Establishment of NICU PIKU and addition alteration in Diagnostic block of Govt. Medical College Associated Hospital Rajuri

Amount

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: Of area beyond 3 sq. metres

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead : in cement sand mortar .all leads/lifts/disposal & carriages. (Complete job)

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead: 1:3:6 or richer mix .all leads/lifts /disposal & carriages. (Complete job)

Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts embedding holdfasts in cement concrete blocks of size 15x1 Ox1 Ocm with cement concrete 1:3:6 (1 cement :3 coarse sand: 6 graded stone aggregate 20 mm nominal size) painting two coats of approved wood preservative to ' sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 metres lead: Door chowkhats

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded brick aggregate 40mm nominal size) including the cost of centering and shuttering, all works upto any floor level, all leads/lifts & carriages. (Complete job)

Providing and laying in position Cement concrete of specified grade in foundations, retaining wall, return walls, pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or laces courses, parapets, bed block, anchor block etc including cost of centering and shuttering – all work upto required level in 1:3:6 (1cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) using crushed stone aggregate including curing, all leads/lifts & carriages. (Complete job)

Providing and laying Reinforced cement concrete 1: 1.5:3 (1 Cement :1.5 coarse sand :3 graded crushed stone aggregate 20 mm nominal size) in position including cost of centering and shuttering all work upto floor 5 level including curing, all leads/ lifts & carriages. (Complete job)

Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete TMT bars as per design. (Complete Job)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. all leads/lifts & carriages. (Complete job)

Providing and laying anti skid finished full-body vitrified premium quality floor tiles of 60x60cm sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622 of approved make of Somany, Kajaria, NITCO and Orient make in colours and shade Ethnic-Berlinetta White, Crown White, Dacia White, Dacia Green, Dacia Pink, Dacia Ivory, Dacia Grey, Dacia Brown, Dacia Pearl, Dezzling White, Evalia, S&P Grey, S&P Brown, Ultra White, Haze Grey and Border of Royale- Crown Mint, Crown Pink, Crown Snow, Micra Brown and Radiant- Lawrence Gold, Lawrence Bianco, Lawrence Grigio, Lawernce Moka, Lawrence Jaisalmer, Nuvro Brown, Nuvaro Mocha, Nuvaro Grey, Nauvaro Nero, Nuvaro Crema, Nuvaro Bianco, Nuvaro Beige laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with matching Epoxy etc. complete.all leads/lifts & carriages. (Complete job)

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :First layer of slurry of cement@ 0.488 kg/sqm mixed "Ywith with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours. Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound@ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes prepartation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonary with polymer mixed slurry .all leads/lifts & carriages. (Complete job)

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in super structure upto all floor levels in cement mortar 1:6 (1 cement : 6 coarse sand) including curing, Scaffolding all leads/lifts & carriages. (Complete job)

15mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement : 4 fine sand) all leads/lifts & carriages. (Complete job)

Providing and fixing 8 mm thick PVC wall lining (tongue & grove) with necessary Supports, steel- fasteners, long bolt & screws, including making provision for opening of doors & windows electric conduits & switch board etc. complete as per the direction of Engineer-in charge. (N.S.I)

Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing ‘C’ wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of GI steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring ‘T’ with GI Metal Ceiling Clip in plain Beveled edge global white colour tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

Providing and fixing gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels Raj Nager plain white marble/udhaypuri green marble/zebra black marble (Area of slab over 0.5 sqm) 18mm thic

Extra for providing edge moulding to 18 mm thick marble stone counters, Vanities etc. over 8.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge Granite work

Extra for providing opening of required size and shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble I stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works

Providing and fixing in position collapsible steel shutters with vertical channels 20x1 Ox2mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T -iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer

Providing and fixing Aluminium Partions/ Doors/ windows or equivalent works including APC paneling/ 6 mm thick glass pane including all leads lifts fixation at site as per the direction of Engineer -in-charge. Complete job.(N.S.I)

Providing and fixing stainless steel (Grade 304)work made of Hollow tubes round/ rectangular/square channels, plates etc.including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered including fixing accessories such as nuts, bolts, fasteners etc.

