SPECIAL REPAIR TO BLDG NO P 199 (JCOs QTRS) AND P-203 (OR QTRS) OF 506 ABW UNDER AGE BR-II OF GE (EAST) JABALPUR

Amount

Removal of existing detoriated decayed tarfelt or any other treatement incl PCC padding, loose surface and removing the debris to a distance n exc 500 mtr depositing where directed complete all as specified.

Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles.

Demolition of PCC (unreinforced) below or above ground level n exc 15 cm thickness and removing rubbish to a distance exc 50 m at low laying area complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc.

Dismantling of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar.

M&L for Modular fly ash brickwork with straight or curved on plan exc 6 m mean radius, built in CM (1:6) complete all as specified and directed.

M&L plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone agg) as in filling under undulation of roof top/chajja/beam etc with and incl necessary formwork complete all as specified and directed.

M&L Water proofing treatment on roof surface (Horizontal & Vertical surfaces) in following sequence through manufacturer/authorized applicator of the manufacturer including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces complete.

M&L 10 mm thick rendering on roof surfaces/concrete surface in CM 1:4 complete all as specified and directed.

Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm

Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces.

Laying 3 mm thick unrolled over the bitumen coated surface, polymeric water proofing membrane Hyperplas standard wt not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction.

Supplying only Integral waterproofing compound complete all as specified and directed (ISI Mark).

S&F Cement concrete tiles 25cm x 25cm x22mm thick, with grey cement & no pigment machine pressed; set, jointed & pointed in neat cement slurry in floors, & cut & polished over 20mm thick screed in CM(1:6) & joint filling by poly salphate base cement mortar (1:2 )and matching with exiting surface complete all as specified and directed.

Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome.

M&L Rendering 15mm thick on brick work or concrete surfaces of wall in CM (1:4) in two coats of 10 mm first coat (incl dubbing coat finished even and smooth witout using extra cement and 5 mm final coat . both coat mixed with WPC finished even & smooth (without using extra lime or cement). Note :- WPC shall be measured and paid seperately under relevant item here-in-before.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling.

M&L 75mm thick PCC type C-2, (1:3:6) using 40 mm graded stone aggregate as in plinth protection finished even and fair incl expansion joint at every 3m interval and every corner complete all as specified and directed.

M&L Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed andsealed with sealing compound, Grade ‘A’.

Taking down existing loose plaster & Clean rusted reinforcement and exposed concrete surface by sandblasting mechanical devices or any other estabilis-hed methods and follwing stage complete :- (a) Application of two coats of mineral based polymer modified corrosion inhibiting primer Colusal MK +Colusal 25. (b) Application of two component polymer based bond coat Zentrifix HB+Natufill BB2 or mortar low permeability or guinting with guniting aid. (c) Application Application of carbonation resistant, polymer modified reeady to ise fine mortar, Nafuquick +natufill BB2 or Zen-trifix F82+Nafufill BB2 Over the whole surface. Make : MC or equivalent.

M&L PCC in foundations, filling and mass-concrete type E2(1:5:10) using 40 mm graded stone aggregate complete all as specified and directed.

S&F GI Tubes, `medium grade' with all fitting; laid in trenches of 40 mm bore with all fitting as in spout pipe 450mm long and embeded in PCC 1:2:4 as directed by Engr-in-charge at bottom slab level all as specified.

M&L 40 mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate finishing cement concrete surface even and rough complete all as specified and directed.

S&F Coloured Non Skid ceramic tiles 7 to 8 mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6) complete all as specified and directed.

S&F Coloured Non Skid ceramic tiles 7 to 8 mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6) complete all as specified and directed.

S&F Coloured Glazed ceramic tiles in vertical surfaces 350 x 250mm x 7mm/450 x 300x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick plaster in CM(1:4) on fair face of brick or concrete surface.

Same all as Item Srl No 24 here-in-before but skirting use.

Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete .

M&L Single pice Machine cut kota stone slab flooring 20-25mm thick over 20mm thick screed in CM(1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including moulding rubbing & mirror polishing complete all as specified and directed.

M&L single pice Kota stone slab 20-25mm thick in riser of steps, skirting, dado & pillar over 10mm thick plater in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including moulding, rubbing & mirror polishing complete.

M&L Machine cut kota stone slab flooring 20-25mm thick over 20mm thick screed in CM(1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including moulding rubbing & mirror polishing complete.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15 mm boreGI tubes, 'medium grade' galvanised, with all fitting and fixed complete tincl cutting chaising pinning and making good to walls and ceiling or laid in floors.

