REPAIRS TO SUNKEN FLOOR, AC SHEET, TILING WORK AND MISC B/R WORKS IN COMMON AREA UNDER AGE B/R-II AREA AT NAVAL STATION KARANJA.

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L providing 75mm thick cement concrete 1:4:8 type D-2 using 40mm graded aggregate in sub base of floor complete all as specified and directed by Engr-in-Charge.

M&L for 100mm thick PCC (1:2:4) type B-2, using 40mm graded stone aggregate as in hardstanding, surface finished even & fair without using extra cement complete all as specified and as directed.

Dismantling of stone slabs & tiles of any description or thickness in floor aprons, cills etc laid bedded & pointed in any mortar complete all as specified and directed.

M&L for chequered cement concrete tile 30cmX30cmX 20 to 25mm thick set jointed and pointed in neat cement siurry in floor with grey cement and pig ments over 20mm thick screed bed or bedding layer of CM (1:6) complete all as specified and as directed.

M&L 60 mm Machine pressed pre casted pressed cement concrete inter locking paver blocks glazed coloured up to 6mm on the top in any shape and size, strenth not less than M-35 all as directed by Engr-in-charge

Material and labour for 25 mm thick sand cushioning for laying interlocking paver block complete all as specified and directed.

S&F 20 mm thick granite (any type) in single piece machine cut laid over CM screed bed 15 mm thick in cm 1:6 in floor and vertial surface and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including mirror polishing and bull nosing edging in any position any shape etc all as directed by Engr-in-Charge.

S&F green marble 17/18 mm thick machine cut, jointing and pointing with white cement slurry including 20mm thick screed bed or bedding layer of mortar in CM 1:6 complete all as specified and directed.

M&L non skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in floors and skirting over screed bed or bedding layer of morar 15 mm in cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed.

M & L for Glazed ceramic tiles in vertical surface 350mmx250mmx7mm/ 450X350X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in cm (1:4) for laying floor fineshes complete all as specified and as directed. Make : KAJARIA/ ORIENT BELL/ JOHNSON / SOMANY

M&L for vitrified tiles 7 to 8mm thick (squar / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and jointed in white/coloured cement to match over and including 10 mm thick screed bed in cement mortar in 1:4, complete all as specified and as directed by Engr-in-charge.

M&L 20-25 mm thick machine cut Kota stone slab flooring over cement screed bed 15mm thick in CM 1:6 and jointed with gray cement slurry mix with pigment to match the shade of slab including rubbing and mirror polishing complete all as directed by Engr-in-Charge.

Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water, etc.

Demolition of brick work built in cement or cement lime mortar including rubbish off the premises complete.

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete.

M&L using ready mix plaster for rendering 20 mm thick on fair faces of brick/concrete surfaces with two coats i.e (15 mm thick backing coat and 5mm thick finishing coat) , finished even and smooth complete all as specified and directed. (Note:- Item rate shall be include any height of Bldgs for scafolding as all arrangement.)

M&L using ready mix plaster rendering 10 mm thick CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth including Sagol finish complete all as specified. (Note:- Item rate shall be include any height of Bldgs for scafolding as all arrangement.)

M&L using ready mix plaster rendering 5 mm thick CM 1:3 on ceiling or concrete surfaces, finished even and smooth complete all as specified. (Note:- Item rate shall be include any height of Bldgs for scafolding as all arrangement.)

M&L for preparation of new or previously untreated plastered surfaces of walls and applying two coats of acrylic antifungal paint exterior grade paint on one coat of primer complete all as specified and as directed.

M&L for preparation of new or previously untreated plastered surfaces of walls and applying two coats of acrylic antifungal paint exterior grade paint CAMOUFLAGE PATTERN on one coat of primer complete all as specified and as directed.

Preparation of new plaster surfaces of ceiling, and applying three coat of white wash on ceiling all as directed by Engr-in-Charge.

