PROVN OF TOILET BLOCKS NEAR BLDG NO P 22 AND SPECIAL REPAIR / REPLACEMENT OF LT OVERHEAD INFRASTRUCTURE WITH UNDERGROUND CABLE (SECTOR A AND B) UNDER GE(N) PATIALA

Amount

Surface dressing in soft/loose soil n exc 15 cm deep trimming of natural ground (removing vegetation/shurbs/ brushwood. Undergrowth and carring away rubbish to a distance of 50 metre complete all as specified and directed.

Excavation in trenches n,exc 1.5 mtr deep & wide and getting out in any type of soil and n.exc 10 sqm on plan complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggt) as in foundation, filling, mass concrete complet all as specified and directed.

M&L mild steel TMT bar 10 mm dia or above as in reinforcement cut to length bend to shape required and binding with and incl mild steel wire (annealed ) not less than 0.9 mm dia complete all as specified and directed.

M&L mild steel TMT bar 6mm to 8mm dia or above as in reinforcement cut to length bend to shape required and binding with and incl mild steel wire (annealed ) not less than 0.9 mm dia complete all as specified and directed.

M&L for Mild steel TMT bar 8 mm dia as in stirrups incl bending and binding with and incl mild steel wire not less than 0.9 mm dia complete all as specified and directed.

M&L for use and waste for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter,surface finished fair complete all as specified and directed.

M&L for use and waste of Formwork, rough finished to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping)

M&L for use and waste of Formwork, rough finished to sides and soffits of floor or roof beams, beam haunching girders, bressummers,lintels, cantilevers, shelves including supports,overhangs etc. also splays between floors and beams, etc.

M&L, Form work to sides of pillars posts, struts, piers, columns & stanchions square rectangular or polygonal rough finished surfaces in shape all as specified & as directed

M&L for use and waste for Form work, fair finished to edges of concrete flats, treads, breaks in floors,window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm

M & L for providing reinforced cement concrete M-25 design mix using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc complete all as specified and as directed

M & L for providing reinforced cement concrete M-25 design mix, using 20 mm graded stone aggregate as in columns, pillars, piers, posts and struts etc complete all as specified and as directed

M & L for providing reinforced cement concrete M-25 design mix using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and the like complete all as specified and directed.

M & L for providing reinforced cement concrete M-25 design mix in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed

Returning ,filling in ,including ,spreading , levelling , watering and well ramming in layers n, exc, 25 cm complete all as specified and as directed

Removing excavated material n. exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed .

M&L brick work with old size bricks straight or curved on plan exc 6m mean radius built in CM (1:6) cmplete all as specified.

M&L half brick thick brick work with sub class "B" bricks straigth or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified.

M&L Damp proof course 40mm thick In cement concrete 1:2:4 type B-0 ,to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

Filling under floor with excavated soil as required from item No 2 above and spreading and levelling in layers including watering and well ramming complete all as specified and as directed

M&L hardcore of guage n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick using broken stone complete all as specified and directed.

M & L for 75 mm thick PCC type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base of flooring complete all as specified.

M&L for PCC (1:3:6)type C-2 using 40mm graded aggregate 75mm thick as in plinth protection complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed.

M & L for 15 mm thick cement plaster in cement mortar 1:4 on concrete or brick surface and finished even and smooth w/o using extra cement complete all as specified and directed.(Water proofing compound measured and paid seperately)

Supply only liquid Water proofing compound complete.

M&L rendering 5 mm thick in CM (1:3) on concrete surfaces of ceilling ,finished the surfaces even and fair without using extra cement complete all as specified.

M&L for Non Skid ceramic coloured joint free tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.06 Sqm but n. exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Glazed ceramic coloured joint free tiles of size 450mmX 300mmX 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 15mm thick rendering coat CM 1:4 complete all as specified and directed.

M&L 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in cement mortar (1:4) including and pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (stylel)consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat molded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvlent cement for stiles and plain colour,PVC sheet for top rail,lock rail & bottom rail ,paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stlyles and rail with suitable PVC sheet beading and joined together with solvlent cement and fixing in the frame of site as per specification and drawing.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, S&F in opening as per specification & drawing complete all as specified.

S&F 150mm long aluminium anodised barrel tower bolt of extlruded section

S&F stainless steel butt hinges medium weight 100 mm long complete all as specified and directed.

M&L for 150mm long extructed aluminium handle fabricated type complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolt with hasp and stapple ( bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete all as specified and directed.

