Installation of Crash Barriers and Road Signages on Teetwal to Tarbansiory Seemari road Package No JK0865 under Road Safety Plan 2026 27

Earth work in bulk excavation by manual means over areas (exceeding 30 cm indepth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earthlead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge:All kinds of soil

Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and erecting W metal beam crash barrier comprising 3mm thick corrugated sheet metal beam rail, 70 cm above road/ground level fixed on ISMC series channel vertical posts,150X75X5 mm spaced 1.80 M high, 110 cm below ground level all steel parts and fitments to be galvanised by hot dip process , all fittings to confirm to IS 1367 and IS 1364 metal beam rail to be fixed on vertical posts with spacer channel section 150X75X50 mm, 330 mm long complete as per clause 810.

Manufacturing supplying and fixing retro reflective sign boards made upof 2mm thick aluminum sheet, face to be fully covered with high intensityencapsulated type heat activated retro reflective sheeting conforming totype-IV of ASTM-D-4956-01 in blue and silver white or other colourcombination including subject matter, message (bi-lingual), symbols andborders etc. as per IRC : 67-2001, pasted on substrate by an adhesivebacking which shall be activated by applying heat and pressureconforming to class -2 of ASTM-D-4956-01 and fixing the same withsuitable sized aluminum alloy rivets @ 20cm c/c to back support frame ofM.S. angle iron of size 25x25x3mm along with theft resistant measuresmounted and fixed with 2 nos. M.S. angles of size 35x35x5mm to avertical post made upto M.S. Tee section ISMT 50x50x6mm welded withbase plate of size 100x100x5mm at the bottom end and including makingholes in pipes, angle flats, providing and fixing M.S. message plate ofrequired size steel work to be painted with two or more coats of syntheticenamel paint of required shade and of approved brand & manufacture overpriming coat of zinc chromate yellow primer (vertical M.S.-Tee support tobe painted in black and white colours). Backside of aluminum sheet to bepainted with two or more coats of epoxy paint over and includingappropriate priming coats including all leads and lifts etc. complete as perdrawing, specification and direction of Engineer-in-charge (i). Mandatory/Regulatory sign boards of 900 mm diameter withpart as length of 3750 mm

(ii). Cautionary/warning sign boards of equilateral triangular shapehaving each side of 900 mm support length of 3650mm

Providing and fixing high-intensity retro-reflective film/sheeting(3mm thick and mm wide) of approved make and colour, conforming to relevant IRC/MoRTH specifications, on existing delineators, sign posts, crash barriers and other road furniture, including cleaning/preparation of surface, cutting to required size, application with approved adhesive, pressing and all labour, materials, tools and incidentals complete