M&L Preparation of new or previously untreated steel and iron surfaces of any description not other wise described over 10 centimetre width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for complete removal of existing treatment from old decorated plastered surfaces of walls complete all as specified, removal of nails etc & filling cracks/hole with putty, applying wall care putty upto 1mm thick (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats oil bounded distemper white or coloured by auto roller complete all as specified & directed by Engineer-in-Charge.

Taking down aluminium doors shutters only and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium beads & cleats of existing make and also refixng the handles & mortice lock in existing postiion with and including new screws including refixing the door shutters in same opening complete all as specified and directed. Note : If broken or unserviceable glass/aluminium wire mesh/floor spring/concealed lock is replaced same will be paid separately under relevant items.

Taking down aluminium windows shutters only and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium cleats of existing make and also refixng the locks & roller in existing postiion with and including new screws including refixing the window shutters in same opening complete all as specified and directed. Note : If broken or unserviceable glass/aluminium wire mesh/floor spring/concealed lock is replaced same will be paid separately under relevant items.

S&F in repair 12 mm thick vertical toughened glass as in door shutters / partition with including stainless steel SS-304 patch fitting fixed with Anchor fastner, each glass panes shall be exceeding 1.5sqm, but not exceeding 2 sqm each, all edges of glass shall be diamond polished of make as approved by GE.

S&Fin repair 30 mm dia stainless steel handle of 60 cm long and fixed to toughned glass as per manufacturer's instructions of make- Enox or equivalent make as approved by GE.

S&F in repair stainless steel glass lock fixed to toughened glass as per manufacturer's instructions of make-Enox or equivalent make as approved by GE.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) not exceeding 1.5 Square Metre each , removing from the site including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exceeding 1.5 sqm not exceeding 4.0 Square Metre each , removing from the site including cutting holes required for taking out existing hold fast etc.complete all as specified and as directed.

Taking down of shutters of any description n exc 1 sqm each including iron mongrey & removing from site complete all as specified and directed by Engr-in-charge.

Taking down shutter from frame exc 1 sqm but n.exc 2 sqm each including iron mongrey & removing from site complete all as specified and directed by Engr-in-charge.

S & F 2nd class hard wood plain solid straight chowkats and frame of wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S & F 30 mm thick second class hard wood plain, framed,panelled shutters(any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and as directed.

M&L second class Hardwood 35 mmthickness, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified by Engr-in-Charge.

S&F factory made 30mm thick solid core Flush door shutter with block board with BWP plywood on both side all as specified directed by Engr in Charge.

Cutting holes in brick wall for inserting holdfast and making good dismantled portion by filling PCC (1:3:6) type C1 exc. half brick but n.exc one brick incl existing surface finishes complete all as specified and as directed.

S&F mild steel work, Grade Fe-410-0 or Fe- 310-0, as in flat iron (for holdfast) complete all as specified and as directed.

S&F 100mm long medium grade stain less steel but hinges bright polished fix with nut and bolt complete all as specified and directed by Engr-in-Charge.

S&F Aluminium handle, cast type anodized size of handle 150 mm complete all as specified and as directed.

S&F 125mm long Extruded aluminimum alloy handles, fabricated type complete all as specified and as directed.

S&F Aluminium anodized, barrel tower bolt of extruded section, length of bolt 150 mm complete all as specified and as directed.

M & L applying two coats of synthetic enamel paint on new or previously wooden surfaces incl preparation of surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete.

S&F 300mm long, 16mm dia stain less steel bright polished door sliding bolt hasp and staple type with fixing of clips 3 Nos with fixing with nut & bolt all as specified directed by Engr in Charge.

S & F in repair floor door stopper of Aluminium alloy body and tongue, over all length of cover plate 150mm anodised with hard drawn steel spring, fixed to shutters complete all as specified and as directed.

Supply & Fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube and edgeswill be painted to match will printed sheet fixed in opening as per specification & drawings complete all as specified and as directed.(Make : Rajshree,Plastiwood, Sintex or equivalent as approved)

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tube top & bottom rail mild steel frame shall be covered with heat moulded plain colour PVC “c” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the mild steel frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying & fixing in the frame at site as per specification and drawing complete all as specified and directed.

