screws and tacks and making good disturbed surfaces complete all as specified and as directed.
S & F anodized aluminium push pull typepartly panelled and partly glazed dooor shutter ( single leaf/ double leaf) including necessary jointing cleats, glazing clips, rubber packing, snap beading, screws, handle, locking arrangement, 5.5 mm thick float glass tinted quality on top panels and 12mm thick prelaminated particle board interior grade pre laminated with decorative face lamination both sides on bottom panel including aluminium door closer complete all as specified and as directed. Aluminium sections : 'A' series (i) Top, , bottom and Lock rails :- 85.00 mm x 44.45 mm x 2.00 mm thick (ii) Shutter vertical rail : 44.45 mm x 44.45 mm x 2.00 mm thick (iii) Chowkats :- 63.50 mm x 33.10 mm x 2.5 mm thick
S & F factory made solid PVC door frame of size 50mm x 47mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.
S&F factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specfication, drawing and complete all as specified and as directed.
S&F steel window with side hung shutter glazed/gaiged shutter ibncluding both side openable ( outsude glazed window and inside fly proof window) including box type hinges with steel handle and steel peg stay complete with glazing bars and 12 mm square bar or round bar of approved design welded to steel window frame dovetailed or welded complete all as specified and directed.( Guard bar or square bar shall be measured and paid seperately).
S & F steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay with glazing bars and 12 mm square bar or ground bar of approved design welded to steel window frame dovetailed or welded complete all as specified and as directed.
S & F steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete all as specified and as directed.
S&F steel ventilators with top hung shutters including hinges , steel peg stay complete all as specified & as directed .
S&FMild steel framed work such as grills,gratings,etc.with ends of bars shouldered and/or riveted,or forged into spikes,framed guard bars, barred iron doors,ladders, framed balusters, walk ways,railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165.
M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in fixing of hold fast or bed block complete all as specified and directed.
S & F 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S & F 100 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 150 mm extruded aluminum alloy handles, fabricated type, anodized all as specified and directed.
S&F 100 mm extruded aluminum alloy handles, fabricated type, anodized all as specified and directed.
S & F Mild Steel butt hinges 100 mm size, medium weight cold rolled and fixed complete all as specified and as directed.
S & F Mild Steel butt hinges 75mm size, medium weight cold rolled and fixed complete all as specified and as directed.
S & F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.
S&F in repair Aluminium body ( extruded section) Door closure hydraulically regulated designation no.3 universal type suitable for door shutters of 851to 1000mm in width and weight between 61 to 80 Kg and fixed complete all as specified and directed.
S&F in repair brass locking arrangement with two levers morice lock of approved make, vertical type complete all as specified and directed.
S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box , main body with stainless steel cover governing pivot made of brass , other parts made of mild steel heavy duty complete all as specified and directed .
M&L in repair 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination,fixed with screws to timber frame work complete all as specified and directed.
M&L in repair for seccond class hard wood weather boarding , clean sawn, plain 19/20mm thick or feather edged 15/20mm thick and fixed with 30mm laps complete all as specified and as directed.
Taking down eaves gutter and rain water pipe ( any size or pattern) including all fittings, heads, shoes, bends, swan necks, etc. including cleaning and refixing or removal to store ( measured overall as fixed along the centre line over fittings and acessories complete all as specified and directed.
S&F stain less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or aluminum wire staples complete all as specified and directed.
Taking down steel sliding shutter, area of each shutter exceeding 10 and not exceeding 20.00 sqm each of any type and description and carrying out neccessary repair/ replacement work to defective components such as sliding system and pulling system, and reassembling the rolling shutter including greasing, welding, drilling where required and refixing the shutter in the existing location and making functional to the entire satisfaction of the Engineer in charge complete all as directed. ( Note: The materials replaced under this item shall be measured and paid seperately as " Supply only" under relevent items of this schedule. The shutter shall be removed carefully alongwith its accessories without damaging the adjacent structure. All the defective parts to be repaired/ replaced under this item shall lay out at site for proper verification and approval of the Engineer in charge and shall be repaired /Replaced only after prior approval of the Engineer in charge. Necessary greasing easing will be done to the appropriate parts/ spares/ fixtures for smooth functioning of the shutter.
Taking down steel rolling shutter, area of each shutter not exceeding 10.00 sqm each of any type and description including cover, anchoring rod, manual / gear operated type and carrying out neccessary repair/ replacement work to defective components such as pulling system , locking plate, guide channel, bracelet plate etc and reassembling the rolling shutter including greasing, welding, drilling where required and refixing the shutter in the existing location and making functional to the entire satisfaction of the Engineer in charge complete all as directed. ( Note: The materials replaced under this item shall be measured and paid seperately as " Supply only" under relevent items of this schedule. The shutter shall be removed carefully alongwith its accessories without damaging the adjacent structure. All the defective parts to be repaired/ replaced under this item shall lay out at site for proper verification and approval of the Engineer in charge and shall be repaired /Replaced only after prior approval of the Engineer in charge. Necessary greasing easing will be done to the appropriate parts/ spares/ fixtures for smooth functioning of the shutter.
Supply only 100mm dia, 450mm long, SWG 'O' high tensile spring, thickness not less than 8mm size conforming to relevent IS complete all as specified and as directed.