S&F powder coated (Minimum thickness of powder coating 50 micron ) anodised aluminium frame for doors, windows, ventilators with one or more rebate including joining cleat for fixing etc. complete all as specified

Material & Labour for preparation of new surfaces of wall and applying two coats of cement base paint complete in all respect as specified

M&l for preparation of newly plastered surfaces of wall and applying three coats of White wash all as specified

M&l for preparation of newly plastered surfaces of Ceiling and applying three coats of White wash all as specified

S&F 110mm bore PVC pipe single socketed in any length laid in trenches and floor complete all as specified and directed..

S&F 75 mm bore PVC pipe single socketed in any length laid in trenches and floor complete all as specified and directed..

S&F PVC (SWR) vent cowl 75 mm bore

S&F PVC (SWR) 75 mm bore junction single(Single T)’ equal or unequal complete all as specified and directed.

S&F PVC floor trap with grating including jointing waste pipe in runlead 75mm bore fixed in jointing with solvent cement complete as per direction by Engr-in-Charge.

PVC (SWR) multi floor trap of 75mm bore with grating including jointing with solvent cement complete all as specified and directed.

S&F vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) S/P trap white/ivory including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe CP 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of PVC long arm S/P trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors complete in all respect all as specified.

S&F Health faucet of ABS body having best quality/premium quality with wall hook and stainless steel braided rubber hose pipe not less than 1 metre, chrome finish fixed to EWC suitable for 15 mm bore of pipe complete all as specified.

S&F vitreous china premium/1st quality wash basin( table top), white, , size 550 mmX380mm including pedestal, screws & plug and brackets etc. all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and completein all respect as per manufacturer's instructions and taking down existing of any description/size complete all as specified and directed by Engr-in-Charge.

S&F vitreous china urinal bowl flat back of size 465x 355 x 265 mm white including providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securinal plugs with and 60mm long brass screws, pointing arround urinal backin cement and with grating and union for discharge pipe complete all as specified and directed..

S&F decorative type Mirror of 5 to 6 mm thick with bevelled edge and fixed with studs including 8 to 9 mm thick PVC solid sheet backing and PVC beading/border all around of size as specified and all as directed by Engineer-In-Chagre

S&F C.P towel Rail 60 cm long ‘D’ type 20 mm dia complete all as spfd.

Supply and fixing for steel water tubing medium grade of 15mm bore galvanised fixed to wall ceiling or laid in floors with all fittings (Such as bends elbow, tee, short pieces, union etc) complete all as specified

M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth on brick walls complete all as specified and directed

Supply and fixing for steel water tubing medium grade of 20mm bore galvanised fixed to wall ceiling or laid in floors with all fittings (Such as bends elbow, tee, short pieces, union etc) complete all as specified

Supply and fixing stop valves/gate valves/angle cock 15mm bore cast copper alloy srewed dowh high pressure,brass polished finished with crutch or butterfly handles screwed both ends for iron pipes or for unions and fixed complete all as specified and directed

S & F 15 mm CP bib taps cost copper alloy with crutch or butterfly handles screwed for iorn pipe or for brass ferrule and fixed to 15mm bore pipe complete all as specified and directed

Supply and fixing low density PVC connection commercial quality 450mm long incl PTMT nuts at both sides of 15mm bore and fixed complete all as specified and directed.

S&F Pillar taps 15mm bore dia cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed for iron pipe and fixed complete all as specified and directed.

S&F PVC flusing cistern low level 10 Ltr capacity of approved make including fixing of brackets connection to WC with CI brackets and making good disturbed area complete all as directed.

S&F ISI marked doubled layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) 1000 Ltrs capacity hoisted and fixed in position all as specified including 20 mm dia brass float valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC water tank complete all as specified and directed by Engr-in-Charge.

M&L Salt-glazed stoneware gully trap 125x100 mm, setting and jointing with solvent cement complete all as specified and directed.

Surface excavation n exe 30cm deep and average 15cm deep and getting out hard/dense soil complete all as specified and directed

M&L sand filling under floor /over floor or in sand cushion under interlocking tiles including well ramming complete all as specified and directed

M & L 60 mm thick machine pressed precast concrete interlocking paver block any shape with grey cement and pigment and size confirming to IS 15658-2006 M-35 Grade complete all as directed by Engr-in-Charge.

