PROVN OF HARDSTANDING WITH OVERHEAD COVER SHED IN FRONT OF BLDG NO P-3 OF 157 LT AD REGT (COMP) AND PROVN OF CHAIN LINK FENCING BETWEEN NCC TRAINING AREA AND 4 ASSAM MAGAZINE AREA AND 02 X MINOR WORKS UNDER AGE B/R-II OF GE (I) KANPUR

Amount

Surface dressing n exc 15 cm deep in Soft / loose soil complete all as specified and directed.

Clearing away all grass vegetation, Sapling, Shurbs and trees n. exc 30 cm girth and removing rubbish up to a dist of 50 m outside the pheriphery of the area complete all as specified and directed.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth : for foundation and getting out in any type of soil complete all as specified and directed.

Excavation in post holes n exc 0.5Cum, getting out , returning filling in and ramming earth or broken rubble mixed with earth around in layers n exc 50mtr and making good surface in soft/loose soil complete all as specified and directed.

M&L for Brick work with subclass 'B' bricks straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6) complete all as specified and as directed.

M & L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all specified and directed.

M & L for PCC 1:4:8 Type D2 using 40mm graded stone aggregate as in foundation / sub base complete all as specified and directed.

M & L for PCC 1:3:6 Type C2 using 40mm graded stone aggregate as in foundation complete all as specified and directed.

M & L Cement concrete Type B-2, 1:2:4 (using 40mm graded stone aggregates) in foundations, filling and mass concrete complete all as specified and directed.

M&L for sand filling as screed bed for laying Interlocking paving block incl. watering and consolidation complete all as specified and directed.

M&L for machine pressed pre cast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness, M-40 grade with grey cement and pigment complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in path/ plinth protection finished the surfaces even & fair complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removing excavated soil not exceeding 50 m distance and depositing where directed at alevel n exc 1.5 metre above the starting point complete all as specified and directed.

M & L rolled mild steel (Fe 410-W Gde E-250 quality A) in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance piece, cleats etc. complete as specified and directed.

Supply and fixing Galavinsed steel tubes 100mm dia bore medium grade fixed with nut and bolts /fasterners in PCC for supporting purlin/ rafters incl two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S & F for Fe- 410-W (Gde-E-250) quality A mild steel Joist, channel, angle, or tee section, fixed independently, without connecting plates etc. (cut to ordinary length i.e. within 20mm of the length indicated complete all as specified and directed.

S & F for Fe 410-W (Gde-E-250) quality A mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

S&F in for mild steel bolt machine made with hexagonal or square heads at one end and screw the other to be fitted with washer etc and one hexagonal or square not exc 5cm long end dia of neck 12mm including taking out old unserviceable bolts with nuts and washers complete all as specified and directed.

M&L for mild steel straining bars 10 mm dia cut to length bent to shape required including making hooks at end woven in chain link and fixed with nut and bolts Fe 410 (W)Gde Fe 410-W(Gde E-250) quality -A or Fe-290 (Gde E-165) complete all as specified and directed.

M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitings and hanging also fastening and fixing complete all as specified and as directed. (Fe-290 Gde E-165)

S & F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and directed.

M & L for preparation of new steel or iron surfaces of any description n exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer of zinc chrome red oxide complete as specified and directed.

M & L for preparation of new steel or iron surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat zinc chrome red oxide primer complete all as specified and directed.

M & L for hard core of (broken stone or buolders) gauge not exc. 63mm deposited spread and levelled in layers not exc. 15cm thick water rammed to a true surface complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and brushing neat cement slurry with 3.0kg of cement per sq. metre, complete all as specified and directed.

M & L for Pre Polished Kota Stone 20 - 25 mm thick on risers of steps, skirting, dado and pillar laid over and including 10 mm thick cement plaster in CM 1:4, fixed and jointed with grey cement slurry mixed with pigment to match complete all as specified and directed.

M & L for Pre Polished Kota Stone 20 - 25 mm thick laid over and including15mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match including rendering, moulding & polishing on exposed edges complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:6 on other than fair faces of concrete or brick, finished even and fair without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering on brick or concrete surface in CM 1:4 finished even & smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls including cornices plaster etc and applying two coat oil bound distemper of any colour over a coat of chalk whiting on wall including rubbing with sand paper to achieve a smooth surface and sharp straight edges etc complete all as specified and directed.

M&L for preparation of new surfaces of wall and Applying two coats of cement base paint over a coat of primer on wall complete all as specified and directed.

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595mm of approved texture with Semi perforated 12mm thick micro tegular edged GRG false ceiling tiles, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm, cross-T of size 15 x 32 mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm to 2200mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing, complete all as specified and directed.

S&F mild steel galvanised chain link fencing made of galvanised steel wire dia of wire not less than 2.50 mm of fixed to flat iron rails with RCC/angle iron post all as specified and directed.

S&F Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and directed (Each line wire to be measured).

S&F concertina coil RAZOR type barbed wire (reinforced barbed type) complete all as specified below :- (i) Dia of coil when unstrtched 600mm. (ii) No of circles per coil - 50 to 53. (iii) Weight of each coil 9.50 Kg to 10 Kg. (iv) Length of coverage per coil 6RM. (v) Central core wire - Made from high tensile spring steel core wire confirming to IS-4454 duly hot dipped galvanised with diameter 2.59mm + 0.05mm. UTS 145-160 kf/sqmm, zink coating 250-300 gm per sqm. (vi) Strip-Electro galvanised steel strip 0.5mm + 02mm thick of width 19mm confirming to IS 1573, zinc coating (120gm/Sqm) and bituminised dipped with of bars 11.5mm, pitch of barbs 25.4mm + 0.2mm. (vii) Clips :- AISI 304-1.5mm thick C&U clips 'C' clips shall be used for fixing coils and RBT wire. "U" clips shall be used for joining one coil to another coil and RBT wire. (viii) No of clips for each coil 125. (ix) Handles and spikes shall be provided as required.

M/S AADI ENTERPRISES (BID ID -3105560)

m/s sahu enterprises (BID ID -3108348)

Bindra Builders (BID ID -3108173)

M/s DKS Engineering Works (BID ID -3107040)

Khalil Ahmed and Sons (BID ID -3119932)