Refixing old 15 mm dia steel tubing and connections in new or old position (wall, ceilling, floor etc).

S&F 20 mm bore GI tubes, 'medium grade' galvanised, with all fitting and fixed complete tincl cutting chaising pinning and making good to walls and ceiling or laid in floors.

Refixing old 20 mm dia steel tubing and connections in new or old position (wall,ceilling,floor etc).

Taking up or down 40mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 40 mm bore GI tubes, 'medium grade' galvanised, with all fitting and fixed complete tincl cutting chaising pinning and making good to walls and ceiling or laid in floors.

S&F in repair 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

S&F in repair Stop valves 40 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

S&F in repair bib tap fancy type chromium plated screwed for iron pipe of 15mm bore complete all as specified and directed.

S&F in repair Angle valves 15 mm bore fancy type, CP, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs Vitreous China squatting pan, `Orrisa' pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern & flush pipe) incl cement concrete bedding.

S&F in repairs Vitreous China wash basin, white, flat back, size 550 x 400mm excluding taps, waste chain & plug & porcelain stopper but including brackets.

S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 litr capacity, low level, white, with intel, ball valve, float & handle including brackets.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm (Make- Nirali, Model Olympia or equivalent of Prayag).

S&F in repairs CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe.

S&F in repairs Brass CP shower rose 125mm size.

S&F PVC connections 15mm size with PTMT nuts of length 450mm.

M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement.

S&F Grating doom 100 mm dia of PTMT (min. weight 25 gms).

Dismantling water tanks & removing to store exc 250 & n exc 500 litres.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 500 Ltrs Capacity.

S&F Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe & fixed. (minimum weight 20mm-210 gms).

Taking down Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames).

Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames).

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each.

S&F pressed steel frame made out of MS sheet 1.25 mm thick of size 105 x 60 mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and all as specified. all as specified.

S&F pressed steel frame made out of MS sheet 1.25 mm thick of size 125 x 60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats andall as specified. all as specified.

S&F Plain framed, panelled shutter 35 mm thick (two panel) with lock rail & panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. 2nd Class HW rail & style of size as per IS: 1003 (Part I), kiln seasoned & chemically pressure treated.

S&F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. , edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sash bar any numbers.

S&F in repair Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 300 mm long complete.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, in opening as per specification & drawing.

S&F Factory made solid panel PVC door shutter30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stilesand plain colour PVC sheets for top rail, lock rail & bottom rail on either side & asgap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to befitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheetbeading, and joined together with solvent cement, sup pling & fixing in the frame atsite as per specification & drawing.

S&F Steel windows with side hung shutters including Box type hinges with steel handle, & steel peg stay, complete with glazing bars, dovetailed or welded.

S&F Steel windows with side hung shutters including Box type hinges with steel handle, & steel peg stay, complete without glazing bars, dovetailed or welded.

S&F Steel ventilators with top hung shutter including hinges,steel peg stay, complete

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165.

S&F MS for hold fast complete all as specified and directed. Note: The hold fast shall be treated in two coats of tar and the the cost for the same shall be included in the quoted rate.

S&F Sheet glass 3.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with bead incl Sheet glass 3.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane.

S&F Figured glass 3.0mm thick, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples.

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples.

S&F Aluminium handles 150mm size, cast type, anodised.

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section.

Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed,

S&F Butt hinges 100mm size, medium weight, cold rolled mild steel.

S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy.

S&F Hasp & staple, safety type, brass with mild steel hinge pin including bolt to hinge plate with screws 100mm size.

S&F Aluminium anodised Tubular towel rail 20mm dia, D type, 60cm long between flanges incl bracket etc. fixed in repair.

S&F in repair Curtain dropary 25 mm dia PVC Coating mild steel fancy type rod of fancy type approved quality etc complete.

S&F in repair mild steel facny type Nobs and bracket and incl all necassary fitting complete all as specified and directed.

Supply & Fixing 'in repair' 18 mm thick, PVC sheet one side prelaminated of approved texture ("Celuca ply of Rajshree make or equivalent in "Sintex" as approved by GE ) as in cupboard (door shutter & shelves and partitions) as per manuacturer's instructions complete all as specified & directed.

S&F 40 mm dia , brass cupboard knobs fixed with nut, screw and washer of mild steel bright complete.