Supply only roller of steel pipe ( shaft) heavy duty of size 50mm nominal bore complete all as specified and as directed.
Supply only ball bearing No. 6213/6214 complete all as specified and as directed.
Supply only locking plate made of 3.15mm thick mild steel reinforced with mild steel angle section of size 35x35x5mm complete all as specified and as directed.
Supply only guide channel made of mild steel deep channel section not less than 3.15mm thick and depth of channel 75mm complete all as specified and as directed.
Supply only mild steel clip suitable for rivetting to lath curtain complete all as specified and as directed.
Supply only mild steel wheel of size 100x50mm in top rail complete all as specified and as directed.
Supply only mild steel wheel of size 50x25mm in bottom rail complete all as specified and as directed.
S&F 1.00mm thick mild steel plain black sheet in hearths, covering to door shutters, chowkats ( frames) , chullah hoods, water tanks, water troughs, ducts , urinal troughs and funnels etc. cut to size, edges beaded if directed, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel members etc. with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, as required complete all as specified and as directed.
S&F in repairs mild steel PVC coated coloured 25mm dia drapery rod for curtains including decorative end holders and brackets ( wall to wall or flush to wall) for securing curtain rod complete all as specified and directed
Hacking out old broken glass (any thickness, quality or description) from wooden/steel frame or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.
S & F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.
S & F 4mm thick frosted glass, glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.
S & F 3 mm thick figured glass, pin head type and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.
Taking up or down 15 mm bore GI tubing from trenches / wall including all fittings segregated, cleaning and stacking the pipe for reuse at site if required complete all as specified and as directed. Note : Excavation and earthwork if any shall be included in the quoted rate
S & F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
Refixing old serviceable 15 mm bore steel tubing and connections as obtained from taking down including provision of new fittings, in new or old position of walls, ceiling, floor etc. complete all as specified and as directed.
Taking up or down 20 mm bore GI tubing from trenches / wall including all fittings segregated, cleaning and stacking the pipe for reuse at site if required complete all as specified and as directed. Note : Excavation and earthwork if any shall be included in the quoted rate.
S & F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
Refixing only old serviceable 20 mm bore Steel tubing and connections as obtained from taking up/down old steel tubing including provision of new fittings in new or old position to walls,ceiling, flooring etc. complete all as specified and as directed.
S & F in repairs, bib taps, 15mm dia cast copper alloy chromium plated, fancy type with crutch or butter- fly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.
S & F in repairs, stop valves/ angular stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.
S & F 500 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc including dismantling of old tank of any description complete all as specified and directed.
S & F 1000 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc including dismantling of old tank of any description complete all as specified and directed.
Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc of capacity upto 1000 litrs complete all as specified and as directed.
S & F in repairs, round moulded PVC water tank lid for 500&1000 litres tank complete all as specified and as directed.
S & F in repairs, 15 mm bore pillar taps, cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.
S & F in repairs, stop valves 15 mm bore, chromium plated with long shank and cup (concealed type) cast copper alloy complete all as specified and as directed.
S&F in repairs, 125 mm dia, chromium plated swivel type shower rose with 195 mm long chromium plated shower arm and wall flange suitable for fixing 15 mm bore steel tubing all as specified and as directed.
S&F in repairs, 15 mm dia 600 mm long PVC connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and as directed.
S&F in repair vitreous china urinal half stall type white ( excluding flushing cistern) including urinal spreader, PVC connection, 40mm PVC waste pipe with CP waste coupling 40mm providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement etc complete all as specified and directed.
S & F in repairs, vitreous china wash hand basin, white flat back size 550 mm x 400 mm including brackets including pillar tap, 15 mm bore chromium plated, cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe,15mm dia PVC connection pipe complete all as specified and as directed
S & F in repairs, 10 Litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float ,32 mm pvc flush pipe suitable size and handle including brackets etc complete all as specified and as directed.
S & F in repairs, Vitreous China Squatting Pan"Orissa pattern" size 580 mmx440 mm white with integral foot rest etc. ( excluding cistern and flush pipe) including S or P Trap and provision of concrete bedding and making good to floor complete all as specified and as directed.
S & F in repairs, vitreous china wash down water closet (padestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for padestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed.
S & F in repairs, health faucet ABS with 1.2m SS flexible tube and ABS wall hook fixed with necessary fixers complete all as specified and as directed.
S&F in repair plastic water closet seat, white, closed pattern with flat bottom and cover with mild steel chromium plated or aluminium hinging device complete all as specified & as directed.
S & F in repairs, sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortat to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.
S & F in repairs, stainless steel kitchen rack made of 0.63mm thick stainless steel sheet of size,600mmX900mmX250mm fixed to wall with screws complete all as specified and as directed.
S&F in repairs 110 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or in floor as in waste/soil pipe etc complete all as specified and directed
S&F 110mm dia PVC (SWR) bends of any radius complete all as specified and as directed.
S. R. TRADING
KAMAKHYA CONSTRUCTION & BUILDERS
DEE PEE ENTERPRISE
SHANKAR ENTERPRISE
M/s DEBOJIT ROY
Goswami Traders
V.V.Construction
MAC ENGINEERS
Ms Sukumar Talukdar and Co.
SANDIP BARUAH
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .