REPAIR MAINT OF OLD RUSTED GI PIPE LINES WITH ALLIED WORKS AT AYODHYA CANTT UNDER GE AYODHYA

Amount

Taking out 15 mm dia bore steel water tubing with all fittings of any description including cleaning for refixing or removing to store / from site complete all as specified and directed by Engr-in-Charge. Note:- Excavation & Earth work shall be measured and paid for separately against respective item of BoQ

All as per Srl item No. 1.00 here-in-before but 20 mm dia bore steel tubing.

All as per Srl item No. 1.00 here-in-before but 25 mm dia bore steel tubing.

All as per Srl item No. 1.00 here-in-before but 50 mm dia bore steel tubing.

All as per Srl item No. 1.00 here-in-before but 80 mm dia bore steel tubing.

S&F 15mm dia bore new GI tubing, medium grade with all fittings and fixtures, fixed to wall / ceiling or laid in floor / trenches etc complete all as specified and directed by Engr-in-Charge. Note:- Excavation & Earth work shall be measured and paid for separately against respective item of BoQ

All as per Srl item No. 6.00 here-in-before but 20 mm dia bore GI tubing.

All as per Srl item No. 6.00 here-in-before but 25 mm dia bore GI tubing.

All as per Srl item No. 6.00 here-in-before but 50 mm dia bore GI tubing.

All as per Srl item No. 6.00 here-in-before but 80 mm dia bore GI tubing.

Refixing old 20mm dia bore steel tubing and connections in new or old position (Walls, ceiling, floors etc) including replacement of unserviceable fittings complete all as specified and directed by Engr-in-Charge .

All as per Srl item No. 11.00 here-in-before but 25 mm dia bore steel tubing.

Attending complaint for rectification of leakage of 50mm bore GI pipe line including excavation, returning and filling etc (if required) and replacing of defective / unserviceable fittings such as unions, sockets, bends, elbows, tees, nipples etc as per site requirement to rectify the leakage complete all as specified and directed by Engr-in-Charge. Note:- (i) The contractor or his authorised representative shall collect the complaint slips from JE I/C water supply and submit the same after rectifying the complaint duly signed by the users. (ii) The complaint shall be rectified within 24 Hrs from date of complaint failing which, recovery shall be charged @ Rs 500/- per complaint per day for the delayed period after 24 Hrs.

All as per Srl item No. 13.00 here-in-before but 25 mm dia bore GI pipe line.

All as per Srl item No. 13.00 here-in-before but 20 mm dia bore GI pipe line.

All as per Srl item No. 13.00 here-in-before but 15 mm dia bore GI pipe line.

M&L for replacement of old rusted flat iron clamp 370mm long made of FI 80 x 6mm with 25 / 50 mm dia hole in centre and fixing of 25 / 50 mm socket on clamp for fixing of GI pipe and two holes on each end of clamp for fixing of nut, bolt and washer including smith and lathe work for making the desired curve on flat iron suitable for fixing on 150 mm internal dia pipe mains complete all as specified and directed by Engr-in-Charge.

M&L for replacement of old rusted flat iron clamp 370 mm long, made of FI 65 x 6 mm with 20 /15 mm hole in centre of the clamp and fixing of 20 / 15 mm socket on clamp for fixing of GI pipe and two holes on each end of clamp for fixing of nut, bolt and washer including smith and lathe work for making the curve on flat iron suitable for fixing on 150 mm internal dia pipe mains complete all as specified and directed by Engr-in-Charge.

M&L for replacement of old rusted flat iron clamp 270mm long made of FI 80 x 6mm with 25 / 50 mm dia hole in centre and fixing of 25 / 50 mm socket on clamp for fixing of GI pipe and two holes on each end of clamp for fixing of nut, bolt and washer including smith and lathe work for making the desired curve on flat iron suitable for fixing on 100 mm internal dia pipe mains complete all as specified and directed by Engr-in-Charge.

M&L for replacement of old rusted flat iron clamp 270 mm long, made of FI 65 x 6 mm with 20 /15 mm hole in centre of the clamp and fixing of 20 / 15 mm socket on clamp for fixing of GI pipe and two holes on each end of clamp for fixing of nut, bolt and washer including smith and lathe work for making the curve on flat iron suitable for fixing on 100 mm internal dia pipe mains complete all as specified and directed by Engr-in-Charge.

S&F in replacement, 15mm dia bore gun metal globe or gate valve 'ISI marked' with iron wheel head, screwed both ends for iron pipe complete all as specified and directed by Engr-in-Charge.

All as per Srl item No. 21.00 here-in-before but 20 mm dia bore gun metal globe or gate valve.

All as per Srl item No. 21.00 here-in-before but 25 mm dia bore gun metal globe or gate valve.

All as per Srl item No. 21.00 here-in-before but 50 mm dia bore gun metal globe or gate valve.

Excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth for taking out / laying of water supply pipe line in soft/loose soil including taking out excavated soil and forming bottom etc complete all as specified and directed by Engr-in-Charge.

Returning filling in, including,spreading, levelling, watering and well ramming in layers n.exc 25 cm with soil obtained from excavation complete all as specified directed.

Removing excavated surplus soil to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

S&F in replacement, 16 Sqmm 3 core flat submersible cable PVC insulated and sheathed multistranded copper conductor complete all as specified and directed by Engr-in-Charge.