S&F Mortice lock, vertical type size 100 mm 4 lever Make- Godrej as complete all as specified and directed.

S&F Butt hinges medium weight cold rolled staineles steel 75 mm long complete.

Applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer.

Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome.

Applying one coat of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface.

Applying one coat of synthetic enamel paint on steel surface of any description, not otherwise described, over 10 cm width or grith including preparation of old painted surface.

Demolition & breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in CM Internal dia of pipe 100 mm.

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors.

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 110mm dia.

S&F PVC (SWR) bends any radius 110mm dia.

S&F PVC (SWR) bends any radius 75mm dia.

S&F PVC (SWR) vent cowl 75mm dia.

S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or un equal of 75 mm bore of pipe complete all as specified and directed.

M&L for preparation of new plastered surface of wall and aplying two coats of OBD over 2mm thick wall care putty on wall complete all as specified and directed.

M&L complete removal of existing surface of wall and applying two coat of oil bond distamper over 2mm thick wall care putty complete all as specified and directed.

M&L for applying two coats of cement base paint and one coat primer , over a coat of white cement on new wall surface including preparation of surface.

M&L for complete removal of existing surface of wall and applying two coats of cement base paint, over a coat of white cement primer complete all as specified and directed.

M&L for preparition of surface and applying two coats of white wash on and one coat prime wall surface including preparation of surface.

M&L for applying three coats of white wash on new Ceiling surface including preparation of surface.

M&L for applying one coat of white wash on ceiling surface including preparation of surface.

M&L PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate.

M&L colour Chequered cement concrete tiles glossy finish 30cm x 30cm x 30mm thick with grey cement and pigment , set, jointed filling match with exiting colour & pointed in neat cement slurry in floors with grey cement & pigment over 15mm thick screed in CM(1:6).

S&F in repair steel plate rack size 975x750x300mm as specified and directed.

Demolition of RCC of any description & in any position not otherwise specifically provided for and removing rubbish to a distance exc 50m at low laying area complete all as specified and directed.

M&L RCC type B1 (1:1.5:3) using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat.

M&L Mild steel TMT bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality.

Taking down carefully aluminium/copper point wiring for light, fan, bell, socket of point complete fittings such as switches. Ceiling roses, pendents, Regulator Socket etc complete at site and making goods disturbed surfaces of walls, floors etc.

Point wiring PVC insulated and PVC sheathed multistranded FRLS copper conductor cable of size 1.5 Sqmm including in concealed PVC conduit fittings and making good to the disturbed surfaces with continuous earth wire of copper 1.5 Sqmm dia to common earth including Provn of 3mm thick plastic laminated sheet of appropriate size and fixing to existing CI/MS boxes for mounting of accessories like surfaces sockets and regulators complete all as specified :-

One light/fan/bell point controlled by one way switch.

One 5 pin socket outlet 5 Amps on independent board.

One 5 pin socket outlet 5 amps on same board.

Same all as Item Srl No 117 here-in-before but wiring with 2.5 Sqmm FRLS copper wire including earth wire 2.5 Sqmm of copper for 15 Amps 3 pin socket outlet and –ditto-.

M&L for sub main wiring with two run of 2.5 sqmm single core multi stranded PVC insulated and unsheathed copper conductor (red for phase and black for neutral) of grade 1100 volt FRLS cable in and including electrical grade PVC conduits of desired colour not less than1.2 mm thick and 25 mm wide & 1.5 sqmm copper conductor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth dolly complete all as specified and as directed incl taking down old unserviceable one. Note :- Two wires of 2.5 Sqmm and onw wire of 1.2 Sqmm and one run of PVC conduit shall be measured as one unit.

Supply and fix 16 Amps rating 2P+E Industrial wall mounted plug socket suitable for IP44 degree of protection complete all as specified and directed.

S &F Modular Switch piano single pole one way 6 amps complete all as specified. Make : Havells/Indo Asian/Anchor.

S &F Modular Socket out let 2 in one, 5/3 pin flush type single pole one way 6 amps complete all as specified. Make : Havells/Indo Asian/Anchor.

S &F Modular Switch piano single pole one way 6/16 amps complete all as specified. Make : Havells/Indo Asian/Anchor.