Providing and fixing vertical / roller blinds of approved quality as per architectural drawings and the directions of Engineer-in-Charge. N.S.I

Providing and fixing curtain in ICU/CCU with all accessories of operation required at site of approved quality as per architectural drawings and the directions of Engineer-in-Charge. N.S.I

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including:a) Structural analysis & design and preparation of shop drawings for pressure equalization or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.b) Providing, fabricating and supplying and fixing panels of aluminium composite panelcladding in pan shape in metallic colour of approved shades made out of 4mm thickaluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanized with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bimetallic contacts all complete required to perform as per specification and drawing The item includes cost of all material &labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

Providing and fixing in wall lining of specified medium density board, pre-laminated one side decorative lamination other side balancing lamination Grade I, exterior grade, with necessary fixing arrangement and screws etc. complete. 8.25.1 Flat pressed 3 layer particle board or graded wood particle board grade-I type-II, IS: 12823 marked including primer coat on unexposed surfaces 18 mm thick

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch( Red colour switch to be used for UPS) , modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Make of Accessories :Legrand(Arteor)/MK(Aspect)/Schneider( Zencilo)/ Anchor(ROMA) Make of Wires : Finolex/Lapp/RR Kabel/Anchor/Havells

Group B

Group C

Wiring for light loops/circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required Makes : Finolex/Lapp/RR Kabel/Anchor/Havells

2x1.5 +1 1x1.5 sq. mm

2 x 2.5 + 1x2.5sq. mm

Supply of following sizes of heavy duty exhaust fan as per approved makes : Bajaj/Usha/Khaitan/Havells/Polycab

300mm Sweep

S/F modular boxes, base and cover plate : Supplying and fixing following size/modules , GI box alongwith modular base & cover plate for modular switches in recess etc. as required.Makes : Legrand(Arteor)/MK(aspect)/ Schneider( Zencilo)

6 Module ( 200mm x 75mm)

S/F power plug point modular type accessories: Supplying and fixing on exisitng GI Box modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 & 5/6 amps modular socket outlet and 15/16 amps modular switch, connection, painting etc as required. Make of Accessories : Legrand(Arteor)/MK(Aspect)/Schneider

S/F Modular type switch/socket : Supplying and fixing following modular switch / socket on the existing modular plate/frame & switch box including connections but excluding modular plate etc. as required Make of Accessories : Legrand(Arteor)/MK(Aspect)/Schneider

5/6Amp Switch

15/16A Switch

3 pin 5/6 Amp socket outlet

6 pin 15/16A Socket Outlet

Supply of following LED lighting fixtures of make philips/wipro/GE/Trilux . Fixtures must be tested at NABL acrredited laboratary. Test Certificates shall be made available by the contractor for the tests.

19W( Maximum) 4ft LED Surface Mounted light fixture CRCA housing 2000 lumens having minimum system lumen efficiency of 100 Lumens per watt equivalent to Endura LED BN108C of Philips 6500K, L70 40000hrs, pf >0.95, THD<10%, Voltage Input range 140-270V, with short circuit and overvoltage cut off

31W ( Maximum) 2ftx2ft LED Recess mounting Light Fixture having minimum 3600 Lumens having minimum system lumen efficiency of100 TO 115 Lumens/watt equivalent to RC380B LED29SLEDG3 6500 of Philips

Supply, Installation Testing and commisisoning of Fully Automatic Servo Stepup of 10 KVA of approved brand & as per direction of Engineer-in-charge

Supply, Installation Testing and commisisoning of 1400 VA sinevave Invertor including 02 no Batteries of 5year warranty period of approved brand i.e. Exide, Luminious, Amaron, and as per direction of Engineer-in-charge

Supply, Installation Testing and commisisoning of Split Ac's alongwith transformer and fittings as per site requirments complete Job of approved brand (Blue Star, O-Gernal, Hitachi, Voltas, LG )5 star raiting .

2 tonne (Hot & cool)

Supply of Wall / Ceiling Fans 230V 50Hz celing fan with double ball bearing with low power consumption of following sweeps: Bajaj/Usha/Khaitan/Havells

1200mm Ceiling Fan

1400mm Ceiling Fan

400mm Wall Fan

Supply of Wall / Ceiling Fans 230V 50Hz celing fan with double ball bearing with low power consumption of following sweeps: Bajaj/Usha/Khaitan/Havells

Zamurd Hussain

AMJED SHAIZAD