M&L for replacement of gland packing, nut - bolts and washer of 150mm dia bore sluice valve complete all as specified and directed by Engr-in-Charge

M&L for replacement of gun metal check nut of 150mm dia bore sluice valve complete all as specified and directed by Engr-in-Charge

M&L for replacement of existing size gun metal spindle of 150mm dia bore sluice valve complete all as specified and directed by Engr-in-Charge

M&L for packing pea gravel of size 2 to 4 mm of natural shape, brought direct from river bed and packing around the assembly of borewell complete all as specified and directed by Engr-in-Charge

Supply only sodium hypochloride liquid (chlorine content 10%) duly packed in sealed drum complete all as specified and directed by Engr-in-Charge.

M&L for replacement of 6mm thick rubber gasket packing with nut, bolt and washer consisting of 8/6 holes at each flanged joint of 150 mm dia column pipe including lifting and lowering of 150mm column pipe along with motor pump from deep borewell having 300 mm casing pipe complete all as specified and directed by Engr-in-Charge.

M&L for cleaning of internal surfaces of RCC overhead reservoir of capacity 100000 gallons on upto 21 metre high staging including removing deposits, sand etc from inside the tank, scrubbing and washing side walls and bottom of inside tank with bleaching powder solution and making surface free from any fungus/ algae / vegetation etc, filling of cavities inside of tank with cement mortar (1:3) mixed with quick settling chemical and applying one coat of white wash inside dome. Cleaning of washout system as required for proper flushing out of dirts / deposits of over head tank. Writing date of cleaning outside the tank complete all as specified and directed by Engr-in-Charge. Note :- (i) All type of materials, T&P and Labour etc as required shall be arranged by the contractor and the cost of the same shall be deemed included in the quoted rate. (ii) All the waste materials shall be disposed off at appropriate location upto 50 m outside the installation compound as & where directed by Engr-in-Charge

All as per Srl Item No. 35.00 here-in-before but RCC OH reservoir of capacity 50000 gallons complete all as specified and directed by Engr-in-Charge.

Collection of water sample of bore wells located in different pockets of Ayodhya Cantt area in decontaminated sterilised bottles and testing of water sample for following essential parameters for drinking water as per IS:10500- 2012 from Govt Lab or NABL accredited laboratory complete all as specified and directed by Engr-in-Charge: - (i) Colour (ii) Odour (iii) Taste (iv) pH value, (v) Turbidity (vi) TDS (vii) Total arsenic (viii) Silica (ix) Fluoride (x) Iron (xi) Magnesium (xii) Sulphate (xiii) Total hardness (xiv) Total alkalinity (xv) Calcium (xvi) Conductivity (xvii) Chloride (xviii) Total Coliform and (xix) E Coli.

Repair and maintenance of submersible pump set any make & model of capacity upto 45 HP including required repairing if any like motor rewinding, replacement of minor spares like CI/ MS bowl (As per existing size), stainless steel shaft with key, stainless steel sleeve, sand guard ,impeller lock with key, neck ring (as per existing size and type), stainless Steel thrust bearing, carbon plate, gun Metal bush, rubber bush, upper housing, lower housing, housing & sleeve repairing on Lathe, rubber gasket, nut bolt and testing after servicing complete all as specified and directed by Engr-in-Charge. [Note: All type of T&P like chain pully block etc and lifting and lowering of motor pump along with column pipe from deep borewellout required at site will be arranged by the contractor and rates for the same deemed to be included in the quoted rate.]

Repair and maintenance of defective Monoblock motor pump of any make & model of capacity upto 10 HP including required repairs like motor rewinding, replacement of minor spares such as Motor bearing, Gland packing, Fan motor blade, Packing paper, Water seal, Starting Coil, Motor housing, SS sleeve repairing on Lathe, Impeller Brass, Gun Metal Bush, Rubber Coupling Set, Rubber bush, Rubber gasket, nut & bolt and any other minor connected items and testing after repairing including painting complete all as specified and directed by Engr-in-Charge. Note:- All T&P including dismantling and fixing at site shall be arranged by the contractor and the cost shall be deemed included in the quoted rate.

M&L for 02 Nos dispaly board for two way of 3 mm thick mild steel sheet of size 1.20 m x 1.00 m, welded on angle iron frame of same size of using angle iron 30 x 30 x 3mm with 3 mm thick flat iron in cross, fixed with necessary nut, bolt and washer on 4 mm thick mild steel U channel of size 70 x 35 mm of 2.5 m length (0.5 m below ground level) with necessary excavation and PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in foundation, filling & mass concrete, fair finished on exp[osed surfaces including two coats of synthetic enamel paint (blue on dispaly board and black on U shaped channel) over a coat of red oxide primer and writing of pump house No., location, office name, area etc in suitable font in white colour synthetic enamel paint on display board complete all as specified and directed by Engr-in-Charge.

Taking out 20mm dia bore steel water tubing / uPVC including fittings and S&F new 20mm dia bore uPVC pipes ISI marked, best quality, fixed to walls, ceilings or laid in floors etc, complete all as specified and directed by Engr-in-Charge

His And Her Enterprises

Khan Brothers

Jairajyadav security services

m/s allied enterprises

M/S AVADH ENTERPRISES

Puma Power