S &F Modular Socket out let 2 in one, 5/3 pin flush type single pole one way 6/16 amps complete all as specified. Make : Havells/Indo Asian/Anchor

S &F Modular Electronic regulator 100/120 Watt step type complete all as specified. Make : Havells/Indo Asian/Anchor.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as per specified and directed by Engineer-in-charge. Make : Havells/Philips/Crompton/Bajaj.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete complete as specified and directed. Make : Havells/ Philips/ Crompton/ Bajaj.

Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. complete all as specified Make BAJAJ / WIPRO / HAVELLS / CROMPTON.

Supply and fixing LED lights fitting 1x 18 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make : Havells/Philips/Crompton/Bajaj.

Taking down carefully Ceiling fan/ Ex Fans, complete fittings at site removing Fans are diposited to E&M store for keeping in safe custody for re-use at site .

Hanging only ceiling fan (M.D supply) and connecting up including provision of cable from ceiling rose or connector to fan.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. connecting up with twin core twisted flexible copper conductor cable all as directed. Make : Havells/Philips/Crompton/ Bajaj.

S&F electric bell 230 volts Ding Dong.

S&F switch bell push modular single pole one way 5 amp.

Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings with 9 watt LED bulb glass type complete.

Supply and fixing Exhaust fan steel body AC single phase 230 Volts of size 300mm sweep with louvre and making hole in the wall /grounting bolts and plastering work all as specified and directed. Make : Havells/Philips/Crompton.

M&L ceiling rose, surface bakelite three terminal.

Supplying and fixed in repair sheet metal enclosure for DB’s when MCB’s to be used of 240 volt 8 way with 200 amps rated bus bar SPN double door complete all as specified and directed.

S & F in repair MCB single pole 6 amps to 32 amps, C series complete all as specified and directed.

S& F in repair MCB single pole & Neutral 6 amps to 32 amps , C series complete all as specified and directed.

Material and labour for distribution board made out of CRCA sheet including fixing in the wall, cutting chases grounting and necessary patch work and white wash to match with the existing including making connections all as directed containing the folowings :-

(a) MCCB 4 Pole 100 Amps 16 KA breaking capacity with thermal release 01 No (In coming).

(b) Bus bar 300 Amp rated made out of Aluminium insulated with adhesive tape RYB & black (4 Nos).

Supply and laying cable XLPE insulated screened PVC bedded, galvanised steel strip or wire ,armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor 50 Sqmm 3.5 core.

Excavation in trenches in soft loose soil including cutting road surfaces n.exc 1.5 mtr wide and n.exc. 1.5 mtr in depth for poles, stay, cable, pipe etc getting out all as specified.

Returning filling including spreading and well ramming in layers each n.exc 25 cm thick in soft loose soil all as specified.

Removal of surplus/spoil on a distance n.exc 25 cm thick in soft loose soil all as specified.

Supplying and laying un-reinforced precast concrete cable cover, class HVP, type 1 with peak, size 300mm x 180mm x 40mm laid in trenches for under ground cable all as specified.

M&L for Sand cushioning trenches using fine sand to under ground cable, laid in two layers 15cm before laying the cable & 8cm after laying the cable complete all as specified.

M&L for cable protection GI tubing light grade fixed long the pole/under road/along the wall of size 50 mm bore with necessary clamps all as directed.

M&L for Earthing complete with galvanized steel earth plate electrods of size 60cm x 60cm x 6mm thick burried directly in ground vertically(earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.50 mtr below normal ground level connected to galvanised iron strip 32 x 6 mm as earthing lead. by means of bolts nuts check nuts and GI washers of Galvanised iron protected by steel pipe 15mm (light grade) all as shown in elecrrical plate No. 3 of SSR Part-I and connecting to earthing test point (earth test point to be provided at 5 mtr distance from earth pit) and testing on completion including necessary excavation and earth work. The rate also include charcoal dust and comman salt in alternate layers 25 mm dia light grade GI pipe,funnel,wire mesh.concrete 1:3:6 type C-1 for pit and RCC pit cover. PCC pit shall be provided 50 cm away from earth pit and not on the earth pit itself. The extra cost of the watering pipe, bends, elbows shall be included in the unit rate. Note : RCC pit cover shall be precast of RCC 1:2:4 type B-1 80mm thick reinforced with XPM weighing not less than 4 Kg/Sqm.

Schedule of credit amount of Rs. 86,348.00.00 to be deducted during AOC

M/S BHATIA CONSTRUCTIONS

R R VISHWAKARMA CONSTRUCTION CO

MAYOOKH CONSTRUCTION

LAL SINGH & SONS