M&L for polyester powder coated aluminium frame/chowkhat for door shutter of section 101.0x44.4 mm of gauge 16 fixed in brick masonery or conrcrete work by necessary drilling and rawl plug aggangement etc incl polyester powder powder coated aluminium door shutter top rain and middle rail of section 85x44.4 of 16 gauge and bottom rail of section 150x44.4 mm 16 gauge (all section of such type having arrangement for fixing glass/prelaminated board on one or both sides as required) incl powder coated aluminium fittings such handle (2 Nos each shutter), tower bolt, locks (mortise type lock) glazing clips, rubber packing, anodised aluminium snap beading screw, SS hinges type B-21 150mm long (3 Nos each shutter) etc and one door stopper two legged with each leaf (shutter) complete (Glass and prelaminated board, DG grill and Rubber gasket to be measured and paid separately under appropriate item of sch A) complete all as specified and directed by Engr-in-Charge (Make of aluminium section shall be hindalco/Jindal or out of make as specified in list)

M&L, for 12 mm thick pre-laminated particle board, exterior grade, pre-laminated on both side with decorative choice laminations fixed between aluminium section with and including snap fitting aluminium clips of polyester powder coated along with the glass with rubber gasket, complete all as specified and directed by Engr-in-Charge. Make. Anchor/Kitply/Novapan.

S&F in repair aluminium anodised grill of design DG 104 pattern made out of 10mm dia rod fixed with and including standard aluminium frame of F section of size 23.40mmx15.30mm & 1.4mm thick all as per manufactures instructions complete all as specified & directed. Make- Deco grill or equivalant

S&F for rubber beading suitable for fixing 4mm/ 5mm thick glass in aluminium window / doors etc complete all as specified and as directed.

M & L for Double action floor spring hydraulically regulated made up of minimum 1.25mm thick alum,inium alloy sheet foundation box, main ody with stainless steel cover, governing pivot made of brass, other plart made of mild steel heavy duty and fixed.

S&F for aluminium window/ventilator/partition, made out of extruded powder coated aluminium sections, with sliding or openable shutters including frame & necessary jointing cleats, glazing clips, powder coated aluminium snap beading,screws etc, complete and also including powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts, hooks & eyes, peg stays and handles including connected items,with and including making good to the disturbed portion with its original specifications complete all as specified and directed.

S&F for concealed star lock powder coated for aluminium window fixed as per manufacturers instructions complete all as specified & as directed.

S&F aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

Hacking out old broken glass (any thickness, size, quality or description) from metal/wooden frame complete.

S&F 5 mm thick sheet glass,ordinary quality,in squares n exc 0.5 sq m each pane fixed to aluminium frame with rubber gasket or fixed with glass putty as required etc completed all as specified and as directed by Engr-in-Charge. (Rubber gasket or glass putty deemed to be inclusive of rate quoted by the contractor.

S&F 5 mm thick sheet glass,ordinary quality,in squares n exc 0.5 sq m each pane fixed to aluminium frame with rubber gasket or fixed with glass putty as required etc completed all as specified and as directed by Engr-in-Charge. (Rubber gasket or glass putty deemed to be inclusive of rate quoted by the contractor.

S&F 4 mm pin headed/frosted glass ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as spcified and directed by Engr-in-Charge.

S&F for rubber beading suitable for fixing 4mm / 5mm thick glass in aluminium window / doors etc complete all as specified and as directed.

S&F in repair Mortice lock vertical type size 100mm 04 lever complete all as specified and as directed.

S & F in repairs Bib tap15mm dia standard of CP any colour screwd for iron pipes and fixed (minimum weight 15mm - 90 gms )

S & F in repairs stop valve of CP any colour high presure screwd for iron pipes and fixed (minimum weight 15mm - 90 gms )

Supply and fixing in repair PVC flushing cistern of 10 ltrs capacity including flush pipe PVC connection etc complete all as specified and directed.

Supply and fixing in repair 15 mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with long screws shanks and fly nuts complete all as specified and directed.

Supply and fixing in repair white vitreous china wash down water closet pan (Pedestal pattern) with and including P or S trap, plastic seat cover closed pattern, fixing bolt etc complete all as specified and directed.

S & F in repairs Vitreous China Half stall urinal White complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, of size 580 mm x 440 mm white with integral foot rest complete including provn of cement concrete bedding and connection to trap, outgoing flushing pipe, anti syphonage pipe,CI trap 100 mm Bore of pipe etc complete.

S & F in repair vitreous China wash hand basin white, flat back of size 550x400mm fixed on and including cast iron cantilever bracket, 32mm dia waste coupling including fixing of tap, waste fitting etc complete.

S&F 32mm dia PVC waste pipe for WHB and urinals complete all as specified and directed.

.M&L for providing 15 mm dia PVC connection 450mm longwith brass fly nut complete fixed in repairs

M&L for 100 mm diameter of outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete.

Cutting holes into or through bricks wall built in cement mortar or cement mortar exc 150 sq cm but n. exc 400 sq. cm and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks, etc, removal to store (measured overall as fixed along the centre line over fittings and accessories).

S &F 160 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall with stock clamps complete all as specified and directed.

S&F for PVC (SWR) bends any radius 160mm bore complete all as specified and as directed

S&F in repair 75mm bore PVC(SWR) bends any radius with access door complete all as directed.

S&F in repair 110mm bore PVC(SWR) bends any radius with access door complete all as directed.

S&F in repair 75mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete.

S&Fin repair 110mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete.

Taking up or down steel tubing and connections 15 mm bore complete.

Taking up or down steel tubing and connections 20 mm bore complete.

M&L for 15 mm dia steel tube medium grade galvanized with all fittings and fixed complete in wall, ceiling or laid in floor complete.

M&L for 20 mm dia steel tube medium grade, galvanised with all fitting and fixed complete to wall.

S&F in repair 15mm bore , CPVC confirming to IS 15778, SDR 11 pipe first Class with all fitting complete fiixed on wall, celling and floor complete all as specified and directed by Engr-in-Charge.

S&F in repair 20mm bore , CPVC confirming to IS 15778, SDR 11 pipe first Class with all fitting complete fiixed on wall, celling and floor complete all as specified and directed by Engr-in-Charge.

S&F in repairs mild steel tubing of 25 mm dia with PVC coating for curtain rod fancy type including fancy type PVC rings and brackets (wall to wall or flush to wall) for securing to curtain rod, fixed in repair complete.

Dismantling of wall paneling any type, any fixing etc. complete all as specified and directed

S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

S&F for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.

S&F for decorative hollow PVC sheet 10 mm thick fixed to fixed to wall panelling with self drilling screws including necessary frame or grid work abd cirer moulding as required as per manufacturing instruction and complete all as directed by Engr-in-Charge

S&F in repair PVC tiles /sheets, of 2mm thick laminated plain coloured homogenous, laid with approved rubber based adhesive in floors all as specified and directed.

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete. (Note:- Item rate shall be include any height of Bldgs for scafolding as all arrangement.)

S&F Anodised aluminium snap grid of size 600x600 mm frame work for false ceiling complete all as specified and directed by Engr in Charge.

S&F Hangers 6 mm dia GI ( upto 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

S&F for PVC False ceiling consisting of 600 mm x 600 mm, 8-10 mm thick prelaminated self design PVC sheet of density 600 kg/cum solid PVC panel insert in a frame work made using aluminium T section of size (25mm x 25 mm, 19 gauge or 1mm thick) in square pattern of grid size of 600 x 600 mm. The aluminium frame work is supported from the ceiling with the help of GI wire/6 mm MS rods of required size set to maintain for proper level etc. The aluminium frame work is supported on side wall with the use of aluminium 25 mm X 25 mm angles complete as per direction of Engr-in-charge, Manufacturer's specification & drawing.

S&F false ceiling with Armstrong XL 24mm grid system of grid size 600x600mm with 14mm thick ceiling board of RH-90. Grid shall be suspended from ceiling using 4mm dia pre straighten GI wire with 6mm nylon rawl plug & screws at 1200mm intervals complete all as manufacturers instructions and as directed by Engr-in-Charge.

S&F in repair 4 mm thick asbestos cement plain building board fixed to aluminium grid frame work in ceiling including applying two coats of oil bound distemper over a coat of chalk whitening all as specified and directed. (Note:- Item rate shall be include any height of Bldgs for scafolding as all arrangement.)

Dismantling of asbestos cement (corrugated, semi-corrugated, etc.) sheets any thicknes in roof covering all as specified and directed by Engr-in-Charge.

S & F in repair Asbestos cement sheet corrugated or semi corrugated 6mm thick fixed with L or J type GI hook bolts complete all as specified and directed by Engr -in -charge

S&F Asbestos cement 6mm thick in two pieces adjustable plain ridge fixed wirth l-type and J-type or cranked hook bolts complete all as specified and as directed by Engr-in-Charge.

S&F in repair stainless steel wire cloth with 8% nickle . 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete of any description and in any position not otherwise specified and provided (in sunken portion area) , removing demolished material completely and old waste pipe from sunken portion and cleaning the side/bottom surface of sunken floor with wire brush, complete all as specified and directed.

M&L for PCC 1:5:10 type E-2 using 40 mm brick aggregate as in sunken floor slab complete all as specified and as directed by Engineer-in-Charge.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in seal the joints in sunken portion with PCC blocks, rounded or chamffered on edges complete all as specified and directed by Engr in Charge.

M&L for providing 25 mm thick cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in sub base of floor complete all as specified and directed by Engr-in-Charge.

M&L using ready mix plaster for rendering 15 mm thick in sunken portion in cement mortar 1:3 including water proofing liquid as per manufacutre as per specification complete all as specified and as directed by Engineer-in-Charge.(water proof liquid paid and measured seprately)

Supply only water proofing liquid compoundcomplete all as specified and directed by Engr-in-Charge. :Make : DR. FIXIT PIDE PROOF LW, CICO, FOSROC.

M&L water proofing treatment of sunken/ roof consisting as under:- (a) Applying evenly a coat of bituminous primer conforming to IS-3384:1986 @ 0.30 litre/sqm including preparation of roof surfaces (b) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg/Sqm on plaster surface all as specified. (c) A layer of 3mm thick APP polymeric membrane of weight not less than 3.60 kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/sqm), duly sealed at over laps & joints with end laps of the 10cm and side over laps of 7.5cm by flame (by torch application) all as per manufacturer’s instructions, complete all as specified and directed.

M&L for 70 cm long medium grade 50 mm bore GI pipe fixed in to the sunken portion upto the wall for taking out leakage water and making good to existing surface complete all as specified and as directed by Engineer-in-Charge.

M&L for PCC (1:2:4) type B0 (using 12.5mm graded aggregate) in coping bed black etc including nessesary form work complete all as specified and directed.

Disconnecting existing tanks, exc 500 and not exc 2000 litres capacity, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and refixing in postion and cleaning and removing all as scales and dirt, etc from tank and from mouth of circulating pipes, etc complete and washing the tanks by using bleaching powder and clean water & including reconnecting & re-fixing the same in its original position included Note. a, b, c in this items complete all as specified and directed. Note. (a) writing the date of cleaning on the outer surface of the tank by paint, letters of 3cm height and width including obliterating old writing all as specified and directed. (b) If tank cleaning time, any blockage of internal/external pipe line to be cleared and incl all necessary fittings. (c) Before tank cleaning inform to all Qtrs individuals. (d) Before the tank cleaning disconnect and refixing the same position.

M/s S.D Construction Co

M/s Vishwakarma Enterprises