M&L for precast cement concrete Type B1 1:2:4 (20 mm graded aggregate) in appex stone/kerb stone with plain fair faces including chamfers, weathering throting etc and set in cement mortar 1:4 complete with joints to math size and shape as approved by engr-in-charge

M&L for PCC (1:2:4) type B-0 using 20mm graded crushed stone agg as in coping /benching in man hole etc,finished even and smooth using extra cement incl necessary form work complete all as specified and directed.

M&L for PCC(1:3:6) type C-1(Using 20mm graded stone aggregate) to bed of drain pipe incl. packing under and haunching against the pipe after they are laid and tested for 150 mm bore complete all as specified & directed.

M&L for laying and jointing RCC Class NP-2 drain pipewith collars of internal dia 150 mm complete all as specified and directed.

S&F reinforced precast factory made concrete manhole/drain covers of size exc 0.12sqm but n exc 1.00 sqm and thickness not less than 50 mm and shape of square/rectangular/circular fixed in position complete all as specified and directed. For measurement purpose it will be measured in cubic metre. Make : S K Engineers, Patiala/ Manju Concrete Fabricators, Mohali/ Radhika Enterprises, Ambala or equivalent as approved by GE

M&L for cutting into existing manholes for connecting new drain pipe making good to pipe & rendering cutting out existing benching for and forming branch channel(1/2 round or ¾ in section) in cement concrete 1:2:4 type B-1 smooth finish and reforming benching as required complete for 150mm internal dia pipe all as directed bt Engr-in-charge.

M&L for Point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper conductor for one light/fan/bell in new PVC conduit to be terminated in pressed steel terminal boxes with top cover plate including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the existing surface as per existing treatment all as specified and directed by Engineer in-charge Note-I-(Switches and regulators shall be measured and paid for separately). II ( Wiring shall be done as per colour code in IS for phase, neutral and earth). III- (The cost of modular cover plate and metal flush boxes is deemed to be included in the unit rate quoted for this item). IV - cost of Eye/bottle thimbles used for connection in switches/sockets & MCBs in DBs is deemed to be included in the unit rate quoted for this item. V- Rate of cutting chasing included in the unit rate quoted for this item

All as per Sl item No 74.00 above herein before but one socket out let 5 pins 5 Amp on the same board with other switches complete all as specified and directed.

All as per Sl item No 74.00 above herein before but for one socket out let 5 pins 5 Amp on independent board complete all as specified and directed.

All as per item No.74.00 herein before but 2.5 Sqmm PVC insulated and unsheathed FRLSH single core multistranded copper conductor incl 2.5 Sqmm PVC insulated and unsheathed FRLSH copper earth wire for switch socket combination 3 pin 15 amps on independent board.

Supply & fix Modular switch 1 way, 16 Amps, 1 module, 230 volts complete all as specified.

S & F Modular socket 5 pin 6 &16 Amps, combination type 2 module complete all as specified.

Supply & fix Modular switch 1 way, 6 Amps, 1 module, 230 volts complete all as specified.

S & F Modular socket 5 pin 6 Amps, 2 module 230 volts complete all as specified.

S & F ceiling rose surface bakelite surface 65 x 50mm 3 terminals all as specified & directed

S & F New generation energy saving and environmental friendly long life LED building security light 1x25 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07, with all accessories including suitable bracket with 32mm bore light grade GI pipe bend to shape, including MS clamp made of 25x3mm FI and PVC cable 1.5 Sqmm twincore from ceiling rose to light fittings complete all as specified and directed by Engineer-in-charge.

S & F Surface Mounted LED Bulk Head Luminaire of capacity 10 watt with ABS Body & Polycarbonate Diffuser, IP54 inc connection with ,with flexible wire 0.5 sqmm copper cable all as specified & directed by Engr-in-charge.

M & L Sub main wiring with two single core 6.0 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 6.0 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2(two) Runs of 6.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 6.00 Sqm Copper conductor Earth wire shall be measured as one unit) Note 2 :(i) Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces and cutting not exc. 10 cm girth . (iii) Including taking out/down existing unserviceable sub main wiring.

Supply and fix Sheet metal enclosure 8 ways double door for DBs when MCBs are to be used 240,volts including 200 Amps standard bus bar of suitable size and common neutral link all flush mounting type, drilling holes for incoming and out going cables with IP54 protection complete all as specified & directed by Engr-in-charge.

Supply and fix MCB , SPN, 240 Volts ,40 amp for fixing in DBs of including proper thimble connections complete all as specified and directed by Engineer-in-Charge.

Supply and fix MCB, single pole 240 volts 6 to 32 Amp capacity for fixing in DB’s including proper thimble connections complete all as specified and directed by Engineer-in-Charge.

