SPL REPAIR/ REPLACEMENT OF 185 CLING FANS AGAINST BER CLING FANS FOR OTM ACCN 1 BIHAR, PROVN OF SHED NEAR P-178 (15FT X 20 FT) OF2/5 GR (WATING SHED DNTAL SEC) AT KTOLI POCKET AND PATHWAY CONSTR 20 MTR INFRONT OF ENGR LINE GP HQ UNDER GE RANCHI

Amount

S&F ceiling fan 1200 mm sweep 3 blade 240 V star rated single phase icluding painting ledger number on the centre of fan, complete all as specified and directed. Make Havells/Bajaj/Crompton

Excavtion in post holes (or similar holes) each not exc. 0.50 cum in any kind of soil getting out, and removing surplus soil to a distance not exc. 25 mtr and making good of surfaces, complete all as specified and directed.

M&L PCC 1:3:6 type C2 ( using 40 mm graded aggregates) as in foundation filling and mass concrete.

Removing excavated material n.exc 50m and depositing where directed at a lavel .exc 1.50 mtr above the starting point.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil, complete all as specified and directed.

M & L Hardcore of broken stone gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L 100mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base for hardstanding.

M&L Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed.

M&L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick/concrete surfaces finished even and fair without using extra cement

M&L Rendering 10mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and fair without using extra cement

Preparation of new plastered surfaces of wall and applying three coats of white wash, complete all as specified and directed.

M & L Pre painted galvanised aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick, complete all as specified and directed.

S&F M S work in tubular trusses, vertical posts, purlins, rafters including special shaped washer etc. complete using mild steel sections or induction butt welded tubes conferming to IS 1161-1979 gde St.-240.

M&L wind ties for roof including securing bolts and all necessary drilling etc and similar work confirming to Fe-410-O or Fe-310-O

S&F Mild steel screw bolts (machine made) with hexagonal /square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut,length of bolt exc 5cm but n exc 10cm long dia of shank 5 to 10 mm

M&L coloured joints free non skid ceramic tiles, 6 to7 mm thick, edgeless , area of each tile exc 0.11 sqm but n. exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:4, complete all as specified and directed.

M&L 450x300x7 mm thick joints free glazed ceramic tiles colored as in dado/ skirting and vertical serfaces set&jointed in neat cement slurry and pointed in colored cement 0ver and incl 10 mm thick cement mortar 1:4, complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C-2 using 20mm graded stone aggregate as in floor/plinth protection laid in suitable panels of full width @ maximum 3mtr interval, finished even and fair all as spd . Joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 gde and three part of sand ( all by weight), complete all as specified and directed.

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

M&L cement concrete type D-2, 1:5:10 (40 mm graded aggregate) as in foundation.

M & L Brick wk with sub class ‘B’ bricks straight or curved on plan exc. 6m means radius in CM 1:4, complete all as specified and directed.

M&L Providing, cement concrete type B0 1:2:4 (12.5 mm graded aggregate) as in coping etc similar work, complete all as specified and directed.

M & L, 10mm thick rendering on fair faces of brick work/concrete surfaces of wall in CM (1:4) making surfaces finished even & fair, complete all as specified and directed.

M&L hardcore (Broken stone or boulders) of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L cement concrete type D-2, 1:4:8 (40 mm graded aggregate) 75 mm thick as in Sub-base of floor, complete all as specified and directed.

M & L machine pressed precast concrete interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade laid over sand cushioning.

M &L Sand filling under floors or in foundations including watering and consolidation.

M&L including preparation of newly plastered surfaces and applying three coats of white wash on walls.

S&F PVC (SWR) 110mm bore dia pipes single socketed, in any length with rubber ring joints, as in weep hole.

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 1.5 sqmm in casing/caping or conduit with fixing accessories, to be fixed , for one light /fan/bell point controlled by one switch withsunken box of suitable size incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly, complete all as specified and directed

All as per item No 30 above but for one 3/5 pin socket 5 Amp on independent board.with 1.5sqmmwire.

All as per item No 30 above but for one 3/5 pin socket 5 Amp on same board, with 1.5sqmmwire.

S&F switch piano flush type/Bell push, 5 Amps, single pole one way

S&F socket 5 pins, 6 Amp, flush type piano (multi purpose) ,

Supply & fixing 5 step fan regulator single pole, 240 Volts complete all as specified & directed.

S&F ceiling rose, surface backlite, 65x50mm, three terminals,

S&F LED bulkhead 10W with IP 65 protection 240V complete all as specified and directed

S&F 20W LED 6000K (4’) wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, complete all as specified and directed

S & Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 06 sq mm 2 core including taking down and laying with excavation, all laying mtrls, GI pipe, boring as per site requirment use for services connection as per specification, complete all as specifed and directed.

S & F single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 04 ways.

S&F MCB SPN 32 to 63Amps 415V incl all termnials, fitting etc.

S&F MCB SP 06 to 40 Amps 415V incl all termnials, fitting etc.

united builders