M & L for Earthing complete with galvanized iron earth plate electrode of size 600x600x6.0mm , buried directly in ground (earth pit not less than 2.25 mtrs below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts , nuts , check nuts and galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate 20 mm dia watering pipe medium grade 1.70 mtr long with a plug at top, GI protection pipe light grade 15 mm dia from earth pit to main board including PCC pit in cement concrete 1:2:4 along with CI frame and cover 10mm thick duly hinged to CI frame as shown in the electrical plate No3 of SSR 2009 part 1 specification at page 497.

Supply and fix Tube light fitting Self Ballasted LED Batten warm white Extruded Thermoplastic body with PC Diffuser in square LED Batten 20W 3000 K of capacity ,20 watt,4 ft long incl 3 core flexible wire 0.5 sqmm copper cable all as specified and directed by Engr-in-charge.

Supply and fix Tube light fitting Self Ballasted LED Batten Extruded Thermoplastic body with PC Diffuser in square LED Batten 20W 6500 K of capacity ,10 watt,2 ft long incl 3 core flexible wire 0.5 sqmm copper cable all as specified and directed by Engr-in-charge.

Supply and fix existing unserviceable mirror light with linear & compact 12 W mirror light with decorative grey end caps, polycarbonate body and ribbed opal diffuser of capacity 9 watt complete all as specified and directed by Engr-in-charge.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450mm sweep 1400 rpm , high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including Louver,making holes of suitable size, grouting nut-bolts and make surface good complete all as specified and directed by Engineer-in-Charge

Supply and fix DB box MCB protected socket PVC plastic base having MCB of suitable rating 20 amp C series complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying of cables including getting out in any kind of soil complete all as specified and directed.

Material and labour for sand cushioning for cables 8 cm below the cable and 15 cm above with dry river sand in trenches for cushioning of underground cable line including spreading, leveling, well ramming completed all as specified and directed. Note:-(i) Consolidated/punned sand shall be considered for purpose of payment.(ii) Sand shall be same as specified for plastering work.

Cutting of hardstanding floor/wall for laying of cable including matching with suface by using cement concrete 1:2:4 TYPE B-1 (20 mm graded agg)all as specified and directed.

M&L for Boring of holes under road, pavement, hard standing by trench-less technology using ultrasound technique and necessary machine suitable to pass through 40 to 80 mm bore GI tubing and cable etc complete all as specified and directed. Note: GI pipe shall be measured and paid seperately under relevant item.

Supplying & laying factory made unreinforced Precast concrete cable covers class LV type 1, flat, Size 250x150x40mm laid in trenches as protection to cables complete all as directed by Engr-in-Charge

Material and labour for replacement of GI tubing light grade 40 mm bore for passing through cables under the floor ,along the wall or along the pole complete all as specified and directed.

S&F XLPE Insulated ,screened, PVC bedded, galvanized steel wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified& directed by Engineer-in-Charge.

M&L for taking out branch connection from existing CI/DI pipe line upto 250 mm bore by using freulle including insertion of TEE of 50x50x25 mm complete all as specified& directed by Engineer-in-Charge.

Returning filling in trenches, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as directed. ( Surplus soil if any shall not be removed but left proud over the trench) complete all as specified and directed.

Supply and fix Galvanized steel water tubing, medium grade of pipe 25 mm bore , screwed and socketed joints with and including all required fittings as in trenches, floors, on walls etc complete all as directed

Supply and fix Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed of 25 mm bore complete all as specified& directed.

Supply and fix Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed of 20 mm bore complete all as specified& directed.

Construction of valve chamber of size 90 x 90 x 90 cm (internal) with sub Class 'B' bricks straight or curved or plan exc 6 mtr mean radius built in CM 1:6 PCC 1:3:6 in foundation, 15 mm thick plaster in CM 1:4 on internal faces of walls, 40 mm thick, PCC 1:2:4 in floors including valve pit cover made out of MS sheet 3.15mm thick with angle iron 50x50x6 mm frame with fixing hinges, locking arrangements, hold fasts and handle etc duly painted with two coats of synthetic enamel paint over a coat of red oxide primer including necessary excavation & earth work complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1,5 mtr in depth for laying of cables errecting of pole including getting out in any kind of soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide but exceeding more than 1.5 m in depth but n exc 3.0 m in depth

Taking up or down worn out/ damaged / partly serviceable/unserviceable PVC insulated underground cable, armoured, heavy duty with aluminium conductors of size 10 sqmm x 4 core,1100 volt grade from duct/pole/wall/roof tops etc, testing of cable in the presence of Engr-in-charge to ascertain seviceability,seggregating serviceable and unserviceable cable, keeping aside serviceable cable in safe custody for reuse complete all as specified and directed .

All as per item No. 110 here-in before but cable of size 4 core 16 sqmm complete all as specified and directed .

Supply,laying, commissioning and testing or passing through pipe, XLPE insulated, armoured, electric power UG cable (Heavy duty) with aluminium conductor, 1100 volts grade in duct / trenches for small length for extension/replacement of the defective cable of nominal cross sectional area 10 sqmm 4.0 core including brass compression cable gland, terminal aluminium lugs etc making connection and testing complete all as specified and directed. Note :-(i) Pipes and bricks for protection, mild steel clamp nut and bolts sand cushioning shall be measured and paid separately.

All as per item No. 112 here-in before but for cable of size 4 core 16 sqmm.

All as per item No. 112 here-in before but for cable of size 4 core 25 sqmm.

All as per item No. 112 here-in before but for cable of size 4 core 35 sqmm.

All as per item No. 112 here-in before but for cable of size 3.5 core 50 sqmm.

All as per item No. 112 here-in before but cable of size 3.5 core 70 sqmm.

All as per item No. 112 here-in before but cable of size 3.5 core 95 sqmm.

M&L for Dismantling of ACSR conductors after unbinding from insulators Note:- (i) Total no of conductors in over head line to be taken down shall comprise a maximum of three phase, one neutral ,one street light/security light for measurement length of each conductor shall be taken separately, All as specified and directed by Engineer in Charge.

Demolition of concrete of any description and in any position not otherwise specially provided for complete all as directed by Engineer-in- Charge

M&L for PCC 1:2:4 type B-1 using 20 mm graded broken stone aggregate as in mass concrete in foundations etc complete all as specified and directed .

Material and labour for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for coping around the pole strut above ground level, foundation of stay etc. including neccassory form work and finishing the surface fair and even without using extra cement all as directed and specified.

M&L cable jointing kit for 1100 Volt grade cable heat shrink type joint complete with jointing meterial and ascessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 70 sqmm to 150 sqmm complete all as specified and directed .

Supply,laying,galvanised steel tubing light grade complete with all fitting of size 40 mm dia for cable protection along with pole across road etc. Complete all as specified and directed by Engr-in-Charge.

All as per item Ser No 124 above but size of pipe 50 mm dia

M&L for cable route indicator "LT UG cables" painted in brown colour and root of cable with arrow made of MS Sheet in suitable eliiptical shape and fixed in MS rod 12 mm dia 70 cm long (all word embossed ) and embedded in PCC block of size 30 x 30 x 60 cm in ground complete all as specified and directed.

Suppy and fix rigid non-metallic PVC conduit 20 mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.

Supply and fixing street light junction box of size 300 mm x 200 mm x 105 mm, made out of FRP sheet with weather proof hinged door including self locking arrangement, out door type weather and vermin proof complete comprising of insulated / high quality PVC sleeves aluminium bus bar of capacity 63 Amps 04 Nos (three phase RBY and black for neutral) with and including 6 Apms MCB single pole, single phase 230 volts, including 25 x 3 mm flat iron mounted on insulators, having arrangement of connecting incoming and outgoing cables complete and all as specified and directed.

Supply and fixing PVC insulated round/flat copper cable of size 3 core, 1.5 Sqmm for connection of LED lights from FRP junction box to street light fitting complete all as specified and directed.

M & L for Earthing complete with galvanized earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground to the depth of not less than 2.25 mtr below ground level with top edge of earth plate or a depth not less than 1.50 m below ground level connected to GI strip 32 x 6mm as earth lead by means of galvanized bolts, nuts check nuts and washers and necessary excavation and earth work PCC 1:2:4 type B-1 using 20mm graded brick aggregate for earth pit RCC cover , charcoal & common salt filled in alternate layers funnel with 20mm bore light grade watering pipe, 40mm dia GI pipe light grade for protection of GI strip, wire mesh and connected to earth point including testing on all as specified and shown in electric plate No 3 of SSR part I.

ANIL KUMAR AND CO (BID ID -3209440)

Jawandha Enterprises (BID ID -3209427)

AR CONSTRUCTIONS (BID ID -3209138)

Buttar Construction Co. (BID ID -3209326)

Arneja Builders (BID ID -3207243)